Mechanical Engineering Commons^™

College Of Engineering Senior Design Competition Fall 2006, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Reliability-Based Optimization Of Fiber-Reinforced Polymer Composite Bridge Deck Panels, Michel D. Thompson, Christopher D. Eamon, Masoud Rais-Rohani

Civil and Environmental Engineering Faculty Research Publications

A reliability-based optimization (RBO) procedure is developed and applied to minimize the weight of eight fiber-reinforced polymer composite bridge deck panel configurations. The method utilizes interlinked finite element, optimization, and reliability analysis procedures to solve the weight minimization problem with a deterministic strength constraint and two probabilistic deflection constraints. Panels are composed of an upper face plate, lower face plate, and a grid of interior stiffeners. Different panel depths and stiffener layouts are considered. Sensitivity analyses are conducted to identify significant design and random variables. Optimization design variables are panel component ply thicknesses while random variables include load and material …

Magnetic Field Effects On Caco3 Precipitation Process In Hard Water, Nelson Saksono, Setijo Bismo, Elsa Krisanti, Azwar Manaf, Roekmijati Widaningrum

Makara Journal of Technology

Magnetic Field Effects on CaCO3 Precipitation Process in Hard Water. Magnetic treatment is applied as physical water treatment for scale prevention especially CaCO3, from hard water in piping equipment by reducing its hardness. Na2CO3 and CaCl2 solution sample was used in to investigate the magnetic fields influence on the formation of particle of CaCO3. By changing the strength of magnetic fields, exposure time and concentration of samples solution, this study presents quantitative results of total scale deposit, total precipitated CaCO3 and morphology of the deposit. This research was run by comparing magnetically and non-magnetically treated samples. The results showed an …

Biogasoline Production From Palm Oil Via Catalytic Hydrocracking Over Gamma-Alumina Catalyst, Anondho Wijanarko, Dadi Ahmad Mawardi, Mohammad Nasikin

Makara Journal of Technology

Biogasoline Production from Palm Oil Via Catalytic Hydrocracking over Gamma-Alumina Catalyst. Bio gasoline conversion from palm oil is an alternative energy resources method which can be substituted fossil fuel base energy utilization. Previous research resulted that palm oil can be converted into hydrocarbon by catalytic cracking reaction with γ-alumina catalyst. In this research, catalytic cracking reaction of palm oil by γ-alumina catalyst is done in a stirrer batch reactor with the oil/catalyst weight ratio variation of 100:1, 75:1, and 50:1; at suhue variation of 260 to 340oC and reaction time variation of 1 to 2 hour. Post cracking reaction, bio …

Determination Of Operation Condition And Product Dimension Accuracy Optimization Of Filament Deposition Modelling On Layer Manufacturing Application, Slamet A. Widyanto, Alva Edy Tontowi, Jamasri Jamasri, Heru Santoso Budi Rochardjo

Makara Journal of Technology

Layer manufacturing process has proven as a process that can produce a high complexity mechanical part. Now, Improvement of LM methods continuously conduct that is aimed to increase precessions and efficiency of these processes. Pressure filament deposition modelling is a form of layer manufacturing process that is designed to produce a plastic part with controlling its semisolid phase. In this research, the equipment of filament depositor is designed and tested to make the product filament deposition. With operation condition observation, the optimal temperature and pressure of deposition process was determined. These experiments used PVC as crystalline material and polypropylene as …

A Study On Parallel Computation Tools On Networked Pcs, Heru Suhartanto

Makara Journal of Technology

A Study on Parallel Computation Tools on Networked PCs. Many models for natural phenomena, engineering applications and industries need powerfull computing resources to solve their problems. High Performance Computing resources were introduced by many researchers. This comes in the form of Supercomputers and with operating systems and tools for development such as parallel compiler and its library. However, these resources are expensive for the investation and maintenance, hence people need some alternatives. Many people then introduced parallel distributed computing by using available computing resource such as PCs. Each of these PCs is treated as a processors, hence the cluster of …

Segmental Sinusoidal Model For Speech Signal Coding, Florentinus Budi Setiawan, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro

Makara Journal of Technology

Segmental Sinusoidal Model for Speech Signal Coding. Periodic signal can be decomposed by sinusoidal component with Fourier series. With this characteristic, it can be modeled referring by sinusoidal form. By the sinusoidal model, signal can be quantized in order to encode the speech signal at the lower rate. The recent sinusoidal method is implemented in speech coding. By using this method, a block of the speech signal with 20 ms to 30 ms width is coded based on Fourier series coefficients. The new method proposed is quantization and reconstruction of speech signal by the segmental sinusoidal model. A segment is …

Stress Corrosion Cracking Behavior Of Stainless Steel 304 In The Sulfuric Acid Environment Due To Prestrain, Mohammad Badaruddin, Ahmad Suudi, Arinal Hamni

Makara Journal of Technology

Stress Corrosion Cracking Behavior of Stainless Steel 304 in the Sulfuric Acid Environment Due to Prestrain. The aim of research is to investigate the effect of prestrain on the stress corossion cracking behavior of AISI 304 stainless steel in the sulfuric acid of 10% concentration under the static cantilever loading according to ASTM E-1681 standart. The specimen of 304 Stainless steel was strain up over the yield strength until reaching the uniform strain of 5% and 10% using servopulser UTM 9506 under the displacement control of 0,3 mm/sec. The results of test show that the prestrain of 5% specimen is …

Crude Oil Sludge Degradation In Microcosmic Scale: Simple Simulation As Preliminary Study On Land Treatment Bioremediation., Astri Nugroho

Makara Journal of Technology

Crude Oil Sludge Degradation in Microcosmic Scale: Simple Simulation as Preliminary Study on Land Treatment Bioremediation. A study in microcosmic condition has been carried out to evaluate the bacterial hydrocarbonoclastic capability in increasing the oil sludge degradation being mixed with NPK fertilizer as nitrogen resources. Aerobic test was carried out by putting erlenmeyers in a shaker incubator, 120 rpm shaking speed, at 50°C temperature. While 150 days in microcosmic one observation showed that the consortium has the potential to grow up to 50% (v/v) sludge oil load. Maximum growth and maximum growth rate of the consortium occurred in the III …

Towards A New Taxation System For Motor Vehicles, Theodoros Zachariadis

Theodoros Zachariadis

No abstract provided.

Ole Miss Engineer 2006

Ole Miss Engineer

No abstract provided.

Contractor Variability In Construction Of Cement Treated Base Layers, Maile Anne Rogers

Theses and Dissertations

The primary purposes of this research were to identify construction factors most correlated to specific mechanical properties of cement-treated base (CTB) layers and to determine which construction factors exhibit comparatively high variability within individual construction sections of the two pavement reconstruction projects included in this study. In addition, differences between construction sections tested in this research were evaluated. The research focused on the construction of CTB layers in two pavement reconstruction projects in northern Utah, one along Interstate 84 (I-84) near Morgan and one along U.S. Highway 91 (US-91) near Richmond. The significant predictor variables associated with California bearing ratio …

A Solution For Commodity Field Hauling With Self-Unloading Semi-Trailers, Lee Pagens Wilkerson

Theses and Dissertations

Commodity hauling of bulk goods is a growing enterprise that has expanded from hauling agricultural products to hauling many other bulk products. Commodity trailers are used to haul agricultural products from storage facilities to processing plants. These trailers are designed for highway use but are frequently required to work in field conditions as well. In many cases this environment overstresses these trailers and results in permanent irreparable damage. In addition to the structural problems of these trailers, the current systems for unloading the bulk produce from these trailers have serious inadequacies. While functional, the currently used chain and non-chain driven …

College Of Engineering Senior Design Competition Spring 2006, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

2nd Annual Undergraduate Research Conference Abstract Book, University Of Missouri--Rolla

Undergraduate Research Conference at Missouri S&T

No abstract provided.

Effect Of Firing Temperature And Holding Time On Characterization Of Al/Sic Metal Matrix Composites Produced By Pressureless Infiltration., Anne Zulfia, Myrna Ariati

Makara Journal of Technology

Effect of Firing Temperature and Holding Time on Characterization of Al/SiC Metal Matrix Composites Produced by Pressureless Infiltration. The production of Al-SiC metal matrix composite can be carried out by pressureless metal infiltration processs (PRIMEX). The experiment was conducted using aluminium AC2B ingot as a matrix and 50%Vf SiC powder as a reinforcement which is mixed with 10% Mg powder for wetting agent. The variables of this experiment are holding time and firing temperature to investigate the effect of these conditions on mechanical properties of Al-SiC metal matrix composites. Holding time was conducted for 2,5,8,10,12 hours and firing temperatures was …

On The Performance Of Imt-2000 Communication Link Based On Stratospheric Platforms, Iskandar Iskandar, Shigeru Shimamoto

Makara Journal of Technology

A new means for providing wireless communication has been currently proposed. It is based on aerial vehicle known as High Altitude Platform or Stratospheric Platforms (SPF). The SPF will be operated at an altitude of 17-22 km above the ground. Therefore, the channel condition may be different compared with those of the conventional terrestrial or satellite wireless channel. In this paper, the channel propagation characteristic of such a system is firstly investigated by means of ray tracing algorithm. We emphasize our investigation in a typical urban environment, in which the mobile users mostly exist. We developed building block model for …

Ole Miss Engineer 2006

Ole Miss Engineer

No abstract provided.

Development Of Fiber-Optic Humidity Sensor Probe With Gelatin Cladding, Akhiruddin Maddu, Kun Modjahidin, Sar Sardy, Hamdani Zain

Makara Journal of Technology

Development of Fiber-Optic Humidity Sensor Probe with Gelatin Cladding. Humidity sensor based on optical fiber with gelatin cladding has been developed. In this humidity sensor probe, the origin cladding of optical fiber is replaced by gelatin coating as humidity sensitive cladding. Testing of the optical fiber sensor probe was conducted by measuring of light intensity transmitted on the optical fiber probe for each variation of different humidity treatments. Response of the optical fiber sensor probe measured from 42%RH to 99%RH, the results show an optical transmission curve varied with relative humidity (RH). Optical transmission in the optical fiber probe increase …

Analysis Of Technical Energy Losses By Using Simulation, Betrianis Betrianis, Randite Herawan

Makara Journal of Technology

Model is a representation of a system. Through model, it can be easier to forecast and control the changing of each element system. Electricity distribution is also a system. Losses are general problem that exist in a distribution network system. But with the right methods, specifically technical energy losses can be reduced in order to increase the efficiency. By making model of the distribution network, the value of technical energy losses in the whole network as well as in every line can be observed. Simulation can also be used to see all losses reduction alternatives. By comparing results from each …

Modification Of Bonding Strength Test Of Wc Hvof Thermal Spray Coating On Rocket Nozzle, Bondan T. Sofyan, Haposan J. Pardede, Marizki Stefano, Edi Sofyan

Makara Journal of Technology

Modification of Bonding Strength Test of WC HVOF Thermal Spray Coating on Rocket Nozzle. One way to reduce structural weight of RX-100 rocket is by modifying the nozzle material and processing. Nozzle is the main target in weight reduction due to the fact that it contributes 30 % to the total weight of the structur. An alternative for this is by substitution of massive graphite, which is currently used as thermal protector in the nozzle, with thin layer of HVOF (High Velocity Oxy-Fuel) thermal spray layer. This paper presents the characterization of nozzle base material as well as the modification …

Modeling Of Coupled-Tank System Using Fuzzy Takagi-Sugeno Model, Aries Subiantoro

Makara Journal of Technology

Modeling of Coupled-Tank System Using Fuzzy Takagi-Sugeno Model. This paper describes modeling of coupledtank system based on data measurement using fuzzy Takagi-Sugeno model. The fuzzy clustering method of Gustafson- Kessel algorithm is used to classify input-output data into several clusters based on distance similarity of a member of input-output data from center of cluster. The formed clusters are projected orthonormally into each linguistic variables of premise part to determine membership function of fuzzy Takagi-Sugeno model. By estimating data in each cluster, the consequent parameters of fuzzy Takagi-Sugeno model are calculated using weighted least-squares method. The resulted fuzzy Takagi-Sugeno model is …

Design Of Induction Motor Drive Without Velocity Sensor Using Current Vector Controller With Full And Reduced Observer Moving To Dq Axis, Ridwan Gunawan, Feri Yusivar, Wahidin Wahab, Zuhal A. Kadir

Makara Journal of Technology

Design of Induction Motor Drive Without Velocity Sensor Using Current Vector Controller with Full and Reduced Observer Moving to DQ Axis. The observer is used in estimation velocity sensor usually in α-β axis, therefore this situation will need an extra transformation when we want to add compensator because the flux model is in direct and quadrature-axis dq. Every used the transformation to make possible emerge an error. So in this simulation is used a method to estimate the velocity of induction motor drive with observer that is moved to dq-axis. The model of actual motor used is in alfa-beta axis, …

Hybrid Identification System With Arx And Fast Fourier Transform In Application Of A Quarter Of Vehicle Half Active Suspension, Noveri Lysbetti M, Antonius R.

Makara Journal of Technology

Hybrid Identification System with ARX and Fast Fourier Transform in Application of a Quarter of Vehicle Half Active Suspension. In a control system problem, identification system mechanism is a absolute thing, especially in adaptation controlling to disturbance changing. For that case, is needed an identification method which can identify the changing of disturbance in that system. The aim of this research is to give an alternative in system/plant identification which is a combination (hybrid) of ARX and Fast Fourier Transform. So, it is needed an algorithm design for identification process. In this case, the designed algorithm will be implemented in …

Automated Manipulation For The Lotus Filament Winding Process, Jeffrey V. Anderson

Theses and Dissertations

The filament-winding process produces quality consistent composite parts for many industries. Filament winding allows for consistent quality parts by automating the winding process. A recent development of filament winding is the Lotus process. The Lotus process reverses conventional filament winding by leaving the mandrel stationary and winding composite fiber around the mandrel. The automated Lotus filament-winding machine is controlled by four-axis control manipulating the Lotus ring around a fixed mandrel. This allows Lotus filament winding to wind parts that do not have a linear axis. Lotus filament winding is in its early stages of development. As a second step in …

Economic And Energy Aspects Of Motor Vehicle Taxation, Theodoros Zachariadis, Nadia Nicolaidou

Theodoros Zachariadis

No abstract provided.

Transient Heat Partition Factor For A Sliding Railcar Wheel, T C. Kennedy, C Plengsaard, Robert F. Harder

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

During a wheel slide the frictional heat generated at the contact interface causes intense heating of the adjacent wheel material. If this material exceeds the austenitising temperature and then cools quickly enough, it can transform into martensite, which may ultimately crack and cause wheel failure. A knowledge of the distribution of the heat partitioned into the wheel and the rail and the resulting temperature fields is critical to developing designs to minimize these deleterious effects. A number of theoretical solutions have appeared in the literature to model the thermal aspects of this phenomenon. The objective of this investigation was to …

The Girl Scout Climbing Wall Multidisciplinary Service-Learning Project, Margaret Pinnell, Corinne M. Daprano, Gabrielle Williamson

Mechanical and Aerospace Engineering Faculty Publications

The Girl Scout Wall (GS Wall) project was implemented in two classes at the University of Dayton (UD): a Mechanical and Aerospace Engineering (MAE) course, and a Health and Sports Science (HSS) course, and Sport Facility Management. The MAE course, Introduction to Materials, is a three-credit, third-year required course where students learn about the basic structure and properties of materials as well as the principles of material selection. The Sport Facility Management course is a three-semester hour, required HSS course where students are introduced to the processes of planning, constructing, equipping, maintaining, and managing sport facilities.