Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Publication
- Publication Type
Articles 1 - 2 of 2
Full-Text Articles in Mechanical Engineering
Response Of Ti-6al-4v And Ti-24al-11nb Alloys To Dry Sliding Wear Against Hardened Steel
Response Of Ti-6al-4v And Ti-24al-11nb Alloys To Dry Sliding Wear Against Hardened Steel
A.S. Md Abdul Haseeb
Titanium alloys have been of great interest in recent years because of their very attractive combination of high strength, low density and corrosion resistance. Application of these alloys in areas where wear resistance is also of importance calls for thorough investigations of their tribological properties. In this work, Ti-6Al-4V and Ti-24Al-11Nb alloys were subjected to dry sliding wear against hardened-steel counter bodies and their tribological response was investigated. A pin-on-disc type apparatus was used with a normal load of 15-45N and sliding speed of 1.88 ms -1. In the steady state, it was demonstrated that Ti-24Al-11Nb had a substantially higher …
Tribological Behavior Of Nanostructured Nickel, Dean Joseph Guidry
Tribological Behavior Of Nanostructured Nickel, Dean Joseph Guidry
LSU Master's Theses
The present study reports the effects of electroplating parameters on the microstructure, and thus the mechanical and tribological properties, of nanostructured nickel. Electroplating was conducted in a Watt's type bath with a pH of 3.0 carried out using direct current in galvanostatic mode at current densities of 30 mA/cm2 and 15 mA/cm2 in electroplating bath temperatures of 30°C and 50°C. Grain size and distributions were determined from TEM (Transmission Electron Microscope) and SEM (Scanning Electron Microscope) micrographs. Tribological tests were carried out on a pin-on-disc type tribometer. The same tests were conducted on Ni-200 for the purpose of …