Mechanical Engineering Commons^™

Design Of A Haptic Interface For Medical Applications Using Magneto-Rheological Fluid Based Actuators, Nima Najmaei

Electronic Thesis and Dissertation Repository

This thesis reports on the design, construction, and evaluation of a prototype two degrees-of-freedom (DOF) haptic interface, which takes advantage of Magneto-Rheological Fluid (MRF) based clutches for actuation. Haptic information provides important cues in teleoperated systems and enables the user to feel the interaction with a remote or virtual environment during teleoperation. The two main objectives in designing a haptic interface are stability and transparency. Indeed, deficiencies in these factors in haptics-enabled telerobotic systems has the introduction of haptics in medical environments where safety and reliability are prime considerations. An actuator with poor dynamics, high inertia, large size, and heavy …

Wingtip Dynamics Simulator, Eugene Fox, Nick Rodriguez, Steven Rieber

Mechanical Engineering

Raytheon is a defense contracting company with an electronic warfare division that is developing a radio frequency signal triangulation system. Part of the focus in improving this technology is the need for accurate and real time locational knowledge of the signal receivers, which are located at the tips of aircraft wings. Due to turbulence during flight, the fluttering motion of the wings alter the distance and angle relationships of the two receivers and add noise to the received signal data, which negatively affect the triangulation estimates. To mitigate this error caused by the wing flutter, Raytheon is developing a software …

Designing A Biomimetic Testing Platform For Actuators In A Series-Elastic Co-Contraction System, Ryan Tyler Schroeder

UNLV Theses, Dissertations, Professional Papers, and Capstones

Actuators determine the performance of robotic systems at the most intimate of levels. As a result, much work has been done to assess the performance of different actuator systems. However, biomimetics has not previously been utilized as a pretext for tuning a series elastic actuator system with the purpose of designing an empirical testing platform. Thus, an artificial muscle tendon system has been developed in order to assess the performance of two distinct actuator types: (1) direct current electromagnetic motors and (2) ultrasonic rotary piezoelectric motors. Because the design of the system takes advantage of biomimetic operating principles such as …

Ubot-7: The Design Of A Compliant Dexterous Mobile Manipulator, Jonathan Cummings

Masters Theses

This thesis presents the design of uBot-7, the latest version of a dexterous mobile manipulator. This platform has been iteratively developed to realize a high performance-to-cost dexterous whole body manipulator with respect to mobile manipulation. The semi-anthropomorphic design of the uBot is a demonstrated and functional research platform for developing advanced autonomous perception, manipulation, and mobility tasks. The goal of this work is to improve the uBot’s ability to sense and interact with its environment in order to increase the platforms capability to operate dexterously, through the incorporation of joint torque feedback, and safely, through the implementation of passive and …

Bio-Inspired Robotic Fish With Vision Based Target Tracking, Eric Anderson

Open Access Theses

The lionfish is an invasive species that out-competes and overcrowds native sh species along the eastern seaboard of the United States and down into the Caribbean. Lionfish populations are growing rapidly. Current methods of monitoring lionfish populations are costly and time intensive. A bio-inspired robotic fish was built to use as an autonomous lionfish tracking platform. Lionfish are tracked visually using an onboard processor. Five different computer vision methods for identification and tracking are proposed and discussed. These include: background subtraction, color tracking, mixture of Gaussian background subtraction, speeded up robust feature (SURF), and CamShift based tracking. Each of these …

Effects Of Hip And Ankle Moments On Running Stability: Simulation Of A Simplified Model, Rubin C. Cholera

Open Access Theses

In human running, the ankle, knee, and hip moments are known to play different roles to influence the dynamics of locomotion. A recent study of hip moments and several hip-based legged robots have revealed that hip actuation can significantly improve the stability of locomotion, whether controlled or uncontrolled. Ankle moments are expected to also significantly affect running stability, but in a different way than hip moments. Here we seek to advance the current theory of dynamic running and associated legged robots by determining how simple open-loop ankle moments could affect running stability. We simulate a dynamical model, and compare it …

Design And Analysis Of A Cable-Driven Test Apparatus For Flapping-Flight Research, Stephen J. Musick

Open Access Theses

The biology, physiology, kinematics, and aerodynamics of insect flight have been a longstanding fascination for biologists and engineers. The former three are easily obtained through the observation of the organic species. The latter though, is very difficult to study in this fashion. In many cases, aerodynamic forces and fluid-body interactions can be simulated with computational fluid dynamics; another option is to use dynamically-scaled, experimental set-ups to measure physically these values.

An archetypal, experimental set-up may include one or two scaled wings, where each wing is actuated to achieve upwards of three degrees of freedom. The three degrees of freedom correspond …

Development And Applications Of The Expanded Equivalent Fluid Method, Bharath Kumar Kandula

Dissertations

Ocean acoustics is the study of sound in the oceans. Electromagnetic waves attenuate rapidly in the water medium. Sound is the best means to transmit information underwater. Computational numerical simulations play an important role in ocean acoustics. Simulations of acoustic propagation in the oceans are challenging due to the complexities involved in the ocean environment. Different methods have been developed to simulate underwater sound propagation. The Parabolic-Equation (PE) method is the best choice in several ocean acoustic problems. In shallow water acoustic experiments, sound loses some of its energy when it interacts with the bottom. An equivalent fluid technique was …

Legacy Borehole Project, Maza Brady, Luke Cashman, Erin Hicks, Meghan Richey

Interdisciplinary Design Senior Theses

The Legacy Borehole Project is a three-year effort to design and build a sensor package that will be used to explore the geological and chemical conditions of the ocean floor. Over the course of three years, a mechanical structure and a robotic system will be constructed to lower sensors into previously drilled boreholes. As the team responsible for the development of the first year of this project, we have constructed a prototype sensor package and mock mechanical structure to test a communication interface between the sensors and a graphical user interface. The sensors were tested by lowering the sensor package …

Cnc Torch, Steven Chiu

Computer Engineering

This CNC Torch cuts steel plate. It can cut up to a maximum area of 3x3 feet. The user builds a cut list on the touchscreen from a selection of predefined shapes and enters the parameters need for each shape. When the user is ready, the cut list is sent to an Arduino that will move each motors accordingly to the shapes desired.

Automated Foosball Table, Jim R. Stefani, Alex J. Herpy, Brett Gordon Jaeger, Kevin S. Haydon, Derek Alan Hamel

Mechanical Engineering

This project is the second iteration of an automated foosball table for Yaskawa America as a trade show display. The table is meant to provide an interactive experience which highlights the speed and precision of the Yaskawa hardware. The first iteration of the project was mainly focused on creating the physical hardware for the system and to begin the basic programming for the system. This phase of the project was focused on finalizing the physical hardware of the system, implementing the vision system and to continue the basic programing of the system AI. A third team will be assigned to …

Modeling, Analysis, And Control Of A Mobile Robot For In Vivo Fluoroscopy Of Human Joints During Natural Movements, Matthew A. Young

Doctoral Dissertations

In this dissertation, the modeling, analysis and control of a multi-degree of freedom (mdof) robotic fluoroscope was investigated. A prototype robotic fluoroscope exists, and consists of a 3 dof mobile platform with two 2 dof Cartesian manipulators mounted symmetrically on opposite sides of the platform. One Cartesian manipulator positions the x-ray generator and the other Cartesian manipulator positions the x-ray imaging device. The robotic fluoroscope is used to x-ray skeletal joints of interest of human subjects performing natural movement activities. In order to collect the data, the Cartesian manipulators must keep the x-ray generation and imaging devices accurately aligned while …

Analysis Of A Dual Scissored-Pair,Variable-Speed, Control Moment Gyroscope Driven Spherical Robot, Richard Chase

Wayne State University Dissertations

The objective of this research is to compare barycenter offset based designs of spherical robots to control moment gyroscope (CMG) based designs in order to determine which approach is most effective. The first objective was to develop a list of current state of the art designs in order to gain an overall understanding of what the obstacles in this area of research were. The investigation showed that barycenter offset designs can produce a low, continuous output torque, whereas CMG based designs can usually only produce a high, momentary output torque. The second objective was to develop a CMG based design …

Use Of Pattern Classification Algorithms To Interpret Passive And Active Data Streams From A Walking-Speed Robotic Sensor Platform, Eric Allen Dieckman

Dissertations, Theses, and Masters Projects

In order to perform useful tasks for us, robots must have the ability to notice, recognize, and respond to objects and events in their environment. This requires the acquisition and synthesis of information from a variety of sensors. Here we investigate the performance of a number of sensor modalities in an unstructured outdoor environment, including the Microsoft Kinect, thermal infrared camera, and coffee can radar. Special attention is given to acoustic echolocation measurements of approaching vehicles, where an acoustic parametric array propagates an audible signal to the oncoming target and the Kinect microphone array records the reflected backscattered signal. Although …

Communication Protocol Design Considerations For Highway Vehicle Platoons And Enhanced Networked Robustness By Stochastic Dithers, Lijian Xu

Wayne State University Dissertations

Highway platooning of vehicles has been identified as a promising framework in

developing intelligent transportation systems. By autonomous or semi-autonomous

vehicle control and inter-vehicle coordination, an appropriately managed platoon can

potentially offer enhanced safety, improved highway utility, increased fuel economy,

and reduced emission. This thesis is focused on quantitative characterization of impact

of communication information structures and contents on platoon safety. By

comparing different information structures which combine front sensors, rear sensors,

and wireless communication channels, and different information contents such

as distances, speeds, and drivers' actions, we reveal a number of intrinsic relationships

between vehicle coordination and communications in …

Virtualized Welding Based Learning Of Human Welder Behaviors For Intelligent Robotic Welding, Yukang Liu

Theses and Dissertations--Electrical and Computer Engineering

Combining human welder (with intelligence and sensing versatility) and automated welding robots (with precision and consistency) can lead to next generation intelligent welding systems. In this dissertation intelligent welding robots are developed by process modeling / control method and learning the human welder behavior.

Weld penetration and 3D weld pool surface are first accurately controlled for an automated Gas Tungsten Arc Welding (GTAW) machine. Closed-form model predictive control (MPC) algorithm is derived for real-time welding applications. Skilled welder response to 3D weld pool surface by adjusting the welding current is then modeled using Adaptive Neuro-Fuzzy Inference System (ANFIS), and compared …

Neuromodulation Based Control Of Autonomous Robots On A Cloud Computing Platform, Cameron Muhammad

Electronic Theses and Dissertations

In recent years, the advancement of neurobiologically plausible models and computer networking has resulted in new ways of implementing control systems on robotic platforms. The work presents a control approach based on vertebrate neuromodulation and its implementation on autonomous robots in the open-source, open-access environment of robot operating system (ROS). A spiking neural network (SNN) is used to model the neuromodulatory function for generating context based behavioral responses of the robots to sensory input signals. The neural network incorporates three types of neurons- cholinergic and noradrenergic (ACh/NE) neurons for attention focusing and action selection, dopaminergic (DA) neurons for rewards- and …