Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Selected Works

Dr. Ajay Mahajan

Composite materials

Articles 1 - 2 of 2

Full-Text Articles in Mechanical Engineering

Short Crack Growth Model In A Particulate Composite Using Nonlinear Elastic Fracture Mechanics, Ying Zhang, Tsuchin Chu, Ajay Mahajan Apr 2015

Short Crack Growth Model In A Particulate Composite Using Nonlinear Elastic Fracture Mechanics, Ying Zhang, Tsuchin Chu, Ajay Mahajan

Dr. Ajay Mahajan

The fracture mechanics model for a long crack does not work very well with short-crack propagation when the initial crack length is less than 5.1 mm (0.2 inch). In order to investigate the short crack effect, a series of tests of particulate composite specimens with long and short cracks were performed and the results recorded on a video tape. This test data was analyzed to determine the fracture parameters. Two initial crack lengths, 2.5 mm (0.1 inches) and 7.6 mm (0.3 inches) were used in the crack propagation tests. Based on the principle of linear elastic fracture mechanics (LEFM), the …


Determination Of Optimal Experimental Parameters For Transient Thermography Imaging Using Finite-Element Models, Tsuchin Chu, Ajay Mahajan, A. Digrgorio, S. Russell Apr 2015

Determination Of Optimal Experimental Parameters For Transient Thermography Imaging Using Finite-Element Models, Tsuchin Chu, Ajay Mahajan, A. Digrgorio, S. Russell

Dr. Ajay Mahajan

A study was conducted to determine the optimal inspection parameters such as range and time for finding defects in carbon/epoxy composite panels using IR thermography imaging. The present paper presents an innovative method for automatically selecting these parameters for evaluating composites based on a series of finite-element models. Such finite-element models of composite panels with flaws at different depth locations were constructed a priori and analysed to estimate the optimal operating parameters. The optimal inspection range and time were identified in the contour plots obtained from the appropriate finite-element analysis results. A graphite–epoxy composite panel with phantom defects at various …