Mechanical Engineering Commons^™

Dynamical Thermal Conductivity Of Suspended Graphene Ribbons In The Hydrodynamic Regime, Zlatan Aksamija, Arnab K. Majee

Zlatan Aksamija

Umass Amherst Building Measurement, Verification, Coordination And Template Plan, Nariman Mostafavi, Ted Mendoza, Jeffrey G. Quackenbush, Sandy J. Beauregard, Jason J. Burbank, Mohamad Farzinmoghadam, Ludmilla Pavlova-Gillham, Kylie A. Landrey, Patricia O'Flaherty

Ludmilla D Pavlova

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Building Measurement, Verification, Coordination and Template Plan was begun in 2013 and finalized in 2015 as a resource to project teams that undertake the measurement and verification of building systems during the first year of occupancy of a new building and renovation project, particularly projects undergoing LEED certification.

Ultra-Thin-Film Aln Contour-Mode Resonators For Sensing Applications, Matteo Rinaldi, Chiara Zuniga, Gianluca Piazza

Matteo Rinaldi

This paper reports on the design and experimental verification of a new class of ultra-thin-film (250 nm) aluminum nitride (AlN) microelectromechanical system (MEMS) contour mode resonators (CMRs) suitable for the fabrication of ultra-sensitive gravimetric sensors. The device thickness was opportunely scaled in order to increase the mass sensitivity, while keeping a constant frequency of operation. In this first demonstration the resonance frequency of the device was set to 178 MHz and a mass sensitivity as high as 38.96 KHz⋅μm2/fg was attained. This device demonstrates the unique capability of the CMR-S technology to decouple resonance frequency from mass sensitivity.

5-10 Ghz Aln Contour-Mode Nanoelectromechanical Resonators, Matteo Rinaldi, Chiara Zuniga, Gianluca Piazza

Matteo Rinaldi

This paper reports on the design and experimental verification of Super High Frequency (SHF) laterally vibrating NanoElctroMechanical (NEMS) resonators. For the first time, AlN piezoelectric nanoresonators with multiple frequencies of operation ranging between 5 and 10 GHz have been fabricated on the same chip and attained the highest f-Q product (4.6E12 Hz) ever reported in AlN contour-mode devices. These piezoelectric NEMS resonators are the first of their class to demonstrate on-chip sensing and actuation of nanostructures without the need of cumbersome or power consuming excitation and readout systems. Effective piezoelectric activity has been demonstrated in thin AlN films having vertical …

Ultra-Thin Super High Frequency Two-Port Aln Contour-Mode Resonators And Filters, Matteo Rinaldi, Chiara Zuniga, Chengjie Zuo, Gianluca Piazza

Matteo Rinaldi

This paper reports on the demonstration of a new class of ultra-thin (250 nm thick) Super High Frequency (SHF) AlN piezoelectric two-port resonators and filters. A thickness field excitation scheme was employed to excite a higher order contour extensional mode of vibration in an AlN nano plate (250 nm thick) above 3 GHz and synthesize a 1.96 GHz narrow-bandwidth channel-select filter. The devices of this work are able to operate over a frequency range from 1.9 to 3.5 GHz and are employed to synthesize the highest frequency MEMS filter based on electrically self-coupled AlN contour-mode resonators. Very narrow bandwidth (~ …

Nanoenabled Microelectromechanical Sensor For Volatile Organic Chemical Detection, Chiara Zuniga, Matteo Rinaldi, Samuel M. Khamis, A. T. Johnson, Gianluca Piazza

Matteo Rinaldi

A nanoenabled gravimetric chemical sensor prototype based on the large scale integration of single-stranded DNA (ss-DNA) decorated single-walled carbon nanotubes (SWNTs) as nanofunctionalization layer for aluminum nitride contour-mode resonant microelectromechanical (MEM) gravimetric sensors has been demonstrated. The capability of two distinct single strands of DNA bound to SWNTs to enhance differently the adsorption of volatile organic compounds such as dinitroluene (simulant for explosive vapor) and dymethyl-methylphosphonate (simulant for nerve agent sarin) has been verified experimentally. Different levels of sensitivity (17.3 and 28 KHz µm^2/fg) due to separate frequencies of operation (287 and 450 MHz) on the same die have also …

Super-High-Frequency Two-Port Aln Contour-Mode Resonators For Rf Applications, Matteo Rinaldi, Chiara Zuniga, Chengjie Zuo, Gianluca Piazza

Matteo Rinaldi

This paper reports on the design and experimental verification of a new class of thin-film (250 nm) superhigh- frequency laterally-vibrating piezoelectric microelectromechanical (MEMS) resonators suitable for the fabrication of narrow-band MEMS filters operating at frequencies above 3 GHz. The device dimensions have been opportunely scaled both in the lateral and vertical dimensions to excite a contourextensional mode of vibration in nanofeatures of an ultra-thin (250 nm) AlN film. In this first demonstration, 2-port resonators vibrating up to 4.5 GHz have been fabricated on the same die and attained electromechanical coupling, kt^2, in excess of 1.5%. These devices are employed to …

Voltage Impulse Induced Bistable Magnetization Switching In Multiferroic Heterostructures, Tianxiang Nan

Tianxiang Nan

We report on voltage impulse induced reversible bistable magnetization switching in FeGaB/lead zirconate titanate (PZT) multiferroic heterostructures at room temperature. This was realized through strain-mediated magnetoelectric coupling between ferroelectric PZT and ferromagnetic FeGaB layer. Two reversible and stable voltage-impulse induced mechanical strain states were obtained in the PZT by applying an electric field impulse with its amplitude smaller than the electric coercive field, which led to reversible voltage impulse induced bistable magnetization switching. These voltage impulse induced bistable magnetization switching in multiferroic heterostructures provides a promising approach to power efficient bistable magnetization switching that is crucial for information storage.

Ultra-Thin-Film Aln Contour-Mode Resonators For Sensing Applications, Matteo Rinaldi, Chiara Zuniga, Gianluca Piazza

Matteo Rinaldi

This paper reports on the design and experimental verification of a new class of ultra-thin-film (250 nm) aluminum nitride (AlN) microelectromechanical system (MEMS) contour mode resonators (CMRs) suitable for the fabrication of ultra-sensitive gravimetric sensors. The device thickness was opportunely scaled in order to increase the mass sensitivity, while keeping a constant frequency of operation. In this first demonstration the resonance frequency of the device was set to 178 MHz and a mass sensitivity as high as 38.96 KHz⋅μm2/fg was attained. This device demonstrates the unique capability of the CMR-S technology to decouple resonance frequency from mass sensitivity.

100nm Thick Aluminum Nitride Based Piezoelectric Nano Switches Exhibiting 1mv Threshold Voltage Via Body-Biasing, Nipun Sinha, Zhijun Guo, Valeriy Felmetsger, Gianluca Piazza

Nipun Sinha

This paper reports on the first demonstration of aluminum nitride (AlN) piezoelectric logic switches that were fabricated with ultra-thin (100nm) AlN films and exhibit a 1 mV threshold voltage via the body-biasing scheme. The application of a relatively low (< 6 V) fixed potential to the body terminal of a 4-terminal switch has resulted in a repeatable threshold voltage of 1 mV. The nano-switch has been cycled to > 109 cycles and, although the contact resistance was found to be high (~ 1 MΩ), the nano-films have functioned throughout to show high piezoelectric nano-film reliability.

Super-High-Frequency Two-Port Aln Contour-Mode Resonators For Rf Applications, Matteo Rinaldi, Chiara Zuniga, Chengjie Zuo, Gianluca Piazza

Matteo Rinaldi

This paper reports on the design and experimental verification of a new class of thin-film (250 nm) super-high-frequency laterally-vibrating piezoelectric microelectromechanical (MEMS) resonators suitable for the fabrication of narrow-band MEMS filters operating at frequencies above 3 GHz. The device dimensions have been opportunely scaled both in the lateral and vertical dimensions to excite a contour-extensional mode of vibration in nanofeatures of an ultra-thin (250 nm) AlN film. In this first demonstration, 2-port resonators vibrating up to 4.5 GHz have been fabricated on the same die and attained electromechanical coupling, kt2, in excess of 1.5%. These devices are employed to synthesize …

Demonstration Of Low Voltage And Functionally Complete Logic Operations Using Body-Biased Complementary And Ultra-Thin Aln Piezoelectric Mechanical Switches, Nipun Sinha, Timothy S. Jones, Zhijun Guo, Gianluca Piazza

Nipun Sinha

This paper reports, for the first time, on the demonstration of low voltage and functionally complete logic elements (NAND and NOR) implemented by using body-biased complementary and ultra-thin (250 nm thick) Aluminum Nitride (AlN) based piezoelectric mechanical switches. This work presents, firstly, the importance of scaling AlN films for the demonstration of ultra-thin AlN switches and, secondly, the implementation of a new actuation scheme based on body biasing to lower the switch threshold voltage. Four of these ultra-thin switches were connected together to synthesize functionally complete MEMS logic gates (NAND and NOR) with a ± 2V swing and a body-bias …

Piezoelectric Aluminum Nitride Nanoelectromechanical Actuators, Nipun Sinha, Graham Wabiszewski, Rashed Mahameed, Valery Felmetsger, Shawn Tanner, Robert Carpick, Gianluca Piazza

Nipun Sinha

This letter reports the implementation of ultrathin (100 nm) aluminum nitride (AlN) piezoelectric layers for the fabrication of vertically deflecting nanoactuators. The films exhibit an average piezoelectric coefficient (d31~−1.9 pC/N), which is comparable to its microscale counterpart. This allows vertical deflections as large as 40 nm from 18 µm long and 350 nm thick multilayer cantilever bimorph beams with 2 V actuation. Furthermore, in-plane stress and stress gradients have been simultaneously controlled. The films exhibit leakage currents lower than 2 nA/cm2 at 1 V, and have an average relative dielectric constant of approximately 9.2 (as in thicker films). These material …

Ultra-Thin Super High Frequency Two-Port Aln Contour-Mode Resonators And Filters, Matteo Rinaldi, Chiara Zuniga, Chengjie Zuo, Gianluca Piazza

Matteo Rinaldi

This paper reports on the demonstration of a new class of ultra-thin (250 nm thick) Super High Frequency (SHF) AlN piezoelectric two-port resonators and filters. A thickness field excitation scheme was employed to excite a higher order contour extensional mode of vibration in an AlN nano plate (250 nm thick) above 3 GHz and synthesize a 1.96 GHz narrow-bandwidth channel-select filter. The devices of this work are able to operate over a frequency range from 1.9 to 3.5 GHz and are employed to synthesize the highest frequency MEMS filter based on electrically self-coupled AlN contour-mode resonators. Very narrow bandwidth (~ …

Dna-Decorated Carbon Nanotubes As Sensitive Layer For Aln Contour-Mode Resonant-Mems Gravimetric Sensor, Chiara Zuniga, Matteo Rinaldi, Samuel M. Khamis, Timothy S. Jones, A T. Johnson, Gianluca Piazza

Matteo Rinaldi

In this work a nano-enabled gravimetric chemical sensor prototype based on single-stranded DNA (ss-DNA) decorated single-walled carbon nanotubes (SWNT) as nano-functionalization layer for Aluminun Nitride (AIN) contour-mode resonant-MEMS gravimetric sensors has been demonstrated. Two resonators fabricated on the same silicon chip and operating at different resonance frequencies, 287 and 450 MHz, were functionalized with this novel bio-coating layer to experimentally prove the capability of two distinct single strands of DNA bound to SWNT to enhance differently the adsorption of volatile organic compounds such as dinitroluene (DNT, simulant for explosive vapor) and dymethyl-methylphosphonate (DMMP, a simulant for nerve agent sarin). The …

Nanoenabled Microelectromechanical Sensor For Volatile Organic Chemical Detection, Chiara Zuniga, Matteo Rinaldi, Samuel M. Khamis, A. T. Johnson, Gianluca Piazza

Matteo Rinaldi

A nanoenabled gravimetric chemical sensor prototype based on the large scale integration of single-stranded DNA (ss-DNA) decorated single-walled carbon nanotubes (SWNTs) as nanofunctionalization layer for aluminum nitride contour-mode resonant microelectromechanical (MEM) gravimetric sensors has been demonstrated. The capability of two distinct single strands of DNA bound to SWNTs to enhance differently the adsorption of volatile organic compounds such as dinitroluene (simulant for explosive vapor) and dymethyl-methylphosphonate (simulant for nerve agent sarin) has been verified experimentally. Different levels of sensitivity (17.3 and 28 KHz µm^2/fg) due to separate frequencies of operation (287 and 450 MHz) on the same die have also …

5-10 Ghz Aln Contour-Mode Nanoelectromechanical Resonators, Matteo Rinaldi, Chiara Zuniga, Gianluca Piazza

Matteo Rinaldi

This paper reports on the design and experimental verification of Super High Frequency (SHF) laterally vibrating NanoElctroMechanical (NEMS) resonators. For the first time, AlN piezoelectric nanoresonators with multiple frequencies of operation ranging between 5 and 10 GHz have been fabricated on the same chip and attained the highest f-Q product (4.6E12 Hz) ever reported in AlN contour-mode devices. These piezoelectric NEMS resonators are the first of their class to demonstrate on-chip sensing and actuation of nanostructures without the need of cumbersome or power consuming excitation and readout systems. Effective piezoelectric activity has been demonstrated in thin AlN films having vertical …

Aln Contour-Mode Resonators For Narrow-Band Filters Above 3 Ghz, Matteo Rinaldi, Chiara Zuniga, Chengjie Zuo, Gianluca Piazza

Matteo Rinaldi

This paper reports on the design and experimental verification of a new class of thin-film (250 nm) Super High Frequency (SHF) laterally-vibrating piezoelectric microelectromechanical (MEMS) resonators suitable for the fabrication of narrow-band MEMS filters operating at frequencies above 3 GHz. The device dimensions have been opportunely scaled both in the lateral and vertical dimensions in order to excite a contour-extensional mode of vibration in nano features of an ultra-thin (250 nm) Aluminum Nitride (AlN) film. In this first demonstration two-port resonators vibrating up to 4.5 GHz were fabricated on the same die and attained electromechanical coupling, kt2, in excess of …

Integration Of Aln Micromechanical Contour-Mode Technology Filters With Three-Finger Dual Beam Aln Mems Switches, Nipun Sinha, Rashed Mahameed, Chengjie Zuo, Gianluca Piazza

Nipun Sinha

In this paper, we present the first demonstration of the monolithic integration of Aluminum Nitride (AlN) micromechanical contour mode technology filters with dual-beam actuated MEMS AlN switches. This integration has lead to the development of the first prototype of a fully-integrated all-mechanical switchable filter. Integration has been demonstrated by using AlN contour-mode MEMS filters at two center frequencies, i.e. 98.7 and 279.9 MHz. The micromechanical switch design used here is a novel three-finger dual-beam topology that improves the isolation and insertion loss of the switch by decreasing the parasitic coupling between the DC and RF signals over a previous AlN …

Body-Biased Complementary Logic Implemented Using Aln Piezoelectric Mems Switches, Nipun Sinha, Timothy S. Jones, Zhijun Guo, Gianluca Piazza

Nipun Sinha

This paper reports on the first implementation of low voltage complementary logic (< 1.5 V) by using body-biased aluminum nitride (AlN) piezoelectric MEMS switches. For the first time, by using opposite body biases the same mechanical switch has been made to operate as both an n-type and p-type (complementary) device. Body-biasing also gives the ability to precisely tune the threshold voltage of a switch. The AlN MEMS switches have shown extremely small subthreshold slopes and threshold voltages as low as 0.8 mV/dec and 30 mV, respectively. Furthermore, this work presents a fully mechanical body-biased inverter formed by two AlN MEMS switches operating at 100 Hz with a ± 1.5 V voltage swing.

Ultra Thin Aln Piezoelectric Nano-Actuators, Nipun Sinha, Graham E. Wabiszewski, Rashed Mahameed, Valery V. Felmetsger, Shawn M. Tanner, Robert W. Carpick, Gianluca Piazza

Nipun Sinha

This paper reports the first implementation of ultra thin (100 nm) Aluminum Nitride (AlN) piezoelectric layers for the fabrication of vertically deflecting nano-actuators. An average piezoelectric coefficient (d31~ 1.9 pC/N) that is comparable to its microscale counterpart has been demonstrated in nanoscale thin AlN films. Vertical deflections as large as 40 nm have been obtained in 18 μm long and 350 nm thick cantilever beams under bimorph actuation with 2 V. Furthermore, in-plane stress and stress gradients have been simultaneously controlled. Leakage current lower than 2 nA/cm2 at 1 V has been recorded and an average relative dielectric constant of …

Dual Beam Actuation Of Piezoelectric Aln Rf Mems Switches Integrated With Aln Contour-Mode Resonators, Nipun Sinha, Rashed Mahamameed, Chengjie Zuo, Marcelo B. Pisani, Carlos R. Perez, Gianluca Piazza

Nipun Sinha

This work reports on piezoelectric Aluminum Nitride (AlN) based dual-beam RF MEMS switches that have been monolithically integrated with AlN contour-mode resonators. The dual-beam switch design presented in this paper intrinsically compensates for the residual stress in the deposited films, requires low actuation voltage (5-20 V), facilitates active pull-off to open the switch and fast switching times (1 to 2 µsec). This work also presents the combined response (cascaded S-parameters) of a resonator and a switch that were co-fabricated on the same substrate. The response shows that the resonator can be effectively turned on and off by the switch. A …

Dual Beam Actuation Of Piezoelectric Aln Rf Mems Switches Integrated With Aln Contour-Mode Resonators, Nipun Sinha, Rashed Mahamameed, Chengjie Zuo, Marcelo B. Pisani, Carlos R. Perez, Gianluca Piazza

Marcelo B Pisani

This work reports on piezoelectric Aluminum Nitride (AlN) based dual-beam RF MEMS switches that have been monolithically integrated with AlN contour-mode resonators. The dual-beam switch design presented in this paper intrinsically compensates for the residual stress in the deposited films, requires low actuation voltage (5-20 V), facilitates active pull-off to open the switch and fast switching times (1 to 2 µsec). This work also presents the combined response (cascaded S-parameters) of a resonator and a switch that were co-fabricated on the same substrate. The response shows that the resonator can be effectively turned on and off by the switch. A …