Mechanical Engineering Commons^™

Sustainability Matchmaking: Exploration Into Using Excess Renewable Energy To Deliver ‘Free’ Energy To Fuel Poor Homes – A Preliminary Case Study In Ireland, Ciara Ahern, Ronan Oliver

Articles

The aggregated fuel cost of domestic hot water (DHW) generation in Ireland, in 2022, was €529M with associated emissions/load of 1.3MtCO₂/289GWh. The shadow price of carbon monetises the negative impact of emissions, rising with time; DHW generation has an associated shadow carbon cost of €13M in 2022, rising to €42M in 2030 and €335M in 2050.

In 2020, c12%/€441M of wind was curtailed or wasted as inter alia, there was no demand at times of high wind. Meanwhile, a ‘silent crisis’ is occurring in Ireland wherein one-in-two dwellings were considered in fuel poverty in 2022. Households in …

Addressing Low Heat Pump Heating System Sales In The Uk, Ben Costelloe

Articles

The replacement of existing fossil fuel boilers with heat pumps is seen as a key measure in the decarbonisation of heating systems and addressing climate change. This policy however, is currently failing in many Western European states, particularly in the UK. The many reasons for this situation are examined. However, the age of UK housing stock and particularly the high number of dwellings built prior to the introduction of building insulation regulations in 1980, are key. To maintain the running cost of air source heat pumps competitive with those of the gas boilers they generally replace the heat pump lift …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Housing In Kibera's Soweto East Informal Settlement, Kenya: A Socio-Technical Evaluation, Tiernan Brennan

Masters

In 2003, the Kenya Slum Upgrading Programme (KENSUP) was launched in partnership with UN-Habitat and the Government of Kenya (GoK) to improve the livelihoods of people in Kenya by 2020 through the provision of improved shelter, infrastructure, land tenure and income generation. Kibera is an informal settlement in Kenya where varying housing typologies and traditional vernacular-style designs coexist with modern housing units. Soweto East was one of eighteen villages located in Kibera selected for KENSUP’s first major housing development initiative. Soweto East was selected from a screening of several housing projects that could be subjected to a socio-technical (STE). The …

3d Simulation Of A Yogurt Filling Machine Using Grafcet Studio And Factory Io: Realization Of Industry 4.0, Bashir Salah, Waqas Saleem, Razaullah Khan, Ahmed Tawhid Ahmed Soliman

Articles

Manufacturing systems, enterprises and academic institutions worldwide are implementing industry 4.0 (IR4.0). By integrating the services and equipment, IR4.0 develops autonomous systems that manage industrial operations and exchange real-time data in real time. This study includes a simulation of an existing production system using the GRAFCET Studio software.

Cfd Simulation Of Anaerobic Granular Sludge Reactors: A Review, Camila D' Bastiani, David Kennedy, Anthony Reynolds

Articles

Anaerobic digestion processes can generate renewable energy in the form of biogas while treating organic wastewater. The generation of biogas within anaerobic digestion systems is directly linked to the mixing conditions inside the reactors. In high-rate reactors such as the up-flow anaerobic sludge blanket (UASB) reactor, the expanded granular sludge bed (EGSB) reactor and the internal circulation (IC) reactor, the hydrodynamic behaviour will depend on the interactions between the wastewater, the biogas, and the biomass granules. Over the past few years, various researchers have used computational fluid dynamics (CFD) to study the hydrodynamic behaviour in these types of reactors. This …

Advances In Precision Microfabrication Through Digital Light Processing: System Development, Material And Applications, Xinhui Wang, Jinghang Liu, Yang Zhang, Per Magnus Kristiansen, Aminul Islam, Michael Gilchrist, Nan Zhang

Articles

Digital Light Processing (DLP) is an advanced additive manufacturing technology which has garnered substantial recognition and has been extensively applications in various fields. This review focuses on the precision microfabrication process of DLP, providing an overview of the DLP 3D printing system, including the digital light engine, project lenses, motorised stage and resin vat for micro-structure fabrication. Additionally, this review paper comprehensively analyses commercially available DLP printers, covering resolution, cost and a detailed discussion on the importance of photopolymer resins, emphasising the monomer, photo-initiator, photoabsorber, etc. Based on the photopolymerisation theory, the DLP high-precision printing process is analysed, which is …

Morton-Ordered Gpu Lattice Boltzmann Cfd Simulations With Application To Blood Flow, Gerald Gallagher, Fergal J. Boyle

Conference Papers

Computational fluid dynamics (CFD) is routinely used for numerically predicting cardiovascular-system medical device fluid flows. Most CFD simulations ignore the suspended cellular phases of blood due to computational constraints, which negatively affects simulation accuracy. A graphics processing unit (GPU) lattice Boltzmann-immersed boundary (LB-IB) CFD software package capable of accurately modelling blood flow is in development by the authors, focusing on the behaviour of plasma and stomatocyte, discocyte and echinocyte red blood cells during flow. Optimised memory ordering and layout schemes yield significant efficiency improvements for LB GPU simulations. In this work, comparisons of row-major-ordered Structure of Arrays (SoA) and Collected …

Development & Validation Of A Piv System For Obtaining Data From A Uasb Reactor, Camila D' Bastiani, Gerald Gallagher, David Kennedy, Anthony Reynolds

Conference Papers

Anaerobic digestion processes can generate energy in the form of biogas while treating organic wastewater. The efficiency of the treatment, and thus the generation of biogas, is closely linked to the type and design of the reactor, and the technology used. Granular anaerobic digestion technology offers advantages such as a higher loading rate and reduction of the space needed. However, the hydrodynamics inside this type of reactor can be complex due to the presence of solids (granules) and gas (biogas) phases along with the liquid phase (wastewater). This is one of the reasons why the study and optimization of reactors …

Tidal Current Turbine Blade Optimisation With Improved Blade Element Momentum Theory And A Non-Dominated Sorting Genetic Algorithm, Eng Jet Yeo, David Kennedy, Fergal O'Rourke

Articles

Tidal current energy has the advantage of predictability over most of the other renewable energy resources. However, due to the harsh operating environment and complicated site conditions, developments in this domain have been gradual. Paramount to these points is device design and optimisation of hydrodynamic performance. Recent developments in the correction models of BEM theory have further improved the accuracy of the prediction model. Using an improved blade element momentum theory model that is capable of accurately capturing the downwash angle and combining it with a well-developed and reliable non-dominated sorting genetic algorithm model, an effective and efficient tidal current …

Building Performance - Societal Drive, Programme And Symposium, Joseph Little, Patrick Daly

Articles

Society is increasingly looking at the construction industry to mitigate the environmental crisis and solve the housing crisis through wholesale embrace of three broad sets of challenges. The MSc in Building Performance (Energy Efficiency in Design) (MSc BP(EED)) was created in 2017 to provide significant upskilling in the knowledge, skills, and software applications of building design professionals so that they can meet these challenges, while creating compliant, sustainable, super-low energy, new and renovated buildings. The delivery of the programme supports upskilling of employed building design professionals at Masters level, encouraging a minority to develop their capacity and interest in research …

In-Flow Dynamics Of An Area-Difference-Energy Spring-Particle Red Blood Cell Model On Non-Uniform Grids, Brendan Walsh, Fergal Boyle

Articles

In this paper the area-difference-energy spring-particle (ADE-SP) red blood cell (RBC) structural model developed by Chen and Boyle is coupled with a lattice Boltzmann flux solver to simulate RBC dynamics. The novel ADE-SP model accounts for bending resistance due to the membrane area difference of RBCs while the lattice Boltzmann flux solver offers reduced computational runtimes through GPU parallelisation and enabling the employment of non-uniform meshes. This coupled model is used to simulate RBC dynamics and predictions are compared with existing experimental measurements. The simulations successfully predict tumbling, tank-treading, swinging and intermittent behaviour of an RBC in shear flow, and …

Development Of A New Electro-Osmotic Consolidation Apparatus, Yenni Mariana Ramírez-Mazo, Juan Pablo Osorio, Sergio Agudelo

Conference papers

Electro-osmotic consolidation is a ground improvement technique in which a DC voltage is applied to the soil via electrodes, in order to drain the water contained in the pores increasing the effective stress, and thus improving the geotechnical properties of the soil. The technique increases the shear strength, reduces the compressibility, and changes the chemical composition of the saturated soft clayey and silty soils to which it can be applied. Electro-osmotic consolidation has been successfully applied in different projects worldwide. This paper presents the development of a new electro-osmotic consolidation apparatus built at Universidad de Antioquia. Tests were carried on …

Experimental Investigation Of The Performance Of A Hybrid Self-Healing System In Porous Asphalt Under Fatigue Loadings, Shi Xu, Liu Xueyan, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, which is designed to achieve autonomic damage repair in asphalt pavement, offers a great life-extension prospect and therefore not only reduces pavement maintenance costs but also saves energy and reduces CO2 emissions. The combined asphalt self-healing system, incorporating both encapsulated rejuvenator and induction heating, can heal cracks with melted binder and aged binder rejuvenation, and the synergistic effect of the two technologies shows significant advantages in healing efficiency over the single self-healing method. This study explores the fatigue life extension prospect of the combined healing system in porous asphalt. To this aim, porous asphalt (PA) test specimens with …

A Novel Drive Cycle Simulation Model For Gasoline Engines To Investigate Bandwidth Coverage Of Emission Performance And Fuel Consumption With Engine Control Parameters, Martin Giencke

Doctoral

The presented work is offering an investigation how the bandwidth of vehicle specific attributes is impacting engine control parameter requirements for warmup control of the catalytic converter, aiming to ease the development process by providing mathematical means for an automatic generation of control settings. For the specific purpose, a novel drive cycle simulation approach is developed, focusing on emission performance and fuel consumption of a gasoline engine. Steady state and quasi steady state measurements are collected to quantify the impact of modifications to control parameters on emission concentration, exhaust gas temperature and engine torque, especially directly after a cold start. …

Deployment And Control Of Adaptive Building Facades For Energy Generation, Thermal Insulation, Ventilation And Daylighting: A Review, Hani Alkhatib, Philippe Lemarchand, Brian Norton, Dominic O'Sullivan

Articles

A major objective in the design and operation of buildings is to maintain occupant comfort without incurring significant energy use. Particularly in narrower-plan buildings, the thermophysical properties and behaviour of their façades are often an important determinant of internal conditions. Building facades have been, and are being, developed to adapt their heat and mass transfer characteristics to changes in weather conditions, number of occupants and occupant’s requirements and preferences. Both the wall and window elements of a facade can be engineered to (i) harness solar energy for photovoltaic electricity generation, heating, inducing ventilation and daylighting (ii) provide varying levels of …

Biomechanics Of Head Impacts In An Unhelmeted Sport, Stephen Tiernan

Doctoral

Concussion in sport is very common and often the injury is undetectable using CT and MRI scans. In addition, approximately 50% of concussions areunreported.The project initially investigated the suitability of a skin patch sensor and a head-band sensorfor the measurement of head impacts in unhelmeted sports. It was found that both were unsuitable due to large angular accelerationerrors. Thestudy then collaborated withCAMLab at Stanford University and 25 Mixed Martial Arts (MMA) athletes were fitted CAMLab’s validated instrumented mouthguard. 451 video confirmed impacts were recorded at 19 sparring and 11 competitive MMA events. Five concussions were diagnosed during the competitive events. …

Gamification Of Icebreaking Activities For Mechanical Engineering Students Embarking On A Problem Based Learning Module, Kevin Delaney, Gerard Nagle, Mingzhu Chen

Conference papers

When they enter the workforce engineering graduates must be able to engage collaboratively with others to find solutions to complex engineering challenges. This involves a great deal more than simply solving technical problems traditionally taught in engineering school. The Mechanical Engineering Discipline in Technological University Dublin (TU Dublin) has helped students develop real-world engineering skills through a team based Problem Based Learning (PBL) module since 2005. This module, involving third year students, can be particularly challenging since participants can join the third year of the program from other programs or universities and many will not have known each other prior …

Social Enterprise And Sustainability: Key Factors That Lead To The Successful Establishment Of Sustainable Development Initiatives In Ireland, Gerard Doyle

Doctoral

International research points to the positive impact that social enterprises with an environmental focus (also referred to as sustainable development initiatives) perform in the transition to low carbon societies. This thesis examines the capacities required for the establishment and maintenance of sustainable development initiatives in Ireland. The thesis is based on five pieces of research which are either published in international peer-reviewed publications or of a publishable standard. One of the published pieces provides an explanatory framework addressing the reasons why the social enterprise sector in Ireland is less developed than in a number of European countries, details a number …

A Generalisable Bottom-Up Methodology For Deriving A Residential Stock Model From Large Empirical Databases., Ciara Ahern, Brian Norton

Articles

Average reference dwellings representing a predominant housing typology are defined in this work. Specifying such reference buildings is a prerequisite for (i) calculating cost-optimal energy performance requirements for buildings and building elements and (ii) ensuring valid calculations of national building energy consumption. In the EU, an Energy Performance Certificate (EPC) rating is an assessment of the energy consumption of a dwelling. The use of inappropriate default-values for the building envelope thermal transmittance coefficients (U-values) and standardised thermal bridging transmittance coefficients (Y-values) in the production of EPCs leads to an over-estimation of potential energy savings from interventions in the existing dwelling …

The Application Of Evolutionary Algorithms In Multi-Objective Design And Optimization Of Air Cooled Heatsinks, Younis Osama Abdelsalam, Sajad Alimohammadi, Tim Persoons

Articles

Genetic algorithms (GAs) are considered to be one of the main types of evolutionary algorithms (EAs) and are being increasingly used in various engineering design applications. To a large extent, plate-fin heatsinks are used in the thermal management of compact electronic equipment and data centers. The shape optimization of the heatsinks is not rigorously investigated during the design process of high power electronics. Any improvements in the effectiveness of the heatsinks impact the energy consumed by large-scale information communication technology (ICT) facilities including data centers and telecommunication systems and promote a more sustainable use of raw materials. This paper investigates …

Three-Phase Hydrodynamic Simulation And Experimental Validation Of An Upflow Anaerobic Sludge Blanket Reactor, Camila D' Bastiani, Jéferson Luis Alba, Gabriel Tomazzoni Mazzarotto, Severino Rodrigues De Farias Neto, Anthony Reynolds, David Kennedy, Lademir Luiz Beal

Articles

This research focuses on performing multiphase solid/liquid/gas CFD simulations of a UASB reactor in order to obtain a validated model that provides a clearer understanding of the hydrodynamic behaviour of the three phases in UASB reactors. Eulerian–Eulerian, laminar, three-dimensional, multiphase simulations are carried out using Fluent 16.2. The liquid phase velocity and flow profile are validated through PIV experiments. A liquid mean velocity difference of 8.45% is found between the experimental and numerical results, thus validating the CFD model. Shadowgraphy is applied successfully to validate the biogas phase velocity and bubble size. Based on the hydrodynamic analysis results, the reactor …

A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect of the above two technologies, where induction heating serves as the asphalt damage repair mechanism, requiring just 2 min heating time and encapsulated rejuvenator will replenish (rejuvenate) aged asphalt binder and reinstate bitumen’s healing ability. Moreover, the increased temperature from induction heating could in turn accelerate the diffusion process of rejuvenator into aged …

A Preconditioned Lattice Boltzmann Flux Solver For Steady Flows On Unstructured Hexahedral Grids, Brendan Walsh, Fergal Boyle

Articles

The lattice Boltzmann flux solver (LBFS), first introduced by Shu et al. (2014) on structured meshes, allows fluid flow problems to be solved on unstructured meshes discretised by the finite volume method. The solver calculates the macroscopic fluxes at the cell interfaces from a local reconstruction of the lattice Boltzmann solution. In this paper the LBFS is extended to three-dimensional unstructured hexahedral meshes and a preconditioned lattice Boltzmann flux solver (PLBFS) is presented. The PLBFS involves applying the preconditioning technique proposed by Guo (2004) to the LBFS and is achieved by modifying the equilibrium distribution function used to calculate the …

Carbon-Based Interlayers In Perovskite Solar Cells, Aleksandr P. Litvin, Xiaoyu Zhang, Kevin Berwick, Anatoly V. Fedorov, Weitao Zheng, Alexander V. Baranov

Articles

Perovskites are solution-processed, high-performance semiconductors of interest in low-cost photovoltaics. The interfaces between the perovskite photoactive layers and the top and bottom contacts are crucial for efficient charge transport and minimizing trapping. Control of the collection of charge carriers at these interfaces is decisive to device performance. Here, we review recent progress in the realization of efficient perovskite solar cells using cheap, easily processed, stable, carbon-based interlayers. Interface materials including graphene, carbon nanotubes, fullerenes, graphene quantum dots and carbon dots are introduced and their influence on device performance is discussed.

Cognitive Performance In Midlife Type 2 Diabetes: Results Form The Enbind Study, A. H. Dyer, L. Mckenna, G. Gamage, N. M. Bourke, Isabelle Killane, M. Widdowson, C. P. Woods, J. Gibney, R. Reilly, D. O'Neill, S. P. Kennelly

Articles

Aims: To establish the impact of uncomplicated type 2 diabetes on cognitive and neuropsychological performance in midlife. Methods: We performed a cross-sectional study of middle-aged adults with uncomplicated type 2 diabetes and a cohort of healthy control participants. General cognition was assessed using the Montreal Cognitive Assessment test and neuropsychological assessment was undertaken using a detailed neuropsychological assessment battery. Results: A total of 152 participants (102 with type 2 diabetes and 50 controls) were recruited (mean age 52 ± 8 years, 51% women). Participants with midlife type 2 diabetes were more than twice as likely to make an error on …

Evaluating Compressive Properties And Morphology Of Expandable Polyurethane Foam For Use In A Synthetic Paediatric Spine, Nor Amalina Muhayudin, Khairul Salleh Basaruddin, Fiona Mcevoy, Anthony Tansey

Articles

An expandable rigid PU foam can turns into complex shapes, with a shell like structure onthe outside and honeycomb structure on the inside, which can be easily shaped to a vertebraform. The present study aims to determine whether expandable rigid polyurethane foamwas an appropriate substitute for rigid block polyurethane foam to model the trabecularbone. Static compression tests were performed to determine compressive moduli and yieldstresses on three polyurethane foam densities namely 0.16 g/cm3, 0.24 g/cm3and 0.42 g/cm3.Morphology of the PU foams for all densities was also observed. The compressive modulusfor 0.16 g/cm3and 0.24 g/cm3were found varied from 40 to 43 …

Energy Performance Certification: Misassessment Due To Assuming Default Heat Losses, Ciara Ahern, Brian Norton

Articles

Energy Performance Certificates (EPCs) are issued when dwellings are constructed, sold or leased in the EU. Where the cost of obtaining the required data is prohibitive, EPC assessors use nationally applicable default-values. To ensure that dwellings are not assigned a wrongly-higher EPC rating, a standardised thermal bridging transmittance coefficient (Y-value) is typically adopted for all existing dwellings while worst-case overall heat loss coefficients (U-values) are used. Default U-values are applied to a specific building element type (roof, wall, floor etc.) based on building codes and regulations applicable at time of construction. Due to significant building fabric upgrades, default U-values are …

Experimental Investigation Of Flow Pulsation Waveforms In Rectangular Mesochannels For High Heat Flux Electronics Cooling, Jaakko Mcevoy, Sajad Alimohammadi, Tim Persoons

Articles

The ever rising heat fluxes encountered in electronic devices present a challenging thermal engineering problem. Not only is heat transfer enhancement a goal but more recently control of the enhancement is desired, especially in large scale data facilities where the heated outlet coolant fluid may be of use. Flow pulsation is one of the most common active heat transfer enhancement methods studied across all heat sink sizes. While the effects of pulsation have been shown to increase heat transfer under certain conditions there is still disagreement upon its merit for practical applications, with the majority of previous research has been …

A Generalisable Bottom-Up Methodology For Deriving A Residential Stock Model From Large Empirical Databases, Ciara Ahern, Brian Norton

Articles

Specifying representative reference buildings as a prerequisite for calculating cost-optimal energy performance requirements for buildings and building elements. Appropriate characterisation is prerequisite data for an overall national building energy consumption model to produce valid outcomes. Energy Performance Certificates (EPCs) are issued in the EU, for dwellings whenever they are constructed, sold or leased. Where acquiring data for an EPC would be prohibitively costly, nationally applicable default-values are employed for the building envelope thermal transmittance coefficients. Significant levels of retrofits led to the default-values used now being higher than is typical in reality, leading to characterisations of reference dwellings based on …