Mechanical Engineering Commons^™

Synthesis And Characterization Of Tin (Sn) Incorporated Ga2o3, Guillermo Nicolas Gutierrez

Open Access Theses & Dissertations

In this work, we report on the synthesis, characterization of tin (Sn) incorporated gallium oxide Ga2O3 compounds, also included in this work is the effect of tin concentration related to the optical and electrochemical properties. The Sn incorporation into Ga2O3 creates a significant reduction in the bandgap and causes a nonlinear optical activity as the concentration varies. Substantial investigation performed to the structure, phase, and morphology of the mixed compounds governed by the stoichiometry equation Ga2−2xSnxO3-ɗ indicates that the Sn incorporation from 0.00 ≤ x ≤ 0.30 has a significant effect on these properties. To synthesize the Ga-Sn-O compounds a …

Accurate Replication Of An Ear Pinnae Geometry For Use In Acoustic Testing Of Spatial Cues And Sound Localization, Alejandra Belmont

Open Access Theses & Dissertations

Additive manufacturing (AM) enables freedom of design as well as fabrication of complex objects such as the human hear. In medical modeling there is a need for patient-specific customizable parts. The outer human ear consists of these main parts: the pinna, which naturally filters sound, and the ear canal, which is the point at which sound enters before being moved up to the tympanic membrane, otherwise known as the eardrum. In an attempt to accurately replicate ear models, the use of scanning and reverse engineering methods was used. A comparison of 3D laser scanning systems was performed to determine their …

Redesign Of A Volume Adjustable Transtibial Prosthetic Socket, Samuel Terrazas Quezada

Open Access Theses & Dissertations

Recent research and development in prosthetics have aimed at improving socket designs and components to mimic more efficiently the human body. One such innovation is the Aperture Socket, a low-cost volume adjustable prosthetic socket. During the validation stage of its development, the Aperture Socket successfully demonstrated that it could compensate for volume changes, but various improvements on use and comfort were identified. This project develops and tests a redesign of the Aperture Socket previously developed for amputees in developing countries and subsequently patented and licensed to LIMBS International, Inc.

The first phase of this study was the creation of various …

Organic-Inorganic Graphite And Transition Metal Dichalcogenide Based Composites For 3d Printing, Jorge Alfredo Catalan Gonzalez

Open Access Theses & Dissertations

This project was multipronged to help fuse together topics of additive manufacturing and two-dimensional (2D) layered materials, and studying the mechanical and electrical properties of the composites produced. The composites are made from the thermoplastic polymer acting as a matrix and the graphite and 2D transition metal dichalcogenides (TMDs) serving as the filler or reinforcement. Different concentrations of TMD's were added to the matrix to study the effect of composition on the mechanical and electrical properties. To shed insights into the mechanical properties, test coupons were produced as "dog bone" structures for tensile testing using the ASTM D638 type 5 …

G-Code Generation For Multi-Process 3d Printing, Callum Peter Bailey

Open Access Theses & Dissertations

Since the inception of stereolithography in the 1980s, interest in 3D printing has exploded, with desktop 3D printers now commercially accessible to the general public. In recent years, next-generation multifunctional technologies have been developed, which combine 3D printing with other technologies such as wire embedding, foil embedding, CNC machining, and robotic component placement, enabling complex parts to be made on a single multifunctional machine.

However, the complexity of these integrated processes exceeds the capabilities of established design tools. To this end, this Thesis aims to develop a multi-functional design solution that can automatically generate final control code for next-generation multifunctional …

Modeling Of Piezoelectric Traveling Wave Rotary Ultrasonic Motors With The Finite Volume Method, Ivan Arturo Renteria Marquez

Open Access Theses & Dissertations

In 1983 Toshiiku Sashida developed a new motor concept called Piezoelectric Traveling Wave Rotary Ultrasonic Motor (PTRUSM). The advantages of these motors include high torque at low speed, absence of a generated magnetic field, and high potential for miniaturization. Unfortunately PTRUSMs have some disadvantages that limit the areas of applications for these types of motors. The disadvantages are a short operating life (about 1000 hours), small output power, and the need of a complex motor controller.

On one hand, these motors have been used in satellites, mobile phones, photocopiers, robotic arms, telescopes, automobiles, and camera autofocusing. On the other hand, …

Creating Multi-Functional G-Code For Multi-Process Additive Manufacturing, Efrain Aguilera Jr

Open Access Theses & Dissertations

Additive manufacturing (AM) started over thirty years ago and with it a manufacturing revolution that moves industrial production into the personal home. With recent interest shifting into multi-functional parts fabricated through AM technologies, unified systems are being developed. Merging different manufacturing technologies into one single machine is a challenge but undergoing research has shown promise in the development of multi-functional systems. Concurrent work is being done in the software, automation, and hardware aspect of multi-functional systems. An effort to use industry compatible Computer Aided Design (CAD) software to design multi-functional parts including circuits, micro-machining, and foil embedding then exporting and …

Modeling And Preliminary Characterization Of Passive, Wireless Temperature Sensors For Harsh Environment Applications Based On Periodic Structures, Diego Ivan Delfin Manriquez

Open Access Theses & Dissertations

Wireless temperature sensing has attained significant attention in recent years due to the increasing need to develop reliable and affordable sensing solutions for energy conversion systems and other harsh environment applications. The development of next generation sensors for energy production processing parameters, such as temperature and pressure, can result in better performance of the system. Particularly, continuous temperature monitoring in energy conversion systems can result in enhancements such as better system integrity, less pollution and higher thermal efficiencies. However, the conditions experienced in these system components hinder the performance of current solutions due to the presence of semi-conductor materials and …

Novel Classification Of Slow Movement Objects In Urban Traffic Environments Using Wideband Pulse Doppler Radar, Berta Rodriguez Hervas

Open Access Theses & Dissertations

Every year thousands of people are involved in traffic accidents, some of which are fatal. An important percentage of these fatalities are caused by human error, which could be prevented by increasing the awareness of drivers and the autonomy of vehicles. Since driver assistance systems have the potential to positively impact tens of millions of people, the purpose of this research is to study the micro-Doppler characteristics of vulnerable urban traffic components, i.e. pedestrians and bicyclists, based on information obtained from radar backscatter, and to develop a classification technique that allows automatic target recognition with a vehicle integrated system. For …

Design And Development Of Implantable And Remote Controlled Distraction Osteogenesis Device For Limb Lengthening Practice In Children, Mario Eduardo Rodriguez De La O

Open Access Theses & Dissertations

Recent technology improvements have been positively affecting medical industry in recent years since procedures and equipment are more precise and reliable. Nevertheless, there are still surgical procedures and medical devices that not fully address specific needs according to medical experts. One of those necessities is focused on options available for children patients when subjected to a surgical procedure named distraction osteogenesis. In general, distraction osteogenesis is performed when skeletal deformities need to be corrected or when bone lengthening is required, typically a mechanism is utilized to elongate bone at a controlled rate. The existing osteodistraction methods for limb lengthening and …

Inkjet Based Personalized Screening Platform For Cancer Therapy, Jorge Ivan Rodriguez

Open Access Theses & Dissertations

The new paradigm of personalized medicine is beginning to affect clinical practice. In particular, many of the advances in genomics and proteomics have made personalized screening and therapeutic inventions possible. On chip, cellomics approaches to screening and intervention are becoming more commonplace. Cancer therapies may benefit from the rise in `-omics' technologies. In addition, the availability of rapid screening data is crucial to mitigate cancer propagation and increase the possibility of patient recovery. This study is an endeavor to develop a cellomic anticancer drug screening process based on inkjet printing. Previous research has demonstrated that inkjet based screening can reliably …

Effect Of Hafnium-Incorporation On The Microstructure And Dielectric Properties Of Cobalt Ferrite Ceramics, Stephen Josiah Wells

Open Access Theses & Dissertations

The effect of hafnium ion (Hf⁴⁺) incorporation in cobalt ferrite (CFO) was studied. Samples of Hf substituted CFO ceramic (CoFe_2-xHf_xO₄), were synthesized in the laboratory with hafnium concentrations ranging from x=0.000 to x=0.200. X-ray diffraction scans show that the Hafnium CFO crystalizes in the inverse spinel phase. Inclusion of hafnium causes lattice expansion, increasing the lattice parameter from 8.374 í? for pure CoFe2O4 to 8.391 í? for the highest concentration of hafnium tested (x=0.020). The dielectric properties of CFO are greatly enhanced by inclusion of hafnium. The enhancement is due to the …

Control Of A Robotic Prototype Multi-Axis Synergistic System, Julio A. Torres

Open Access Theses & Dissertations

Balance is an ability that every person has and uses in normal daily life, to walk, run, stand, dance, etc. However, there are people who suffer a kind of balance impairment. The Computerized Dynamic Posturography (CDP) is technique in balance rehabilitation, where the patient is asked to stand on a moving platform that is equipped with sensors that measure how well you maintain your balance. In this thesis, a new CDP mechatronic system, the Multi-Axis Synergistic System (MASS), for balance assessment is being developed.

As a first stage and as the objective of this research work the transferable control algorithm …

Evaluation Methods For Health Monitoring Of Aerospace Structure Rotary Joints, Sergio Armando Navarro

Open Access Theses & Dissertations

In September 2007, the excessive vibrations played a significant role in the station operation since one of the rotary joints, which provides the station electrical energy, presented an anomaly. The replacement of its bearing components and re-lubrication were necessary to reduce the problem. To avoid a new anomaly, the inspection of the rotary joints performance continues by using the accelerometers data. This thesis presents three new approaches to monitor the vibrations at the International Space Station based on Root-Mean-Square, kurtosis, and Approximate Entropy (ApEn). MATLAB functions and codes were necessary to implement the three monitoring techniques results from the provided …

Scaffold Based In-Vitro Osteodistraction For Bone Tissue Engineering, Cesar Adrian Terrazas

Open Access Theses & Dissertations

Engineering of hard tissues such as bone is a challenge because of the limited ability of the body to heal large defects. Current treatment options, such as employing bone sections from the patient or a deceased donor have been utilized for some time now with various degrees of success. However, these methods still exhibit many limitations such as limited supply and the possibility of transmission of disease.

To address the many limitations of bone grafts, synthetic engineered substitutes have been developed and widely researched for nearly three decades. Generally termed scaffolds, these are matrices that serve the purpose of temporary …

Multidisciplinary Collaborative Model For Complex, Angel Ernesto Delgado

Open Access Theses & Dissertations

Nowadays, most devices with advanced technology require the development of embedded systems with mechanical and electrical components as well as software including more than one discipline. These are devices that are usually complex in terms of composition and functionality and that design must follow a methodology in order to successfully design and launch a device of this nature. Hence, the assembly of a multidisciplinary engineering group is required to carry out such complex devices and develop a fully functional product. The group may also need an expert on the field that can provide guidance and knowledge where needed. This is …

Stereolithography Of Poly(Ethylene Glycol) Hydrogels With Application In Tissue Engineering As Peripheral Nerve Regeneration Scaffolds, Karina Arcaute

Open Access Theses & Dissertations

In recent years, rapid prototyping (RP) technologies initially developed to create prototypes prior to production for the automotive, aerospace, and other industries, have found applications in tissue engineering (TE). Several different RP technologies are being used to fabricate biocompatible 3D structures with controlled micro- and macro-scale characteristics. The focus of this research was to explore the capabilities of the RP technology, stereolithography (SL), for creating complex, 3D scaffolds with applications in TE using a photocrosslinkable biopolymer, poly(ethylene glycol) (PEG). The primary objective was to create an implantable multi-lumen nerve guidance conduit (NGC) for the regeneration of peripheral nerves.

Studies of …