Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 10 of 10
Full-Text Articles in Mechanical Engineering
Design And Prototyping Of An Adjustable Putter, Daulton Morgan
Design And Prototyping Of An Adjustable Putter, Daulton Morgan
Industrial and Manufacturing Engineering
Being able to demo a golf putter is essential for a golfer since the feel of the putter is critical in determining what suits the golfer best. Due to the market being primarily dominated by right-handed players, it is difficult for left-handed players to demo high quality putters since the selection is sparse.
This report is about designing and integrating an interchangeable fastening system that allows a putter to be altered between a right and left-handed orientation, while still maintaining the traditional look of a putter. The report covers the necessary design steps, the prototyping of the putter, the projected …
Design And Validation Of An Electro-Hydraulic Pressure-Control Valve And Closed-Loop Controller, Jerry Boza
Design And Validation Of An Electro-Hydraulic Pressure-Control Valve And Closed-Loop Controller, Jerry Boza
Dissertations
Electro-hydraulic pressure-control valves are used in many applications, such as manufacturing equipment, agricultural machinery, and aircrafts to name a few. They are often used to actuate hydraulic clutches, such as those found in power shift transmissions. A traditional pressure-control valve with open-loop control algorithm is typically used in clutch applications. This scheme often results in inconsistent or undesirable system behavior due to the nature of open-loop control as well as the nonlinear system dynamics and uncertainties.
In this research two new electro-hydraulic pressure-control valves were designed in order to decouple the valve and control port (hydraulic) dynamics. This was achieved …
Optimal Design Of Automotive Exhaust Thermoelectric Generator (Aeteg), Hassan Fagehi
Optimal Design Of Automotive Exhaust Thermoelectric Generator (Aeteg), Hassan Fagehi
Masters Theses
A consumption of energy continues to increase at an exponential rate, especially in terms of automotive spark ignitions vehicles. About 40% of the applied fuel into a vehicle is lost as waste exhaust to the environment. The desire for improved fuel efficiency by recovering the exhaust waste heat in automobiles has become an important subject. The thermoelectric generator (TEG) has the potential to convert exhaust waste heat into electricity as long as it is improving fuel economy. The remarkable amount of research being conducted on TEGs indicates that this technology will have a bright future in terms of power generation. …
A Genetic Algorithm Incorporating Design Choice For The Preliminary Design Of Unmanned Aerial Vehicles, Kenneth Michael Mull
A Genetic Algorithm Incorporating Design Choice For The Preliminary Design Of Unmanned Aerial Vehicles, Kenneth Michael Mull
Masters Theses
Unmanned Aerial Vehicles (UAVs) are currently at the forefront of aerospace technologies. The design of these aircraft is complex and often performance characteristics are coupled to multiple design attributes. At the early design phase both discrete and continuous design choices are present limiting the feasibility of traditional derivative based optimization techniques. In place of these methods, the design space can be explored using a genetic algorithm that mimics the process of natural selection, providing a capable and reliable base airframe constructed from the required performance metrics. By incorporating a genetic multidisciplinary optimization algorithm early in the conceptual design phase, aircraft …
Design For Manufacturability: Off-Road Toyota Bumper, Drew Donlon
Design For Manufacturability: Off-Road Toyota Bumper, Drew Donlon
Industrial and Manufacturing Engineering
The purpose of this project is to design a new off-road bumper that is improved from the stock form of a 1996-2002 Toyota 4Runner and a 1996-2004 Toyota Tacoma. The current state of the component is too weak to endure to off-road endeavors, and a kit bumper market is virtually untapped for these vehicles. The objectives of this project were met by redesigning the stock front bumper, conducting a finite element analysis on the model to test for strength, prototyping the bumper with CNC cut cardboard, and conducting a full cost analysis including the costs for waterjet and laser cutting …
E-Learning Design For Microsoft Access & Asp.Net, Jonathan Choi, Christopher Hom
E-Learning Design For Microsoft Access & Asp.Net, Jonathan Choi, Christopher Hom
Industrial and Manufacturing Engineering
The problem definition is that the current video tutorial series is outdated and lacks interactive features that aid with E-Learning. The goal of the project is to create a platform that incorporates features such as structure, interaction, assessments, and competency tests. The project revolved around integrating four softwares together in order to create an effective E-Learning platform. The four softwares were Adobe Captivate, Camtasia, Microsoft Access and Microsoft Visual Studios. Adobe Captive is used to store the tutorial video and assign quizzes. Camtasia is used to record the tutorial videos. Microsoft Access is used to store all the questions given …
Automated Bearing Press, David Baker, David Brock, Engelbert Diec
Automated Bearing Press, David Baker, David Brock, Engelbert Diec
Mechanical Engineering
Our group was presented with a challenge to design an automated machine to replace Micro-Vu’s current manual pressing operation. We moved, planned, and scheduled our tasks for the three quarters we will be working on this project by using a Gantt chart. In designing the machine, we generated concepts and used analysis and prototyping to select the most promising ones. Our final design uses a pneumatic press to press the parts, and it includes magazines to hold the parts before pressing, pneumatic actuators to move the parts to and from the pressing location, and a lever to separate the defective …
Orchard Bin Atv Trailer, Neil F. Leitz
Orchard Bin Atv Trailer, Neil F. Leitz
All Undergraduate Projects
A local orchardist was experiencing a problem that was being caused by their lack of apple picking bin moving equipment. The orchardist needed a well-engineered solution to this lack of equipment. The solution arrived at was a five bin trailer. There were multiple design requirements for this trailer, including the device needing to be able to interface with an ATV, be able to be loaded by hand, be able to carry five bins, and not exceed a budget of $750. While perfecting the design of the trailer, a number of different disciplines were utilized, which included dynamics, kinematics, static loading …
Asme Mini Rc Baja: Drivetrain, Jason M. Moore
Asme Mini Rc Baja: Drivetrain, Jason M. Moore
All Undergraduate Projects
Title and author: ASME mini RC Baja Drivetrain by Jason Moore; partner Mike Cox. (Engineering Technologies, Safety, and Construction)
Abstract/Artists Statement: The issue that this project is concerned with is how to design and build a drivetrain, steering and suspension systems for an RC car. The systems must be simple and functional. Furthermore, these systems will be designed to fit on a small chassis and not interfere with each other. They also need to be strong and durable enough to propel the car forward and maneuver through various obstacles and be built in a way that is easy to take …
Design And Experimental Investigation Of An Oxy-Fuel Combustion System For Magnetohydrodynamic Power Extraction, Manuel Johannes Hernandez
Design And Experimental Investigation Of An Oxy-Fuel Combustion System For Magnetohydrodynamic Power Extraction, Manuel Johannes Hernandez
Open Access Theses & Dissertations
A general consensus in the scientific and research community is the need to restrict carbon emissions in energy systems. Therefore, extensive research efforts are underway to develop the next generation of energy systems. In the field of power generation, researchers are actively investigating novel methods to produce electricity in a cleaner, efficient form. Recently, Oxy-Combustion for magnetohydrodynamic power extraction has generated significant interest, since the idea was proposed as a method for clean power generation in coal and natural gas power plants. Oxy-combustion technologies have been proposed to provide high enthalpy, electrically conductive flows for direct conversion of electricity. Direct …