Mechanical Engineering Commons^™

Cam And Design For Manufacturing: Developing A Project-Based Learning Course, Stephen Pierson

Mechanical Engineering Undergraduate Honors Theses

To effectively serve student career success, mechanical engineering programs must teach students how to account for manufacturing considerations in design. Despite this, manufacturing education is a glaring area of need in current engineering curricula. In fact, basic manufacturing knowledge is one of the only hard skills consistently ranked as one of the greatest weaknesses of mechanical engineering hires in surveys of industrial employers over the last few decades. Without radically changing departmental curriculum to include more emphasis on design-build projects, one solution to combat this is to incubate a lab course in mechanical engineering programs in which undergraduates would practice …

Code To Combustion: Cnc Rotor Replication Using Cam, Luis Luna

Publications and Research

In the current landscape, computer-aided design (CAD) and computer numerical control (CNC) technologies have greatly enhanced manufacturing processes, allowing rapid and high-precision production. This project will focus on recreating a Wankel engine rotor, using SolidWorks for design and Mastercam for Computer-Aided Manufacturing (CAM) simulations. The process begins with SolidWorks, which is used for a template of a high-precision rotor model. Mastercam is then utilized for the CAM programming, allowing for the creation of intricate tool paths and tool usage simulations. This approach is vital for complex objects like the Wankel engine rotor, which demands high precision. The primary objective of …

Parametric Bicycle Yoke, Colin Reay, Walter Minehart, Robby Harrigan, Jordan Olson

Mechanical Engineering

This report outlines the entire design, fabrication, and validation process of a parametric yoke design that addresses the packaging problem of the bottom-bracket chainstay junction in modern bicycle frames. The goal was to create an elegant, space-efficient solution that is accessible to the Cal Poly Bike Builders Club. The report includes documentation of the three-part fixture system, manufacturing process, and testing results for the yoke.

Our yoke design outperforms traditional round-tube weldments in torsional and vertical stiffness. Additionally, all manufacturing fixtures and machining operations function as intended, resulting in a finished yoke that meets all required tolerances in under an …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Monitoring Of Tool Wear And Surface Roughness Using Anfis Method During Cnc Turning Of Cfrp Composite, Md Mofakkirul Islam

Theses and Dissertations

Carbon fiber-reinforced plastic (CFRP) is gaining wide acceptance in areas including sports, aerospace and automobile industry . Because of its superior mechanical qualities and lower weight than metals, it needs effective and efficient machining methods. In this study, the relationship between the cutting parameters (Speed, Feed, Depth of Cut) and response parameters (Vibration, Surface Finish, Cutting Force and Tool Wear) are investigated for CFRP composite. For machining of CFRP, CNC turning operation with coated carbide tool is used. An ANFIS model with two MISO system has been developed to predict the tool wear and surface finish. Speed, feed, depth of …

Sensor Comparison For Low-Cost Dynamic Force Measurement In Milling, Zachary Mason

Masters Theses

Machine cutting forces are commonly measured using piezoelectric dynamometers. Such dynamometers can be prohibitively expensive and may still require extensive post processing. Previous work used a low-cost single degree of freedom constrained motion dynamometer (CMD) in conjunction with a knife edge sensor to determine the cutting forces through inverse force filtering. In that approach, the measured displacement of the CMD was transformed into the frequency domain by the fast Fourier transform (FFT) and convolved with the inverted receptance frequency response function (FRF) to yield force in the frequency domain. The force was then converted to the time domain using the …

Quickcut Waterjet Cutter, Kennedy Dunn, Jacob Storrow, Benjamin Laughrey

Williams Honors College, Honors Research Projects

The QuickCut Waterjet Cutter was created in 2019 as a senior design project. This is the third iteration of the waterjet cutter. The goal of this project was to create an operable CNC waterjet cutter that is able to cut 1/16” tensile specimens consisting of nonferrous metal or plastic. This machine will be utilized in the Manufacturing Laboratory at the University of Akron to provide education to interested students on the waterjet cutting process, how it operates, and industrial application of the technology. Waterjet cutting is a subtractive manufacturing process which is recognized for its specialized applications such as cutting …

Sustainability Assessment Of Direct Energy Deposition (Ded) Based Hybrid Manufacturing Using Life Cycle Assessment (Lca) Method, Faujia Islam

Graduate Theses, Dissertations, and Problem Reports

As sustainability has emerged as a highlight for almost every field over the last few decades, the manufacturing field is no exception. Generally, additive manufacturing performs better than traditional manufacturing in terms of sustainability because of its lean energy- and material usage. Previous studies have compared the sustainability performance between traditional and additive manufacturing, but hybrid manufacturing was not focused upon much. In this paper, the life cycle assessment method is used to analyze and compare the energy consumption and environmental impact of direct energy deposition (DED) based hybrid manufacturing and traditional manufacturing “CNC milling” process for a turbine blade. …

Cwu Bottle Opener Manufacturing, Austin Sanford

All Undergraduate Projects

Previous students from the Mechanical Engineering Technology program came up with a method to help raise funds and awareness for the program. The idea was to manufacture and sell CWU bottle openers. However, a more efficient manufacturing method was needed. The aspect of the process that would have the most impact on the manufacturing time and material efficiency was the CNC machining of the parts. There were many potential variables to change to improve the process, but the main changes were to the cutter speeds and stock material size. Consequently, the changes made to stock material size reduced the number …

Metals Am Design For Manufacturing, Maren Cosens, Ben Wong, Kevin Hale

Mechanical Engineering

We are looking to improve upon the current post processing techniques for metal additive manufacturing (AM). This project, sponsored by Lawrence Livermore National Laboratory (LLNL), will investigate ways to improve the design of stainless steel 316 parts made by AM, and how these designs will help with post processing techniques. We hope that the findings regarding stainless steel will apply to to improve the AM and post processing handshake in general. In particular, the project will focus on including different features in different basic part design shapes to aid in fixturing and post-processing of the part made by AM. This …

4th And 5th Axis Rotary Table, Dakota Bass, Ricky Riedl, Nicole Slagle, Irene Yee

Mechanical Engineering

No abstract provided.

Automating The Fret Slotting Process Using A Plc Controlled 1.5 Axis Mill, James Stratton

Purdue Polytechnic Masters Theses

Stratton, James A. M.S., Purdue University, August 2011. Automating the Fret Slotting Process Using a PLC Controlled 1.5 Axis CNC Mill. Major Professor: Richard Mark French.

Can automation assist small job shops and hobbyists in the production of stringed instruments? This research set out to answer the question using a quantitative approach to determine if an economical CNC machine could be produced in such a fashion as to seamlessly join the workshop as an affordable, yet precise instrument to aid in the production of stringed instruments. The key was to incorporate common industrial automation equipment into the operation of the …

On-Line Free Form Surface Measurement Via A Fuzzy-Logic Controlled Scanning Probe, Ming Chang, Paul P. Lin

Mechanical Engineering Faculty Publications

This paper presents a system and methodology for on-line free form surface measurement via a scanning contact probe installed on a CNC (computer numerical control) machine. The scanning probe provides more sampling points than any traditional touch trigger type of probes used on CNC machines, and better measuring accuracy than laser displacement sensing or structured lighting. The presented measuring system's main advantage is that the number of measured points can vary with the change of surface curvature. To improve the measuring stability and continuity, fuzzy logic control, in lieu of traditional PID control, is employed. As a result, the …