Mechanical Engineering Commons^™

Shear Driven Micro-Fluidic Pump, Nihad E. Daidzic

Aviation Department Publications

United States Patent, Patent Number US 9,528,503 B2, Date of Patent December 27, 2016.

An example includes an apparatus to pump a fluid. The apparatus includes a housing extending along a length defining an elongate interior, an actuator in the housing, conforming to the elongate interior, the actuator including a plurality of lumens, each having a length extending substantially parallel to the elongate interior, each from around 10 to 200 micrometers across and an actuator configured to oscillate the actuator in the actuator houslng along the length of the elongate interior with a rate differential between movement in a first …

Effect Of Amino-Functionalization On Insulin Delivery And Cell Viability For Two Types Of Silica Mesoporous Structures, Abdollah Zakeri Siavashani, Masoumeh Haghbin Nazarpak, Fateme Fayyazbakhsh, Tayebeh Toliyat, Steven James Peter Mcinnes, Mehran Solati-Hashjin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Inorganic Mesoporous Structures Are a Class of Novel Biomaterials that Have Shown Practical Applications in Delivery of a Variety of Therapeutic Agents. in the Present Study, Two Mesoporous Structures Were Prepared, and the Effect of Surface Modification on their Insulin Delivery and in Vitro Cytotoxicity Was Evaluated. Morphological and Structural Characterizations of Silica Particles Were Accomplished by Different Analytical Techniques, Including Scanning Electron Microscopy, X-Ray Diffraction, Fourier Transform Infrared Spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET) Surface Area Analyses. the Drug Loading Capacity and in Vitro Drug Release Behavior of Silica Structures Were Investigated under Simulated Gastrointestinal Conditions and Phosphate-Buffered Saline Solution …

Finite Element Simulation Of Pzt-Aided Interrogation Of Composite Laminates Exhibiting Damage, Amany Micheal, Yehia Bahei-El-Din

Centre for Advanced Materials

Piezoelectricity has proved effective in capturing changes in structures caused by various damage mechanisms. In one approach, piezoelectric wafer active sensors (PWAS) are mounted on the surface of the host structure and utilized as both actuators and sensors to interrogate the structure and monitor its health. This is achieved by subjecting the PWAS to a transient electric pulse and reading the resulting voltage. Changes in the stiffness of the substrate due to structural damage affect the response of the PWAS, which could be correlated to integrity of the structure. Applying this technique to fibrous composite laminates encounters particular challenges due …

Investigation Of Low Reynolds Number Flow And Heat Transfer Of Louvered Surfaces, Pradeep R. Shinde

FIU Electronic Theses and Dissertations

This study focuses on the investigation of flow behavior at low Reynolds numbers by the experimental and numerical performance testing of micro-channel heat exchangers. An experimental study of the heat transfers and pressure drop of compact heat exchangers with louvered fins and flat tubes was conducted within a low air-side Reynolds number range of 20 < Re_Lp < 225. Using an existing low-speed wind tunnel, 26 sample heat exchangers of corrugated louver fin type, were tested. New correlations for Colburn j and Fanning friction f factor have been developed in terms of non-dimensional parameters. Within the investigated parameter ranges, it seems that both the j and f factors are better represented by two correlations in two flow regimes (one for Re_Lp = 20 – 80 and one for Re_Lp = 80 – 200) than a single regime correlation in the power-law format. The results support the conclusion that airflow and heat transfer at very low Reynolds numbers behaves differently from that …

Optimizing The Telescope Assembly Alignment Simulator For Sofia, Zoe E. Sharp, Alex Quyenvo, Jennifer Briggs, Brian Eney

STAR Program Research Presentations

The Stratospheric Observatory for Infrared Astronomy (SOFIA) conducts research on a modified Boeing 747sp aircraft. By using a variety of infrared science instruments mounted on a 2.7 meter telescope, researchers can make discoveries about the galactic center, star formation, and various topics associated with a deeper understanding of our universe. To efficiently collect data through the SOFIA instruments, the instruments must be tested and prepared prior to being placed on the aircraft. Therefore, with the use of the Telescope Assembly Alignment Simulator (TAAS), researchers can design and construct improvements needed for these instruments to efficiently perform while in flight. The …

Polynomial Chaos For The Computation Of Annual Energy Production In Wind Farm Layout Optimization, Santiago Padrón, Andrew P.J. Stanley, Jared Thomas, Juan Alonso, Andrew Ning

Faculty Publications

Careful management of wake interference is essential to further improve Annual Energy Production (AEP) of wind farms. Wake effects can be minimized through optimization of turbine layout, wind farm control, and turbine design. Realistic wind farm optimization is challenging because it has numerous design degrees of freedom and must account for the stochastic nature of wind. In this paper we provide a framework for calculating AEP for any relevant uncertain (stochastic) variable of interest. We use Polynomial Chaos (PC) to efficiently quantify the effect of the stochastic variables—wind direction and wind speed—on the statistical outputs of interest (AEP) for wind …

High-Frequency Instabilities Of Stationary Crossflow Vortices In A Hypersonic Boundary Layer, Fei Li, Meelan Choudhari, Pedro Paredes-Gonzalez, Lian Duan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Hypersonic boundary layer flows over a circular cone at moderate incidence angle can support strong crossflow instability in between the windward and leeward rays on the plane of symmetry. Due to more efficient excitation of stationary crossflow vortices by surface roughness, such boundary layer flows may transition to turbulence via rapid amplification of the high-frequency secondary instabilities of finite-amplitude stationary crossflow vortices. The amplification characteristics of these secondary instabilities are investigated for crossflow vortices generated by an azimuthally periodic array of roughness elements over a 7° half-angle circular cone in a Mach 6 free stream. The analysis is based on …

Enhanced Thermal Conductance Of Polymer Composites Through Embedding Aligned Carbon Nanofibers, David S. Wood, Dale K. Hensley, Nicholas A. Roberts

Mechanical and Aerospace Engineering Faculty Publications

The focus of this work is to find a more efficient method of enhancing the thermal conduc-tance of polymer thin films. This work compares polymer thin films embedded with randomly oriented carbon nanotubes to those with vertically aligned carbon nanofibers. Thin films embedded with carbon nanofibers demonstrated a similar thermal conductance between 40–60 µm and a higher thermal con-ductance between 25–40 µm than films embedded with carbon nanotubes with similar volume fractions even though carbon nanotubes have a higher thermal conductivity than carbon nanofibers.

Computational Fluid Dynamic Analysis Of Microbubble Drag Reduction Systems At High Reynolds Number, John D. Goolcharan

FIU Electronic Theses and Dissertations

Microbubble drag reduction (MBDR) is an effective method to improve the efficiency of fluid systems. MBDR is a field that has been extensively studied in the past, and experimental values of up to 80% to 90% drag reduction have been obtained. The effectiveness and simplicity of MBDR makes it a viable method for real world applications, particularly in naval applications where it can reduce the drag between the surface of ships and the surrounding water. A two dimensional single phase model was created in ANSYS Fluent to effectively model the behavior of bubble laden flow over a flat plate. This …

Simulation Model Of An Automatic Commercial Ice Machine, Haithem Murgham, David Myszka, Vijay Bahel, Rajan Rajendran, Kurt Knapke, Suresh Shivashankar, Kyaw Wynn

Mechanical and Aerospace Engineering Faculty Publications

Automatic commercial ice-making machines that produce a batch of cube ice at regular intervals are known as “cubers." Such machines are commonly used in food service, food preservation, hotel, and health service industries. The machines are typically rated for the weight of ice produced over a 24-hour period at ambient air temperatures of 90°F and water inlet temperature of 70°F.

These cubers typically utilize an air-cooled, vapor-compression cycle to freeze circulating water flowing over an evaporator grid. Once a sufficient amount ice is formed, a valve switches to enable a harvest mode, where the compressor’s discharge gas is routed into …

Continuum And Molecular-Dynamics Simulation Of Nanodroplet Collisions, Raunak Bardia, Zhi Liang, Pawel Keblinski, Mario F. Trujillo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Extent to Which the Continuum Treatment Holds in Binary Droplet Collisions is Examined in the Present Work by using a Continuum-Based Implicit Surface Capturing Strategy (Volume-Of-Fluid Coupled to Navier-Stokes) and a Molecular Dynamics Methodology. the Droplet Pairs Are Arranged in a Head-On-Collision Configuration with an Initial Separation Distance of 5.3 Nm and a Velocity of 3 Ms-1. the Size of Droplets Ranges from 10-50 Nm. Inspecting the Results, the Collision Process Can Be Described as Consisting of Two Periods: A Preimpact Phase that Ends with the Initial Contact of Both Droplets, and a Postimpact Phase Characterized by the Merging, …

Nonlinear Analysis Of Balance Data In The Easter Seals Adult Day Services Population, Taylor Marie Schemmel

Honors Theses

81.1 million adults are expected to be affected by dementia in 2040. Individuals with dementia are twice as likely to fall as healthy individuals and three times as likely to sustain an injury during a fall. Unfortunately, current fall prevention techniques in place for cognitively healthy older adults are not as effective for those with dementia. The objective of this study was to examine balance differences between individuals of varying cognitive ability utilizing Easter Seals Adult Day Services. All study participants completed the Montreal Cognitive Assessment (MoCA). Clinical assessments were done in conjunction with static posturography data collection on a …

Mens Doped Adhesive And Influence On Fracture Toughness, Kao Z. Yang

FIU Electronic Theses and Dissertations

Composites are in high demand; however, fasteners are often required for joining process and can reduce their advantages. One solution is adhesive bonding, but uncertainty exists regarding long term durability and the ability to interrogate bonds noninvasively. One potential solution to qualify bond integrity over its service life is to dope an adhesive with magneto-electric nanoparticles (MENs). MENs can yield output magnetic signatures that are influenced by bond quality and damage state. In this study, adhesives have been doped with MENs prior to bonding at 1% volume concentration. For optimum implementation, this health monitoring system should be evaluated for effects …

Sound Attenuation In Amorphous Silica At Frequencies Near The Boson Peak, Zhi Liang, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We Use Molecular Dynamics Phonon Wave Packet (WP) Simulations to Study Acoustic Propagation and Attenuation in Amorphous Silica (A-SiO₂) at Frequencies Near the Boson Peak (BP) Position and Compare Them with the Results of Equilibrium Molecular Dynamics (EMD) Simulations. the Sound Attenuation Coefficients Obtained from WP Simulations Are Generally Consistent with Those from EMD Predictions and Have Reasonable Agreement with the Existing Experimental Data. Near the BP Position, We Found the Frequency-Dependent Sound Attenuation Coefficients for Longitudinal and Transverse Modes Both Follow the Rayleigh-Scattering Fourth Power Law. above the BP Frequency, However, the Propagating Phonon is Essentially Attenuated …

Effect Of Spalled Particles Thermal Degradation On A Hypersonic Flow Field Environment, Raghava S. C. Davuluri, Huaibao Zhang, Alexandre Martin

Mechanical Engineering Faculty Publications

Two-way coupling is performed between a spallation code and a hypersonic aerothermodynamics CFD solver to evaluate the effect of spalled particles on the flow field. Time accurate solutions are computed in argon and air flow fields. A single particle simulations and multiple particles simulations are performed and studied. The results show that the carbon vapor released by spalled particles tend to change the composition of the flow field, particularly the upstream region of the shock.

Nanoionics And Nanocatalysts: Conformal Mesoporous Surface Scaffold For Cathode Of Solid Oxide Fuel Cells, Yun Chen, Kirk Gerdes, Xueyan Song

Faculty & Staff Scholarship

Nanoionics has become increasingly important in devices and systems related to energy conversion and storage. Nevertheless, nanoionics and nanostructured electrodes development has been challenging for solid oxide fuel cells (SOFCs) owing to many reasons including poor stability of the nanocrystals during fabrication of SOFCs at elevated temperatures. In this study, a conformal mesoporous ZrO2 nanoionic network was formed on the surface of La1−xSrxMnO3/yttria-stabilized zirconia (LSM/YSZ) cathode backbone using Atomic Layer Deposition (ALD) and thermal treatment. The surface layer nanoionic network possesses open mesopores for gas penetration, and features a high density of grain boundaries for enhanced ion-transport. The mesoporous nanoionic …

Mechanical And Aerospace Engineering, 2015-2016, College Of Engineering And Applied Sciences

Mechanical and Aerospace Engineering News

• Letter from the Department Chair
• New Faculty
• Student Success
• University NanoSatellite Program P-Spec Mission
• WALI Student Opportunities
• Study of Blind Cane Vibration

Geometric Consideration Of Nanostructures For Energy Storage Systems, Jonghyun Park, Jie Li, Wei Lu, Ann Marie Sastry

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Battery performance and its fade are determined by various aspects such as the transport of ions and electrons through heterogeneous internal structures; kinetic reactions at the interfaces; and the corresponding interplay between mechanical, chemical, and thermal responses. The fundamental factor determining this complex multiscale and multiphysical nature of a battery is the geometry of active materials. In this work, we systematically consider the tradeoffs among a selection of limiting geometries of media designed to store ions or other species via a diffusion process. Specifically, we begin the investigation by considering diffusion in spheres, rods, and plates at the particle level, …

Silicon-Wall Interfacial Free Energy Via Thermodynamics Integration, Wan Shou, Heng Pan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We compute the interfacial free energy of a silicon system in contact with flat and structured walls by molecular dynamics simulation. The thermodynamics integration method, previously applied to Lennard-Jones potentials [R. Benjamin and J. Horbach, J. Chem. Phys. 137, 044707 (2012)], has been extended and implemented in Tersoff potentials with two-body and three-body interactions taken into consideration. The thermodynamic integration scheme includes two steps. In the first step, the bulk Tersoff system is reversibly transformed to a state where it interacts with a structureless flat wall, and in a second step, the flat structureless wall is reversibly transformed into an …

Constructal Alkaline Membrane Fuel Cell (Amfc) Design, E. M. Sommer, J. V. C. Vargas, Lauber De Souza Martins, J. C. Ordonez

Faculty Publications

This paper introduces a structured procedure to optimize the internal structure (relative sizes, spacing) and external shape (aspect ratios) of a single alkaline membrane fuel cell so that net power is maximized. The optimization of flow geometry is conducted for the smallest (elemental) level of a fuel cell stack, i.e., the single alkaline membrane fuel cell, which is modeled as a unidirectional flow system. The polarization curve, total and net power, and efficiency are obtained as functions of temperature, pressure, electrolyte solution concentration (KOH), geometry and operating parameters. The optimization is subjected to fixed total volume. There are two levels …

Experimental Validation Data For Cfd Of Forced Convection On A Vertical Flat Plate, Jeff R. Harris, Blake W. Lance, Barton L. Smith

Mechanical and Aerospace Engineering Faculty Publications

A CFD validation data set for turbulent forced convection on a vertical plate is presented. The design of the apparatus is based on recent validation literature and provides a means to simultaneously measure boundary conditions and system response quantities. All important inflow quantities for RANS CFD are also measured. Data are acquired at two heating conditions and cover the range 40;000 < Rex < 300;000, 357 < Red2 < 813 and 0:02 < Gr/Re2 < 0:232. The data and uncertainties are contained in files in the supplemental material

Ionic And Electronic Conductivities Of Atomic Layer Deposition Thin Film Coated Lithium Ion Battery Cathode Particles, Rajankumar L. Patel, Jonghyun Park, Xinhua Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

It is imperative to ascertain the ionic and electronic components of the total conductivity of an electrochemically active material. A blocking technique, called the “Hebb-Wagner method”, is normally used to explain the two components (ionic and electronic) of a mixed conductor, in combination with the complex ac impedance method and dc polarization measurements. CeO₂ atomic layer deposition (ALD)-coated and uncoated, LiMn₂O₄ (LMO) and LiMn_1.5Ni_0.5O₄ (LMNO) powders were pressed into pellets and then painted with silver to act as a blocking electrode. The electronic conductivities were derived from the currents obtained using …

Backward Dijkstra Algorithms For Finding The Departure Time Based On The Specified Arrival Time For Real-Life Time-Dependent Networks, Gelareh Bakhtyar, Vi Nguyen, Mecit Cetin, Duc Nguyen

Civil & Environmental Engineering Faculty Publications

A practical transportation problem for finding the “departure” time at “all source nodes” in order to arrive at “some destination nodes” at specified time for both FIFO (i.e., First In First Out) and Non-FIFO “Dynamic ” Networks is considered in this study. Although shortest path (SP) for dynamic networks have been studied/documented by various researchers, contributions from this present work consists of a sparse matrix storage scheme for efficiently storing large scale sparse network’s connectivity, a concept of Time Delay Factor (TDF) combining with a “general piece- wise linear function” to describe the link cost as a function of time …