Mechanical Engineering Commons^™

Energy Savings And Peak Demand Reduction Of A Seer 21 Heat Pump Vs. A Seer 13 Heat Pump With Attic And Indoor Duct Systems - December 2011, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

Experiments were run in an unoccupied 1600 ft2 house, the Manufactured Housing (MH Lab) at the Florida Solar Energy Center (FSEC), to evaluate the delivered performance as well as the relative performance of a SEER 21 variable capacity heat pump versus a SEER 13 heat pump. The performance was evaluated with two different duct systems: a standard attic duct system and an indoor duct system located in a dropped-ceiling space.

2011 Fall Engr333 Project Final Report, Fall 2011 Engr333

ENGR 333

Analysis of the Bunker Interpretive Center (BIC) began during the spring of 2011 with the Engineering 382 Instrumentation Lab. To determine the energy use at the BIC, sensing equipment was placed on 44 different energy consuming devices, ranging from pumps to lights to heating and ventilation (HVAC) equipment. These data were collected over the spring and summer and then analyzed by the Engineering 333 Thermal Systems Design class during the fall of 2011. The class was tasked with determining whether or not the BIC was eligible for Energy Star certification. While the building was built to be LEED Gold certified, …

2011 Fall Engr333 Student Seminar Presentation, 2011 Fall Engr333

ENGR 333

File for student presentation, given by students in the Fall 2010 class of ENGR333.

Technical Note: Friction Factor Diagrams For Pipe Flow, Jim Mcgovern

Articles

This technical note describes diagrams of friction factor for pipe flow that have been prepared using, mainly, the equations that Lewis Moody used to prepare his famous diagram in 1944. The preparation of the new diagrams was prompted by the need for vector graphics versions that could be used for teaching purposes and that could be distributed freely to students and others under a Creative Commons Attribution-Share-Alike license. Using a structure very similar to that of Moody's diagram, variants with the Darcy friction factor and the Fanning friction factor have been prepared. In addition, variants have been prepared that include …

Performance Analysis Of Solar Walls In Minnesota: Final Project Report, Patrick A. Tebbe, Saeed Moaveni, Louis Schwartzkopf

Mechanical and Civil Engineering Department Publications

A study of unglazed transpired solar collectors (referred to as solar walls for this report), has been undertaken. Several installations in the Twin Cities, MN region have been identified, researched, and studied. A combination of weather stations, data logging systems, and building energy management systems were used to collect experimental data on four buildings. Performance calculations were then performed for these buildings and compared with various performance/modeling tools.

2011 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2011 ENGR333 project focused on the Bunker Interpretive Center (BIC) at Calvin University.

I asked the students “What would it take for Calvin College to obtain an Energy Star rating for the BIC? Or, if the BIC already qualifies for an Energy Star rating, what would it take to improve the energy efficiency of the BIC (as measured by Energy Star metrics) by 15%, thereby ensuring Energy Star performance of the building into the future?”

Customer

As I recall, the customer for this project was Biology faculty member Randy Van Dragt.

In Situ Synthesis Of Ultrafine Ss-Mno2/Polypyrrole Nanorod Composites For High-Performance Supercapacitors, Jianfeng Zang, Xiaodong Li

Faculty Publications

We report a remarkable observation that is at odds with the established notion that β-MnO₂ was regarded as an undesirable candidate for supercapacitor applications. The specific capacitance of β-MnO₂ can reach as high as 294 F g⁻¹, which is comparable to the best crystallographic structure, like α-MnO₂. The key is to substantially decrease the size of β-MnO₂ powders to ultra small regime. We demonstrate a facile, simple, and effective approach to synthesizing ultrafine (<10 nm in diameter) β-MnO₂/polypyrrole nanorod composite powders for high-performance supercapacitor electrodes. Our observation may encourage a revisit of the other good …

Characteristics Of The Hydrogen Electrode In High Temperature Steam Electrolysis Process, Chao Jin, Chenghao Yang, Fanglin Chen

Faculty Publications

YSZ-electrolyte supported solid oxide electrolyzer cells (SOECs) using LSM-YSZ oxygen electrode but with three types of hydrogen electrode, Ni–SDC, Ni–YSZ and LSCM–YSZ have been fabricated and characterized under different steam contents in the feeding gas at 850°C. Electrochemical impedance spectra results show that cell resistances increase with the increase in steam concentrations under both open circuit voltage and electrolysis conditions, suggesting that electrolysis reaction becomes more difficult in high steam content. Pt reference electrode was applied to evaluate the contributions of the hydrogen electrode and oxygen electrode in the electrolysis process. Electrochemical impedance spectra and over potential of both electrodes …

Florida Solar Atlas, Florida Solar Energy Center, Charles Cromer

FSEC Energy Research Center®

The direct beam and direct global solar resource values for any geographical location in Florida were found by using actual data taken at the Florida Solar Energy Center (FSEC) for 2010 and correlating those values against clearness values derived from NOAA geostationary satellite data. Using the correlations developed, eleven years of satellite data (2000 - 2010) were used to provide expected monthly average solar resource values for any location in Florida. These values as provided in watts per meter square per day, were matched to colors with the lowest values of the full range of average values representing the deepest …

A Generic Bamboo-Based Carbothermal Method For Preparing Carbide (Sic, B4C, Tic, Tac, Nbc, TiXNb1-XC, And TaX Nb1-XC) Nanowires, Xinyong Tao, Yiping Li, Jun Du, Yang Xia, Yingchao Yang, Hui Huang, Yongping Gan, Wenkui Zhang, Xiaodong Li

Faculty Publications

Finding a general procedure to produce a whole class of materials in a similar way is a desired goal of materials chemistry. In this work, we report a new bamboo-based carbothermal method to prepare nanowires of covalent carbides (SiC and B₄C) and interstitial carbides (TiC, TaC, NbC, Ti_xNb_1−xC, and Ta_xNb_1−xC). The use of natural nanoporous bamboo as both the renewable carbon source and the template for the formation of catalyst particles greatly simplifies the synthesis process. Based on the structural, morphological and elemental analysis, volatileoxides or halides assisted …

New Construction Builders Challenge: Sealed Attic And High Efficiency Hvac In Central Florida: A Year In Review Monitored Prototypes - Springwater Homes, Florida Solar Energy Center, Carlos Colon

FSEC Energy Research Center®

In 2010 the Florida Solar Energy Center (FSEC), with funding from the Building America program, was involved with a new Builders Challenge builder located in Rockledge, Florida -- Springwater Homes (see figure 1). The newly constructed home in March 2010, features a sealed attic with R-27 roof deck insulation (shown in figure 2). Selection of the HVAC system, an important aspect to achieve high efficiency levels in buildings, ended with one of the highest residential equipment systems available in the U.S., the Nutone IQ Drive (SEER 21). The house was confirmed with a HERS index of 53 using the EnergyGauge …

Analyse Du Comportement Réel Et De L'Optimisation Structurelle Des Cycles De Turbines À Gaz, Alexandru Dobrovicescu, Michel Feidt, Lavinia Grosu, Jim Mcgovern, Georgiana Tirca-Dragomirescu

Conference Papers

L’article présente une étude comparative, basée sur l’analyse exégétique, de l’effet de non prise en considération du comportement réel de l’agent thermique et de l’utilisation des modèles simplifiés pour calculer les performances des cycles de turbines à gaz avec et sans récupération de chaleur. Un intérêt spécial a été réservé au processus de combustion et au transfert de chaleur dans le préchauffeur d’air. La variation des destructions et des pertes d’exergie par rapport à la variation des paramètres fonctionnels est présentée.

Some Experiences, Thoughts, Ideas And Open Questions Relating To Applied Thermodynamics, Jim Mcgovern

Articles

In this paper I present some of my thoughts and experiences relating to 'applied thermodynamics' over my career so far. I explain my interest in thermodynamics, describe some topics I have worked on, point out some questions that appear still to be open and outline some ideas for work that could be done. I describe how I was inspired to pursue the area of applied thermodynamics, with reference to a glass, opposed-piston internal combustion engine. I put my heat pump research in the late 1970s briefly into today's context. Some of my research has been in relation to compressors, which …

Arra Advanced Weatherization Training Center - Quarterly Report (January 2011-March 2011), Florida Solar Energy Center, Neil Moyer

FSEC Energy Research Center®

The 1st quarter of 2011 was the beginning of procurement for the training center. Two pieces of equipment, the insulation blowing machine and infrared cameras, were put out for quotes. Both have been selected and purchase orders created.

Building America Industrialized Housing Partnership (Baihp Ii) Final Report Budget Periods 1-5, April 1, 2006 - November 30, 2010, Florida Solar Energy Center, Robert Abernethy

FSEC Energy Research Center®

This report summarizes the work conducted by the Building America Industrialized Housing Partnership (BAIHP - www.baihp.org) during the final budget period (BP5) of our contract, January 1, 2010 to November 30, 2010. Highlights from the four previous budget periods are included for context.

BAIHP is led by the Florida Solar Energy Center (FSEC) of the University of Central Florida. With over 50 Industry Partners including factory and site builders, work in BP5 was performed in six tasks areas:

• Task 1: Building America System Research Management, Documentation and Technical Support
• Task 2A: Stage G1A: Integrated Solutions for Specific Climate Regions
• Task …

Short-Term Curtailment Of Hvac Loads - Executive Summary, Florida Solar Energy Center, Lixing Gu

FSEC Energy Research Center®

Rapidly increasing requirements placed on utilities to reduce peak loads has led to utility customer incentives to shift peak demand to non-peak times or reduce peak loads when notified by the utility that the grid is close to capacity. This study investigates methods used to reduce building demand during a fixed time window near a utilities on-peak period. The window was chosen to be 5-9 A.M. in winter and 2-5 P.M. in summer. The most common methods for reducing building peak demand were reviewed and categorized by their usefulness and wide-spread availability. These strategies were reductions in lighting power density, …

Arra Advanced Weatherization Training Center - Quarterly Report (September 2010-December 2010), Florida Solar Energy Center, Neil Moyer

FSEC Energy Research Center®

The 4th quarter of 2010 was the initialization of the contract with DOE. During this time period, there were two major events that occurred. First, representatives from UCF-FSEC attended the three day Atlanta Weatherization Training Center Grantee Training Workshop with DOE representatives and the various organizations that were awarded funding. Secondly, the project management plan (PMP) was finalized and submitted to the Project Manager.

Toward A Zero Energy Home: Applying Swiss Building Practices/Attitudes To U.S. Residential Construction, Daphene C. Koch, William Hutzel, Jason M. Kutch, Eric A. Holt

School of Engineering Technology Faculty Publications

This project evaluated typical U.S. and Swiss homes to identify construction practices that are most energy efficient and have economic payback. A net zero energy home (ZEH) produces as much energy as is consumed in it over time. Students in a College o f Technology in a Midwest Indiana State University and a technical University in Switzerland resulted in developing models of homes that combined U.S. and Swiss standards. The project was completed in two phases: during the first phase o f this project, construction costs, energy use, and economic payback was calculated for six homes that were designed using …

A Method For Defining Wind Turbine Setback Standards, Jonathan Rogers, Nathan Slegers, Mark Costello

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Setback distances established by regulatory authorities to minimize the probability of blade fragment impact with roads, structures and infrastructure can often have a significant impact on wind farm development. However, these minimum distance requirements typically rely on arbitrary rules of thumb and are not based on a physical or probabilistic analysis of blade throw. The work reported here uses a probabilistic approach to evaluate the effectiveness of current standards and to propose a new technique for determining setback distances. This is accomplished through the use of a dynamic model of wind turbine blade failure coupled with Monte Carlo simulation techniques …

Wind Energy Potential For Reverse Osmosis Desalination Plants In La Guajira, Colombia, Carlos Martinez-Smit

Faculty-Selected Student Works

Project report required by the Master of Science Degree in Renewable and Clean Energy.

Abstract:

The region of La Guajira, located in the north of Colombia, has a lot of potential for wind power with annual average wind speeds up to 11 m/s at 10 m height in some locations, according to the national wind map. Most of the wind potential is located in Upper Guajira, where 90% of the population is indigenous Wayuu people (among the country’s poorest population) and it is also characterized with low precipitation, 500 mm/yr, high evapotranspiration, 1500 mm/yr, and low humidity. All this creates …

Optical Cell For Combinatorial In Situ Raman Spectroscopic Measurements Of Hydrogen Storage Materials At High Pressures And Temperatures, Jason R. Hattrick-Simpers, Wilbur S. Hurst, Sesha S. Srinivasan, James E. Maslar

Faculty Publications

An optical cell is described for high-throughput backscattering Raman spectroscopic measurements of hydrogen storagematerials at pressures up to 10 MPa and temperatures up to 823 K. High throughput is obtained by employing a 60 mm diameter × 9 mm thick sapphire window, with a corresponding 50 mm diameter unobstructed optical aperture. To reproducibly seal this relatively large window to the cell body at elevated temperatures and pressures, a gold o-ring is employed. The sample holder-to-window distance is adjustable, making this cell design compatible with optical measurement systems incorporating lenses of significantly different focal lengths, e.g., microscope objectives and single element …

Mechanical Characterization Of Polymer Electrolyte Membrane With Optical Methods, Xinyu Huang, Luis Alva, Jay Neutzler

Faculty Publications

Mechanical properties of polymer electrolyte membrane have important implications in the endurance of many electrochemical energy conversion devices [1]. Mechanical experiments are effective method to reveal discrete damage developed in the membrane by quantifying the change of mechanical strength and toughness. Regular strain measurement methods are overly intrusive to the thin and relatively fragile polymer electrolyte membrane; hence optical-based minimal invasive stress/strain measurement methods are studied.

Nebraska Summary: S809 Case-Ih Puma 130, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S796 Massey Ferguson 5475, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2004: John Deere 8310r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1989: John Deere 7130, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S814 New Holland T7.200, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S813 New Holland T7.185, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S812 New Holland T7.170, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S811 Case-Ih Puma 160, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …