Mechanical Engineering Commons^™

Husker Motorsports Active Drag Reduction System, Creighton Hughes, Evan Killian, Micah Busboom, Aj Johnson, Jude Steffen

Honors Theses

Formula SAE is a multifaceted competition that involves student teams designing and competing with an open-wheel style race car. There are 5 different dynamic events included in the competition. Each event requires a unique aerodynamic setup to have the best performance possible. This design project focuses on a drag reduction system (DRS) that will improve aerodynamic performance, resulting in faster lap times and increased competitiveness. Key features include a direct electronic actuation mechanism that will allow the rear wing to be adjusted during a race. The benefits of the DRS system, include increased speed, improved handling, and greater fuel efficiency …

Stump Grinder Project, Wyatt Hopper

Honors Theses

This project covers the analysis of a Portable Stump Grinder device sponsored by private investors known as Gary and Carol Sherman, two farmers out of Lincoln, Nebraska. The ultimate goal of this project, in terms of the work we were assigned, was to provide the foundation work for future engineering teams to design and build the stump grinder for Gary and Carol Sherman.

Leadership And Project Management In Engineering: Baja Tube Bender, Maysyn Tm Sorensen

Honors Theses

Typical coursework for Undergraduate Mechanical Engineering students does not deeply focus on project management and leadership. Detailed in the following documentation is review of my Mechanical Engineering Senior Design capstone project as well as analysis of final presentations of other capstone projects. The Senior Design capstone projects spanned both semesters of the ‘22-’23 academic school year. After the first semester of my project I produced a post-mortem report to analyze the project’s progress and suggest improvements for the project, design, and team interaction. These improvements were compiled into an action plan and implemented in the spring semester. When the project …

Student Understanding Of Kinematics: A Qualitative Assessment, Andrew Cashman, Tom O'Mahony

Publications

In engineering, kinematics is widely regarded as a fundamental topic with the literature agreeing that students possess a wide range in understanding of the topic. This study aims to take a second-order approach by understanding and exploring the qualitatively different ways in which students approach solving kinematics problems. Phenomenography was used to collect data through ten semi-structured interviews with early-stage mechanical engineering students. Following data analysis, four distinct categories of students’ approaches were identified; unstructured, framing the problem, strategic, and conceptual. It was found that these categories could be arranged in a hierarchy and were also supported by secondary epistemic …

The Effect Of Store-To-Store Energy Transfers On The Global Dynamics Of Aircraft, Guilherme Mainieri Eymael

Honors Theses

This study analyzes the energy transfer mechanisms when nonlinear devices (stores) are attached to a linear model airplane. For that, a reduced-order model (ROM) was derived to simulate the first two flexible modes of vibration of the primary structure (aircraft) with one store in each wing. Each store can either be locked or unlocked. When locked, it only contributes as mass-effect, and when unlocked, it adds nonlinearity to the system. Simulations were then performed with either both stores locked, one store unlocked, or both stores unlocked. It was found that the attachment of nonlinear stores in the ROM changes the …

Development Of Controller Area Network Bus Programming For Quarter-Scale Tractor Pulling Sled, Brittani Wacker

Honors Theses

Usage of Controller Area Network (CAN) technology has allowed for advancements in many industries, including agriculture. Most importantly, its application is useful for refining data acquisition methods. With support from the Quarter-scale Tractor Design Team at UNL, this project united a CAN bus with the team’s current tractor pulling sled. The objectives were to install new instrumentation needed for the CAN bus and to program the updated system utilizing CAN data. The program needed to give the pulling sled functionality and the ability to read and log important pulling data. These goals were all accomplished by implementing new sensors, coding …

Can We Make Our Robot Play Soccer? Influence Of Collaborating With Preservice Teachers And Fifth Graders On Undergraduate Engineering Students' Learning During A Robotic Design Process (Work In Progress), Krishnanand Kaipa, Jennifer Kidd, Julia Noginova, Francisco Cima, Stacie Ringleb, Orlando Ayala, Pilar Pazos, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

This work-in-progress paper describes engineering students’ experiences in an NSF-funded project that partnered undergraduate engineering students with pre-service teachers to plan and deliver robotics lessons to fifth graders at a local school. This project aims to address an apparent gap between what is taught in academia and industry’s expectations of engineers to integrate perspectives from outside their field to solve modern societal problems requiring a multidisciplinary approach. Working in small teams over Zoom, participating engineering, education, and fifth grade students designed, built, and coded bio-inspired COVID companion robots. The goal for the engineering students was to build new interprofessional skills, …

Afloat 2021: American Floating Offshore Wind Technical Summit, Advanced Structures And Composites Center

General University of Maine Publications

Email invitation to the "AFloat 2021: American Floating Offshore Wind Technical Summit" scheduled for September 8 and 9, 2021. Due to the emergence of COVID variants and the health risks they pose, a decision was made to hold the event virtually to ensure everyone's safety.

The Influence Of Participation In A Multi-Disciplinary Collaborative Service Learning Project On The Effectiveness Of Team Members In A 100-Level Mechanical Engineering Class, Stacie I. Ringleb, Pilar Pazos, Julia Noginova, Francisco Cima, Orlando Ayala, Krishnanand Kaipa, Jennifer Kidd, Kristie Gutierrez

Mechanical & Aerospace Engineering Faculty Publications

Engineers need to develop professional skills, including the ability to work successfully in teams and to communicate within and outside of their discipline, in addition to required technical skills. A collaborative multi-disciplinary service learning project referred to as Ed+gineering was implemented in a 100-level mechanical engineering course. In this collaboration, mechanical engineering students, primarily in the second semester of their freshman year or first semester of their second year, worked over the course of a semester with education students taking a foundations course to develop and deliver engineering lessons to fourth or fifth graders. Students in comparison engineering classes worked …

Edalatpour Receives Nsf Career Award To Study Thermal Radiation In Quantum Materials And Quantum-Sized Distances, Marcus Wolf

General University of Maine Publications

Components the size of a few atoms, known as quantum materials, can enhance how technology functions and manages its heat. However, little is known about how heat is emitted and exchanged in quantum materials in contrast with their more common counterparts, three-dimensional bulk materials. Sheila Edalatpour, an assistant professor of mechanical engineering at the University of Maine, is studying how the emission of heat changes when the materials involved are quantum-sized, or when they are separated by a gap of the same size as one or multiple atoms.

Privileging Learning Over Numbers: Developing An Alternative Student Assessment In Engineering, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications and Presentations

In this research study, a new model to assess student performance and academic learning in engineering disciplines is proposed with the intention of shifting a grade driven mentality into a learning-oriented mindset. The rational for this model of assessment is to disrupt normalized assessment practices in higher education, reframe student thinking regarding learning and acquisition of knowledge, and encourage students to engage in coursework in meaningful ways. Unfortunately, grades in higher education have become a primary focal point for many students as a means to secure internship opportunities, undergraduate research, post-graduation employment, and graduate school acceptance into desired institutions. The …

Structuring Student Success: Incorporating A Genre-Based Pedagogical Method To Improve A Strength Of Materials Laboratory Manual, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications and Presentations

In this research study the authors incorporated a pedagogical technique to improve a strength of materials lab manual. The conceptualization and subsequent development of a student friendly lab manual resource emerged from students’ difficulty in understanding the following areas: introduction to experiment, procedures, calculations, and relevancy to class content. Based on a survey conducted before lab manual improvements and modifications, mechanical engineering students expressed high dissatisfaction with the written structure of the manual and felt they spent too much time understanding lab procedures, deciphering what equations to utilize to complete their analyzes, and completing the report. As such, the authors …

Expanding Engineering And Technology Opportunities To Students In The Border Region Through International Collaboration, Jesus A. Gonzalez-Rodriguez, Immanuel Edinbarough, Adriana Rios-Santiago, Anabel Pineda-Briseno

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Expanding Engineering and Technology Opportunities to Students in the Border Region through International Collaboration

For some years now, our Department of Engineering Technology of the XXXX, has collaborated with Universities across the southern border to carry out different activities such as undergraduate research, collaborative course-based projects, and senior design projects. We have observed how students benefit from being exposed to work in multidisciplinary and multicultural teams.

We now expand this form of work to a higher-level research collaboration where students and faculty from four different institutions participate. Two institutions of higher education in Mexico and a University and a Community …

Finding Balance: Examining The Impact Of Grades On Engineering Students' Well-Being, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications and Presentations

The authors conducted a preliminary research study to understand the emotional and academic impact grades have on engineering undergraduate students. Grades in higher education have become a priority for students to secure internship opportunities, post-graduation employment, and graduate school acceptance. However, students’ desire to attain high grades in engineering disciplines may lead to negative effects such as additional anxiety and increased mental exertion, physical exhaustion, and overall lack of work-life balance. A survey was conducted with a cohort of 45 students to understand their perspective on grades before, during, and at the end of the semester, and their responses to …

Implementation Of Visual Supplements To Strengthen Pedagogical Practices And Enhance The Physical Understanding Of Fundamental Concepts In Engineering Mechanics, Eleazar Marquez, Samuel Garcia, Samuel Molina

Mechanical Engineering Faculty Publications and Presentations

Mechanical Engineering is a discipline highly dependent on designing and implementing mechanical, thermal, or energy systems for the improvement of the human environment. Thus being a proficient Engineer involves having a strong mathematical background and a thorough physical understanding on how systems operate in order to apply analytical or numerical schemes during a design process. However, most of the students’ academic development is centered on deriving tedious equations and solving textbook problems, which are difficult to visualize and physically understand, and cloud their intuitive nature to comprehend a problem on its entirety. These conventional approaches and methods of disseminating content …

Cost Benefit Analysis Of Led Vs Florescent Lighting, Kurtis Clark, Phillip Humphrey

Student Research

Over the last few years, the state of Oklahoma has been looking at ways to reduce expenses to address concerns about a budget deficit. There have been efforts made to reduce expenses due to the use of energy. It has been said, when the lights are on, work is getting done. Running lights is therefore the cost of doing business. Our research examines the question, “is there a way to provide better lighting while operating at a lower cost.” This research examines the current lighting at Southwestern State University, primarily fluorescent lighting (FL), and a cost benefit analysis of switching …

Developing And Testing An Electronic Homework System To Improve Student Engagement And Learning In Engineering Thermodynamics, Stephen Crown, Constantine Tarawneh, Jazmin Ley

Mechanical Engineering Faculty Publications and Presentations

An electronic homework delivery system was developed for an advanced undergraduate engineering thermodynamics course due to limitations in available electronic homework systems. A commercially available system was effectively used in the introductory course for simple problems. The complexity of problems in the advanced course made adoption of the same system problematic as students needed feedback in the problem solving process. A system was devised that delivers individual problems to each student, provides feedback throughout the process, and records results for assessment. The system has helped students become more active in homework assignments in both completing assignments and in doing original …

Meng 3250: Mechanics Of Elastic Bodies—A Peer Review Of Teaching Project Benchmark Portfolio, Jinying Zhu

UNL Faculty Course Portfolios

This portfolio focuses on mechanics of materials (course title: Mechanics of Elastic Bodies), a sophomore level course taken primarily by civil engineering and architectural engineering majors on Omaha campus. It is a prerequisite for broad range of courses in mechanical, civil and agricultural engineering majors. This course studies the mechanics of solids with applications to science and engineering, including stress, strains and deformation in structural elements (axial, torsional and bending), shear and moment diagram for beams, and a brief introduction to material failure mechanisms.

This portfolio describes the teaching methods used to help students understand the fundamental knowledge about material …

Mech 350: Introduction To Dynamics And Controls Of Engineering Systems—A Peer Review Of Teaching Project Benchmark Portfolio, Benjamin S. Terry

UNL Faculty Course Portfolios

There are two purposes of this portfolio. The first purpose is to outline and explain my approach to teaching this classic and fundamental course. I highlight in detail the purpose and curricula, the desired outcomes, and the goals and objectives. I also describe how the course activities and my teaching methodology support the course objectives. The second purpose of this portfolio is to describe a simple course modification—the introduction of a recitation session—and to test in a preliminary way the effect of this change on students’ attitudes towards the examples worked out in class. The results show that in the …

Integrative Experiences Through Modeling And Simulation Of Mechatronic Systems, Mileta Tomovic, Cynthia Tomovic, Vukica M. Jovanovic, Cheng Y. Lin, Nan Yao, Petros J. Katsioloudis

Engineering Technology Faculty Publications

Learning is integrative lifelong process which requires continuous refreshing of old material and learning new material. This principle holds also for student experiences during their undergraduate studies. Students learn new material throughout their studies, and they may or may not have opportunity to use the material in different context and at different levels. As a result some of the acquired knowledge may be forgotten by the time student graduates or it may not be placed in the context of the overall program outcomes, thus material presented may not seem to have relevance to student's career. An effective method to address …

Mechanical Design Of Pird (Principal Investigator Rack Drawer) For Sofia, Hari Prasad Shetty Mr., Murali Krishna Kandlagunta Mrs., John Miles Mr., Zaheer Ali Mr.

STAR Program Research Presentations

SOFIA, the world’s largest airborne observatory with 2.5-meter diameter infrared telescope is equipped with 7 instruments: EXES, FIFI-LS, FLITECAM, FORCAST, GREAT, HAWC, and HIPO. Flying at altitudes between 39,000 and 45,000 feet, SOFIA avoids 99% of the atmospheric water vapor, records and analyzes the infrared radiation from the cosmos. SOFIA is able to observe the occultation of stars by solar system objects. By determining the size, compositions, and atmospheric structures of these objects, SOFIA can help answer the questions on creation and evolution of the universe, formation of the stars and planets, and nature of black hole at the center …

A Proposed Learner-Centered Mechatronics Engineering Instructional Program, Patrick N. Currier, Richard Goff, Janis Terpenny

Mechanical Engineering - Daytona Beach

This paper examines the need and requirements for a mechatronics degree program. The results of a survey of the few existing programs in this field are provided. Then, using a case study example for Virginia Tech, a proposed mechatronics curriculum based on a learner-centered paradigm is described. The curriculum combines existing courses in mechanical, electrical, and computer engineering with new, hands-on courses to provide students with a chance to practice and explore the subject matter in ways consistent with the demands of both industry and accreditation. This program, if implemented, could provide a university with a unique offering to attract …

Product Focused Freeform Fabrication Education, Frank W. Liou, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Presented in this paper is our experience of teaching freeform fabrication to students at the Missouri University of Science and Technology, and to high school students and teachers. The emphasis of the curriculum is exposing students to rapid product development technologies with the goal of creating awareness to emerging career opportunities in CAD/CAM. Starting from solid modeling, principles of freeform fabrication, to applications of rapid prototyping and manufacturing in industry sponsored product development projects, students can learn in-depth freeform fabrication technologies. Interactive course content with hands-on experience for product development is the key towards the success of the program.

The Party’S Over: Sustaining Support Programs When The Funding Is Done, John Gardner, Pat Pyke, Cheryl Schrader, Janet M. Callahan, Amy Moll

Mechanical and Biomedical Engineering Faculty Publications and Presentations

In the lifecycle of an engineering education grant, the phase where best practices are sustained and disseminated is perhaps the most crucial stage for maximizing impact. Yet this transition phase often receives the least attention as project team enthusiasm can wane, while funding tapers off, and faculty priorities are pulled in other directions. There are numerous obstacles associated with sustaining program changes, even those perceived as very valuable. Typical challenges are: What happens when the funding runs out? What grant-developed programs should be sustained by the university? Does the institution need to internally allocate resources in an annual budget large …

Using Basic Computer Aided Drafting And Design Courses At The Freshman Level To Improve Technology Students Competitiveness In Obtaining Early Academic Career Internships, Anthony Dean, Mustafa Moustafa, Julie Moustafa

Engineering Technology Faculty Publications

Many students have the desire to have internships and part-time employment during their academic careers. Often students in their freshman and sophomore years in four year engineering and technology programs find it difficult to be competitive against more senior students for these positions. This paper discusses how students, in the Mechanical Engineering Technology (MET) program at ________________University, through taking CAD and Solid Modeling courses early in their academic careers are well suited to be competitive in obtaining internships and part time employment. This paper discusses the MET programs first two years’ curriculum and how it prepares the students to enter …

An Interactive Visual Environment For Scientific Problem Solving, Georg F. Mauer

Mechanical Engineering Faculty Research

Science and engineering students do not typically receive explicit training in scientific problem solving, i.e. applying science principles to specific situations. Students’ problem solving skills often show little improvement throughout their course of studies. This paper describes a structured, graphical, interactive (GUI) learning environment, which presents problems and tools for analysis in systematic and logical order, and encourages the student to develop the solution path in the manner of an experienced expert. The learning environment’s subject area is Engineering Dynamics, which was selected for its systematic structure and its early (usually sophomore) place in the undergraduate curriculum. The software presents …

Meeting The Needs Of Industry: Development Of A Microcontroller Course For Mechanical Engineers, W. G. Culbreth

Mechanical Engineering Faculty Research

No abstract provided.

Report On The School Of Mechanical Engineering National Technical Center Saigon, South Vietnam, Myrne R. Riley

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

"Training in the discipline of Mechanical Engineering is offered in South Vietnam by the School of Mechanical Engineering, one of four engineering schools and a Merchant Marine School composing the National Technical Center located presently in the Phu Tho region of Saigon, South Vietnam. The school was established in 1956 for the training of engineers, for mechanical and industrial activities. It became part of the National Technical Center, established by Decree No. 213-Gd by the President of the Republic of Vietnam on June 29, 1957 and graduated the first class of 20 in the summer of 1960. The KS Degree, …