Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 8 of 8
Full-Text Articles in Mechanical Engineering
An Investigation And Understanding Of The Mechanical Response Of Palmyrah Timber, Hatim Sobier, Craig Menzemer, Tirumalai Srivatsan
An Investigation And Understanding Of The Mechanical Response Of Palmyrah Timber, Hatim Sobier, Craig Menzemer, Tirumalai Srivatsan
Craig Menzemer
The Palmyrah tree flourishes in tropical areas around South East Asia, and particularly in Sri Lanka. Palmyrah is an important economic resource for the region, and has found use in structural applications for both residential dwellings and commercial buildings. While there is a great deal of local field experience with Palmyrah, the mechanical properties have not been well characterized or understood. In an effort to assist engineers with the design and efficient use of the timber, a study was undertaken to evaluate the mechanical response of Palmyrah and develop estimates of design allowable properties. Properties evaluated include static bending strength, …
Mechanical Properties Of Intermetallic Compounds In Electrodeposited Multilayered Thin Film At Small Scale By Nanoindentation
Faculty of Engineering University of Malaya
Mechanical properties of intermetallic compounds (IMCs) which were formed in electrodeposited Cu/Sn and Cu/Ni/Sn multilayered thin film have been investigated. The layers of Cu, Sn and Ni were formed by electrodeposition technique using copper pyrophosphate, tin methanesulfonic and nickel Watts baths, respectively. After synthesis, samples were subjected to high temperature aging at 150 degrees C for 168 h. Two different types of intermetallics Cu3Sn and Cu6Sn5 were formed in Cu/Sn. After adding ultra-thin layer of Ni (70 nm) in between Cu and Sn layers, (Cu, Ni)(6)Sn-5 was formed after aging at similar condition to that of Cu/Sn. Tin whisker growth …
Joints Properties Of One Side Welded Of Ship Materials With Variation Of Angle Groove, Innovative Research Publications Irp India, Yustiasih Purwaningrum, Triyono No, Tri Syarifuddin, Isharyadi Di
Joints Properties Of One Side Welded Of Ship Materials With Variation Of Angle Groove, Innovative Research Publications Irp India, Yustiasih Purwaningrum, Triyono No, Tri Syarifuddin, Isharyadi Di
Innovative Research Publications IRP India
Indonesian National Transportation Safety Commission based on data from the period 2003-2008 and The Study for the Maritime Traffic Safety System Development Plan states that 21% of the cause of the accident was the failure of Indonesian ship in the structure of the ship (hull structure). This study aimed to investigate the effect of variations in the angle groove of one side welding. Material used is low carbon steel LR grade A in a thickness 12 mm were welded using GMAW (Gas Metal Arc Welding) with a angle groove 20°, 40° and 60°. The physical properties examined with an optical …
Modeling Of Electromechanical Behavior Of Woven Sic/Sic Composites, Xhenhai Xia, Thanyawalai Sujidkul, Jianbing Niu, Craig Smith, Gregory Morscher
Modeling Of Electromechanical Behavior Of Woven Sic/Sic Composites, Xhenhai Xia, Thanyawalai Sujidkul, Jianbing Niu, Craig Smith, Gregory Morscher
Dr. Gregory N. Morscher
A coupled electro-mechanical model was developed to predict the mechanical behavior of woven SiC/SiC ceramic matrix composites and electrical resistance response to mechanical damages in the composites. The matrix is explicitly included in the model such that the matrix cracking and fiber break can be linked to the electrical resistance change during loading. The results show that the electrical resistance increases linearly with an increase of matrix crack density and the number of fiber breaks. The predictions are compared to the experimental results on 2D woven SiC/SiC ceramic composites. With proper materials parameters input, the models can accurately predict the …
Sintering Behaviour Of Natural Porous Hydroxyapatite Derived From Bovine Bone
Sintering Behaviour Of Natural Porous Hydroxyapatite Derived From Bovine Bone
Faculty of Engineering University of Malaya
The aim of this research is to study the properties of natural porous hydroxyapatite developed from bovine bone through a sintering process. Bovine bone samples were prepared and sintered in an air atmosphere at different temperatures ranging from 600 degrees C to 1000 degrees C. The sintered bodies were characterized to determine the phases present, bulk density, Ca/P ratio and Vickers hardness. In addition, the microstructural evolution of the sintered porous bodies was also examined. The results revealed that the thermal stability of the HA matrix was not disrupted and that all of the sintered bodies exhibited phase pure HA. …
Sintering Behaviour Of Natural Porous Hydroxyapatite Derived From Bovine Bone
Sintering Behaviour Of Natural Porous Hydroxyapatite Derived From Bovine Bone
Faculty of Engineering University of Malaya
The aim of this research is to study the properties of natural porous hydroxyapatite developed from bovine bone through a sintering process. Bovine bone samples were prepared and sintered in an air atmosphere at different temperatures ranging from 600 degrees C to 1000 degrees C. The sintered bodies were characterized to determine the phases present, bulk density, Ca/P ratio and Vickers hardness. In addition, the microstructural evolution of the sintered porous bodies was also examined. The results revealed that the thermal stability of the HA matrix was not disrupted and that all of the sintered bodies exhibited phase pure HA. …
Alternative Methods To Determine The Elastoplastic Properties Of Sintered Hydroxyapatite From Nanoindentation Testing
Faculty of Engineering University of Malaya
This study introduces alternative methods to determine the elastoplastic properties of bovine-derived Hydroxyapatite (HA) porous bone graft through a set of nanoindentation tests with a Berkovich indenter. Generally, experimental data obtained from nanoindentation tests are force displacement, hardness and elastic modulus. However, to determine plastic properties such as strength coefficient and work hardening exponent of bovine HA, analytical or inverse finite element models are required. In this paper, the effect of sintering temperature on these properties of HA is studied for the range of 1000-1400 degrees C. The direct and inverse Finite Element (FE) simulation models for nanoindentation tests were …
Properties Of Zn-Bi Composite Coatings Prepared By Ionic Co-Discharge Deposition
Properties Of Zn-Bi Composite Coatings Prepared By Ionic Co-Discharge Deposition
Faculty of Engineering University of Malaya
Zn-Bi composite was synthesized by ionic co-discharge deposition and its properties were investigated. The results show that the Zn-Bi composite with the incorporation of Bi has a finer grain size than the pure Zn coating and improves the mechanical properties. The microhardness is increased by approximately two times simply by adding a small amount of Bi electrolyte into a Zn bath solution. A lower volume loss of the Zn-Bi composite coating compared with the pure Zn coating also indicates that the Zn-Bi coating has a better wear resistance. Link to Full-Text Articles : http://www.sciencedirect.com/science/article/pii/S1003632615635968