Mechanical Engineering Commons^™

Poster Session: Onu Engineering Freshman And Senior Design Projects, Keith Schimmel

Scholar Week 2016 - present

This poster session is held Friday, April 19, 4:45-6:15pm, with food served, in the Reed Hall of Science Tech Center.

The capstone engineering senior design projects at Olivet Nazarene University involve interdisciplinary engineering teams completing real-life projects sponsored by companies, mission organizations, and professional society competitions. The engineering first-year design projects at Olivet Nazarene University involve interdisciplinary engineering teams proposing product improvement designs, using Computer Aided Design (CAD) software. Posters for both the senior and freshman engineering design projects will be presented during this poster session.

Education And Training Networks, Ken Thomas, Joe Harrington, Robin Stubbs, Sean Carroll, Emily Shakespeare, Rahat Ullah, Adhban Farea, Theresa-Marie Greiwe

Tools

Education And Training Networks Inventory is a review of relevant network in Ireland and the EU.

Theory Of Development And Improvement Of The Mathematical Model Of The Methodology Of Public Control In The Management Of Occupational Safety And Industrial Risks, Aliakbar Khamidullaevich Rasulev, Sunnatilla Suleymanovich Suleymanov, Nodira Bakhadirzhanovna Gaibnazarova

Technical science and innovation

The article develops and analyzes a mathematical model based on a logical flowchart of the methodology of public control in the management of occupational safety and industrial risks and probability theory, according to the model, the results of compliance with the requirements of social cooperation on occupational safety lead to a sharp increase in the probability of reliability, management efficiency becomes higher. Analysis of the mathematical model of the developed logical flowchart based on probability theory has shown that when the parties cooperate to monitor the results of compliance with labor protection requirements, they lead to a sharp increase in …

Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov

Technical science and innovation

In this article we will talk about the problems of water resources in the Republic of Uzbekistan. The problem of drinking water supply, solutions to provide drinking water to the population of Uzbekistan. The largest consumers of fresh water in Uzbekistan are farmers. Due to outdated infrastructure, 40% of water is wasted. Rising food prices and the risk of spreading disease are the first signs of water shortages that we may experience in the coming еars. Uzbekcosmos told how to solve the problem. Water is an invaluable resource used not only in the home, but also in the production and …

Selective Oxidation Of Iron In Chalcopyrite For Enhanced Copper Recovery, Khojiakbar Shuxrat O'G'Li Sultonov, Shokhrukh Toshpulatovich Khojiev, Gulnoza Berdiyor Qizi Beknazarova, Malika Sayfullayevna Saidova

Technical science and innovation

This study explores the thermodynamic feasibility of selectively oxidizing iron contained in chalcopyrite mineral while preventing the oxidation of copper sulphide, with the ultimate goal of enhancing the copper concentration in the sulphide concentrate. A redox reaction in the solid phases between chalcopyrite and copper (I) oxide was constructed and subjected to thermodynamic analysis. The research identifies a crucial temperature range of 498-598 K (225-325 °C) as the most favourable for the redox reaction. The equilibrium constants at the selected optimal temperatures, 1.152 for chalcopyrite and 1.137 for copper (I) oxide, indicate that the redox reaction adheres to the expected …

Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova

Technical science and innovation

This study is the prediction, depending on time and different geographical and climatic situations, of different operating parameters: solar radiation, ambient and outlet coolant temperature, heat exchange coefficients and losses. All these determine, in the absence of measurements, the efficiency of the system modelled with existing models with respect to these parameters. These models are usually compared with experimental results. Before modelling, it is necessary to investigate the different heat transfer and exchange regimes that exist between the different elements of this system in order to eventually have a system of equations governing this exchange. The modelling principle is to …

Implementing A Solar Photovoltaic Station In Watering Systems Utilizing Complex Software, Akbarxon Sarvar O'G'Li Uroqov, Faxriddin Jaylovovich Nosirov, G'Olibjon Pardayevich Arzikulov, Zarina Amriddin Qizi Sayfutdinova

Technical science and innovation

This article explores the benefits of transitioning from traditional agricultural irrigation systems to more cost-effective alternatives powered by renewable energy sources. By integrating solar photovoltaic technology into irrigation processes, significant reductions in resource wastage, estimated at 45-50%, are achievable through the implementation of drip irrigation techniques. This results in enhanced agricultural productivity. Moreover, the utilization of solar panels in green zones mitigates surface temperature increases, contributing to a 2-5% boost in electricity production. Currently, irrigation facilities primarily rely on the main energy grid. However, transitioning to renewable energy sources decreases reliance on non-renewable fuels, reduces greenhouse gas emissions, and fosters …

Research Of The Influence Of Dust On Photovoltaic Modules, Anvarjon Mirolimov, Xalmurat Iliev

Technical science and innovation

The influence of dust concentrations on the current-voltage characteristics (voltampere characteristics) of photovoltaic modules (PVM) based on crystalline silicon in laboratory conditions. It was investigated how an uncleaned panel affects the output power. The tests were carried out in the city of Tashkent on the territory of the “National Research Institute of Renewable Energy Sources”. The objects were located co-plurally as specified in GOST R 60904-1 Photoelectric devices. Part 1. Measurement of current-voltage characteristics. Measurements of a cleaned photovoltaic module with a maximum power of 330 W and not a cleaned one of 236 W were obtained. Based on the …

Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov

Technical science and innovation

In this paper, we review innovative approaches to assess the technical condition of autotransformers using mathematical methods. The main purpose of these methods is to increase the efficiency of diagnostics and prevent possible failures in power systems. The developed mathematical expression is based on complex data analysis, application of statistical methods and machine learning technologies. This makes it possible to achieve more accurate and earlier detection of potential problems. As a result of these innovative approaches, the possibilities for early detection and prevention of faults are significantly increased. This is important for ensuring the smooth operation of power systems and …

Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov

Technical science and innovation

This paper explores the quantitative assessment and characterization of tool wear phenomena in advanced manufacturing processes, employing a multifaceted approach encompassing traditional measurements, image processing, machine learning, and predictive modeling. The study emphasizes the intricate dynamics of tool wear and its direct impact on cutting tool performance, addressing challenges in real-time monitoring and optimization of machining operations. Traditional methods like VBmax measurement are juxtaposed with advanced techniques such as the improved conditional generative adversarial net with a high-quality optimization algorithm (CGAN-HQOA), efficient channel attention destruction and construction learning (ECADCL), and shape descriptors based on contour, moments, orientations, and texture. Artificial …

A Study On The Influence Of Cutting Parameters On Surface Roughness And Visualization Through Contour Plots And 3d Surface Profiles, Zayniddin Nosirovich Muxiddinov

Technical science and innovation

This research investigates the intricate relationship between cutting parameterscutting speed, feed rate, and depth of cut and surface roughness in machining processes. Surface roughness is a key determinant of machined surface quality, and optimizing cutting parameters is crucial for achieving superior finishes. Employing advanced visualization techniques, including contour plots and 3D surface profiles, the study offers a comprehensive exploration of surface topography dynamics. Statistical analyses and regression modeling enhance the quantitative understanding of how cutting parameters interact to shape surface roughness. The research affirms the significant influence of cutting speed, feed rate, and depth of cut, providing practical insights for …

Efficacy Of Passive Ventilation With High Exhaust Demands: A Case Study Of Cal Poly Sst, Siddarth Bokka

Construction Management

The Simpson Strong Tie Demonstration Laboratory serves as a multipurpose space allowing students at the College of Architecture and Environmental Design at California Polytechnic State University to build full scale construction projects. The building features a material storage area, a high bay for construction of full-scale projects, and a mezzanine level that houses digital fabrication equipment. However, the building was never designed to house the specific equipment currently installed on the mezzanine and ventilate the exhaust fumes from them. Rather, the building relies on passive natural ventilation that is likely ineffective at properly exhausting hazardous fumes, resulting in complaints from …

Analyses For Assessing The Centreline Translation, Asymmetrical Wind-Field, And Velocity Fluctuations Of Tornado Vortices, Niall C. Bannigan

Electronic Thesis and Dissertation Repository

Tornadoes present an ever-increasing threat to communities worldwide, especially those with geographic conditions that place them in the path of several tornadoes annually. These conditions are likely to be exacerbated by ongoing trends in the climate. As such, it is necessary to move towards experimental and numerical tornado-like vortex studies that allow for more advanced simulation methods. Novel techniques for tracking and analysing tornado vortices simulated at high spatial and temporal resolution are presented herein. Significant wandering of the tornado's position and large peaks in the velocity field can be captured, demonstrating tangential gusting at more than 1.5 times the …

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

Research On An Improved Cotton Cleaner Unit, Muzaffar Djurayev, Sherqul Hakimov, Ilhom Abbazov, Rashid Kaldybaev

Technical science and innovation

This article analyzes the results of changes to the working parts of a cotton cleaning unit from small and large impurities. It is known that the UXK installation uses continuous cleaning technology, that is, the cotton entering the purifier is cleaned in all its cleaning sections and then transferred to another process. In these sections, pieces of cotton wool from the separated waste are regenerated in a separate drum. Existing purifier suppliers use a manually operated mechanical system to monitor its performance. These factors do not make it possible to control the cleaning process when the quality indicators of cotton …

Mathematical Modeling Of Fruit Drying And System Analysis Of The Process (On The Example Of Persimmon), Gani Dadayev, Jasur Safarov, Shakhnoza Sultanova, Qobiljon Muxiddinov

Technical science and innovation

Vegetable raw materials, as an object of drying, are characterized by a large amount of water and a low content of dry substances. Vegetable raw materials have a capillary-porous structure. Food products contain both bound and free moisture at the same time. The removal of moisture from the material during drying depends on the total moisture content and the form of connection of moisture with the material. Adsorption and osmotic - bound moisture is retained at the interface of colloidal particles with the environment. Food products contain both bound and free moisture at the same time. The quantitative ratio between …

Improvement Of Convective Drying Equipment, A Ponasenko, Jasur Safarov, Shaxnoza Sultanova

Technical science and innovation

Drying of agricultural raw materials is an energy-consuming but integral process. Therefore, increasing the efficiency of drying and improving the quality indicators of dried material at minimum material and energy costs is relevant for producers of agricultural products. By present time numerous researches on improvement of constructions and processes of work of dryers providing satisfactory parameters of energy saving have been carried out. In some scientific materials it is shown that the use of generative gas and straw as fuel allows to reduce energy costs for the drying process in the fluidised bed dryer by 10-30%, the quality of seeds …

Capacitive Electrode Based Moisture Measurement Converter Errors And How To Eliminate Them, Hamdam Jabborov, Temurbek Rashidov

Technical science and innovation

The article discusses the errors associated with the moisture measuring transducer that is based on the cylindrical electrode, along with their sources and calculation formulas for error elimination. The initial capacitance of the capacitive electrode humidity converter is dependent on its geometric parameters, such as the radii of the electrodes and their length. Accurate calculation of these geometric parameters enables the reduction of regular measurement errors in the input and switching circuit of the moisture converter to a minimum value, resulting in a significant increase in the informativeness and accuracy of the output signal. Consequently, some sources of measurement errors …

Existing Methods For Monitoring Power Autotransformers, Nurali Berdiyorovich Pyrmatov, Dilafruz Rustamjon Qizi Abdullabekova

Technical science and innovation

autotransformers, methods, diagnostics, efficiency, monitoring.Particular attention is given to analyzing the gas composition of transformer oil, which is a sensitive indicator of various defects such as thermal breakdown and heating. In addition, methods based on the measurement of external magnetic field strength are discussed. This technique provides a unique opportunity to detect magnetic anomalies associated with possible defects in the structural components of the transformer. The article emphasizes that successful monitoring requires an integrated approach, combining different techniques. The authors analyze the advantages and limitations of each method and offer practical recommendations for integrating these methods into maintenance systems. In …

Influence Of Foil Stamping Parameters On Image Quality, Khalima Abishevna Babakhanova, Mukhlisa Ergashevna Khasanova, Aziz Azimjonovich Soadatov, Nigora Junaydullaevna Sadriddinova

Technical science and innovation

The paper evaluates the influence of technological process parameters, namely die temperature and pressure force, on the quality of foil stamping, which is one of the types of finishing having a wide range of applications due to giving unique decorative and protective elements to printed products. When evaluating the influence of process parameters on the linearity and coverability of the image, it was found that the pressure force has less influence on the result than the temperature. According to the data of the study, it can be concluded that the maximum percentage of completeness of covering is achieved at a …

Enhancing Bridge Resilience And Overheight Vehicle Mitigation Through Innovative Sacrificial Cushion Systems, Aly Mousaad Aly, Marc Hoffmann

Faculty Publications

Transportation departments have made significant strides in addressing the challenges posed by the increasing weights of trucks on bridges. While there is a growing awareness of overheight vehicle collisions with bridges, implementing effective countermeasures remains limited. The susceptibility of bridges to damage from such collisions is on the rise, further exacerbated by unpredictable lateral impact forces. This study employs nonlinear impact analysis to assess the response of an unprotected vehicle-girder model, yielding realistic deformation outcomes comparable to observed impacts on the US-61 bridge. Predictions for a truck traveling at 112.65 km/h indicate deformations of 0.229 m, 0.161 m, and 0.271 …

Railroad Condition Monitoring Using Distributed Acoustic Sensing And Deep Learning Techniques, Md Arifur Rahman

Electronic Theses and Dissertations

Proper condition monitoring has been a major issue among railroad administrations since it might cause catastrophic dilemmas that lead to fatalities or damage to the infrastructure. Although various aspects of train safety have been conducted by scholars, in-motion monitoring detection of defect occurrence, cause, and severity is still a big concern. Hence extensive studies are still required to enhance the accuracy of inspection methods for railroad condition monitoring (CM). Distributed acoustic sensing (DAS) has been recognized as a promising method because of its sensing capabilities over long distances and for massive structures. As DAS produces large datasets, algorithms for precise …

Simulation Of Wave Propagation In Granular Particles Using A Discrete Element Model, Syed Tahmid Hussan

Electronic Theses and Dissertations

The understanding of Bender Element mechanism and utilization of Particle Flow Code (PFC) to simulate the seismic wave behavior is important to test the dynamic behavior of soil particles. Both discrete and finite element methods can be used to simulate wave behavior. However, Discrete Element Method (DEM) is mostly suitable, as the micro scaled soil particle cannot be fully considered as continuous specimen like a piece of rod or aluminum. Recently DEM has been widely used to study mechanical properties of soils at particle level considering the particles as balls. This study represents a comparative analysis of Voigt and Best …