Mechanical Engineering Commons^™

Data From: Computational Fluid Dynamics Benchmark Validation Experiment Of Plenum-To-Plenum Flow Through Vertical Heated Parallel Channels, Austin W. Parker, Barton L. Smith

Browse all Datasets

This research is focused on the thermal mixing region of parallel jets entering an upper plenum. The highly-coupled thermal-fluid physics are relevant to plenum-to-plenum flow in High Temperature Gas Reactors such as thermal striping phenomena. Experimentally measured boundary conditions and system response quantities for use in Computational Fluid Dynamics were tabulated and published for public use.

Modeling And Simulation Of A Supercritical Co2-Liquid Sodium Compact Heat Exchanger For Sodium Fast Reactors, Hailei Wang, Sean M. Kissick

Mechanical and Aerospace Engineering Faculty Publications

The study focuses on modeling and simulations of sodium-sCO2 intermediary compact heat exchangers for sodium-cooled fast reactors (SFR). A simplified 1-D analytical model was developed in companion with a 3-D CFD model. Using classic heat transfer correlations for Nusselt number, some simulation results using the 1-D model have achieved reasonable match with the CFD simulation results for longer channels (i.e., 40 cm and 80 cm). However, for short channel (10 cm) when axial conduction within the sodium fluid is significant, the 1-D model significantly over-predicted the heat transfer effectiveness. By incorporating the temperature-jump model, the 1-D model can extend its …

Minimum Induced Drag For Tapered Wings Including Structural Constraints, Jeffrey D. Taylor, Douglas F. Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

LIFTING-LINE theory [1,2] is the foundation for much of our understanding of finite-wing aerodynamics. Solutions based on lifting-line theory are widely accepted and have been shown to be in good agreement with CFD [3-10]. From Prandtl’s analytic solution to the classical lifting-line equation [1,2], the wing section-lift distribution can be expressed as a Fourier series of the form [11]

bL^~ (θ)/L = (4/π)[sin(θ) + Σ^∞_n-2 B_nsin(nθ)]; θ = cos^-1(-2z/b) (1)

where b is the wingspan, L^~ is the local wing section lift, L is the total wing lift, z is the spanwise …

Minimising Induced Drag With Weight Distribution, Lift Distribution, Wingspan, And Wing-Structure Weight, Warren F. Phillips, Douglas F. Hunsaker, Jeffrey D. Taylor

Mechanical and Aerospace Engineering Student Publications and Presentations

Because the wing-structure weight required to support the critical wing section bending moments is a function of wingspan, net weight, weight distribution, and lift distribution, there exists an optimum wingspan and wing-structure weight for any fixed net weight, weight distribution, and lift distribution, which minimises the induced drag in steady level flight. Analytic solutions for the optimum wingspan and wing-structure weight are presented for rectangular wings with four different sets of design constraints. These design constraints are fixed lift distribution and net weight combined with 1) fixed maximum stress and wing loading, 2) fixed maximum deflection and wing loading, 3) …

Improving Thermal Conduction Across Cathode/Electrolyte Interfaces In Solid-State Lithium-Ion Batteries By Hierarchical Hydrogen-Bond Network, Jinlong He, Lin Zhang, Ling Liu

Mechanical and Aerospace Engineering Student Publications and Presentations

Effective thermal management is an important issue to ensure safety and performance of lithium-ion batteries. Fast heat removal is highly desired but has been obstructed by the high thermal resistance across cathode/electrolyte interface. In this study, self-assembled monolayers (SAMs) are used as the vibrational mediator to tune interfacial thermal conductance between an electrode, lithium cobalt oxide (LCO), and a solid state electrolyte, polyethylene oxide (PEO). Embedded at the LCO/PEO interface, SAMs are specially designed to form hierarchical hydrogen-bond (H-bond) network with PEO. Molecular dynamics simulations demonstrate that all SAM-decorated interfaces show enhanced thermal conductance and dominated by H-bonds types. The …

Numerical Method For Rapid Aerostructural Design And Optimization, Jeffrey D. Taylor, Douglas F. Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

During early phases of wing design, analytic and low-fidelity methods are often used to identify promising design concepts. In many cases, solutions obtained using these methods provide intuition about the design space that is not easily obtained using higher-fidelity methods. This is especially true for aerostructural design. However, many analytic and low-fidelity aerostructural solutions are limited in application to wings with specific planforms and weight distributions. Here, a numerical method for minimizing induced drag with structural constraints is presented that uses approximations that apply to wings with arbitrary planforms and weight distributions. The method is applied to the NASA Ikhana …

Change Of Exposure Time Mid-Test In High Temperature Dic Measurement, Thinh Quang Thai, Adam J. Smith, Robert J. Rowley, Paul R. Gradl, Ryan B. Berke

Mechanical and Aerospace Engineering Faculty Publications

Performing digital image correlation (DIC) at extreme temperatures has been greatly challenging due to the radiation which saturates the camera sensor. At such high temperatures, the light intensity emitted from an object is occasionally so powerful that the acquired images are overwhelmingly saturated. This induces data loss, potentially ruining the test, thus requiring the user to restart the test. For this reason, selection of an appropriate camera sensitivity plays a crucial role prior to beginning the test. Exposure time is a factor contributing to camera sensitivity and it is the easiest setting to manipulate during the test since it introduces …

Nytrox As “Drop-In” Replacement For Gaseous Oxygen In Smallsat Hybrid Propulsion Systems, Stephen A. Whitmore

Mechanical and Aerospace Engineering Faculty Publications

A medical grade nitrous oxide (N₂O) and gaseous oxygen (GOX) “Nytrox” blend is investigated as a volumetrically-efficient replacement for GOX in SmallSat-scale hybrid propulsion systems. Combined with 3-D printed acrylonitrile butadiene styrene (ABS), the propellants represent a significantly safer, but superior performing, alternative to environmentally-unsustainable spacecraft propellants like hydrazine. In a manner analogous to the creation of soda-water using dissolved carbon dioxide, Nytrox is created by bubbling GOX under pressure into N₂O until the solution reaches saturation. Oxygen in the ullage dilutes N₂O vapor and increases the required decomposition energy barrier by several orders …

Proper Orthogonal Decomposition And Recurrence Map For The Identification Of Spatial–Temporal Patterns In A Low-Re Wake Downstream Of Two Cylinders, Meihua Zhang, Zhongquan Charlie Zheng, Huixuan Wu

Mechanical and Aerospace Engineering Faculty Publications

Flow decomposition methods provide systematic ways to extract the flow modes, which can be regarded as the spatial distribution of a coherent structure. They have been successfully used in the study of wake, boundary layer, and mixing. However, real flow structures also possess complex temporal patterns that can hardly be captured using the spatial modes obtained in the decomposition. In order to analyze the temporal variation of coherent structures in a complex flow field, this paper studies the recurrence in phase space to identify the pattern and classify the evolution of the flow modes. The recurrence pattern depends on the …

Identifying Optimal Equivalent Area Changes To Reduce Sonic Boom Loudness, Troy Abraham, Douglas F. Hunsaker, Jonathan M. Weaver-Rosen, Richard J. Malak Jr.

Mechanical and Aerospace Engineering Student Publications and Presentations

This work explores the design space created from modeling the effect of localized geometric changes on a supersonic aircraft’s near-field pressure signature. These geometric changes are used to alter the aircraft’s near-field pressure signature in a way that reduces its sonic boom loudness at the ground. The aircraft used in this work is the NASA 25D concept and its near-field pressure signature is modeled using two separate methods. The first method uses the PANAIR panel code to obtain a near-field pressure signature for an axisymmetric representation of the 25D. This near-field signature is propagated to the ground using the NASA …

Near-Field Pressure Signature Splicing For Low-Fidelity Design Space Exploration Of Supersonic Aircraft, Christian R. Bolander, Douglas F. Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

As interest in supersonic overland flight intensifies, new ways to meet government restrictions on sonic boom loudness must be implemented. Low-fidelity aerodynamic tools, such as PANAIR, can estimate the near-field pressure signature that ultimately determines the loudness of the sonic boom at the ground. These tools can greatly benefit the exploration of large design spaces due to their computational efficiency. One of the limitations of low-fidelity tools is the accuracy of the solution produced, which is dependent on the fundamental physical assumptions made in the development of the governing equations. If flow patterns are produced that severely violate these fundamental …

Minimum Induced Drag For Tapered Wings Including Structural Constraints, Jeffrey D. Taylor, Doug F. Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

For a wing in steady level flight, the lift distribution that minimizes induced drag depends on a tradeoff between wingspan and wing-structure weight. In 1933, Prandtl suggested that tapered wings have an advantage over rectangular wings due to this tradeoff. However, Prandtl’s solutions were obtained using assumptions that correspond to rectangular wings. Therefore, his claim was not analytically proven by his 1933 publication. Here, an approach similar to Prandtl’s is taken with more general approximations that apply to wings of arbitrary planform. This more general development is used to study Prandtl’s claim about tapered wings. Closed-form solutions for the optimum …