Mechanical Engineering Commons^™

The Effects Of Hurricane Wind Field Characteristics On Wind Blade Loads, Michael S. Tsai

Masters Theses

Over recent years, offshore wind energy has been growing around the world. This necessitates placing wind turbines directly in or near the oceans where hurricanes can be. Previous research has suggested that hurricane wind veer and direction change can have adverse loading effects on the turbine. Such effects can create damage to the blade or worsen existing ones. Currently, there is no known design standard for addressing wind veer and direction change specifically from hurricanes. Quantifying the loading contribution from these phenomena is not abundant either.

This thesis seeks to demonstrate a proposed procedure for defining design veer profiles and …

Wind-Wave Misalignment Effects On Multiline Anchor Systems For Floating Offshore Wind Turbines, Doron T. Rose

Masters Theses

Multiline anchors are a novel way to reduce the cost of arrays of floating offshore wind turbines (FOWTs), but their behavior is not yet fully understood. Through metocean characterization and dynamic simulations, this thesis investigates the effects of wind-wave misalignment on multiline anchor systems. Four coastal U.S. sites are characterized in order to develop IEC design load cases (DLCs) and analyze real-world misaligned conditions. Stonewall Bank, Oregon showed the highest 500-year extreme wave height, at 16.6 m, while Virginia Beach, Virginia showed the highest 500-year wind speed, at 56.8 m/s. Misalignment probability distributions, at all sites, are found to converge …

Enabling An Equitable Energy Transition Through Inclusive Research, Michael Ash, Erin Baker, Mark Tuominen, Dhandapani Venkataraman, Matthew Burke, S. Castellanos, M. Cha, Gabe Chan, D. Djokic, J.C. Ford, Anna P. Goldstein, David Hsu, Matt Lacker, C. Miller, D. Nock, A.P. Ravikumar, Allison Bates, Anna Stefanopoulou, E Grubert, D.M Kammen, M. Pastor, S.Z, Attari, S. Carley, D.L Clark, D. Dean-Ryan, U. Kosar, Kerry Bowie, Tina Johnson

ETI Publications

Comprehensive and meaningful inclusion of marginalized communities within the research enterprise will be critical to ensuring an equitable, technology-informed, clean energy transition. We provide five key action items for government agencies and philanthropic institutions to operationalize the commitment to an equitable energy transition.

Tall Timber In Denver: An Exploration Of New Forms In Large Scale Timber Architecture, Andrew P. Weuling

Masters Theses

Wood has been utilized by humans for thousands of years in the construction of our built environment. More recently, our expanded understanding of the material and the advancement of engineered wood have allowed us to use wood like never before. Concrete and steel, however, have emerged as the main materials used in large scale construction in the late 19^th and 20^th Centuries. As we are battling and searching for solutions to climate change, the importance of wood in large scale construction has increased as not only is its carbon intensity is lower than steel and concrete, but its …

Material Property Heterogeneity In Dimensional Lumber And Its Relationship To Mass Timber Performance, Fiona O'Donnell

Doctoral Dissertations

According to the Environmental Protection Agency, buildings account for 38% of the United States' carbon dioxide emissions, providing architects and structural engineers a unique opportunity to mitigate a significant factor driving climate change by implementing innovative and sustainable technology in infrastructure design. Wood and mass timber products are becoming an increasingly popular alternative building material due to their economic and environmental benefits. The natural growth of wood leads to highly heterogeneous material properties. Defects such as checks, knots, and localized slope of grain contribute to some of this variation; however, wood properties vary significantly even in clear wood. Using mass …

Harnessing The Mechanics Of Thin-Walled Metallic Structures: From Plate-Lattice Materials To Cold-Formed Steel Shear Walls, Fani Derveni

Doctoral Dissertations

Thin-walled structures have received a lot of interest during the last years due to their light weight, cost efficiency, and ease in fabrication and transportation, along with their high strength and stiffness. This dissertation focuses on the mechanical performance of thin-walled metallic structures from cold-formed steel shear walls and connections (PART I) to plate-lattice architected materials (PART II) via computational, experimental, and probabilistic methods. Cold-formed steel (CFS) shear walls subjected to seismic loads is the focus of PART I of this dissertation. An innovative three-dimensional shell finite element model of oriented strand board (OSB) sheathed CFS shear walls is introduced …

Modeling Of Electrical Grid Systems To Evaluate Sustainable Electricity Generation In Pakistan, Muhammad Mustafa Amjad

Masters Theses

Pakistan has always had a history of severe energy shortfalls, which rose up to an alarming 33% in 2013. This situation was countered by investments in the energy sector through the China Pakistan Economic Corridor (CPEC), which were unfortunately largely based on brown fuels. Although beneficial in the short term, these investments do not bode well for the climate scenario of Pakistan, with various parts of the country already having experienced temperatures rise of 1-3°C. To ensure that the current situation doesn’t exacerbate and is tackled in a timely manner, this research aims to examine how the untapped potential of …

The Promise Of Vr Headsets: Validation Of A Virtual Reality Headset-Based Driving Simulator For Measuring Drivers’ Hazard Anticipation Performance, Ganesh Pai Mangalore

Masters Theses

The objective of the current study is to evaluate the use of virtual reality (VR) headsets to measure driving performance. This is desirable because they are several orders of magnitude less expensive and, if validated, could greatly extend the powers of simulation. Out of several possible measures of performance that could be considered for evaluating VR headsets, the current study specifically examines drivers’ latent hazard anticipation behavior both because it has been linked to crashes and because it has been shown to be significantly poorer in young drivers compared to their experienced counterparts in traditional driving simulators and in open …

Mechanical Performance Of Structural Systems With Missing Members: From Buildings To Architected Materials, Panagiotis Pantidis

Doctoral Dissertations

Structural systems are potentially subjected to damage initiating scenarios throughout the course of their service time. Depending on the nature and extent of the damaging event, they may experience significant reduction or even complete loss of their mechanical performance. This dissertation delves into the mechanics of structural systems under the notion of missing members from their domain, investigating types of structural systems: a) multi-story steel framed buildings, and b) materials with a truss-lattice microstructure. Part I of the dissertation investigates the performance of multi-story steel framed buildings under a column removal scenario, developing an analytical framework for their quasi-static robustness …

A Multiline Anchor Concept For Floating Offshore Wind Turbines, Casey Fontana

Doctoral Dissertations

Floating offshore wind turbines (FOWTs) hold great potential for the renewable energy industry, but capital costs remain high. In efforts to increase FOWT substructure efficiency and reduce costs, this thesis investigates a novel multiline anchor concept in which FOWTs share anchors instead of being moored separately. The goal of this thesis is to evaluate the force dynamics, design, and potential cost reduction of the system. Anchor forces are simulated using the NREL 5 MW reference turbine and OC4-DeepCwind semisubmersible platform, and multiline anchor force is computed as the vector sum of the contributing mooring line tensions. The use of a …

Modeling Deformation Behavior And Strength Characteristics Of Sand-Silt Mixtures: A Micromechanical Approach, Mehrashk Meidani

Doctoral Dissertations

This dissertation is comprised of six chapters. In the first chapter the motivation of this research, which was modeling the deformation behavior and strength characteristics of soils under internal erosion, is briefly explained. In the second chapter a micromechanis-based stress-strain model developed for prediction of sand-silt mixtures behavior is presented. The components of the micromechanics-based model are described and undrained behavior of six different types of sand-silt mixtures is predicted for several samples with different fines contents. The need for a more comprehensive compression model for sand-silt mixtures is identified at the end of this chapter. This desired compression model …

University Of Massachusetts Amherst 2012-2021 Capital Improvement Projects, Douglas Vigneau, Juanita Holler, University Of Massachusetts Building Authority, John Mathews, Ludmilla Pavlova-Gillham, Ezra Small

Campus Planning Master Plans

In 2013 the University of Massachusetts, on behalf of the University of Massachusetts Building Authority and Massachusetts Division of Capital Asset Management and Maintenance (DCAMM), submitted an Expanded Environmental Notification Form for the University's 2012 - 2021 Capital Improvement Plan to the Executive Office of Energy and Environmental Affairs (EOEEA) Massachusetts Environmental Policy Act Office (MEPA).

Taken individually, the majority of the Projects, comprising of 13 building/space, 7 site/landscape, and 5 facility/ utility scale improvement projects, do not require MEPA review as most of the Project sites are confined to infill areas on campus that are currently or …

Umass Amherst Green Building Guidelines 2013, Ludmilla Pavlova-Gillham, Ted Mendoza, Ezra Small, Patricia O'Flaherty, Nariman Mostafavi, Mohamed Farzinmoghadam, Somayeh Tabatabaee Pozveh

Campus Planning Reports and Plans

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Green Building Guidelines provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED certification by focusing the conversation on green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance buildings.

Multi Rotor Wind Turbine Design And Cost Scaling, Preeti Verma

Masters Theses 1911 - February 2014

The current generation wind turbines are upscaled into multi megawatt range in terms of output power. However, the energy benefit from the turbine is offset by the increased mass and cost. Twenty MW wind turbines are now feasible with rotor diameters up to 200 m, according to a new report from the EU-funded UpWind project in 2011. The question is, how much bigger can wind turbines get realistically? One concept worth considering, and the one that is the subject of this thesis, is to have more than one rotor on a single support structure. Such turbines could have a greater …

Load Reduction Of Floating Wind Turbines Using Tuned Mass Dampers, Gordon M. Stewart

Masters Theses 1911 - February 2014

Offshore wind turbines have the potential to be an important part of the United States' energy production profile in the coming years. In order to accomplish this wind integration, offshore wind turbines need to be made more reliable and cost efficient to be competitive with other sources of energy. To capitalize on high speed and high quality winds over deep water, floating platforms for offshore wind turbines have been developed, but they suffer from greatly increased loading. One method to reduce loads in offshore wind turbines is the application of structural control techniques usually used in skyscrapers and bridges. Tuned …

Development Of A Cost Minimizing Strategy To Mitigate Bird Mortalities In A Wind Farm, Karamvir Singh

Masters Theses 1911 - February 2014

Wind is the second largest renewable energy source after solar. It is one of the fastest growing sources of electricity in the world and currently of wind energy is installed in the United States and an additional is under construction (Office of Energy and Environment Affairs, 2011). For the growth of wind electricity, one of the most prominent environmental concerns relates to the death of birds, bats and other avian species resulting from collision with turbine blades.

This thesis develops a model that provides the optimal strategy of turning the turbines off in a wind farm for certain periods to …

Vibration Reduction Of Offshore Wind Turbines Using Tuned Liquid Column Dampers, Colin Roderick

Masters Theses 1911 - February 2014

Offshore wind turbines (OWTs) are becoming an accepted method for generating electricity. The environmental conditions of offshore locations often impose high wind and wave forces on OWTs making them susceptible to intense loading and undesirable vibrations. One method to reduce system vibrations is through the use of structural control devices typically utilized in civil structures. Tuned liquid column dampers (TLCDs) show great promise in the application to OWTs due to their high performance and low cost. This thesis examines the use of TLCDs in OWTs.

Equations of motion for limited degree-of-freedom TLCD-turbine models are presented. A baseline analysis of each …

Analytical Modeling Of Tree Vibration Generated During Cutting Process, Payman Karvanirabori

Masters Theses 1911 - February 2014

There are several ways to cut down a tree. The piece by piece cutting method is studied in this research. By modeling the cutting process into simple dynamic models and obtaining governing equations of motion of tree and cut piece in each model, the forces during cutting process were calculated. The method was then applied to a set of real data and tree vibrations were compared with field measurements. The study is very rare in the case of the variety of the topics it covers from dynamics and mechanics to finite element modeling of a biological system.