Mechanical Engineering Commons^™

A Constitutive Material Model For Simulating Texture Evolution And Anisotropy Effects In Cold Spray., Creston Michael Giles

Theses and Dissertations

Cold spray has seen rapid advancement since its inception and has shown significant potential as a method of additive manufacturing. However, the large plastic deformation and repeated heating/cooling cycles that the material undergoes during the cold spray process can result in gradients in material structure and large residual stresses. The purpose of this study is to extend the existing EMMI material model to include anisotropic material response through the use of orientation distribution functions to predict residual stresses and anisotropy resulting from cold spray and similar additive manufacturing processes. Through the use of a finite element simulation, yield surfaces for …

Molecular Dynamics Of High Temperature Hydrogen Attack, Mike Travis Bodden Connor

Theses and Dissertations

High temperature hydrogen attack (HTHA) is a damage mechanism that only affects carbon steel and low alloy material. Most of the data regarding HTHA are experimental-driven. Even though this approach has been successful, there are still much more things that the oil and gas industry does not understand about HTHA. The regions that were considered safe (below the Nelson curves) have experienced catastrophic failure. Our research consists of performing Molecular Dynamics (MD) and the Nudge Elastic Band (NEB) calculation of HTHA to better understand the atomistic behavior of this damage mechanism.

Baby Soothing Device, Grace Kalene Mekrut, Matteo Gozzini, Miles Angel Ibarra, Christian Joel Roberts

Mechanical Engineering

This document is the official final design review for the Baby Soothing Device. This product is intended to help families sleep throughout the night by allowing a baby to be soothed back to sleep without constant and direct parental interaction. It is maintained by Mechanical Engineering students at California Polytechnic State University, San Luis Obispo for Dustin Yoder, the project sponsor. The purpose of this document is to present the design process from ideation to finished design in great enough detail that its manufacturing procedure may be replicated if desired. This document further explains all the research, testing, and benchmarks …

Novelty Ice Cream Assembly Prototype, Mason Sylvester, Logan Williamson, Alvaro Martinez, Adin Gilman-Cohen

Mechanical Engineering

Cool Beans USA is a novelty ice cream startup company founded by Keith Zachow. In the winter of 2022, our team began working with Mr. Zachow to develop a machine to automate parts of the production process for his product. This product consists of two hemispherical ice-cream cone shell halves filled with soft serve ice cream and pressed together. The assembled pods are around the size and shape of a small walnut and are intended to be sold in stores as a frozen finger food. At the time of project inception, this product was in its early stages and was …

Rotating Backing Brush, Caleb Savard, David Dalal, Max Allred, Mathis Weyrich

Mechanical Engineering

In the final steps of GAF’s shingle production process, small asphalt particles called fines are applied. Some fines adhere well to the shingle sheet, while others temporarily stick only to fall off the sheet further down the manufacturing line. As a result, the shingle plant floor is covered in fines that have fallen due to vibrations and gravity. The technicians and engineers at GAF want a cleaner working environment and to potentially reuse the loose fines. We are a senior project team that solved this problem by designing a system to remove and collect loose fines. In this document, the …

Multiscale Topology Optimization With A Strong Dependence On Complementary Energy, Dustin Dean Bielecki

All Dissertations

A discrete approach introduces a novel deep learning approach for generating fine resolution structures that preserve all the information from the topology optimization (TO). The proposed approach utilizes neural networks (NNs) that map the desired engineering properties to seed for determining optimized structure. This framework relies on utilizing parameters such as density and nodal deflections to predict optimized topologies. A three-stage NN framework is employed for the discrete approach to reduce computational runtime while maintaining physics constraints.

A continuous representation that uses complementary energy (CE) methods to solve a representative element's homogenized properties consists of an embedded structure that is …

Image Based Processing For Weld Defect Detection, Shems-Eddine Belhout

Masters Theses

There is a growing need for automation in the welding industry due to a growing shortage in skilled welders. TIG [Tungsten Inert Gas] welding, a method of welding that uses an electrode shielded by gas and is fed externally by a wire, is incredibly advantageous for its precise heat control. TIG welding is considered the standard for nuclear application which requires highly precise welds to be performed. Robotic welding can address this issue, and one major problem that occurs during welding is welding defects. Typical weld defect detection requires a highly knowledgeable welder or destructive and nondestructive evaluation. Destructive evaluation …

Multiple Heat Exchanger Cooling System For Automotive Applications – Design, Mathematical Modeling, And Experimental Observations, Zaker Syed

All Dissertations

The design of the automotive cooling systems has slowly evolved from engine-driven mechanical to computer-controlled electro-mechanical components. With the addition of computer-controlled variable speed actuators, cooling system architectures have been updated to maximize performance and efficiency. By switching from one large radiator to multiple smaller radiators with individual flow control valves, the heat rejection requirements may be precisely adjusted. The combination of computer regulated thermal management system should reduce power consumption while satisfying temperature control objectives. This research focuses on developing and analyzing a multi-radiator system architecture for implementation in ground transportation applications. The premise is to use a single …

Design Of A System To Investigate The Relationship Between Feedback And Delivery Medium For A Novel Motor Task, Ashley Humpal

Master's Theses

Stroke is a chronic, lifelong illness, and full recovery requires continuous physical and cognitive rehabilitation. Such long-term rehabilitation is cost-prohibitive; however an approach to providing long-term therapy that has recently gained traction is the use of socially assistive agent (SAA) systems. These systems make use of non-contact communication devices and can be used to guide people through a variety of rehabilitative tasks. They have the potential supplement current rehabilitation practices by providing motivation during intense exercises, and can extend the reach of the therapist into remote and home settings.

Though SAA systems have been used in a variety of rehabilitative …

Numerical Investigation Of Flow And Thermal Behavior In Channels With Pcm-Filled Thermal Energy Storage Columns For Potential Application In Photobioreactors, Sameed Akber

Electronic Thesis and Dissertation Repository

Microalgae has been identified as a potential source in the production of biofuel. Photobioreactors, which are used for microalgae production, normally experience temperature variations over the diurnal cycle due to changes in ambient conditions. The thermal regulation of photobioreactors to minimize temperature variations will result in a higher yield of microalgae, which are sensitive to such variations. The present research is aimed to investigate a novel approach to thermally regulate photobioreactors using phase change materials (PCM) where the latent heat of the material is exploited as the energy storage. The present research uses a numerical approach to study the flow …

Numerical Modeling Of Vocal Control And Patient-Specific Surgical Planning Of Type 1 Thyroplasty, Mohammadreza Movahhedi

Electronic Theses and Dissertations

This study aims to develop knowledge about the roles of intrinsic laryngeal muscles on voice control in both healthy and disordered conditions through comprehensive computational models. The phonation simulator was built by combining a three-dimensional high-fidelity MRI-based model of the larynx, active muscle mechanics, and fluid-structure-acoustic interaction model, which enabled the exploration of the underlayer mechanisms of the link between individual and/or group muscles contractions under both symmetric and asymmetric activations, vocal fold posture, vocal fold vibration, and voice outcomes during voice production.

The first part of this research extensively investigated the effects of cricothyroid and thyroarytenoid muscle activations on …

Data-Driven Research On Engineering Design Thinking And Behaviors In Computer-Aided Systems Design: Analysis, Modeling, And Prediction, Molla Hafizur Rahman

Graduate Theses and Dissertations

Research on design thinking and design decision-making is vital for discovering and utilizing beneficial design patterns, strategies, and heuristics of human designers in solving engineering design problems. It is also essential for the development of new algorithms embedded with human intelligence and can facilitate human-computer interactions. However, modeling design thinking is challenging because it takes place in the designer’s mind, which is intricate, implicit, and tacit. For an in-depth understanding of design thinking, fine-grained design behavioral data are important because they are the critical link in studying the relationship between design thinking, design decisions, design actions, and design performance. Therefore, …

Soft Robotic Arms For Fall Mitigation: Design, Control And Evaluation, Param Malhotra

All Theses

Most fall mitigation devices present a heavy system that avoid injuries to the user by preventing the impact of a fall. They are dependent on the user capability or on the probability that the user falls in the assumed manner the system was designed for. Often that is not the case, hence this project initiates a novel concept of using soft robotic arms to prevent falls from happening in the first place itself and save the user from any injuries. This thesis describes the prototype and development of a soft continuum robotic backpack system. The system can validate its use …

Constraint-Aware, Scalable, And Efficient Algorithms For Multi-Chip Power Module Layout Optimization, Imam Al Razi

Graduate Theses and Dissertations

Moving towards an electrified world requires ultra high-density power converters. Electric vehicles, electrified aerospace, data centers, etc. are just a few fields among wide application areas of power electronic systems, where high-density power converters are essential. As a critical part of these power converters, power semiconductor modules and their layout optimization has been identified as a crucial step in achieving the maximum performance and density for wide bandgap technologies (i.e., GaN and SiC). New packaging technologies are also introduced to produce reliable and efficient multichip power module (MCPM) designs to push the current limits. The complexity of the emerging MCPM …

Development Of A Reverse Engineered, Parameterized, And Structurally Validated Computational Model To Identify Design Parameters That Influence American Football Faceguard Performance, William Ferriell

All Dissertations

Traumatic brain injury (TBI) continues to have the greatest incidence among athletes participating in American football. The headgear design research community has focused on developing accurate computational and experimental analysis techniques to better assess the ability of headgear technology to attenuate impacts and protect athletes from TBI. Despite efforts to innovate the headgear system, minimal progress has been made to innovate the faceguard. Although the faceguard is not the primary component of the headgear system that contributes to impact attenuation, faceguard performance metrics, such as weight, structural stiffness, and visual field occlusions, have been linked to athlete safety. To improve …

Computational Tradespace Exploration, Analysis, And Decision-Making: A Proposed Framework For Organizational Self-Assessment, Julia Daniels

All Theses

The ability to assess technical feasibility, project risk, technical readiness, and realistic performance expectations in early-phase conceptual design is a challenging mission-critical task for large procurement projects. At present, there is not a well-defined framework for evaluating current practices of organizations performing computational trade studies. One such organization is the US Army Ground Vehicle Systems Center (GVSC). When defining requirements and priorities for the next-generation autonomy-enabled ground vehicle system, GVSC is faced with the challenge of an increasingly complex programmatic tradespace due to emerging complexities of ground vehicle systems. This thesis aims to document and evaluate tradespace processes, methods, and …

Foundations For Finite-State Modelling Of A Two-Dimensional Airfoil That Reverses Direction, Jake Michael Oscar Welsh

McKelvey School of Engineering Theses & Dissertations

Current 3-D finite-state wake models are incapable of simulating a maneuver in which the sign of the free-stream velocity changes direction and the rotor enters its own wake -- as might occur in the case of a helicopter which ascends and then descends. It is the purpose of this work to create a 2-D finite-state wake model which is capable of handling changes in free-stream direction as a precursor to development of a 3-D model that can do the same.

The 2-D finite-state model used for reentry modifications is an existing model created by Peters, Johnson, and Karunamoorthy. By the …

Tunable Passive Shock And Vibration Isolators For Rotational Isolation, Chase B. Lemaire

LSU Master's Theses

Shock and vibration isolation are a critical need in helmets, which are widely used to protect athletes, workers, soldiers, and astronauts. Passive vibration isolation systems are a good option when mass and volume should be minimized and when the experienced loadings can be predicted. However, it is frequently challenging to find materials and structures which exhibit the optimal vibration and impact isolation properties for an application. As a case study illustrating a novel design paradigm for rotational shock absorption, a family of optimal solutions for the physical properties of American football helmets is presented. Lumped parameter Simulink models simulate a …

Pressure Disturbance Upstream Of The Boundary Layer Data System, Michelle S. Leclere

Master's Theses

The primary objective for this work was to evaluate the reliability of computational fluid dynamics (CFD) tools in the prediction of upstream surface pressure disturbance and pressure drag of various instrument excrescence shapes for a small aircraft flight test device called the Boundary Layer Data System (BLDS). Insights on pressure disturbance will serve as a guide for the placement of BLDS probes/sensors, and pressure drag can be used to ensure sufficient adhesive is used to install BLDS instrumentation. The Mach number for all CFD cases was 0.12 and the Reynolds number based on excrescence height varied from 4 x 10 …

Interactive Lego Girl Scout Arm, Christopher Suzuki, Emi Okuyama, Bryson Shores, Karina Sandoval

Mechanical Engineering

This Senior Project Report document outlines the senior design project for Girl Scouts of California’s Central Coast (GSCCC) led by a team of four Mechanical Engineering students at California Polytechnic State University, San Luis Obispo. The project encompasses the researching, designing, prototyping, and testing of a LEGO robotic arm for the Girl Scouts to learn more about STEM (Science, Technology, Engineering, and Mathematics) and provide support to each Girl Scouts cookie sales in their stores. Their goal was to build a LEGO robotic arm that will interact with customers at the Girl Scout stores and promote the girl scouts' interest …

Barker Bird Animatronic Senior Project Report, Marcus Monroe, Nolan Clapp, Ishan Jandaur, Jonathan Ogden

Mechanical Engineering

This document describes how our F71 Senior Design Project team developed a 3D printed, electronic bird that mimics Disneyland’s first animatronic, the Barker Bird. An animatronic is a mechanical puppet that replicates real life movement with robotic parts. Disney’s Barker Bird is a well-known animatronic that replicates a talking macaw with multiple moving systems. The final prototype completed by our team serves as a teaching tool for CAPED (Cal Poly Amusement Park Engineers and Designers) club members that are interested in the field of animated robots.

Baja Bug Suspension, James Ankers, Rebecca Hansen, Dakota Robert Hollingsworth, Thomas Alfred Spycher

Mechanical Engineering

The goal of this senior project was to design and build a long travel front suspension system for a VW Bug. This started by defining the scope of the project and performing preliminary research. In this step, similar products were investigated, and research was done on stakeholders and customers. Next, concept development, design, and evaluation were performed. With this, the first iteration of our CAD model was designed, and physical prototypes were made. Using all this information, and feedback from advisors and sponsors, multiple iterations of our CAD were performed until the design was ready to manufacture. Drawings were taken …

Therapeutic Mechanical Horse, Cade M. Liberty, Aleya Dolorfino, Peter Philips, Zuzanna Dominik, Luke Watts

Mechanical Engineering

Jack's Helping Hand and its hippotherapy participants required a device to serve as an alternative to a live horseback riding experience that could also increase the range of riders. This would provide more clients with equine-assisted therapy that has proven to better the lives of people with both physical and mental disabilities. Horses can be unpredictable, tall, and sometimes anxiety-inducing, especially for new riders. Our group’s aim was to develop a mechanical horse that will be able to reduce these issues for equine therapy centers and the riders they help. When a rider gets to practice sitting on the horse …

8 Dof Quadrupedal Hopping Robot, Clayton T. Elwell, John Bennett, Tyler Mccue, Daniel Munic

Mechanical Engineering

The goal of our senior project was to fabricate an eight degree of freedom (DOF) prototypical quadrupedal robot, develop a controller than commands the quadruped to repeatedly jump 10 cm in the air, and fabricate a modular test stand to safely deploy our controller on the quadruped. The creation of a functional quadruped will bring attention to Dr. Siyuan Xing and Charlie Refvem’s research group, Cal Poly Legged Robots, and will give future Cal Poly undergraduate and graduate students a learning tool to explore dynamic control of biomimetic robotic systems.

Over the course of our senior project, we successfully manufactured …

Interactive Lego Girl Scout Arm, Chris Suzuki, Emi Okuyama, Bryson Shores, Karina Sandoval

Mechanical Engineering

This Senior Project Report document outlines the senior design project for Girl Scouts of California’s Central Coast (GSCCC) led by a team of four Mechanical Engineering students at California Polytechnic State University, San Luis Obispo. The project encompasses the researching, designing, prototyping, and testing of a LEGO robotic arm for the Girl Scouts to learn more about STEM (Science, Technology, Engineering, and Mathematics) and provide support to each Girl Scouts cookie sales in their stores. Their goal was to build a LEGO robotic arm that will interact with customers at the Girl Scout stores and promote the girl scouts' interest …

Multifamily Complex Smart Locks For Property Management And Tenant Security, April Mills, Allen Chen, Dana Kumamoto, Michael Cook

Mechanical Engineering

Maintaining and managing hundreds of locks and physical keys for an apartment complex can be time consuming and costly, especially when the apartments turn over to new tenants. Our goal was to develop a smart door lock that is compatible with Obodo’s management app for apartment complexes to make accessing apartments secure and simpler for tenants and easier to manage for owners.

We designed and manufactured one smart door lock that is powered with four AA batteries and utilizes a dynamic NFC device and Bluetooth technology. The board can enter a sleep mode which reduces power consumption. The dynamic NFC …

Computational Modelling Of Resin Infiltration And Curing In High Pressure Resin Transfer Molding, Anthony Paul Rexford Sherratt

Electronic Thesis and Dissertation Repository

Increased pressure on automotive manufactures to reduce overall greenhouse gas emissions from their vehicles has driven research into replacing conventional steel components with carbon fiber reinforced plastics (CFRP). This is due to their high weight specific properties and design freedom. High pressure resin transfer molding (HP-RTM), a derivative of resin transfer molding, is a manufacturing process for CFRP’s that offers high automation potential and low cycle times; critical properties of a manufacturing process for the automotive sector.

The goal of the present work is to increase the accuracy and reduce the computational overhead of current RTM infiltration and curing models. …

Lattice Boltzmann-Based Sharp-Interface Schemes For Conjugate Heat And Mass Transfer And Diffuse-Interface Schemes For Dendritic Growth Modeling, Nanqiao Wang

Theses and Dissertations

Analyses of heat and mass transfer between different materials and phases are essential in numerous fundamental scientific problems and practical engineering applications, such as thermal and chemical transport in porous media, design of heat exchangers, dendritic growth during solidification, and thermal/mechanical analysis of additive manufacturing processes. In the numerical simulation, interface treatment can be further divided into sharp interface schemes and diffuse interface schemes according to the morphological features of the interface. This work focuses on the following subjects through computational studies: (1) critical evaluation of the various sharp interface schemes in the literature for conjugate heat and mass transfer …

Development And Evaluation Of Modeling Approaches For Extrusion-Based Additive Manufacturing Of Thermoplastics, Christopher C. Bock

Electronic Theses and Dissertations

This work focuses on evaluating different modeling approaches and model parameters for thermoplastic AM, with the goal of informing more efficient and effective modeling approaches. First, different modeling approaches were tested and compared to experiments. From this it was found that all three of the modeling approaches provide comparable results and provide similar results to experiments. Then one of the modeling approaches was tested on large scale geometries, and it was found that the model results matched experiments closely. Then the effect of different material properties was evaluated, this was done by performing a fractional factorial design of experiments where …

Understanding Thermal Comfort Impact And Air Movement Around Open Stairs Through The Use Of Cfd Modeling, Ethan Davidson

Graduate Theses and Dissertations

The air exchange between two floors of a building has an impact on thermal comfort. The present research attempts to quantify this impact and identify the contributing factors disrupting the thermal comfort on and around stairs. Various heating and cooling scenarios were analyzed, using CFD modeling, in a simple two-story building separated by a single staircase. The research examines a single building layout with a fixed inlet and outlet configuration. In addition, the study investigated the short-term impact on thermal comfort. As a result, the duration of the simulations varies from two and half minutes to ten minutes, consistent with …