Mechanical Engineering Commons^™

Thermocapillary Effects In Driven Dewetting And Self-Assembly Of Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

A mathematical model for the evolution of pulsed laser-irradiated, molten metallic films has been developed using the lubrication theory. The heat transfer problem that incorporates the absorbed heat from a single laser beam or the interfering laser beams is solved analytically. Using this temperature field, we derive the 3D long-wave evolution PDE for the film height. To get insights into dynamics of dewetting, we study the 2D version of the evolution equation by means of a linear stability analysis and by numerical simulations. The stabilizing and destabilizing effects of various system parameters, such as the reflectivity, the peak laser beam …

Thermocapillary Effects In Driven Dewetting And Self-Assembly Of Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

A mathematical model for the evolution of pulsed laser-irradiated, molten metallic films has been developed using the lubrication theory. The heat transfer problem that incorporates the absorbed heat from a single laser beam or the interfering laser beams is solved analytically. Using this temperature field, we derive the 3D long-wave evolution PDE for the film height. To get insights into dynamics of dewetting, we study the 2D version of the evolution equation by means of a linear stability analysis and by numerical simulations. The stabilizing and destabilizing effects of various system parameters, such as the reflectivity, the peak laser beam …

Thermocapillary Effects In Driven Dewetting And Self-Assembly Of Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

A mathematical model for the evolution of pulsed laser-irradiated, molten metallic films has been developed using the lubrication theory. The heat transfer problem that incorporates the absorbed heat from a single laser beam or the interfering laser beams is solved analytically. Using this temperature field, we derive the 3D long-wave evolution PDE for the film height. To get insights into dynamics of dewetting, we study the 2D version of the evolution equation by means of a linear stability analysis and by numerical simulations. The stabilizing and destabilizing effects of various system parameters, such as the reflectivity, the peak laser beam …

Thermocapillary Effects In Driven Dewetting And Self-Assembly Of Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mikhail Khenner

A mathematical model for the evolution of pulsed laser-irradiated, molten metallic films has been developed using the lubrication theory. The heat transfer problem that incorporates the absorbed heat from a single laser beam or the interfering laser beams is solved analytically. Using this temperature field, we derive the 3D long-wave evolution PDE for the film height. To get insights into dynamics of dewetting, we study the 2D version of the evolution equation by means of a linear stability analysis and by numerical simulations. The stabilizing and destabilizing effects of various system parameters, such as the reflectivity, the peak laser beam …

Simulation, Synthesis, And Characterization Of Hydrogels And Nanocomposite Gels., Kamleshkumar J. Suthar

Dissertations

Stimuli-responsive gels are three-dimensional, cross-linked polymeric materials that undergo large physical change in response to the environmental stimuli, like temperature, pH, electrical potential, and irradiation. Ferrogels are colloidaldispersion of magnetic nanoparticles in the hydrogel network. The magnetic nanoparticles are attached to the polymeric network by different adhesive forces; as a result, it becomes sensitive to the applied magnetic field.

The main objective of this research is the simulation, synthesis, and characterization of the hydrogel and ferrogel. Simulation of the hydrogel response was performed for various environmental stimuli using a multiphysics finite element analysis software, COMSOL. The pH and electrical response …

Semi-Automatic Image Segmentation For Volumetric Visualization Of Pelvis Ct Scan-Images, Suprijanto Suprijanto, Farida I. Muchtadi, Irwan Setiawan

Makara Journal of Technology

Semi-Automatic Image Segmentation for Volumetric Visualization of Pelvis CT Scan-Images. The current development of computerized tomography (CT) has enable us to obtain cross sectional image using multi slicing techniques in an order of few seconds. The obtained images represent several tissue structures on cross section slice being imaged. One challenge to help diagnosis using CT images is extracting an anatomic structure of interest using a method of image segmentation and volumetric visualization with the assistance of computers. In case of volumetric visualization of pelvis bones extracted from multi-slice CT images, whole images which are containing part of pelvis bone structures …

Implementation Of Six Sigma Method To Maintain The Quality Of Construction Projects, Yusuf Latief, Retyaning Puji Utami

Makara Journal of Technology

Implementation of Six Sigma Method to Maintain The Quality of Construction Projects. Six sigma (6-sigma) is a method that widely developed in the world, especially in manufacturing industry to decrease failures in achieving good quality in construction projects. The objective of this research is to explore the existing condition of quality management and the aplication of 6-sigma method in maintaining quality of construction projects. Structured interviews to experienced experts and people who were recommended by their companies were conducted. Non-parametric analysis using frequencies distribution procedures were used for analysis. The result shows that existing condition in quality management of construction …

Simple Ml Detector For Multiple Antennas Communication System, Ahmad Taqwa, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro

Makara Journal of Technology

Simple ML Detector for Multiple Antennas Communication System. In order to support providing broadband wireless communication services against limited and expensive frequency bandwidth, we have to develop a bandwidth efficient system. Therefore, in this paper we propose a closed-loop MIMO (Multiple-Input-Multiple-Output) system using ML (Maximum Likelihood) detector to optimize capacity and to increase system performance. What is especially exciting about the benefits offered by MIMO is that a high capacity and performance can be attained without additional frequency-spectral resource. The grand scenario of this concept is the attained advantages of transformation matrices having capability to allocate transmitted signals power suit …

Effects Of Ph On Calcium Carbonate Precipitation Under Magnetic Field, Nelson Saksono, Yuliusman Yuliusman, Setijo Bismo, Roekmijati W. Soemantojo, Azwar Manaf

Makara Journal of Technology

Magnetic field effect on CaCO3 precipitation is the key parameter in evaluating the effectiveness of Anti-scale Magnetic Treatment (AMT). The purpose of this study was to investigate magnetic fields influence on CaCO3 precipitation in high and low super-saturated CaCO3 solution by varied pH CaCO3 solution using circulation flow fluid system. The observation results in the high super saturated solution (pH 8.5) showed the increase of precipited CaCO3 in magnetized solutions compared to those in non-magnetic solution during circulation process. In the low super-saturated CaCO3 solution (pH 6.4) it was found that magnetic treatment increased CaCO3 precipitation after circulation process. In …

Performance Of Hollow Fiber Membrane Gas-Liquid Contactors To Absorb Co2 Using Diethanolamine (Dea) As A Solvent, Sutrasno Kartohardjono, Pan Ade Nata, Eko Prasetio, Yuliusman Yuliusman

Makara Journal of Technology

This study uses DEA solution to absorb CO2 from the gas flow through the hollow fiber membrane contactors. This study aims to evaluate the performance of hollow fiber membrane contactors to absorb CO2 gas using DEA solution as solvent through mass transfer and hydrodynamics studies. The use of DEA solution is to reduce the mass transfer resistance in the liquid phase, and on the other side, the large contact area of the membrane surface can cover the disadvantage of membrane contactors; additional mass transfer resistance in the membrane phase. During experiments, CO2 feed flows through the fiber lumens, while the …

Potency Of Thermoelectric Generator For Hybrid Vehicle, Nandy Putra, Raldi Artono Koestoer, Mohammad Adhitya, Ardian Roekettino, Bayu Trianto

Makara Journal of Technology

Potency of Thermoelectric Generator for Hybrid Vehicle. Thermoelectric Generator (TEG) has been known as electricity generation for many years. If the temperature difference occurred between two difference semi conductor materials, the current will flow in the material and produced difference voltage. This principle is known as Seebeck effect that is the opposite of Peltier effect Thermoelectric Cooling (TEC). This research was conducted to test the potential of electric source from twelve peltier modules. Then, these thermoelectric generators were applied in hybrid car by using waste heat from the combustion engine. The experiment has been conducted with variations of peltier module …

Mechanical Properties Of Ramie Fiber Reinforced Epoxy Lamina Composite For Socket Prosthesis, Tresna P. Soemardi, Widjajalaksmi Kusumaningsih, Agustinus Purna Irawan

Makara Journal of Technology

Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis. This paper presents an investigation into the application of natural fiber composite especially ramie fiber reinforced epoxy lamina composite for socket prosthesis. The research focuses on the tensile and shear strength from ramie fiber reinforced epoxy lamina composite which will be applied as alternative material for socket prosthesis. The research based on American Society for Testing Material (ASTM) standard D 3039/D 3039M for tensile strength and ASTM D 4255/D 4255M-83 for shear strength. The ramie fiber applied is a fiber continue 100 % Ne14'S with Epoxy Resin Bakelite …

Intermetallic Cu3sn Phase Layer On Electrode’S Tip Of Galvanized Resistance Spot Welding, Muhammad Anis, Aulia Irsyadi, Deni Ferdian

Makara Journal of Technology

Intermetallic Cu3Sn Phase Layer on Electrode’s Tip of Galvanized Resistance Spot Welding. A resistance spot welding method is commonly used in automotive industries application. In a resistance spot welding method, the copper electrode has a significant role as an electric current carrier for joining thin metal sheet. This research was focused on studying the effect of tin layer at the electrode tip for joining galvanized steel sheet. The main variable of this research is in the thickness of the intermetallic Cu3Sn layer. The result showed that the introduction of tin layer less than 1 μm in thickness on the electrode …

Absolute Nitrogen Atom Density Measurements By Two-Photon Laser-Induced Fluorescence Spectroscopy In Atmospheric Pressure Dielectric Barrier Discharges Of Pure Nitrogen, Et-Touhami Es-Sebbar, Christian Sarra-Bournet, Nicolas Naudé, Françoise Massines, Nicolas Gherardi

Dr. Et-touhami Es-sebbar

In this paper, two-photon absorption laser induced fluorescence spectroscopy is used to follow the nitrogen atom density in flowing dielectric barrier discharges fed with pure nitrogen and operating at atmospheric pressure. Two different dielectric barrier discharge regimes are investigated: the Townsend regime, which is homogeneous although operating at atmospheric pressure, and the more common filamentary regime. In both regimes, densities as high as 3x1014 /cm3 are detected. However, the N atoms kinetic formation depends on the discharge regime. The saturation level is reached more rapidly with a filamentary discharge. For a given discharge regime, the N atom density depends strongly …

Contributions To The Development Of The S.E.T.U.P. (Experimental And Theoretical Simulations Useful For Planetology) Project, E. Arzoumanian, C. Romanzin, M-C. Gazeau, Et. Es-Sebbar, A. Jolly, S. Perrier, Y. Benilan

Dr. Et-touhami Es-sebbar

No abstract provided.

Multiwavelength Studies For Titan's Atmospheric Composition Analysis, Y. Benilan, Et. Es-Sebbar, N. Fray, M-C. Gazeau, A. Jolly, M. Schwell, J. Guillemin

Dr. Et-touhami Es-sebbar

Titan's atmosphere mainly made of nitrogen and methane is rich in organic molecules. Hydrocarbons are formed from the photolytic dissociation of CH4 and nitriles are created by dissociation of N2 followed by reactions with hydrocarbons. In order to understand the physicochemical mechanisms responsible for the evolution of Titan's atmosphere, photochemical models are built. The latter need constrains for vertical profiles of organic compounds from the high thermosphere down to the low stratosphere as well as photodissociation rates. Those profiles over the entire atmosphere can be retrieved from Cassini observations, in particular by limb sounding, coupling infrared and ultraviolet spectroscopy. However, …

Vuv Photostability Of Prebiotic Species, M. Schwell, Y. Bénilan, M.-C. Gazeau, N. Fray, A. Jolly, Et. Es-Sebbar, N. Champion, S. Leach, H. W Jochims, H. Baumgärtel, E. Rühl

Dr. Et-touhami Es-sebbar

No abstract provided.

S.E.T.U.P. Experimental And Theoretical Simulations Useful For Planetology- Related Studies In The Frame Of A Program Of Titan’S Atmosphere Laboratory Simulations, M.-C. Gazeau, Et. Es-Sebbar, E. Arzoumanian, C. Romanzin, A. Jolly, S. Perrier, Y. Bénilan

Dr. Et-touhami Es-sebbar

No abstract provided.

Characterization Of An N2 Flowing Microwave Post-Discharge By Oes Spectroscopy And Determination Of Absolute Ground-State Nitrogen Atom Densities By Talif, Et. Es-Sebbar, Y. Benilan, A. Jolly, M-C. Gazeau

Dr. Et-touhami Es-sebbar

A flowing microwave post-discharge source sustained at 2.45 GHz in pure nitrogen has been investigated by optical emission spectroscopy (OES) and two-photon absorption laser-induced fluorescence (TALIF) spectroscopy. Variations of the optical emission along the post-discharge (near, pink and late afterglow) have been studied and the gas temperature has been determined. TALIF spectroscopy has been used in the late afterglow to determine the absolute ground-state nitrogen atomic densities using krypton as a reference gas. Measurements show that the microwave flowing post-discharge is an efficient source of N (4S) atoms in late afterglow. In our experimental conditions, the maximum N (4S) density …

Design And Cfd Analysis Of Mass Transfer And Shear Stresses Distributions In Airlift Reactor, Rachid Bannari, Brahim Selma, Abdelfettah Bannari, Pierre Proulx

Abdelfettah Bannari Ph.D

The design, scale-up and performance evaluation of biological reactors require accurate information about the gas-liquid flow dynamics. In this study, we use CFD techniques to investigate important parameters of the multiphase flow dynamics on an initial airlift bioreactor in order to improve its design. Such parameters are distributions of shear stresses and mass transfer. Our initial proposed design of the airlift bioreactor was used for biomass growing. Specifically to produce cellulase enzyme using the fungus Trichoderma Reesei. However, the morphology of the microorganism obtained in this bioreactor was not appropriated to produce cellulase. Since the microorganism morphology presented a small …

Mechanics-Based Model For Non-Affine Swelling In Perfluorosulfonic Acid (Pfsa) Membranes, Ahmet Kusoglu, Michael H. Santare, Anette M. Karlsson

Mechanical Engineering Faculty Publications

A mechanics-based model is developed to predict the swelling pressure in perfluorosulfonic acid (PFSA) ionomer membranes during water uptake. The PFSA membrane is represented as a two-phase system, where the water-filled hydrophilic domains are dispersed throughout the hydrophobic polymer matrix. Two representative volume elements (RVEs) are used to represent the nanostructure: (i) a spherical RVE with a spherical hydrophilic domain at the center, and (ii) a cylindrical RVE with a cylindrical hydrophilic domain. The model starts with the non-affine swelling behavior of the membrane and interprets this as a structural reorganization of the RVEs to characterize the microscopic deformation. Swelling …

Proceedings Of The Scientific Conference On Energy And It At Alvsjo Fair, Stockholm March 11-12, 2009 In Connection With The “Energitinget 2009, Dr. Erik Dahlquist, Dr. Jenny Palm

Dr. Erik Dahlquist

This book contains the proceedings from the Energy and IT conference at Alvsjo Energy conference "Energitinget" arranged by Swedish Energy Agency, with approximately 2500 visitors. The papers contain both technical and social science papers, relating to both energy efficiency in buildings and in industry.

Environmental Remediation Full-Scale Implementation: Back To Simple Microbial Massive Culture Approaches, Agung Dhamar Syakti, Mohamad Yani

Makara Journal of Technology

Using bioaugmentation and biostimulation approach for contaminated soil bioremediation were investigated and implemented on field scale. We combine those approaches by culturing massively the petrophilic indigenous microorganisms from chronically contaminated soil enriched by mixed manure. Through these methods, bioremediation performance revealed promising results in removing the petroleum hydrocarbons comparatively using metabolite by product such as biosurfactant, specific enzymes and other extra-cellular product which are considered as a difficult task and will impact on cost increase.

Lipid Production From Microalgae As A Promising Candidate For Biodiesel Production, Arief Widjaja

Makara Journal of Technology

Recently, several strains of microalgae have been studied as they contain high lipid content capable to be converted to biodiesel. Fresh water microalgae Chlorella vulgaris studied in this research was one of the proof as it contained high triacyl glyceride which made it a potential candidate for biodiesel production. Factors responsible for good growing of microalgae such as CO2 and nitrogen concentration were investigated. It was found that total lipid content was increased after exposing to media with not enough nitrogen concentration. However, under this nitrogen depletion media, the growth rate was very slow leading to lower lipid productivity. The …

A Coupled Cfd-Kinetic Models For Cellulase Production In Airlift Reactor, Rachid Bannari, Abdelfettah Bannari, Brahim Selma, Pierre Proulx

Abdelfettah Bannari Ph.D

Cellulase production provides a catalyst for cellulose hydrolysis to glucose, to be used for eventual production of ethanol. The transport of reactants may influence the reaction rate remarkably, for the biological reaction, especially the enzymatic reaction, The transport behavior of the components in a biological system should be considered in the model. In this work, we propose a coupled model between hydrodynamics (twoPhaseEuler- Foam) and a kinetic model for batch and fed-batch cellulase enzyme production by T. reesei from cellulose/lactose substrate which is constructed from literature concepts and laboratory data. Good agreement is obtained between the results and experimental data.

Improved Predictive Power Control Of Cdma System In Rayleigh Fading Channel, Adit Kurniawan, Iskandar Iskandar, Sayid Machdar

Makara Journal of Technology

In this paper an improved prediction-based power control is proposed for code division multiple access (CDMA) systems in Rayleigh fading channel environments. One of the most serious problems which degrades the performance of power control algorithm is the effect of feedback delay. To overcome the effect of feedback delay, power control needs to employ prediction algorithm which utilises the correlation property of the past channel samples measurements to predict the future sample values. In CDMA power control, however, the correlation property of channel measurements is destroyed because the transmit power is continuously updated for each power control interval. The prediction …

Thermal Stability Of Clay's Galleries In Polypropylene - Clay (Montmorillonite) Nanocomposites Using Polypropylene-Gmaleic Anhydride As Compatibilizer, Sotya Astutiningsih, Pandu Lanang Kinasih, Arief Cahyo Wibowo

Makara Journal of Technology

Thermal Stability of Clay's Galleries in Polypropylene - Clay (montmorillonite) Nanocomposites using Polypropylene-g- Maleic Anhydride as Compatibilizer. Superior properties of food packaging can be achieved using nanocomposite technology. However, fabrication of this materials are complex and expensive. Long term objectives of this research is the synthesis of low cost polypropylene clay nanocomposites (PPCN) via a short-cut method known as ‘cascade engineering’. Cascade engineering principle in PPCN fabrication is performed by using compatibilizer (to enable the mixing of PP and clay) masterbatch, and PPCN in one pot process using melt mixer. This paper present the experimental results using small-angle x-ray diffraction …

Muara Bekasi – Muara Tawar Offshore Transmission Pipeline Routing And Economic Analysis., Asep Handaya Saputra, Ardiansyah Ardiansyah

Makara Journal of Technology

Muara Bekasi – Muara Tawar Offshore Transmission Pipeline Routing and Economic Analysis. Power plant Muara Tawar will substitute the need of oil fuel to gas as form of economizing and energy conservation. The nearest supply point to fulfill natural gas needed on Muara Bekasi. So that Power Plant Company needed to develop gas pipeline infrastructure to joining the point.The purpose of this study is to create a system of gas transmission pipeline from gas supply point at Muara Bekasi to Power Plant Muara Tawar trough to offshore area. Design of gas transmission pipeline is started with technical data collection and …

Implementation Of Web Cam As Motion Detector With Directshow Interfacing, Yonatan Santoso, Iwan Setiyawan, Victor N. Papilaya

Makara Journal of Technology

Implementation of Web Cam as Motion Detector with DirectShow Interfacing. One of many ways to take control a web cam is by using DirectShow which is integrated in DirectX. DirectShow acts like an API therefore it is easier to use. Afterwards, web cam will be implemented to detect object’s motion as well as camera surveillance. The method is by comparing a reference image with other image which is taken lately. If there are differences between those image it means motion has been detected.

On The Performance Of Svd-Dwt Based Digital Video Watermarking Technique With Semi-Blind Detector, Tarzan Basaruddin, Della Maulidiya

Makara Journal of Technology

On the Performance of SVD-DWT Based Digital Video Watermarking Technique with Semi-Blind Detector. This paper presents a watermarking technique for digital video. The proposed scheme is developed based on the work of Ganic and Chan which took the virtue of SVD and DWT. While the previous works of Chan has the blind detector property, our attempt is to develop a scheme with semi-blind detector, by using the merit of the DWT-SDV technique proposed by Ganic which was originally applied to still image. Overall, our experimental results show that our proposed scheme has a very good imperceptibility and is reasonably robust …