Mechanical Engineering Commons^™

Respiratory Compensated Robot For Liver Cancer Treatment: Design, Fabrication, And Benchtop Characterization, Mishek Jair Musa

Graduate Theses and Dissertations

Hepatocellular carcinoma (HCC) is one of the leading causes of cancer-related death in the world. Radiofrequency ablation (RFA) is an effective method for treating tumors less than 5 cm. However, manually placing the RFA needle at the site of the tumor is challenging due to the complicated respiratory induced motion of the liver. This paper presents the design, fabrication, and benchtop characterization of a patient mounted, respiratory compensated robotic needle insertion platform to perform percutaneous needle interventions. The robotic platform consists of a 4-DoF dual-stage cartesian platform used to control the pose of a 1-DoF needle insertion module. The active …

2021 (Fall) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the fall of 2019.

Metasurface Cloaks To Decouple Closely Spaced Printed Dipole Antenna Arrays Fed By A Microstrip-To-Balanced Transmission-Line Transition, Doojin Lee, Alexander B. Yakovlev

Faculty and Student Publications

In this work, we present a numerical study of 1D and 2D closely spaced antenna arrays of microstrip dipole antennas covered by a metasurface in order to properly cloak and decouple the antenna arrays operating at neighboring frequencies. We show that the two strongly coupled arrays fed by a microstrip-to-balanced transmission-line transition are effectively decoupled in 1D and 2D array scenarios by covering the dipole antenna elements with an elliptically shaped metasurface. The metasurface comprises sub-wavelength periodic metallic strips printed on an elliptically shaped dielectric cover around the dipole antennas and integrated with the substrate. We present a practical design …

Helical Dielectric Elastomer Actuator, Daewon Kim

Publications

A helical dielectric elastomer actuator (HDEA) can include a first dielectric region comprising an elastomer defining a helix. In an example, a dielectric material can be deposited, and a compliant conductive material can be deposited, such as using an additive manufacturing approach, to provide an HDEA. In an example where the HDEA has multiple mechanical degrees of freedom, at least two compliant conductive regions can be located on a first surface of the first dielectric region and at least one compliant conductive region can be located on an opposite second surface of the first dielectric region. For such an example, …

Trend Significance Levels Of Rain Onset And Cessation And Lengths Of The Wet And Dry Seasons In Epe, Lagos State, Nigeria, Adekunle Adedeji Alli, Olorunwa Eric Omofunmi

Makara Journal of Technology

This study aims to reduce crop failure resulting from a dry spell, which is the first occurrence of unsustainable rainfall that deceives farmers into planting. Thus, trends need to be tested using hypothesis, kurtosis, and other statistics to analyze the risks associated with unstable planting calendars and their possible mitigation strategies. The daily rainfall data from 1982 to 2018 were obtained from the archive of NASA/POWER SRB/FLASH, and the research location is Epe, Lagos State, Nigeria, which lies at latitude 6.585° N and longitude 3.962° E. Microsoft Excel was used to perform the tests. Results show that the null hypothesis …

Improvement Of Electrical Properties Of Cmc-Pva Doped With Various Contents Of Lino3 As An Application For Hybrid Polymer Electrolytes, Amalia Zulkifli, Norfatihah Mazuki, Ahmad Salihin Samsudin

Makara Journal of Technology

The present work was carried out with the development of hybrid polymer electrolytes (HPEs) by using carboxymethyl cellulose (CMC)–polyvinyl alcohol (PVA) doped with different contents of lithium nitrate (LiNO3) for the determination of their structural and conduction properties. The structural analysis was conducted by using Fourier transform infra-red spectroscopy and showed the interaction between the blend host polymer and ionic dopant, which formed via the coordinating site of CMC-PVA and Li+-NO3−. The complexes of CMC-PVA doped LiNO3 led to an increment in ionic conductivity, as observed by electrical impedance spectroscopy, and the sample containing 20 wt% LiNO3 obtained the highest …

Comparison Of Concrete And Steel Jacket Methods For Reinforcing A Concrete Bridge Pier By Numerical And Experimental Studies, Hadi Faghihmaleki

Makara Journal of Technology

Various rehabilitation and strengthening procedures have been developed in recent decades. A study to determine which methods can be implemented to increase the useful life of the bridge before strengthening must be performed. In this study, the seismic behavior of a reinforced concrete bridge pier with dimension 3.5 × 3.5 m, which was reinforced by two steel and a concrete jacket, was investigated. Nonlinear geometric models and materials were analyzed to estimate the seismic parameters of the pier. Results show an increase in energy absorption, ultimate strength, and ductility for the steel jacket, as well as a greater increase in …

Effect Of Arc Plasma Sintering On The Structural And Microstructural Properties Of Fe-Cr-Ni Austenitic Stainless Steels, Parikin Parikin, M. Dani, A. Dimyati, N. D. Purnamasari, B. Sugeng, M. Panitra, A. Insani, T. H. Priyanto, S. Mustofa, Syahbuddin Syahbuddin, A. Huang

Makara Journal of Technology

X-ray diffraction techniques were performed to determine the actual crystal structure of A2 austenitic stainless steel (ASS) as-cast and A2 ASS after arc plasma sintering (APS) for 2 s. Computations were conducted on the basis of the Bragg arithmetic formula by comparing the S2 arithmetic with the interplanar spacing. The Bragg arithmetic formula is a simple series for the determination of the crystalline phase of materials based on the Miller indices of cubic shapes or other shapes. A2 ASS as-cast was identified to have a crystal structure of face-centered cubic with lattice parameter a = 3.58 Å. A similar crystal …

Music Information Retrieval Based On Active Frequency, Hardianto Wibowo, Wildan Suharso, Yufis Azhar, Galih Wasis Wicaksono, Agus Eko Minarno, Dani Harmanto

Makara Journal of Technology

Music is the art of combining frequencies. A balance of frequencies gives rise to a harmonious tone. Several features of music can be analyzed, and they include sociocultural background, lyrics, mood, tempo, rhythm, harmony, melody, timbre, and instrumentation. In this study, we use the frequency of instrumentation as a feature for classification because each instrument has a frequency range. To test this frequency range, we use five music genres and one music playing skill. The five genres are dangdut, electronic dance music (EDM), metal, pop/rock, and reggae. The music playing skill is acoustic. Active frequencies are tested using the k-nearest …

Kinetic Modeling Study Of Laminar Burning Velocity Of Gasoline–Ethanol–Methanol Blends At Elevated Temperature And Pressure, Ahmad Syihan Auzani, Cahyo Setyo Wibowo, Riesta Anggarani, Yulianto Sulistyo Nugroho, Bambang Sugiarto

Makara Journal of Technology

Gasoline–ethanol–methanol (GEM) blends have been considered to replace pure gasoline as spark ignition engine fuel. Their physical and chemical properties and performance and emission measurements from real engines have been reported previously. However, a fundamental study that can explain the unique results of GEM compared with those of pure gasoline is lacking. This study aims to compare the laminar burning velocity of GEM blends at different mixtures, equivalence ratios, temperatures, and pressures with that of pure gasoline. A laminar flame propagation model and reaction mechanisms from the literature were were for a numerical simulation. In this study, the chemical components …

Predictive Delivery Man Assignment Problem Using Deep Learning, Rahmadini Payla Juarsa, Taufik Djatna

Makara Journal of Technology

Dispatching is a critical part in current online shopping. It relates to how the delivery man assignment should minimize cost along with the service from a source to an end customer with an appropriate scheduled time. The problem arises as neither enough products to deliver nor delivery men are available for dispatch, resulting in suboptimal service and a waste of money. The study aimed to formulate the cost of restaurant dispatching for inducing a deep learning-based solution with the gated recurrent unit recurrent neural network to receive hourly order data and to engage the result for near feature delivery man …

Design And Simulation Of A Supervisory Control System For Hybrid Manufacturing, Michael Buckley

Masters Theses

The research teams of Dr. Bill Hamel, Dr. Bradley Jared and Dr. Tony Schmitz were tasked by the Office of Naval Research to create a hybrid manufacturing process for a reduced scale model of a naval ship propeller. The base structure of the propeller is created using Wire Arc Additive Manufacturing (WAAM), which is then scanned to compare created geometry to desired geometry. The propeller is then machined down to match the desired geometry. This process is iterated upon until the final product meets design tolerances. Due to the complex nature and numerous industrial machines used in the process, it …

Airborne Counter-Uncrewed Systems With Runtime Assurance Control, Isaac J. Seslar

Mechanical Engineering ETDs

This thesis develops a response to the increase in the availability of the commercially available uncrewed aerial systems and is dedicated to the detection, classification, and tracking required to successfully neutralize when determined malicious. A requirement of actively avoiding obstacles using runtime assurance is addressed and designed to keep the hardware safe in potentially dangerous situations. This work will elaborate on the several components the test bed is comprised of, specifically the hardware and software portions that successfully solve the problem. The software encompasses the simulation, the multiple algorithms required for the tracking, and the machine learning required for detection …

Computational Frameworks For Multi-Robot Cooperative 3d Printing And Planning, Laxmi Prasad Poudel

Graduate Theses and Dissertations

This dissertation proposes a novel cooperative 3D printing (C3DP) approach for multi-robot additive manufacturing (AM) and presents scheduling and planning strategies that enable multi-robot cooperation in the manufacturing environment. C3DP is the first step towards achieving the overarching goal of swarm manufacturing (SM). SM is a paradigm for distributed manufacturing that envisions networks of micro-factories, each of which employs thousands of mobile robots that can manufacture different products on demand. SM breaks down the complicated supply chain used to deliver a product from a large production facility from one part of the world to another. Instead, it establishes a network …

Interrelation Of Thermal Stimulation With Haptic Perception, Emotion, And Memory, Mehdi Hojatmadani

USF Tampa Graduate Theses and Dissertations

Haptics is an interdisciplinary field of science that deals with how humans perceive and respond to different sensory cues perceived through touch. Thermal haptics as a branch deals with how humans perceive the temperature sensation and respond to that. The process in which thermal perception occurs is well known to researchers. What seems missing in the literature is how temperature interacts or sometimes intervenes in other physiological and psychological aspects of our lives. In this research, a series of studies are presented where the main focus was how temperature and brain interact with each other to impede or enhance our …

Towards Semantic Integration Of Machine Vision Systems To Aid Manufacturing Event Understanding, Kaishu Xia, Clint Saidy, Max Kirkpatrick, Noble Anumbe, Amit Sheth, Ramy Harik

Publications

A manufacturing paradigm shift from conventional control pyramids to decentralized, service-oriented, and cyber-physical systems (CPSs) is taking place in today’s 4th industrial revolution. Generally accepted roles and implementation recipes of cyber systems are expected to be standardized in the future of manufacturing industry. The authors intend to develop a novel CPS-enabled control architecture that accommodates: (1) intelligent information systems involving domain knowledge, empirical model, and simulation; (2) fast and secured industrial communication networks; (3) cognitive automation by rapid signal analytics and machine learning (ML) based feature extraction; (4) interoperability between machine and human. Semantic integration of process indicators is fundamental …

Inventory Locating With Quuppa: The Design And Development Of A Real-Time Process Monitoring Web Application Solution, Dylan C. Moreland, Trevor J. Howell, John W. Takiff, Patrick S. Dillon, Theo E. Fritz, William K. Mcintyre

Industrial and Manufacturing Engineering

Viasat, Inc. requires precise inventory tracking at their production facility in San Diego, CA. Viasat has installed the Quuppa indoor real-time locating system (RTLS), which it uses to track the real-time position of high-value work-in-process items. In its current state, the system only displays in-the-moment location information, with no available functionality for storing historical data for review, analysis, or visualization. In addition, the data displayed is noisy and prone to significant random error. This paper provides an overview of RTLS methods and technologies, assesses alternative solutions to Viasat’s issue, demonstrates our RTLS integrated web app solution, analyzes its impact, and …

Adaptive Robotic Chassis (Arc): Robocrop A Smart Agricultural Robot Toolset, Steven Bucher, Krissy Ikeda, Brooke Broszus, Alejandro Gutierrez, Ariana Low

Interdisciplinary Design Senior Theses

RoboCrop is a payload system that attaches to an existing modular drivetrain to support the agriculture industry with their primary challenge of labor shortages. ARC: RoboCrop features three degrees of freedom as an XYZ Cartesian robot and is intended specifically for pruning strawberry flowers. The image bay camera attached to RoboCrop’s frame identifies the strawberry flowers, communicates their XYZ coordinates, and then the Cartesian robot moves to the desired locations. The snipping toolhead is interfaced at the bottom of the Z-stroke and performs the snipping process. RoboCrop has a proven success rate of at least 70% of flowers pruned in …

Development Of A Wearable Haptic Feedback Device For Upper Limb Prosthetics Through Sensory Substitution, Marco B.S. Gallone

Electronic Thesis and Dissertation Repository

Haptics can enable a direct communication pipeline between the artificial limb and the brain; adding haptic sensory feedback for prosthesis wearers is believed to improve operation without drawing too much of the user's attention. Through neuroplasticity, the brain can become more cognizant of the information delivered through the skin and may eventually interpret it as inherently as other natural senses. In this thesis, a wearable haptic feedback device (WHFD) is developed to communicate prosthesis sensory information. A 14-week, 6-stage, between subjects study was created to investigate the learning trajectory as participants were stimulated with haptic patterns conveying joint proprioception. 37 …

Fatigue Monitoring Through Wearable Sensors For Construction Workers, Srikanth Sagar Bangaru

LSU Doctoral Dissertations

About 40% of the US construction workforce experiences high-level fatigue, which leads to poor judgment, increased risk of injuries, a decrease in productivity, and a lower quality of work. Excessive fatigue from working in unpleasant working conditions, long working hours, or heavy workloads can aggravate fatigue's adverse effects, leading to work-related musculoskeletal disorders (WMSDs) and productivity loss. Therefore, it is essential to monitor fatigue to reduce the adverse effects and preventing long-term health problems. However, since fatigue demonstrates itself in several complex processes, there is no single standard measurement method for fatigue detection. This research aims to develop a system …

Utility Scale Building Energy Modeling And Climate Impacts, Brett C. Bass

Doctoral Dissertations

Energy consumption is steadily increasing year over year in the United States (US). Climate change and anthropogenically forced shifts in weather have a significant impact on energy use as well as the resilience of the built environment and the electric grid. With buildings accounting for about 40% of total energy use in the US, building energy modeling (BEM) at a large scale is critical. This work advances that effort in a number of ways. First, current BEM approaches, their ability to scale to large geographical areas, and global climate models are reviewed. Next, a methodology for large-scale BEM is illustrated, …

Automated Bottling Station - Packaging System, Lauren Nicole Zinzilieta

Honors College Theses

This report focuses on the packaging system used at the end of the FESTO bottling station that is located in EP 2355. The system will be made up of an x-y 300 mm x 300 mm gantry system, an Arduino, two micro-stepping stepper drivers, and two 152.4 mm (6 in) single acting cylinders with a 3D printed bracket attached to both. The gantry system will be located at the end of the conveyor belt and will be programmed to pick up three bottles at a time and then will move a specified number of steps in both the x and …

A Hyperelastic Porous Media Framework For Ionic Polymer-Metal Composites And Characterization Of Transduction Phenomena Via Dimensional Analysis And Nonlinear Regression, Zakai J. Olsen

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ionic polymer-metal composites (IPMC) are smart materials that exhibit large deformation in response to small applied voltages, and conversely generate detectable electrical signals in response to mechanical deformations. The study of IPMC materials is a rich field of research, and an interesting intersection of material science, electrochemistry, continuum mechanics, and thermodynamics. Due to their electromechanical and mechanoelectrical transduction capabilities, IPMCs find many applications in robotics, soft robotics, artificial muscles, and biomimetics. This study aims to investigate the dominating physical phenomena that underly the actuation and sensing behavior of IPMC materials. This analysis is made possible by developing a new, hyperelastic …

Project Blipper, Peter Jacobs, Preston Delaware, Ryan Foster

Senior Design Project For Engineers

This project was sponsored by Clorox to design and create an automatic bottle-unscrambling system for possible implementation at their bottling plant in Chile. The objective was to use a robotic arm to unscramble bottles from an incoming conveyor belt and place them upright on an outbound conveyor belt. Throughout the research, design, and testing of solutions for this project, several design alternatives were found for each discipline, and will be presented to Clorox so that they can make an informed decision for how and if they want to move forward with implementation of this project.

The project was split into …

Artificial Intelligence-Driven Remaining Useful Life Prediction Of A Machinery-A Review, Dvij Barot, Honey Sharma, Mahika Yadav, Pooja Kamat

Library Philosophy and Practice (e-journal)

The Remaining Useful Life of a machine is very useful statistical information for the operator and manufacturer. It provides a very clear perspective to the user how long the machine can be operated and if any faults are detected how can they be prevented and ultimately increase the Remaining Useful Life. If the operators are aware of the forthcoming issues of the machine the downtime caused in the inspection, part delivery and eventually replacing parts is significantly reduced.

The paper presents a study on the remaining useful life of machinery as it is an emerging technique, starting from the year …

Marine Robot Deployment And Control System, Nicky Castillo, Nick Ellis, Trent Kelsall, Matt Kiyama

Interdisciplinary Design Senior Theses

A full operations package for underwater research, including the mid-sized ROV Nautilus with a distributed control system, a topside graphical user interface (GUI), and a dedicated launch and recovery system (LARS), was developed to increase the operational efficiency of scientific exploration and experimentation missions through Santa Clara University’s (SCU’s) Robotics Systems Laboratory (RSL). Design of the mechanical subsystems on Nautilus added flexibility of usage and protection of components. The new GUI improved pilot control of Nautilus with an added heads-up display and easy access to sensor readouts. The simulated Nautilus altitude control system has an error of ±1% and a …

Project Shearwater Ground Effect Uav, Duncan Clark, Justin Cole, Zachary Karat, Aidan Nickels, Cole Wolfe

Interdisciplinary Design Senior Theses

The Shearwater unmanned aerial vehicle is a maritime fixed-wing drone that is designed to use ground effect force generated between the aircraft and a body of water to efficiently propel itself near the surface of a body of water. Shearwater features a virtual reality pilot interface and will act as a hybrid underwater vehicle that will eventually be able to operate both above and beneath the ocean’s surface. The Shearwater team developed existing design work to produce major subsystems that culminated in a flyable functioning prototype. An existing airframe was updated with working control surfaces tested in simulation and in …

The Modular Oceanic Autonomous Underwater Vehicle For Novel Actuation, Bryan Gilbertson, John Elstad, Matthew Holmes, Sean Even, Robert Percell, Andrew Kambe, Gregor Limstrom

Interdisciplinary Design Senior Theses

A low-drag, high endurance, and high efficiency Long Range Autonomous Underwater Vehicle is a desired asset to Santa Clara University to aid future underwater vehicle development efforts. Such an vehicle will demonstrate novel actuation methods and provide the on-campus Robotics Systems Laboratory with a modular prototype to aid research and academic efforts. In this paper, we document the construction of a low cost, modular, demonstration vehicle that satisfies the requirements for high-efficiency operation and modular interfaces. The completed vehicle features standard actuation abilities utilizing low-drag methods that qualify it for shallow water operation. Furthermore, the vehicle demonstrates the feasibility of …

Design Of Ac Microgrid Topology With Photovoltaic Uncertainties In A Rural Village, Vannak Vai

Makara Journal of Technology

Energy needs are increasing day by day, especially for developing countries, due to population growth and changing lifestyles. A suitable microgrid topology with renewable energy integration is considered to fulfill the people and society’s needs. This paper focuses on the design of AC microgrid topology for a nonelectrified village with the integration of PV uncertainties in both sitting and sizing. The development of an optimal algorithm based on the conductor use minimization and unbalanced load improvement is proposed. The shortest path is proposed to search for the minimum conductor use. Then, the algorithm for improving the unbalanced load with two …

Analysis Of Correlation And Mapping Of Chlorophyll-A Concentrations And Sea Surface Temperatures In Coastal Areas Based On Terra Modis Satellite Image Data, Hendrata Wibisana, Bangun Muljo Sukotjo, Umboro Lasminto

Makara Journal of Technology

Ecosystems in aquatic environments are distinct from ecosystems on land. Changes that occur in ecosystems in aquatic environments affect the lives of biota in these waters, including the fish used as a food source in fishing communities in coastal areas. This study aims to determine the role of remote sensing in mapping and analyzing the relationship between the parameters of sea surface temperature and chlorophyll-a concentrations on the coast. The correlation of sea surface temperature with chlorophyll-a concentrations is modeled via linear regression. An analysis of variance test is performed to establish the suitability of the temperature data for the …