Mechanical Engineering Commons^™

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …

Enhancing The Performance Of Conventional Solar Still Using The Nano-Doped Paint (Ndp) Coating, Hagar Alm-Eldin Bastawissi Prof.Dr, Nermin Elgendy Engineer, Ayman R. El-Tohamy

Journal of Engineering Research

Nations are throughout the entire globe continuously confronting the problem of potable water shortage. Recently, it has been thought that using solar energy to desalinate brackish water offers a practical answer to the world's water crises. The output of these stills, is meager, and academics haven't done much to boost it in any way. Solar distillers have been proposed as an efficient method to produce potable water. In recent years, saltwater has produced drinking water by various ways. The efficiency of a solar distiller is significantly influenced by various factors, most important factor of them is the absorber surface. In …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Performance Comparison Of Several Control Algorithms For Tracking Control Of Pantograph Mechanism, Laylaa Mahmoud Eng, Mohamed Shamseldin Dr, Mohamed Sallam Dr, Abdelghany Mohamed Prof

Future Engineering Journal

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics …

Relative Rate Observer Self-Tuning Of Fuzzy Pid Virtual Inertia Control For An Islanded Microgrid, Ahmed H. Mohamed, Helmy M. El Zoghby, Mohiy Bahgat, A. M. Abdel Ghany

Future Engineering Journal

Expanding the usage of renewable energy in islanded microgrids leads to a reduction in its total inertia. Low inertia microgrids have difficulties in voltage and frequency control. That affected saving its stability and preventing a blackout. To improve low inertia islanded microgrids' dynamic response and save their stability, this paper presented relative rate observer self-tuning fuzzy PID (RROSTF-PID) based on virtual inertia control (VIC) for an islanded microgrid with a high renewable energy sources (RESs) contribution. RROSTF-PID based on VIC's success in showing remarkable improvement in the microgrid's dynamic response and enhancement of its stability. Moreover, it handles different contingency …

The Effective Strategies For Mitigation The Impact Of Covid-19 On Construction Projects In Egypt, Nora Magdy Essa, Ibrahim Mahdi, Hassan Mohamed Ibrahim

Future Engineering Journal

From the time when the first narrated infections in Wuhan China, in late 2019, COVID-19 has had a substantial peal on human life and health. By the early of 2020, the World Health Organization (WHO) announced the eruption of COVID-19, a public health crisis of international concern. On 11 March 2020, the World Health Organization officially announced COVID-19 a pandemic. The first case was infected in Egypt of covid-19 on Feb 14, 2020 (Gilbert et al., 2020). On 16 March 2020, the Egyptian Government began issuing decisions as preventative courses as part of the country's inclusive plan to cope with …

Estimating The Weights Of Latticed Power Transmission Towers Using Genetic Programming, Ahmed M. Ebid Dr.

Future Engineering Journal

The recent booming in the power network industry inspired a lot of researchers to develop models to estimate the optimum cost of transmission towers. Unlike previous researches which depended on design the tower from scratch, this research depends on collecting actual database from several projects around the globe and applying the well-known (GP) technique to develop a model to predict the tower weight. The accuracy of the developed formula was about 84%. The developed model could be used in early tender stage or to check design economy.

Strategic Energy Master Planning For Carbon Neutrality, Marie Patterson

CSU Journal of Sustainability and Climate Change

Universities across the United States are generating goals to be more sustainable and carbon neutral. The energy used in existing buildings on campuses amount to a large volume of greenhouse emissions and must be reduced to help achieve neutrality goals. Strategic Energy Master Plans are instrumental to support these goals through the development of recommendations to reduce energy. Calculating the energy use intensity for existing buildings, a main component of a Strategic Energy Master Plan, can help the campus understand where energy is being used the most. With this information the highest energy consuming buildings can be the focus of …

Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov

Chemical Technology, Control and Management

The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …

A Dynamic Programming Approach To Determine Optimum Modularity Level In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Modular packaging facilitate customization for accommodating variable product sizes in a product family. When determining package sizes for product variability, packaging engineers does not find difficulty to determine package dimension for less product variety whereas if the product variety is more, then determining the dimension of modular package involves complex decision-making and time-consuming process to find the optimal solution. This in turn directly impacts the overall lead time of the supply chain. Thus, in this paper a dynamic programming is developed to determine the quantity and dimension of modular packages for every demand of assorted products sizes. The program helps …

Extinguishment Of Diffusion Flames Formed Over A Porous Plate Burner Using Rubber Balloons Filled With Inert Gases, Hiroyuki Torikai, Shinya Kudo

Progress in Scale Modeling, an International Journal

We have proposed an inert gas, rubber-balloon extinguishing method which might increase the effectiveness of extinguishing flames and decreasing the amounts of agents needed for fire suppression. Hence, extinguishing experiments have been performed to further clarify possible extinguishing characteristics, mechanisms and scaling effects of this method. Carbon dioxide, nitrogen, argon and helium gases were used as the extinguishing agents. Methane-air and propane-air diffusion flames were formed on two different diameter, round porous plate burner and used as the targets for extinguishment. The extinguishing probabilities were measured, and the extinguishing processes were observed with a high-speed camera. As a result, an …

Data-Driven Tools Guided By First-Principles For Scale Modeling, Sadegh Poozesh

Progress in Scale Modeling, an International Journal

For decades, traditional scale-modeling techniques have been relying on first-principles models (FPMs). FPMs have been used to find non-dimensional numbers (PIs) and identify normalized underlying forces and energies behind the phenomenon in focus. The two main challenges with FPM-based PIs extraction are finding the relevant PIs and proper correlations between PIs. The emergence and surge of data-driven modeling (DDM) provide a new opportunity to leverage experimental data in model development across scales/plants. In this paper, first, the two mentioned issues in PIs development will be elaborated to reveal the gap, and second, a new insight into scale modeling and similarity …

Safety Standards Must Be Met For Fire Fighting In Educational Workshops In Industrial Secondary Schools In The Arab Republic Of Egypt, Ibrahim Mahmoud Hassan, Wael Ahmed Rady, Walid Mahmoud El-Nahas

Emirates Journal for Engineering Research

The aim of the research is to establish safety standards for fire fighting within educational workshops in industrial secondary schools to determine the structural requirements for designing workshops in educational buildings and meet international standards. To achieve this a questionnaire was made and data collected for analysis and hypothesis testing using the statistical package of social Sciences (SPSS). Through the adoption of a number of different statistical methods and after conducting the analysis of research data and testing its hypotheses find a number of results, most importantly that the standards conform to international and local standards . The results also …