Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 2 of 2
Full-Text Articles in Mechanical Engineering
Freeform Fabrication Of Zirconium Diboride Parts Using Selective Laser Sintering, Ming-Chuan Leu, Erik B. Adamek, Tieshu Huang, Greg Hilmas, Fatih Dogan
Freeform Fabrication Of Zirconium Diboride Parts Using Selective Laser Sintering, Ming-Chuan Leu, Erik B. Adamek, Tieshu Huang, Greg Hilmas, Fatih Dogan
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Using the Selective Laser Sintering (SLS) process, both flexural test bars and 3D fuel injector components have been fabricated with zirconium diboride (ZrB2) powder. Stearic acid was selected as the binder. Values of SLS process parameters were chosen such that the green parts could be built with sharp geometrical features and that the sintered parts could have good mechanical properties. After binder burnout and sintering, the SLS fabricated ZrB2 test bars achieved 80% theoretical density, and the average flexural strength of the sintered samples was 195 MPa. These values demonstrate the feasibility of the SLS process for …
The Effect Of Vibratory Milling On The Powder Properties Of Zinc Oxide Varistors, Maura Kelleher, M.S.J. Hashmi
The Effect Of Vibratory Milling On The Powder Properties Of Zinc Oxide Varistors, Maura Kelleher, M.S.J. Hashmi
Articles
The formation of powders from multi-elemental oxides for the subsequent formation of a green and sintered compact body is a major processing operation in the manufacture of ZnO varistors. The physical and chemical properties of the metal oxides are crucial not only for the formation of a varistor component with optimum microstructure and thus electrical characteristics but also for avoiding the introduction of flaws and reduced yield during subsequent manufacturing stages. The effect of vibratory milling using cylindrical zirconia media on the physical and chemical properties of the mixed multi-elemental oxide additives of a commercial ZnO varistor formulation was studied. …