Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Acoustics (3)
- Dynamics (2)
- Energetic materials (2)
- Metamaterials (2)
- Noise (2)
-
- Transmission loss (2)
- Automotive (1)
- Axial Piston-Pump (1)
- Bi-stable (1)
- Comfort (1)
- Command shaping (1)
- Compression (1)
- Cylinder-to-Cylinder Variation (1)
- Data Analytics (1)
- Defects (1)
- Demonstration videos (1)
- Demonstrations (1)
- EVC (1)
- Education (1)
- Energetic (1)
- Energy (1)
- Explosives (1)
- Flexible-joint robot (1)
- Fluid Power (1)
- Granular Crystals (1)
- Harvesting (1)
- Honeycomb (1)
- Human pilot model (1)
- Inhomogeneous waves (1)
- Insulation (1)
Articles 1 - 19 of 19
Full-Text Articles in Mechanical Engineering
Generation Of Inhomogeneous Acoustic Waves Using An Array Of Loudspeakers, Samuel E. Wonfor, Trevor A. Kyle, J. Stuart Bolton, Jeffrey F. Rhoads
Generation Of Inhomogeneous Acoustic Waves Using An Array Of Loudspeakers, Samuel E. Wonfor, Trevor A. Kyle, J. Stuart Bolton, Jeffrey F. Rhoads
The Summer Undergraduate Research Fellowship (SURF) Symposium
In previous studies it has been shown that pressure fields created by inhomogeneous sound waves (waves which decay in a direction perpendicular to their propagation direction) are able to transmit energy into objects more effectively than ones created by conventional sound waves. This behavior may be useful in the detection of hidden explosive threats. To explore this, a device capable of constructing inhomogeneous waves is being developed. The proposed device is an acoustic array consisting of several high-frequency speakers. The speakers are independently driven to construct a desired inhomogeneous pressure field on a target surface. Inhomogeneous pressure fields were reconstructed …
Examination Of Ordering Effects In Sound Evaluations, Yiyun Zhang, Patricia Davies, Daniel Carr
Examination Of Ordering Effects In Sound Evaluations, Yiyun Zhang, Patricia Davies, Daniel Carr
The Summer Undergraduate Research Fellowship (SURF) Symposium
It is difficult to predict sound annoyance responses because annoyance is an inherently subjective concept and the evaluation standard could be different from each person. Usually, annoyance models are functions of strengths of sound characteristics only, and these models can help engineers to improve sounds that machines make and minimize annoyance levels, but other factors can also influence annoyance ratings of products. The main goal of this research was to investigate ordering effects in sound evaluations when people are hearing a set of sounds in sequence. Of particular interest is how the response to a sound influences the response to …
Stability Analysis Of A Flexible Vehicle Model Controlled By Human Pilot Models, Abhishek Ajmani, Anil Bajaj
Stability Analysis Of A Flexible Vehicle Model Controlled By Human Pilot Models, Abhishek Ajmani, Anil Bajaj
The Summer Undergraduate Research Fellowship (SURF) Symposium
There is a constant race among automobile manufactures to design safer vehicles while minimizing weight to reduce power consumption. Additionally, organizations like NASA and SpaceX are persistently working toward creating reliable, lightweight rovers to be used on the surface of Mars. However, the lightweight requirement often increases vehicle flexibility, which further develops a tendency toward instability in the lateral (sideways) direction. This investigation develops a mathematical model that represents the dynamics of a flexible vehicle in forward motion, and a heuristic human pilot model is proposed which controls the vehicle. Following such formulation, the combined vehicle and pilot model is …
The Influence Of Macroscale Stress Concentrations On The Near-Resonant Thermomechanics Of Mock Energetic Materials, Lauren A. Cooper, Allison R. Range, Jeffrey F. Rhoads
The Influence Of Macroscale Stress Concentrations On The Near-Resonant Thermomechanics Of Mock Energetic Materials, Lauren A. Cooper, Allison R. Range, Jeffrey F. Rhoads
The Summer Undergraduate Research Fellowship (SURF) Symposium
The characterization of particulate composite energetic materials, both with and without stress concentration, is currently of great interest to the defense community. This work seeks to further characterize the self-heating effect of composite energetic plates, particularly around regions of high stress, when subjected to harmonic excitation near resonance. Mock energetic plates with macroscale stress concentrations are prepared in various compositions based on the PBXN-109 formulation, and are tested near the first resonant frequency using an electrodynamic shaker. The resulting mechanical and thermal responses are recorded using a laser Doppler vibrometer and an infrared camera, respectively. Upon comparison between the regions …
Dynamic Characterization Of Periodic Lattice Of Elastically-Connected Bi-Stable Elements Under Seismic Excitation, Lingwei Meng, Myungwon Hwang, Andres F. Arrieta Ph.D.
Dynamic Characterization Of Periodic Lattice Of Elastically-Connected Bi-Stable Elements Under Seismic Excitation, Lingwei Meng, Myungwon Hwang, Andres F. Arrieta Ph.D.
The Summer Undergraduate Research Fellowship (SURF) Symposium
Metamaterials are engineered materials, typically in periodic arrangements, which exhibit unconventional or extreme properties not found in nature. Understanding the dynamics of metamaterials enables the design of structures with specific functionalities. The dynamics of metamaterials in linear regime has been relatively well studied in recent years, however the unique phenomena arising from nonlinearities in metamaterials are yet to be explored. In this paper, we focus on an array of bi-stable elements connected by elastic springs under various forms of external excitations acting on the entire system. The general equations of motion are derived to handle any degree-of-freedom (DoF) systems of …
Development Of Data Analytics Tools For Acoustic Measurement Of Positive Displacement Machines, Dan Ding, Monika Ivantysynova, Paul Kalbfleisch
Development Of Data Analytics Tools For Acoustic Measurement Of Positive Displacement Machines, Dan Ding, Monika Ivantysynova, Paul Kalbfleisch
The Summer Undergraduate Research Fellowship (SURF) Symposium
Noise control is an important factor in evaluating the design of positive displacement machines. This research project aims to develop new tools in MATLAB, with emphasis on visual approaches, to comprehensively characterize the noise generated by positive displacement machines in spatial, temporal and frequency domains. Sound pressure level (SPL), sound intensity level (SIL) and loudness were calculated and plotted on a measurement surface surrounding the pump, which illustrates the spatial distribution of the sound field. In order to highlight the phenomenon within specific frequency bands, Butterworth filters were used to isolate desired frequencies, such that specific harmonic content or 1/3 …
The Influence Of Thermal Conditions On The Thermomechanics Of Particulate-Composite, Mock Explosive Samples Under Near-Resonant Excitation, Jaylon B. Tucker, Allison R. Range, Jeffrey F. Rhoads
The Influence Of Thermal Conditions On The Thermomechanics Of Particulate-Composite, Mock Explosive Samples Under Near-Resonant Excitation, Jaylon B. Tucker, Allison R. Range, Jeffrey F. Rhoads
The Summer Undergraduate Research Fellowship (SURF) Symposium
Vapor detection is one of the most effective ways to find hidden plastic-bonded explosives in the field today. In recent years, it has been demonstrated that providing near-resonant vibratory excitation to explosives dramatically increases their vapor pressure, allowing for easier detection. Unfortunately, there currently exists a limited understanding of the thermomechanics of energetic material. This study seeks to help fill this technical void by exploring the thermomechanics of mock plastic-bonded explosives using direct mechanical excitation with varying thermal conditions. Using two different ambient thermal boundary conditions (insulated geometric boundaries and boundaries with free convection), a 7" by 10" by 0.5" …
Dynamic Behavior Of A Clamped-Clamped Bi-Stable Laminate For Energy Harvesting, Ajay V. Kumar, Andres F. Arrieta Ph.D., Myungwon Hwang
Dynamic Behavior Of A Clamped-Clamped Bi-Stable Laminate For Energy Harvesting, Ajay V. Kumar, Andres F. Arrieta Ph.D., Myungwon Hwang
The Summer Undergraduate Research Fellowship (SURF) Symposium
Multi-stable laminates have many applications in morphing structures, energy harvesting devices, and metamaterials due to the specific characteristics attributed to the exhibited stable states. Changes between stable states allow for large deflections, on-demand variation of the stiffness of compliant structures embedded within these elements, and control of effective dynamic properties in periodic lattices. These changes in state can be accessed via a snap-through instability triggered by introducing a well-defined activation energy. The resulting oscillations could enable broadband energy harvesting via piezoelectric transduction and resistive circuits. In this paper, a clamped-clamped bi-stable laminate is studied to understand the behavior of the …
The Effect Of Honeycomb Cavity: Acoustic Performance Of A Double-Leaf Micro Perforated Panel, Yuxian Huang, Kai Ming Li
The Effect Of Honeycomb Cavity: Acoustic Performance Of A Double-Leaf Micro Perforated Panel, Yuxian Huang, Kai Ming Li
The Summer Undergraduate Research Fellowship (SURF) Symposium
A micro perforated panel (MPP) is a device consisting of a thin plate and submillimeter perforations for reducing low frequency noise. MPPs have many advantages compared to traditional sound absorption materials, such as durability and designability, and they can be used in a variety of places such as room interior designs, passenger and crew compartments of aircrafts and combustion engines. The models in this study were designed and fabricated with the latest 3-D printing technology. The transmission loss and sound absorption coefficient of the 3-D printed double-leaf MPPs with honeycomb cavities were studied. According to the established theory, MPPs work …
Application Of Ultrasound In The Measurement Of Lubricant Fluid Film Thickness In The Piston-Cylinder Interface Of An Axial Piston Pump, Dhruv Subramaniam, Dan Mizell, Monika Ivantysynova
Application Of Ultrasound In The Measurement Of Lubricant Fluid Film Thickness In The Piston-Cylinder Interface Of An Axial Piston Pump, Dhruv Subramaniam, Dan Mizell, Monika Ivantysynova
The Summer Undergraduate Research Fellowship (SURF) Symposium
In this paper a feasibility study has been conducted to determine a technique for the measurement of lubricant fluid film thickness in the piston-cylinder interface of an axial piston pump. The thickness of the lubricant film has a significant impact on the efficiency of the piston pump yet it still remains an uncertainty. If the lubricant film is too thin then friction will cause excessive damage resulting in deformation of interacting surfaces resulting in further uncertainty in thickness measurement. If the lubricant film is too thick then there is excessive leakage which will compromise the efficiency of the system. Acoustic, …
Efficient Exploration Of Quantified Uncertainty In Granular Crystals, Juan C. Lopez Ramirez, Marcial Gonzalez, Ilias Bilionis, Rohit K. Tripathy
Efficient Exploration Of Quantified Uncertainty In Granular Crystals, Juan C. Lopez Ramirez, Marcial Gonzalez, Ilias Bilionis, Rohit K. Tripathy
The Summer Undergraduate Research Fellowship (SURF) Symposium
Granular crystals present unique nonlinear properties that support standing waves. These depend on precompression and impurities. Thus, they can be used for different applications such as impact and shock dissipation. There are different models which rely on reasonable approximations and assumptions. While experimental results show good agreement with theory, there are experimental errors that are not easily explained and are usually attributed to the approximations made and phenomena that are not accounted for. This might be the result of not quantifying the uncertainty, since variables like the grain size, position, mass and Young modulus, of each particle, are uncertain. Building …
Influences Of Wind On Automotive Interior Sound Quality, Sara Huelsman, Patricia Davies, Daniel Carr
Influences Of Wind On Automotive Interior Sound Quality, Sara Huelsman, Patricia Davies, Daniel Carr
The Summer Undergraduate Research Fellowship (SURF) Symposium
The effects of noise on human health (both mental and physical) are well known, and motivation to decrease noise in daily life is prevalent. Wind noise within automotive interior cabins could be detrimental to human health and comfort because of the negative impact on speech intelligibility and fatigue overall. There is little information on human perception of wind noise in automobile interiors though Loudness and Articulation Index have been examined as predictors of human response. They have been found to predict well in some circumstances, but not in others. In this research, a variety of sound quality metrics are being …
Motion Control Of Robotic Arm With Command Shaping Method, Yumeng Wu, Peter H. Meckl, Alok Agrawal
Motion Control Of Robotic Arm With Command Shaping Method, Yumeng Wu, Peter H. Meckl, Alok Agrawal
The Summer Undergraduate Research Fellowship (SURF) Symposium
In the manufacturing industry, lots of rapid point-to-point motion is required while the residual vibration is unfavorable. Residual vibrations caused by flexible elements are limiting the performance of mechanical system, especially when the system needs to make rapid point-to-point motion. As proved in earlier studies, avoiding natural frequencies of the mechanical system reduces the residual vibrations. This work is based on a non-linear, two-link flexible jointed robot with configuration dependent resonance. Command shaping method consisting different combinations of base functions and weighting factors are compared in this work. The compatibility of command shaping with classical feedback control structure allows a …
Visualizing Mechanics: Improving Student Learning Through Video Demonstrations, Blake A. Wetherton, Olumide A. Awofeso, Carolyn E. Creighton, Adam F. Potrzebowski, Charles M. Krousgrill, Jeffrey F. Rhoads
Visualizing Mechanics: Improving Student Learning Through Video Demonstrations, Blake A. Wetherton, Olumide A. Awofeso, Carolyn E. Creighton, Adam F. Potrzebowski, Charles M. Krousgrill, Jeffrey F. Rhoads
The Summer Undergraduate Research Fellowship (SURF) Symposium
The Purdue Mechanics Freeform Classroom (PMFC) is a project that seeks to reform engineering mechanics education by integrating content and technology; enhancing communication between students, their peers, and instructors; accommodating a broader range of learning styles; and facilitating greater depths of understanding. In an attempt to increase the PMFC’s efficacy, a series of demonstration videos has been produced. As demonstrated by the popularity and pervasiveness of websites such as YouTube, short videos have the potential to captivate audiences. As such, these videos have incredible promise in educational contexts. In the PMFC series of videos, entitled Visualizing Mechanics, each imitates the …
Effect Of Compression On The Transmission Loss Of Porous Material, Yingchao Yang, J Stuart Bolton
Effect Of Compression On The Transmission Loss Of Porous Material, Yingchao Yang, J Stuart Bolton
The Summer Undergraduate Research Fellowship (SURF) Symposium
Porous materials are commonly applied in sound absorption in different places. Transmission loss, one of the vital parameters determining the performance of the material, will change when the material is compressed. Usually the compression that might affect the properties to the greatest extent are normal compression and the deformation can be simplified as 1D compression model. In order to verify the prediction, some formulas taking several parameters (porosity, tortuosity, flow resistivity and characteristic lengths) into account are applied and also the Johnson et al’s model of limp structure. Dynamic density of limp model and bulk modulus are thus obtained and …
Semi-Active Structural Control Of A 2-Story Shear Building, Alana K. Wilbee, Shirley Dyke
Semi-Active Structural Control Of A 2-Story Shear Building, Alana K. Wilbee, Shirley Dyke
The Summer Undergraduate Research Fellowship (SURF) Symposium
With continuing urban development across the world, it is becoming ever more important to provide increased structural safety against events such as earthquakes and strong winds. The field of structural control has recently been growing to meet these challenges through the use of semi-active control methods, such as the Magnetorheological (MR) Damper. However, due to the non-linearity of the device, the knowledge base surrounding the MR Damper and its various control algorithms still needs to be strengthened before large-scale implementation of this control method can occur. To address these issues, this study will examine a two story benchmark structure using …
Improvement On Cylinder-To-Cylinder Variation In Pcci Engines Using Variable Start Of Injection And Exhaust Valve Closing Timings, Aðalsteinn Axelsson, Greg Shaver
Improvement On Cylinder-To-Cylinder Variation In Pcci Engines Using Variable Start Of Injection And Exhaust Valve Closing Timings, Aðalsteinn Axelsson, Greg Shaver
The Summer Undergraduate Research Fellowship (SURF) Symposium
Premixed charge compression ignition (PCCI) is widely considered to be a possible method of meeting increasingly strict emissions regulations in internal combustion engines. PCCI can reduce harmful emissions substantially and at the same time increase efficiency relative to conventional combustion modes. Because of the nature of PCCI, changes in in-cylinder conditions have a greater impact than in conventional diesel engines. Therefore cylinder to cylinder variations are amplified which leads to problems such as misfire and decreased efficiency in cylinders with increased ignition delay and lower apparent heat release rate (AHRR) amplitudes. Two possible methods to counteract this effect in diesel …
The Stability And Control Of The Single Track Vehicles, Shyngys Karimov, Martin Corless
The Stability And Control Of The Single Track Vehicles, Shyngys Karimov, Martin Corless
The Summer Undergraduate Research Fellowship (SURF) Symposium
Bicycles, motorcycles and scooters are all examples of the single track vehicles. The dynamics of the single track vehicle involve many degrees of freedom and various modes which govern its performance, making a complicated and interesting research topic. Motorcycle in motion can roll, yaw, and steer about the steering axis. It has three main modes which determine the motion and stability of it, they are weave, capsize, and wobble. The motorcycle performance is limited by the behavior of its modes, and if even one of the modes becomes unstable, the vehicle will roll over, and crash. The goal of this …
Code Optimization For Phase Field Method, Sergio Andres Monsalve, Marisol Koslowski
Code Optimization For Phase Field Method, Sergio Andres Monsalve, Marisol Koslowski
The Summer Undergraduate Research Fellowship (SURF) Symposium
The Phase field model method for studying grain dislocation at atomic level after applying an external force to the materials being tested, enables simulate the behavior of different materials after applying stress. With the appropriate numerical method the simulation could change drastically the complexity of the algorithm. Finding the most accurate and stable numerical method for the phase field model give us a considerable improving in the performance of the code used to simulate the phase field dynamic dislocation in larger and more complex simulations can be performed. We made an statistic comparison between the different methods, comparing stability and …