Mechanical Engineering Commons^™

Spatial Hearing In Simulated Reverberant Classroom Environments, Gabriel Seth Evan Weeldreyer

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Spatial hearing provides access to auditory spatial cues that promote speech perception in noisy listening situations. However, reverberation degrades auditory spatial cues and limits listeners’ ability to utilize these cues for segregating target speech from competing babble. Hence, spatial unmasking—an intelligibility benefit from a spatial separation between a target and masker—is reduced in reverberant environments as compared to free field. This work tests the hypothesis that interaural decorrelation, the result of increasing reverberation, will broaden the perceived auditory source width with a cascading effect of reduced auditory spatial acuity and subsequently poorer spatial unmasking. To understand the perceptual consequences of …

A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daniel Stutts, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

This paper presents a concept of producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method developed at Missouri University of Science and Technology. This paper aims to demonstrate the use of electro-deoxidation to reduce aluminum oxide (i.e., alumina) into aluminum and oxygen gas via electrolysis in a molten salt bath for the production of aluminum on the Moon. It is shown that with a steady supply of hydrogen chloride, this in-situ resource utilization (ISRU) method could supply several necessary materials consumed in the electro-deoxidation process except hydrogen chloride to produce …

Beneficiation Of Lunar Regolith Simulants Through Electrostatic Sieving And Magnetic Separation, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

In the light of future development of lunar structures, in-situ feldspar beneficiation is imperative for metal extraction. This research incorporates the tandem use of electrostatic sieving and magnetic separation for collecting a specific size range and mineral composition from lunar soil that optimizes subsequent chemical processing. While earlier works focused on silt-sized particles, this work expands that range up to medium-grained sand with a greater variety of potential lunar regolith compositions. This work shows that a 2.5 kV, 7 Hz to 30Hz frequency, single-phase square wave can lift silt and fine sand for collection. This lifting is successful directly from …

Kinetic Modeling Of Electrostatic Sieving For Lunar Regolith Beneficiation: Case Studies, Easton Ingram, Emmanuela Amen Eze, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

A new kinetic particle modeling framework was developed to investigate electrostatic transport of lunar regolith particles with applications to the concept of electrostatic sieving. The new approach is based on kinetic particle dynamics and includes major modules of sampling the particle size distribution, solving electric fields, and tracking motion of charged dust grains. Case studies for a concept of electrostatic sieving were chosen to validate the new model. The simulation achieved similar yields reported in previous works, which served as validation of the model. The new model is computationally efficient and could serve as a design, analysis, and optimization tool.

Effect Of A Geothermal Heat Pump System On Cooling Residential Buildings In A Hot, Dry Climate, Rania Rushdy Moussa, Ayman H. Mahmoud

Architectural Engineering

ABSTRACT In the last century, electricity demand has doubled due to urban expansion, which has contributed to the formation of more urban heat islands (UHI) and the appearance of environmental hazards such as the global climate change phenomenon. Since residential buildings are considered the main electricity consumer sector in Egypt, they consume up to 42% of total energy consumption, which contributes to increasing temperatures and constitutes UHI in cities. In this context, the research aims to examine the effectiveness of using the closed vertical loop geothermal system (GSHPCV) for cooling residential buildings in a hot, dry climate, such as Cairo, …

Trumpet Directivity From A Rotating Semicircular Array, Samuel D. Bellows, Joseph E. Avila, Timothy W. Leishman

Directivity

The directivity function of a played musical instrument describes the angular dependence of its acoustic radiation and diffraction about the instrument, musician, and musician’s chair. Directivity influences sound in rehearsal, performance, and recording environments and signals in audio systems. Because high-resolution, spherically comprehensive measurements of played musical instruments have been unavailable in the past, the authors have undertaken research to produce and share such data for studies of musical instruments, simulations of acoustical environments, optimizations of microphone placements, and other applications. The authors acquired the data from repeated chromatic scales produced by a trumpet played at mezzo-forte in an anechoic …

Addressing Low Heat Pump Heating System Sales In The Uk, Ben Costelloe

Articles

The replacement of existing fossil fuel boilers with heat pumps is seen as a key measure in the decarbonisation of heating systems and addressing climate change. This policy however, is currently failing in many Western European states, particularly in the UK. The many reasons for this situation are examined. However, the age of UK housing stock and particularly the high number of dwellings built prior to the introduction of building insulation regulations in 1980, are key. To maintain the running cost of air source heat pumps competitive with those of the gas boilers they generally replace the heat pump lift …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Characterizing Energy Dissipation Of Shallow-Water Wave Breaking In A Storm Surge, Hunter Boswell, Guirong Grace Yan, Wouter Mostert

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

While understanding breaking waves is crucial for the development of parametrizations used in ocean wave modeling for both deep and shallow water, the complete process of wave breaking is not well understood. Here we present direct numerical simulations of two-dimensional solitary waves that shoal and break on a uniform beach in shallow water, with the presence of storm surge represented by an inshore region. The storm surge depth, beach slope, and wave amplitude are varied to study the dependence of energy dissipation in the breaker on wave and bathymetric parameters. We classify wave breaker types and find a separation between …

Gamelan Gong Directivity Dataset, Samuel D. Bellows, Dallin T. Harwood, Kent L. Gee, Micah R. Shepherd

Directivity

No abstract provided.

Kemar Hats Head Orientation Directivity, Samuel D. Bellows, Timothy W. Leishman

Directivity

This directivity data set for a KEMAR head head-and-torso simulator (HATS) includes head orientations in 14 directions in 5° steps starting from 0° to 40° and then in 10° steps from 40° to 90°. The full spherical measurements followed at an a = 0.97 m radius with the mouth aperture at the spherical center. The sampling density and distribution followed the AES 5° dual-equiangular sampling standard, omitting the south pole (θ = 180°). Thus, each spherical directivity assessment included 36 polar-angle θ samples and 72 azimuthal-angle ϕ samples. The presented data include 22 1/3-octave bands, ranging from 80 Hz …

Building Performance - Societal Drive, Programme And Symposium, Joseph Little, Patrick Daly

Articles

Society is increasingly looking at the construction industry to mitigate the environmental crisis and solve the housing crisis through wholesale embrace of three broad sets of challenges. The MSc in Building Performance (Energy Efficiency in Design) (MSc BP(EED)) was created in 2017 to provide significant upskilling in the knowledge, skills, and software applications of building design professionals so that they can meet these challenges, while creating compliant, sustainable, super-low energy, new and renovated buildings. The delivery of the programme supports upskilling of employed building design professionals at Masters level, encouraging a minority to develop their capacity and interest in research …

Investigation Of The Prevalence Of Faults In The Heating, Ventilation, And Air-Conditioning Systems Of Commercial Buildings, Amir Ebrahimifakhar

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This dissertation describes a large-scale investigation of heating, ventilation, and air-conditioning (HVAC) fault prevalence in commercial buildings in the United States. A multi-year dataset with 36,556 pieces of HVAC equipment including air handling units (AHUs), air terminal units (ATUs), and packaged rooftop units (RTUs) was analyzed to determine values for several HVAC fault prevalence metrics. The primary source of data for this study comes from three commercial fault detection and diagnostics (FDD) providers. Since each FDD provider uses different terms to refer to the same fault in an HVAC system, a mapping function was created for each FDD provider’s dataset, …

Effectiveness Of Building Systems Strategies For Mitigation Of Airborne Transmission Of Sars-Cov-2, Meng Kong, Jialei Shen, Bing Dong, Jianshun Jensen Zhang

Mechanical and Aerospace Engineering - All Scholarship

Airborne transmission has been recognized as a major transmission pathway for the infectious disease COVID-19. This study investigated the effectiveness of several indoor air quality (IAQ) control strategies on the mitigation of airborne transmission of SARS-CoV-2, the virus that causes COVID-19. The well-known airborne disease infection risk model (Wells-Riley equation) was used to estimate the infection risk of the SARS-CoV-2 in seven (7) different types of spaces including conference center/ballrooms, hotel bistro//cafeteria, hotel lobby, classrooms (lecture), conference room/small classroom, hotel or cruise ship guest rooms and open plan offices. The IAQ control strategies included increased ventilation rate, improved air distribution …

Leveraging Abet Accreditation To Promote Inclusion Of Noise Control Engineering Concepts In Engineering Programs, Lily M. Wang, Bryan Beamer

Durham School of Architectural Engineering and Construction: Faculty Publications

Accreditation Board for Engineering and Technology, Inc. (ABET) accreditation is an internationally recognized system ensuring consistency and quality in engineering education programs. As a part of ABET accreditation, there is no set requirement for any general engineering program to include noise control engineering concepts in their curricula. However, one of the seven student outcomes that each ABET accredited engineering program must document is their students’ “ability to apply engineering design to produce solutions that meet specified needs with consideration of public health, safety, and welfare…” Controlling noise in the authors’ view is a fundamental strategy for protecting workers from occupational …

Semi Open Partitions: A Defense Strategy For Airborne Disease, Kerrie Marshall, Arik Palileo, Eric A. Schiff

SyracuseCoE Research Brief Series

This brief summarizes research on two measures that reduce the risk of transmitting COVID-19 from an infected person to a virus-free individual. Semi-partitioned spaces can reduce airborne disease transmission when combined with a proper ventilation flow pattern in a room. With advanced displacement ventilation risk can be reduced by at least 4 times.

Ventilation & Masks: Reducing Airborne Transmission Of Covid-19 In A Classroom, Eric A. Schiff

SyracuseCoE Research Brief Series

We've calculated the number of COVID-19 infections that will be spread from a single COVID-19 "superspreader" to students and teachers in a classroom shared for 4 hours in different ventilation and masking conditions.

Arising: Hurricane (Superstorm) Sandy’S Impact On Design/Planning Professionals, Maxinne R. Leighton

Antioch University Dissertations & Theses

Standing by my bedroom window, looking out at the ocean, a huge wave comes and swallows up my building. Everything around me is gone, including me. I wake up. I am 13 years old and living in the Coney Island Houses on Surf Avenue, Brooklyn, New York. With ongoing anthropogenic changes to the natural environment such as sea level rise and intensifying storms, coastal communities, especially ones segregated by class and culture, are particularly vulnerable in this context that challenges a way of life, and in some instances, threatens that life's survival. This dissertation focuses specifically on what one massive …

Average Speech Directivity, Samuel D. Bellows, Claire M. Pincock, Jennifer K. Whiting, Timothy W. Leishman

Directivity

Speech directivity describes the angular dependence of acoustic radiation from a talker’s mouth and nostrils and diffraction about his or her body and chair (if seated). It is an essential physical aspect of communication affecting sounds and signals in acoustical environments, audio, and telecommunication systems. Because high-resolution, spherically comprehensive measurements of live, phonetically balanced speech have been unavailable in the past, the authors have undertaken research to produce and share such data for simulations of acoustical environments, optimizations of microphone placements, speech studies, and other applications. The measurements included three male and three female talkers who repeated phonetically balanced passages …

Quantification Of Heat Flows Through Building Entrance Doors On A Winter Day, Daeho Kang

Publications and Research

The current methods for the prediction of the heat flow through building entrance doors have been used for years while involved with a certain degree of uncertainty. This paper describes an experimental method that accurately quantified such heat flow. The experiment monitored local environmental parameters in a college building on a cold winter day. The results of the experiment demonstrated that the experimental method is viable to accurately estimate the heat flow throughout the entrance doors and the presence of a vestibule moderated heat losses from the conditioned area. The results will be used for validating the existing methods.

Competence Of A Spray Passive Down-Draft Evaporative Cooling (Pdec) System For Space Cooling, Daeho Kang, Richard K. Strand

Publications and Research

A spray PDEC system has been relatively less considered than other passive cooling strategies as one of the viable low-energy solutions in the cooling of buildings while having a great potential in energy savings. This study is intended to evaluate the capability of a spray PDEC system for space cooling. It comprises four simulation scenarios to see the system response and influence of indoor thermal environment when a spray PDEC system is adopted as a primary cooling system in two different climates. The simulation results show that a spray PDEC system causes a substantial variation in the indoor thermal environment …

Analysis Of The System Response Of A Spray Passive Downdraft Evaporative Cooling System, Daeho Kang, Richard K. Strand

Publications and Research

A spray Passive Downdraft Evaporative Cooling (PDEC) system achieves great savings for space cooling and improves indoor environmental quality by supplying a large amount of fresh outdoor air. As previous studies heavily focused on the energy saving capability of a spray PDEC system due to lack of methods for a detailed analysis, the influence of cool humid supply air from a spray PDEC system in a space in buildings has not been comprehensively studied. This study is intended to evaluate the competence of a spray PDEC system as a primary cooling system in typical spaces in a primary school building …

Ua1c2/37 Facilities Services & Heating Plant Photos, Wku Archives

WKU Archives Collection Inventories

Images of Facilities Services and the Heating Plant.

Ua66/9/1 Ogden College Of Science & Engineering Engineering Administration, Wku Archives

WKU Archives Collection Inventories

No abstract provided.

Ua66/1/5 Ogden College Of Science & Engineering Dean's Office Centers, Wku Archives

WKU Archives Collection Inventories

Records created by and about centers associated with the Dean's office in the Ogden College of Science & Engineering.

Ua66/2 Ogden College Of Science & Engineering Architectural & Manufacturing Sciences, Wku Archives

WKU Archives Collection Inventories

Records created by the Architectural & Manufacturing Sciences.

Files are arranged in the following subseries:

1. Administration
2. Publications
3. Centers & Institutes

What Is A Bim Design Model?, James Peters, Malachy Mathews

Conference papers

The recent report into Building Information Management or BIM, by construction law experts May Winfield and Sarah Rock entitled “Winfield Rock Report” [1] gives reason to state that the UK architectural, engineering and construction industry or AEC, is hindered by the absence of a clear definition of Level 2 BIM. The ISO 19650-2 standard published in 2019, is based upon PAS1192-2:2013. The intent of ISO 19650-2 is to provide a road map to facilitate the standardisation of BIM process in a uniformed fashion. A key pillar of ISO 19650 is the “information cycle” and central to this is a federated …

Development Of A Model To Predict The Likelihood Of Complaints Due To Assorted Tone-In-Noise Combinations, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper develops a model to predict if listeners would be likely to complain due to annoyance when exposed to a certain noise signal with a prominent tone, such as those commonly produced by heating, ventilation, and air-conditioning systems. Twenty participants completed digit span tasks while exposed in a controlled lab to noise signals with differing levels of tones, ranging from 125 to 1000 Hz, and overall loudness. After completing the digit span tasks under each noise signal, from which task accuracy and speed of completion were captured, subjects were asked to rate level of annoyance and indicate the likelihood …

Performance Control Of A Spray Passive Down-Draft Evaporative Cooling System, Daeho Kang, Richard K. Strand

Publications and Research

A spray passive down-draft evaporative cooling system has been regarded as a low-energy cooling system that leads significant energy savings in the cooling of buildings. While the energy saving capability of the system has been proven, the ability to control a comfortable indoor environment is still inadequate due to strong climatic dependency. This study seeks viable solutions to advance the control competence of the system by mitigating critical problems of the system to be a reliable cooling application in the cooling of buildings. It proposes potential control strategies for the system and alternative operations. It develops a control algorithm for …

Design Prototyping Methods: State Of The Art In Strategies, Techniques, And Guidelines, Bradley Camburn, Vimal Viswanathan, Julie Linsey, David Anderson, Daniel Jensen, Richard Crawford, Kevin Otto, Kristin Wood

Faculty Publications, Mechanical Engineering

Prototyping is interwoven with nearly all product, service, and systems development efforts. A prototype is a pre-production representation of some aspect of a concept or final design. Prototyping often predetermines a large portion of resource deployment in development and influences design project success. This review surveys literature sources in engineering, management, design science, and architecture. The study is focused around design prototyping for early stage design. Insights are synthesized from critical review of the literature: key objectives of prototyping, critical review of major techniques, relationships between techniques, and a strategy matrix to connect objectives to techniques. The review is supported …