Materials Science and Engineering Commons^™

Polyesters Derived From Biobased 1,5-Pentanediol For Coatings, Adhesives, And Biodegradable Plastics, Lei Zheng

Doctoral Dissertations

Biomass-derived polymers are drawing increased attention from researchers due to unique performance attributes, potential for biodegradability, new low-cost feedstocks, and improved sustainability. Biobased feedstocks are employed in both major applications of polymers thermosets and thermoplastics. For thermoset coatings and adhesives, biobased resins such as biobased alkyds, epoxy resins, benzoxazine resins, starch derivatives, and proteins from plants and animals, are promising candidates to replace petroleum-derived counterparts. Thermoplastics such as polyethylene are mainly produced from fossil resources, generally have poor degradability and are difficult to effectively recycle. Currently, in the United States, less than 10% plastics are recycled, and more than 70% …

Polymer Based Energy Storage And Thermal Management On Textile Devices, Wesley A. Viola

Doctoral Dissertations

Humans developed textiles to manage thermal energy transfer with the environment and support homeostasis in a wide range of climates. With the anticipation of wearable technologies to transform healthcare via early, pre-symptomatic detection of illness, there is now a demand for electrical energy storage to support such on-body devices. Finding energy materials to merge seamlessly with textiles is basic requirement to ensure widespread adoption of wearable health monitors. Here we use a vapor deposition process to conformally coat ordinary fabrics with the doped conjugated polymer poly(3,4 ethylenedioxythiophene) (PEDOT-Cl), a soft material which possesses electronic and redox capabilities. We demonstrate PEDOT-Cl …

Effect Of Chemical Identity And Morphology On Amphiphilic-Zwitterionic Block Copolymer Membranes, Ria Ghosh

Doctoral Dissertations

Amphiphilic block copolymers have gained a broad research interest attributed to their self-assembly properties over a range of pH, temperature, and ionic strength. Polyzwitterions have attracted special attention due to their hydrophilicity, charge sensitivity and coulombic attraction of the opposite charges over a range of environments making them a popular material of study in the field of stimuli responsive systems, for example in self-healing hydrogels, and water transport membranes. Combining the stimuli responsiveness and higher hydrophilicity of zwitterionic polymers with self-assembly behavior of amphiphilic block copolymers created an interest to study the effect of composition and identity of the zwitterionic …

Synthesis And Assembly Of Polymer Materials At Interfaces, Xiaoshuang Wei

Doctoral Dissertations

The overarching goal of the thesis is to understand growth and assembly of polymer materials at interfaces. Chapter 2 and Chapter 3 study simultaneous polymer growth and assembly at fluid interfaces, where in-situ photopolymerization and vapor phase deposition were utilized to grow polymers, respectively. Chapter 4 leverages capillary condensation to pattern polymer growth at solid substrates. Chapter 1 provides background information on polymer materials at interfaces, and vapor phase deposition method (initiated chemical vapor deposition, iCVD) to grow polymers. This chapter also reviews polymer thin film wetting, and colloidal assemblies at interfaces. In Chapter 2, we demonstrate the preparation …

Frontiers In The Self-Assembly Of Charged Macromolecules, Khatcher O. Margossian

Doctoral Dissertations

The self-assembly of charged macromolecules forms the basis of all life on earth. From the synthesis and replication of nucleic acids, to the association of DNA to chromatin, to the targeting of RNA to various cellular compartments, to the astonishingly consistent folding of proteins, all life depends on the physics of the organization and dynamics of charged polymers. In this dissertation, I address several of the newest challenges in the assembly of these types of materials. First, I describe the exciting new physics of the complexation between polyzwitterions and polyelectrolytes. These materials open new questions and possibilities within the context …

Functional Bottlebrush Polymer Additives For Thin Films And Coatings, Travis S. Laws

Doctoral Dissertations

Bottlebrush polymers are a class of highly branched polymers consisting of polymeric side chains that are densely grafted to a linear backbone. Their highly branched architecture results in surface enrichment across a broad range of materials. The goal of my research has been centered around the design of functional bottlebrush polymers and their use as surface active additives in blend films and coatings.

In the first chapter, we examine the segregation behavior of polystyrene bottlebrushes that are blended with linear polystyrene. We systematically vary the lengths of the bottlebrush backbone (Nb), side-chain (Nsc), and the linear matrix (Nm) in order …

Oligodimethylsiloxanes With Charged Chain Ends: Synthesis, Characterization, And Properties, Tianyu Li

Doctoral Dissertations

Charged polymers have been intensively studied because of their scientific and industrial importance. In certain cases, a single charged group in the chain end can alter the structure and properties of a polymer dramatically. On the other hand, oligomers, which are different from both discrete small molecules and higher molecular weight polymers, have become an emergent class of materials. There are several charged chain-end functionalized oligomers reported, but this area has been largely unexplored. The work described in this dissertation is aimed at using well-characterized end-group functionalized oligodimethylsiloxane (oDMS) as model materials to understand the effects of charged end groups …

New Isomeric Silicones: Synthesis, Compositions And Surface Properties, Yan Cong

Doctoral Dissertations

This dissertation presents research performed in the field of silicone polymer science, which refers to polymers with alternating silicon-oxygen backbones. Three research topics will be explored. The first topic involves the synthesis of trimethylsiloxysilsesquioxane (MT) copolymers with vinyl and hydride functionalities as reactive liquid silicone precursors. The second topic describes titration of dimethylsiloxy (D) composition into trimethylsiloxysilsesquioxane (MT) copolymers for the purpose of controlling the mechanical properties and thermal stabilities of the material. The last topic explores the modification of hydrophobic silicone surfaces with oxygen plasma to form silica-like, hydrophilic surfaces and the behaviors of hydrophobic recovery. The first chapter …

Development Of Crosslinking Technologies For Waterborne & Powder Coatings, Mengfei Huang

Doctoral Dissertations

Waterborne coatings and powder coatings are fast-growing sectors of the world coating market due to their environmentally friendliness as they have low or zero volatile organic compounds (VOCs) emission. However, compared with solventborne coatings, significant limitations need to be overcome to enable their broad applications. My dissertation will discuss several novel crosslinking strategies for waterborne and powder coating that could enable curing on-demand at ambient conditions, with facile polymerization and easy processing, and ultimately, exhibit a high degree of crosslinking and excellent performance that is comparable to solventborne coatings. We introduced and demonstrated the anionic polymerization mechanism and the high …

Structural Stability Of Thermosets During Material Extrusion Additive Manufacturing, Stian K. Romberg

Doctoral Dissertations

Over the past decade, the scale of polymer additive manufacturing has been revolutionized with machines that print massive thermoplastic parts with greater geometric complexity than can be achieved by traditional manufacturing methods. However, the heat required to print thermoplastics consumes energy and induces thermal gradients that can reduce manufacturing flexibility and final mechanical properties. With the ability to be extruded at room temperature and excellent compatibility with fibers and fillers, thermoset resins show promise to decrease the energy consumption, expand the manufacturing flexibility, and broaden the material palette offered by large-scale polymer additive manufacturing. However, structural instability in the uncured …

Advanced Materials Design Using Application-Based Processing Techniques, Daniel S. Camarda

Doctoral Dissertations

This dissertation pertains to generating advanced materials using application-based processing techniques. First, billets consisting of PTFE sintering powders are evaluated using Thermomechancal Analysis. It was found that both shape change and volume change are associated with enthalpic and entropic recoil, respectively. These phenomena, due to melting and stored energy during the powder compaction process, were found to be molecular weight dependent. Additionally, kinetics of the recovery and sintering process were found to be slower in blended specimens than pure samples. Next, the creation of graft copolymers by selectively grafting a second polymer to the amorphous fraction of a semi-crystalline polymer …

Characterization Techniques And Cation Exchange Membrane For Non-Aqueous Redox Flow Battery, Kun Lou

Doctoral Dissertations

The motivation of this work comes from one of the major problems of emerging non-aqueous flow battery (NAFB) that a separator or membrane which facilitates conductivity and blocks redox species crossover does not exist. Although many aspects of principles can be mirrored from mature fuel cell and aqueous flow battery, it is found that some well-defined membrane properties in aqueous systems such as swelling, transport and interactions are different in non-aqueous solvents to some extent. However, the approach of this work does follow the way perfluorosulfonate ion exchange membrane (PFSA) facilitated development of fuel cell and aqueous flow battery in …

Direct Printing/Coating/Plating Of Key Components For Electronic Devices, Xiyu Hu

Doctoral Dissertations

Miniaturization has been a technological trend for several decades for electronic devices. From the practical point of view, the successful miniaturization of fully integrated systems mainly depends on their components. This dissertation examines the inkjet printing of copper oxide inks on flexible substrates for applications in microfluidic valving systems. We expand the knowledge of low-cost and high-performance electrowetting valves and fabricate the microfluidic device for fluidic control, which is necessary to enable the next-generation microfluidic devices. In addition, we also study the electromagnetic interference (EMI) shielding material, which is a crucial part of electronic devices. The basic theory of EMI …

Surface Modification Of Cellulose Nanocrystals: Imparting Non-Native Properties On Sustainable Substrates, Allen C. Chang

Doctoral Dissertations

Governments and scientists all over the planet have recognized the importance of pursuing and achieving sustainability. As the human population grows and technologies advance, the planet’s limited resources become less and less able to support our taxing demands. In 2015, the United Nations set forth 17 Sustainable Development Global Goals. Goal 12 “Responsible Production and Consumption” can be addressed quite readily by the integration of sustainable materials into advanced technologies; however, such materials have yet to be developed. Cellulose nanocrystals (CNCs) – an abundant, well-known sustainable nanomaterial hydrolyzed from bulk cellulose with high surface functionality and high strength properties – …

Stretching The Applications Of Biomass: Development Of Lignin Based Thermoplastic Elastomers And Composite Materials, Anthony Stephen Bova

Doctoral Dissertations

Bio-based plastics and composites have seen increased industry adoption in recent years due to growing demand for materials with a low carbon footprint. The use of lignin as a feedstock for polymers has seen growing interest as the concept of an integrated cellulosic biorefinery gains traction and advances the need to use all components of separated biomass for value-added applications. Historically, use of lignin in thermoplastic and elastomeric copolymers and blends has been bottlenecked by the inability to introduce lignin content above 30 weight percent due to difficulties with interfacial adhesion of lignin with other soft segments. Efforts to overcome …

Nano- And Micro-Structured Temperature-Sensitive Hydrogels For Rapidly Responsive Devices, Qi Lu

Doctoral Dissertations

This thesis aims to extend the understanding and explore the application of temperature-responsive hydrogel systems by integrating microelectromechanical systems (MEMS). Stimuli-responsive hydrogel systems are immensely investigated and applied in numerous fields, and interfacing with micro- and nano-fabrication techniques will open up more possibilities. In Chapter 2, the first biologically relevant, in vitro cell stretching device based on hydrogel surface instability was developed. This dynamic platform is constructed by embedding micro-heater devices under temperature-responsive surface-attached hydrogels. The fast and regional temperature change actuates the stretching and relaxation of the seeded human artery smooth muscle cell (HASMC) via controllable surface creasing instability. …

Characterizing Non-Linear Structural, Mechanical, And Volumetric Properties Of Aliphatic And Aromatic Thermosets, Brendan Robert Ondra

Doctoral Dissertations

A unifying theme throughout this dissertation employs advanced experimental mechanics, including the design and development of new instruments, testing techniques, and analysis strategies. Chapter 1 covers the design and development of a new instrument for polymer and composite characterization. More specifically, a bi-fluidic, confining-fluid, pressurizable dilatometer (referred to herein as the BFCF-PVT). Whereas both classical and contemporary confining-fluid type pressurizable dilatometers utilize a bellows and / or piston system along with a Linear Variable Displacement Transducer to apply pressure and track volume changes, the BFCF-PVT that was designed and built utilizes a fluid-fluid interface (composed of two immiscible fluids that …

Surface Driven Flows : Liquid Bridges, Drops And Marangoni Propulsion, Samrat Sur

Doctoral Dissertations

Molecules sitting at a free liquid surface against vacuum or gas have weaker binding than molecules in the bulk. The missing (negative) binding energy can therefore be viewed as a positive energy added to the surface itself. Since a larger area of the surface contains larger surface energy, external forces must perform positive work against internal surface forces to increase the total area of the surface. Mathematically, the internal surface forces are represented by surface tension, defined as the normal force per unit of length. One common manifestation of surface tension is the difference in pressure it causes across a …

Top-Down And Bottom-Up Fabrication Of Key Components In Miniature Energy Storage Devices, Wenhao Li

Doctoral Dissertations

The advent of miniature electronic devices demands power sources of commensurate form factors. This spurs the research of micro energy storage devices, e.g., 3D microbatteries. A 3D microbattery contains nonplanar microelectrodes with high aspect ratio and high surface area, separated by a nanoscale electrolyte. The device takes up a total volume as small as 10 mm³, allowing it to serve on a chip and to provide power in-situ. The marriage of nanotechnology and electrochemical energy storage makes microbattery research a fascinating field with both scientific excitement and application prospect. However, successful fabrication of well-functioned key components …

Bioinspired Complex Nanoarchitectures By Dna Supramolecular Polymerization, Laura A. Lanier

Doctoral Dissertations

Bioinspired nanoarchitectures are of great interest for applications in fields such as nanomedicine, tissue engineering, and biosensing. With this interest, understanding how the physical properties of these complex nanostructures relate to their function is increasingly important. This dissertation describes the creation of complex nanoarchitectures with controlled structure and the investigation of the effect of nanocarrier physical properties on cell uptake for applications in nanomedicine. DNA self-assembly by supramolecular polymerization was chosen to create complex nanostructures of controlled architectures. We demonstrated that the supramolecular polymerization of DNA known as hybridization chain reaction (HCR) is in fact a living polymerization. The living …

Engineering Nanomaterials For Imaging And Therapy Of Bacteria And Biofilm-Associated Infections, Akash Gupta

Doctoral Dissertations

Infections caused by multidrug-resistant (MDR) bacteria pose a serious global burden of mortality, causing thousands of deaths each year. The “superbug” risk is further exacerbated by chronic infections generated from antibiotic-resistant biofilms that are highly resistant to available treatments. Synthetic macromolecules such as polymers and nanoparticles have emerged as promising antimicrobials. Moreover, ability to modulate nanomaterial interaction with bacterial cellular systems plays a pivotal role in improving the efficacy of the strategy. In the initial studies on engineering nanoparticle surface chemistry, I investigated the role played by surface ligands in determining the antimicrobial activity of the nanoparticles. In further study, …

Amorphous-Crystalline Brush Block Copolymers: Phase Behavior, Rheology And Composite Design, Gayathri Kopanati

Doctoral Dissertations

Bottlebrush block copolymers are polymers with chemically distinct polymer side chains grafted onto a common backbone. The unique architecture induced properties make these materials attractive for applications such as photonic materials, stimuli responsive actuators and drug delivery vehicles to name a few. This dissertation primarily investigates the phase transitions and rheological behavior of amorphous-crystalline bottlebrush brush block copolymers and their composites. The temperature induced phase behavior is investigated using time resolved synchrotron X-ray source. Irrespective of volume fraction and backbone length, the samples display strong segregation even at high temperatures (200 °C) and there is no accessible order-disorder transition in …

Polymeric Impulsive Actuation Mechanisms: Development, Characterization, And Modeling, Yongjin Kim

Doctoral Dissertations

Recent advances in the field of biomedical and life-sciences are increasingly demanding more life-like actuation with higher degrees of freedom in motion at small scales. Many researchers have developed various solutions to satisfy these emerging requirements. In many cases, new solutions are made possible with the development of novel polymeric actuators. Advances in polymeric actuation not only addressed problems concerning low degree of freedom in motion, large system size, and bio-incompatibility associated with conventional actuators, but also led to the discovery of novel applications, which were previously unattainable with conventional engineered systems. This dissertation focuses on developing novel actuation mechanisms …

Double-Network Materials Via Frontal Polymerization & Supercritical Co2 Processing, Matthew Joseph Lampe

Doctoral Dissertations

This dissertation presents work focused on producing materials in non-equilibrium states by taking advantage of novel processing techniques. First, epoxy-based resins which can undergo radically promoted, cationic, thermal, frontal polymerization are investigated for their potential use as adhesives. These resins are found to be capable of sustaining propagating polymerization fronts between several different substrate materials, resulting in high levels of adhesion in some cases. In addition, a similar frontal resin was developed that can undergo sequential gelation and frontal polymerization. The gels are formed by radically crosslinking acrylate monomers within the epoxy resin. These gels can then be manipulated, and …

Rheological Investigations Of Self-Assembled Block Copolymer Nanocomposites With Complex Architectures, Benjamin Yavitt

Doctoral Dissertations

The self-assembly of block copolymers (BCP) into microphase separated structures is an attractive route to template and assemble functional nanoparticles (NP) into highly ordered nanocomposites and is central to the “bottom up” fabrication of future materials with tunable electronic, optical, magnetic, and mechanical properties. The optimization of the co-assembly requires an understanding of the fundamentals of phase behavior, intermolecular interactions and dynamics of the polymeric structure. Rheology is a novel characterization tool to investigate these processes in such systems that are not accessible by other means. With the combination of X-ray scattering techniques, structure-property relationships are determined as a function …

Chemical Stability And Performance Influence Of Choice Substituents And Core Conjugation Of Organic Semiconductors, Jack Ly

Doctoral Dissertations

Realizing organic based active materials for electronic devices, such as thin film transistors and photovoltaics, has been long sought after. Advancement in the field driven by chemists, engineers, and physicists alike have bolstered organic based semiconductor performance levels to rival those of traditional inorganic amorphous silicon-based devices. Within the field of organic semiconductors (OSC), two categories of active materials may be generalized: (1) polymer and (2) small molecule semiconductors. Each class of OSC inherently have their own advantages and disadvantages. Polymer semiconductors (PSC) allow a wide range in tunability via choice monomers and side chain engineering to illicit desirable energy …

Direct Printing Of Conductive Inks For Organic Electronics And Wearable Microfluidics, Aditi Naik

Doctoral Dissertations

This dissertation examines the direct printing of conductive inks on polymeric substrates for applications in organic electronics, microfluidic valving systems, and wearable sweat sensors. The inexpensive production of solution-based electrodes with high electrical conductivity is necessary to enable the next-generation of printed, flexible, and organic electronics. Specifically, the optimization and printing of liquid-phase graphene ink and nanoparticle-based silver ink by soft nanoimprint lithography and inkjet-printing is discussed to achieve printed functional devices. Using scalable low-cost patterning systems, these flexible applications are compatible with roll-to-roll processing, enabling large-scale manufacturing. This research expands the knowledge of high-resolution printing optimization for the direct …

Swelling Induced Deformation Of Thermally Responsive Hydrogels, Ying Zhou

Doctoral Dissertations

Hydrogels are crosslinked polymeric networks imbibed with aqueous solutions. They undertake dramatic volume changes through swelling and deswelling processes, which can be stimulated by factors like temperature, pH or different chemicals. These unique properties render hydrogels particularly interesting for shape morphing related applications. In this thesis, we focus on the swelling induced deformation of thermally responsive hydrogels with lower critical solution temperatures (LCSTs), including poly(N-isopropylacrylamide) (PNIPAm) and poly(N,N-diethylacrylamide) (PDEAm). Particularly, benzophenone containing monomers are copolymerized with NIPAm or DEAm to create photocrosslinkable temperature-responsive polymers, which allows fabrication of hydrogels with controlled shapes and crosslinking …

Self-Assembling Networks In Soft Materials, Ishan Prasad

Doctoral Dissertations

This dissertation presents a study on heterogeneous network structure in two distinct classes of soft material systems: disordered assemblies of jammed binary spheres and ordered morphologies of block copolymer melts. The aim is to investigate the combined role of geometry and entropy in structure formation of soft matter assemblies. First, we investigate the influence of particle size asymmetry on structural properties of jammed binary sphere mixtures. We give evidence of two distinct classes of materials separated by a critical size ratio that marks the onset of a sharp transition due to simultaneous jamming of a sub-component of the packing. We …

The Role Of Chain Configuration In Governing The Rational Design Of Polymers For Adhesion, Onyenkachi Wamuo

Doctoral Dissertations

ABSTRACT THE ROLE OF CHAIN CONFIGURATION IN GOVERNING THE RATIONAL DESIGN OF POLYMERS FOR ADHESION SEPTEMBER 2017 ONYENKACHI C. WAMUO, B.Eng., FEDERAL UNIVERSITY OF TECHNOLOGY, OWERRI (FUTO), NIGERIA M.S., UNIVERSITY OF MASSACHUSETTS AMHERST Ph.D., UNIVERSITY OF MASSACHUSETTS AMHERST Directed by: Professor Shaw Ling Hsu The chain configurational control of polymers used in adhesion can be utilized as a means of tuning the cohesive properties of hot melt adhesives (HMAs). The cohesive properties control the solidification, strength, setting speed. Propylene-Ethylene copolymers (PP-co-PE) and thermoplastic polyurethanes (TPUs) were studied. In the first project, the effects of sequence distribution of the two types …