Mechanical Engineering Commons^™

Indicators Affecting Passenger Service Processes And Their Scientific Interpretation, Maxliyoxon Madaminova Maxamatjon Qizi, Saidazim Amanullayevich Ganihodjayev

Technical science and innovation

Many traffic flow parameters affect the performance of the road network at high voltage. These are low vehicle speeds, high vehicle distances relative to road capacity, and density per unit time (lane occupancy). In turn, a number of factors affect the decrease in traffic speed: the presence of slow-moving vehicles in the stream; pedestrians crossing the road irregularly; increase in traffic flow, etc. The issues of public transportation depend on many factors, each of which requires a separate approach and a complex solution. In large cities around the world, the quality indicators of public transport services, including the issues of …

Multi-Mode Regulation Of The Drying Process Of Industrial Gas, Isamidin Xakimovich Sidikov Pr, Nashvandova Gulruxsor Murot Qizi Phd

Technical science and innovation

Currently, much attention is paid to the issue of energy efficiency of gas processing enterprises. The continuous growth of world prices for energy resources requires constant improvement of the management system, providing the most optimal conditions for the flow of technological processes. A conceptual model of the heat-mass transfer process occurring in the absorber as an object of research has been developed, which characterizes the relationship of the variables involved in the drying process of natural gas, control, measurable and immeasurable, as well as controlled parameters have been selected, which are used to develop and study a mathematical model of …

The Interaction Of The Cotton Piece With The Piles Of The Scrabble Cotton Drum, Fazliddin Egamberdiev, Ilkhom Abbazov, Oybek Kholmuratov, Rashid Kaldybaev

Technical science and innovation

This article presents the results of an analytical study of the process of loosening and cleaning raw cotton from small debris by pileging working bodies of purifiers, on the basis of which directions for further research were chosen to optimize the parameters of the developed pile drum with spherical piles and rubber strips. Cotton entering production contains impurities. The processes of loosening and cleaning the fiber shreds are key in the initial stages of ginning, as they prepare the raw cotton for ginning and directly affect the reliability, productivity of these processes and the quality of the resulting fiber. Weed …

An Experimental Investigation Of The New Vibration Viscometer, Jamshidbek Ulugbek Ugli Shamuratov

Technical science and innovation

The characteristics of the new oscillating-plate viscometer have been investigated experimentally. The results obtained are as follows: the resonant frequency of plate oscillation decreases with increasing viscosity; the apparatus constant 𝐾 determined experimentally includes the end and slip effects; the dimensions of the plate should be determined by referring to empirical relations between 𝜌𝜇 and Λ(≡{(𝐸𝑎𝐸)−1}𝑛) for various dimensions of the plate; where 𝜌 is the density, 𝜇 is the viscosity; 𝐸𝑎 the resonant amplitude of plate in the air; E the amplitude of plate in a liquid, and 𝑛 a constant. If the distance between the plate and the …

Adaptation Algorithm For Self-Tuning Of Parameters Of Models Of Multi-Stage Flotation Processes, Nilufar Sharifzhanova, Maksadhan Yakubov, Francesco Gregoretti

Technical science and innovation

Modern methods for solving problems of planning the execution of batches of tasks in multi-stage systems are characterized by the presence of restrictions on their dimensionality, the impossibility of guaranteed obtaining better results in comparison with fixed packages for different values of the input parameters of the problem. In the article, the author solved the problem of optimizing the composition of job packages running in multi-stage systems using the branch and bound method. Research has been carried out on various ways to form package execution orders tasks in multi-stage systems (heuristic rules for ordering packages tasks in the sequence of …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Isolation And Characterization Of Caffeine-Degrading Bacteria From Coffee Plantation Areas In Malaysia, Elvina Clarie Dullah, Mohd Fazli Farida Asras

Makara Journal of Technology

Decaffeination by microbial degradation is currently the most optimal and low-cost approach, involving only microbial cells and/or their enzymes. The bacterium was characterized using a series of biochemical tests. Positive results were obtained from carbohydrate fermentation, citrate utilization, and catalase tests, while negative results were obtained from Voges-Proskauer (VP) and indole tests. Three different caffeine concentrations of 0.25%, 0.4%, and 2% were tested and measured through Gas Chromatography-Mass Spectrophotometry (GC-MS) analysis. The highest caffeine reduction (89.25%) was found when 0.25% caffeine was used in the media. Only a small amount of caffeine was reduced to 0.4% and 2%, with 34.78% …

Optimization Of The Building Envelope And Roof Shading To Reduce The Energy Consumption Of College Low-Rise Buildings In Indonesia, Nasruddin Nasruddin, Azimil Gani Alam, Mohammad Imroz Sohel

Makara Journal of Technology

Energy consumption in buildings is a crucial concern globally, prompting researchers to explore innovative solutions to mitigate its impact. This study investigates the optimization of building envelopes and roof shading systems of existing buildings in Indonesia to realize notable energy savings. Multiple scenarios were explored, with modifications to building envelopes and roof shading, highlighting the overall thermal transfer value as a key parameter. Using EnergyPlus simulations, the efficacy of natural ventilation in corridors and roof shading modifications was assessed in reducing energy consumption. The findings revealed that renovating existing buildings by optimization of the building envelope and roof shading by …

Stochastic Simulation Of Construction Methods For Multi-Purpose Utility Tunnels, Shayan Jorjam, Mohammed Mawlana, Amin Hammad

College of Architecture and the Built Environment Faculty Papers

The traditional method of installing underground utilities (e.g., water, sewer, gas pipes, electrical cables) by burying them under roads has been used for decades. However, the repeated excavations related to this method cause problems, such as traffic congestion and business disruption, which can significantly increase financial and social costs. Multi-purpose Utility Tunnels (MUTs) are a good alternative for buried utilities. Although the initial cost of MUTs is higher than that of the traditional method, social cost savings make them more feasible, especially in dense urban areas. Different factors, such as the specifications of utilities, the location of the MUTs, and …

Modeling Of Asphalt Concrete For Cross-Anisotropic Visco-Elasticity And Heterogeneity, Zafrul Hakim Khan

Civil Engineering ETDs

Asphalt Concrete (AC) is a cross-anisotropic viscoelastic material. This study has developed a methodology to backcalculate the cross-anisotropic properties of the AC layer from the Falling Weight Deflectometer (FWD) sensor and pavement response data from embedded sensors inside a pavement section. This study has also developed a two-way coupled Multiscale Finite Element Model (MsFEM) with Phase Field Fracture (PFF) to study the microstructural heterogeneity and damage of the AC layer based on the actual field loadings. A Finite Difference Time Domain (FDTD) and Machine learning-based backcalculation algorithm were developed to determine the layer thickness and dielectric constant from air-coupled Ground …

Study Of Multi-Dimensional Transfer Effects In Applied Smouldering Systems, Seyed Ziaedin Miry Mr

Electronic Thesis and Dissertation Repository

Smouldering is a flameless form of combustion that is driven by oxygen directly diffusing into the surface of condensed phase fuel (liquid or solid) and involves a complex interplay between heat and mass transfer through porous media, chemical reactions, and multiphase flow. Applied smouldering systems have been gaining popularity for a variety of applications including (i) energy and resource recovery, (ii) waste-to-energy, (iii) pyrolysis and gasification, and (iv) applied smouldering of organic liquids/solids for environmental benefits. In all contexts, smouldering is a complicated oxygen-limited phenomenon where multi-dimensional transfer effects (i.e., non-uniformities in …

Effects Of Perforations On Internal Cathodic Protection And Recruitment Of Marine Organisms To Steel Pipes, Alexander John Paluzzi

Theses and Dissertations

Steel monopile support structures for offshore wind turbines require protection from corrosion on their external and internal surfaces. Cathodic protection (CP) works effectively to protect the external surfaces of monopiles, but internally, byproducts from aluminum sacrificial anode CP (SACP) and impressed current CP (ICCP) induce acidification that accelerates steel corrosion. This project investigated the effects of perforations on the performance of aluminum SACP and ICCP when used inside of steel pipes. Additionally, marine growth on the external and internal surfaces of the pipes was assessed to determine if CP byproducts affect marine organism development.

Two sealed and two perforated steel …

Modular Composite Sandwich Structures For Thermal And Structural Retrofitting Of Existing Buildings, Marc Al Ghazal

Masters Theses

Around 40% of global energy consumption and 30% of worldwide carbon dioxide (CO2) emissions are attributed to buildings. Most of this consumption is dedicated to ensuring thermal comfort. The goal of this research was to develop and field validate retrofit solutions to improve the energy efficiency of buildings. Exterior cladding panels were designed and tested to ensure adequate thermal and structural performance. Sandwich panels (glass fibers reinforced polymer (GFRP) skins and polymeric foam cores) were fabricated using the vacuum assisted resin transfer molding (VARTM) process. Extruded polystyrene (XPS) and polyurethane (PU) foams were compared as core materials through a series …

The Effects Of Engineering Summer Camps On Middle And High School Students’ Engineering Interest And Identity Formation: A Multi-Methods Study, Timothy Robinson, Adam Kirn, Jenny Amos, Indira Chatterjee

Journal of Pre-College Engineering Education Research (J-PEER)

This multi-methods study explores changes in engineering interest and identity of middle and high school students (n = 79) attending introductory-level engineering summer camps at a large western land grant university. Middle school is a critical time when student interest, identity, and subsequently career choice begin to emerge and hence it is important that at this age students are given accurate information about engineering majors in college and future career opportunities in engineering. Data were collected over a period of two years in six summer camps. Three separate populations of middle and high school students participated in the summer …

Ai-Based Bridge And Road Inspection Framework Using Drones, Hovannes Kulhandjian

Mineta Transportation Institute

There are over 590,000 bridges dispersed across the roadway network that stretches across the United States alone. Each bridge with a length of 20 feet or greater must be inspected at least once every 24 months, according to the Federal Highway Act (FHWA) of 1968. This research developed an artificial intelligence (AI)-based framework for bridge and road inspection using drones with multiple sensors collecting capabilities. It is not sufficient to conduct inspections of bridges and roads using cameras alone, so the research team utilized an infrared (IR) camera along with a high-resolution optical camera. In many instances, the IR camera …

Onshore Power For The Docked Container Vessels In Apapa Port Through Blended Finance, Oladayo Matthew Atilola

World Maritime University Dissertations

No abstract provided.

Potential Roles Of Vessel Traffic Services (Vts) In Maritime Decarbonization, Suleiman Mustapha Bunza

World Maritime University Dissertations

No abstract provided.

Evaluation Of Digital Twin Approaches For Thermal Modeling And Energy Optimization For Existing Buildings, Jason Bastie Muermann

Theses and Dissertations

Residential, commercial, and industrial building sectors in the United States were responsible for 42% of the nation’s consumption of 100.2 quadrillion BTUs of energy in 2019 [1]. 80% of the nation’s energy is sourced from fossil fuels, including coal, natural gas, and petroleum. Fossil fuels are known contributors to carbon emissions and climate change, making energy reduction vital. Consequently, New Jersey Department of Military and Veterans Affairs (NJDMAVA) is tasked with evaluating energy consumption and efficiency in all New Jersey Army National Guard (NJARNG) facilities, as mandated by TAG Policy Letter 18-5, Executive Order 13990, and the Energy Independence and …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

Investigating The Effect Of Bead Geometry On Fiber Orientation And Thermomechanical Properties For Large-Format Extrusion-Based Additive Manufacturing, Joanna F. Keaton

Electronic Theses and Dissertations

In large-format extrusion-based additive manufacturing of polymer composites, the relationship between material properties and processing parameters requires further investigation. This thesis focuses on the relationship between fiber orientation and thermomechanical properties for short fiber-filled thermoplastic polymer systems manufactured by extrusion-based additive manufacturing. Fiber orientation is particularly important in determining the thermomechanical properties of the composite material as properties in the direction of deposition are expected to be higher for highly aligned fibers than randomly aligned fibers. Fiber orientation distribution, which is related to processing parameters and deposition conditions, can be efficiently represented by the orientation tensor. The orientation tensor can …

The Effects Of Hurricane Wind Field Characteristics On Wind Blade Loads, Michael S. Tsai

Masters Theses

Over recent years, offshore wind energy has been growing around the world. This necessitates placing wind turbines directly in or near the oceans where hurricanes can be. Previous research has suggested that hurricane wind veer and direction change can have adverse loading effects on the turbine. Such effects can create damage to the blade or worsen existing ones. Currently, there is no known design standard for addressing wind veer and direction change specifically from hurricanes. Quantifying the loading contribution from these phenomena is not abundant either.

This thesis seeks to demonstrate a proposed procedure for defining design veer profiles and …

Vibration Fatigue Of Leaded Solder Joint Interconnects For Pcb Electronics, John Crowder

All Theses

With the increasing prevalence of electronic equipment worldwide, there is also a decrease in the size of the components on their printed circuit boards (PCBs), leading to an increase in the density of these components. A significant amount of failure in electronic equipment is vibration fatigue of solder joints and their attachments. However, the complexity of these PCBs and their components has made finite element modeling (FEM) more complex, adding considerable time to create and analyze a model.

This paper aims to provide a literature review for the vibration fatigue of leaded solder components, create a test setup, and validate …

Water Hammer Analysis For Ash Slurry Disposal Pipelines Of A Thermal Power System, Biprodip Mukherjee, Subhasish Das, Satyapriya Mandal

Journal of Environmental Science and Sustainable Development

Coal-ash slurry transportation via pipelines has been accepted as a potential, economical, and dependable mode of two-phase flow of solid-liquid transportation. It is solid-liquid transportation where the ash slurry generally flows through mild steel, and a good amount of pump energy and pressure is required to convey the slurry with a density above 1220 kg/m3. The study is basically on the water hammer analysis of ash slurry conveying pipes. Nevertheless, since the hammer analysis is typically carried out in normal water, the study of ash slurry is compared to the know criteria of potable water. The study aims to understand …

Aeroponic System Optimization For Butterhead Lettuce Growth And Future Sustainability Using Flow Blurring Atomization, Taylor J. Johnson

Doctoral Dissertations and Master's Theses

The global population has grown by 6 billion people over the last century and is trending toward 9.7 billion people by the year 2050. Agriculture accounts for 70% of global fresh water usage. Technology must be developed to accommodate the increase of food production demanded by the growing global population and the subsequent increase in water usage. Aeroponic technology is a water-efficient vertical farming technology that can reduce water usage by 90% by suspending plant roots in air within a controlled chamber and supplying atomized droplets of a water-nutrient solution directly to the roots.

This study simultaneously tests six droplet …

Developing And Testing Low-Cost Air Cleaners For Safer Spaces During Wildfires, Brett William Stinson

Dissertations and Theses

Air cleaning reduces indoor exposure to fine particulate matter (PM_2.5) during wildfire events. However, resource and cost restraints may limit access to air cleaning during such an event, as both commercial devices and the high-rated MERV filters that homemade assemblies typically rely upon tend to be expensive and in short supply. With these barriers in mind, we sought to develop and evaluate the potential for air cleaners that use common household fabrics as filtration media. Evaluated designs use a box fan to move air across fabric filters; box fans are inexpensive and readily available to many households. Ultimately, …

Empowering Student Success: Unlocking The Potential Of Project-Based Steel Design Education, Aly Mousaad Aly

Faculty Publications

In the pursuit of student success, it is essential to acknowledge that a singular teaching style does not universally cater to all students. The educator's crucial role lies in creating an optimal learning environment that fosters students' endeavors to excel. This endeavor transcends mere classroom success or employment prospects, encompassing a broader impact on societal well-being. An experiential learning approach, where students actively engage in practical tasks, emerges as the most effective mode of instruction. Integrating project-based learning activities into the curriculum holds immense potential for enhancing student learning. Additionally, the utilization of analysis software tools like FTool and STAAD …

A High-Speed Portable Ground Heat Exchanger Model For Use In Various Energy Simulation Software, Ryan Davies, Matt Mitchell, Edwin Lee

Macalester Journal of Physics and Astronomy

A portable component model (PCM) of a ground source heat pump system was developed and used as a test case in the creating of a PCM development framework. By developing this framework, new building energy simulation models will be able to be easily integrated into existing simulation software such as EnergyPlus and the Modelica Buildings Library. Our model uses a time responsive g-function and numerical methods to simulate ground source heat pumps for single time steps as well as long time scales. We validated our model against GHESim and GLHEPro and found that our model agrees with these two standards …

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Optimal Domain-Partitioning Algorithm For Real-Life Transportation Networks And Finite Element Meshes, Jimesh Bhagatji, Sharanabasaweshwara Asundi, Eric Thompson, Duc T. Nguyen

Civil & Environmental Engineering Faculty Publications

For large-scale engineering problems, it has been generally accepted that domain-partitioning algorithms are highly desirable for general-purpose finite element analysis (FEA). This paper presents a heuristic numerical algorithm that can efficiently partition any transportation network (or any finite element mesh) into a specified number of subdomains (usually depending on the number of parallel processors available on a computer), which will result in “minimising the total number of system BOUNDARY nodes” (as a primary criterion) and achieve “balancing work loads” amongst the subdomains (as a secondary criterion). The proposed seven-step heuristic algorithm (with enhancement features) is based on engineering common sense …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …