Materials Science and Engineering Commons^™

Microstructure Control And Correlation To Creep Properties In Grade 91 Steel Weldment After Thermo-Mechanical Treatments And An Fe-30cr-3al Alloy Strengthened By Fe2nb Laves Phase, Benjamin Allen Shassere

Doctoral Dissertations

Type IV cracking in weldments of steel pipes after creep deformation is a concern in modern fossil-fueled power plants. Two possible methods for minimizing or eliminating Type IV cracking will be discussed. The first method alters the initial microstructure of typical Grade 91 steel base metal before welding, while the second provides baseline microstructure characteristics and creep performance of a new alloy that is strengthened by the intermetallic Fe2Nb Laves phase. The initial microstructure of the Grade 91 steel can be controlled by Thermo-Mechanical Treatments, which aids in precipitation of fine (5-10 nm) MX particles in austenite before transformation to …

Microstructural Analysis Of Thermoelastic Response, Nonlinear Creep, And Pervasive Cracking In Heterogeneous Materials, Alden C. Cook

Electronic Theses and Dissertations

This dissertation is concerned with the development of robust numerical solution procedures for the generalized micromechanical analysis of linear and nonlinear constitutive behavior in heterogeneous materials. Although the methods developed are applicable in many engineering, geological, and materials science fields, three main areas are explored in this work. First, a numerical methodology is presented for the thermomechanical analysis of heterogeneous materials with a special focus on real polycrystalline microstructures obtained using electron backscatter diffraction techniques. Asymptotic expansion homogenization and finite element analysis are employed for micromechanical analysis of polycrystalline materials. Effective thermoelastic properties of polycrystalline materials are determined and compared …

Theory Of Carrier Transport From First Principles: Applications In Photovoltaic And Thermoelectric Materials, Alireza Faghaninia

McKelvey School of Engineering Theses & Dissertations

New sources of energy that are environmentally friendly, cost-effective, and renewable are essential if we are to combat the effects of global climate change. Two of these sources are solar photovoltaic (PV) cells to convert sunlight into electricity and thermoelectric (TE) devices to convert heat to electricity. To be practical on a large scale, the properties (e.g. electrical conductivity, band gap, Seebeck coefficient, etc) of the the underlying materials must be improved significantly through judicious control of structure and composition. Significant understanding of materials properties is required to design and engineer new high-performing materials. First principles calculations using density functional …

Modeling And Experimental Investigation On The Influence Of Radiation Defects On Helium Behavior In Bcc Iron, Zuya Huang

Masters Theses

Fe-based alloys are important structural materials for both fission and fusion energy. For fusion applications, the challenges of radiation-induced changes in microstructure, properties and performance is further challenged by the concomitant production of helium from (n, alpha) nuclear reactions and fusion reactions. Due to the lack of a volumetric, high flux 14-MeV neutron source, studying these phenomena require the use of computational materials modeling and novel experimental methods. In this thesis, molecular dynamics (MD) simulations was used to investigate the synergistic interactions of helium with prismatic dislocation loops characteristic of those observed in neutron irradiated iron to determine how the …

Integrated Solar Technologies With Outdoor Pedestrian Bridge Superstructure Decking, Richard K. Racz

Masters Theses

Solar technology has been a major topic in sustainable design for many years. In the last five years, however, the solar technology industry has seen a rapid growth in installations and technological advances in cell design. Combined with a rapidly declining overall system cost, the idea of introducing solar technology into a wider range of applications is becoming a focus for engineers and scientists around the world. So many variables which alter solar energy production, such as the sun and surrounding environment, determine whether a solar design is beneficial. This thesis presents a bridge deck surface integrated with solar cells …

Implementation Of New System For Oxygen Generation And Carbon Dioxide Removal, Angelo Peter Karavolos

Open Access Theses & Dissertations

This research effort develops an integrated system for CO2 removal and O2 production. A unique material, dodeca-tungsto-phosphoric acid (H3PO4W12O3; henceforth referred to as DTPA) is mixed with tetra-ethyl-ortho-silicate Si(OC2H5)4 or TEOS. This mixture exhibits unique properties of heat absorption and high electrical conductivity. In the system described herein, the DTPA resides within a cross linked arrangement of TEOS. The DTPA furnishes a source of O2, while the TEOS furnishes structural support for the large DTPA crystals. In addition, the large amount of H2O within the crystal also adsorbs CO2. It can also be cross-linked with other polymers such as polycarbonate, …

Liquid-Phase Exfoliation Of Two-Dimensional Graphite For Ink-Jet Printing, Monica Michel

Open Access Theses & Dissertations

Over the last decade, the study of two-dimensional (2D) materials has seen an incredible growth due to their unique thermal, mechanical and electronic properties. Solution phase manufacturing offers a way in which they can be produced at large scale by creating dispersions from the exfoliated material. Once created, different options for assembling devices exist. One technique for large scale manufacturing of materials in this form is ink-jet printing, which is a form of additive manufacturing that has proven to be attractive for the printed electronics industry. One challenge that ink-jet printing still faces is the shortage of inks with appropriate …

Molecular Dynamics Proxy Applications For Optimizing Performance Of Simulations Under Extreme Conditions, Jayalath Abeywardhana Mudiyanselage Madawa Abeywardhana

Open Access Theses & Dissertations

Exascale performance of scientific application is a prominent goal for the scientific community and computer hardware vendors. As a result, several proxy applications for the widely used scientific codes have been developed with the purpose of testing performance, memory and power consumption issues associated with simulations at the exascale. Co-MD is a proxy application for classical Molecular Dynamics (MD) codes based on the (SPaSM) Los Alamos code.

This work comprises two different but related computational aspects: performance evaluation and optimization of Co-MD (Co-Design Molecular Dynamics) for different computer architectures/execution models, and direct application of SPaSM (Scalable Parallel Short-range Molecular Dynamics) …

Mechanically Activated Combustion Synthesis Of Molybdenum Borosilicides For Ultrahigh-Temperature Structural Applications, Alan Alberto Esparza Hernandez

Open Access Theses & Dissertations

The desire to improve the efficiency of power generation gas-turbines has led to a relentless quest for new, ultrahigh-temperature structural materials to replace the current nickel-based superalloys. These materials have reached the maximum allowable operating temperature determined by the melting temperature of these alloys, which is about 1150 °C. These materials could be replaced by molybdenum silicides and borosilicides based on Mo5SiB 2 (T2) phase due to their high melting point and mechanical properties. A major challenge, however, is to simultaneously achieve high oxidation resistance and acceptable mechanical properties at elevated temperatures. One novel approach to improve these properties is …

Towards The Scalability And Hybrid Parallelization Of A Spatially Variant Lattice Algorithm, Henry Roger Moncada Lopez

Open Access Theses & Dissertations

The purpose of this research is to design a faster implementation of the spatially variant algorithm that improves its performance when it is running on a parallel computer system.

The spatially variant algorithm is used to synthesize a spatially variant lattice for a periodic electromagnetic structure. The algorithm has the ability to spatially vary the unit cell orientation and exploit its directional dependencies. The algorithm produces a lattice that is smooth, continuous and free of defects. The lattice spacing remains strikingly uniform when the unit cell orientation, lattice spacing, fill fraction and more are spatially varied. This is important for …

Microstructural Investigation Of Vintage Pipeline Steels Highly Susceptible To Stress Corrosion Cracking, Monica Adriana Torres

Open Access Theses & Dissertations

The use of pipelines for the transmission of gas offers not only efficiency, but a number of economic advantages. Nevertheless, pipelines are subject to aggressive operating conditions and environments which can lead to in-service degradation [1] and thus to failures. These failures can have catastrophic consequences, such as environmental damage and loss of life [2]. One of the most dangerous threats to pipeline integrity is stress corrosion cracking (SCC). Despite the substantial progress that has been achieved in the field, due to the complex nature of this phenomenon there is still not a complete understanding of this form of external …

Materials Characterization Of Deposits On Starboard (Inboard) Elevon Actuator Shaft Recovered From Space Shuttle Columbia, Mayra Contreras

Open Access Theses & Dissertations

With the new era of space exploration upon us and the Orion spacecraft currently being tested, which would replace the Space Shuttle as the orbiter that will transport humans into space once again, safety assurance is the main component for a successful mission. Aerospace materials have always played a big role when it comes to safety assurance. Having the knowledge of what materials are suitable to keep using when designing the future spacecraft that will take humans to Mars is fundamental in order to be confident that the vehicle and all that comprises it will function as envisioned. Expanding the …

Improving The Engineering Properties Of Pla For 3d Printing And Beyond, Carmen R. Rocha

Open Access Theses & Dissertations

Additive manufacturing (AM), now more commonly known as 3D printing, has been classified as efficient, fast, and practical in the prototyping sector of product development. In the work presented here, we will use one of the AM techniques known as Material extrusion 3D printing (ME3DP), which has all the advantages of AM. However, one of the biggest challenges facing ME3DP technologies is the limitation of the range of materials used by this technique. Acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA) are currently the most common thermoplastics materials used in ME3DP because of their ability to melt and be reprocessed. …

Fiberglass Goes Green: Developing Phosphate Glass For Use In Biodegradable Composites, Christina Lee Arendt

Open Access Theses & Dissertations

Composite materials, such as the glass fiber reinforced polyester thermosets known as "fiberglass," are used in many applications. However, recycling processes for these materials are inefficient and not widely available. Specially engineered degradable polymers offer an opportunity to redesign these composites. Additionally, the composite could be tailored to be multi-use, such that upon degradation, the resulting products could be used as part of a zeoponic substrate (artificial soil) for growing plants. Such a material would be beneficial for long-duration space missions, terraforming, or in other agricultural applications.

The research presented in this Dissertation focuses on developing phosphate glass for use …

Effects Of Fabrication Conditions On Mechanical Properties Of Ti-6al-4v Fabricated By Powder Bed Fusion Additive Manufacturing, Paola Azani

Open Access Theses & Dissertations

At the writing of this Thesis, additive manufacturing (AM) also known as 3D printing, has been popularized for its diversity in applications ranging from home and personal use, medical, industrial, consumer products, aerospace, architecture, automotive, military, fashion, food, art and more. Industries taking advantage of the design freedom and complexity offered by AM have exploded the growth of the technologies. Specifically, technologies that process metals using electron and laser beams have been recognized by the aerospace industry as a promising avenue for re-engineered components leading to reduced weight and improved engineering efficiencies for components like engine brackets and nozzles. However, …

Yttria Rich Tbcs As Candidates For Cmas Resistant Top Coats, Juan Jose Gomez

Open Access Theses & Dissertations

State of the art thermal barrier coatings (TBC) commonly made of 7-8 wt. % yttria stabilized zirconia (7YSZ) are used in modern gas turbines to generate a thermal protection to the underlying super alloy components. TBCs allow higher operating temperatures for hot gas path components, thus, generating higher engine efficiency. The infiltration of molten glassy mineral deposits composed of CaO-MgO-Al2O3-SiO2 (CMAS) represents one of the major threats in reducing performance and service life in aero and land based gas turbine engines. The CMAS deposits are ingested into the engine carried commonly in sand, runways debris, fly ash and volcanic ash. …

Vascularization In Interconnected 3d Printed Ti-6al-4v Foams With Hydrogel Matrix For Biomedical Bone Replacement Implants, Victor Correa

Open Access Theses & Dissertations

Abstract:

Vascularization or angiogenesis on newly implanted metal orthopedic implants has remained a challenge in the field of tissue engineering. In this research, an interconnected foam structure of Ti-6Al-4V was micro-fabricated by Electron Beam Melting (EBM) technique. The foam in question has a density of 1.77g/cm3 with 60% porosity and a tensile strength of 18GPa. An Extracellular Matrix based hydrogel was added as an aqueous matrix to the foam in question. Hypoxia mimetic stress has been closely related to many wound healing biomedical applications as it increases survival and proliferation molecular signals. To that end, increased expression of Hypoxia-Inducible Factor-1α …

Damage Tolerance And Assessment Of Unidirectional Carbon Fiber Composites, Mark David Flores

Open Access Theses & Dissertations

Composites are beginning to be used in a variety of different applications throughout industry. However, certification and damage tolerance is a growing concern in many aerospace and marine applications. Although compression-after-impact have been studied thoroughly, determining a damage tolerance methodology that accurately characterizes the failure of composites has not been established. An experimental investigation was performed to study the effect of stacking sequence, low-velocity impact response, and residual strength due to compression and fatigue. Digital Image Correlation (DIC) captured the strains and deformation of the plate due to compression. Computational investigations integrated non-destructive techniques (C-Scan, X-Ray) to determine the extent …

Methodology For Analyzing Epoxy-Cnt Phononic Crystals For Wave Attenuation And Guiding, Madhu Kolati

Dissertations, Master's Theses and Master's Reports

Phononic crystals (PhnCs) control, direct and manipulate sound waves to achieve wave guiding and attenuation. This dissertation presents methodology for analyzing nanotube materials based phononic crystals to achieve control over sound, vibration and stress mitigation. Much of the analytical work presented is in identifying frequency band gaps in which sound or vibration cannot propagate through these PhnCs. Wave attenuation and mitigation analysis is demonstrated using finite element simulation. Engineering principles from current research areas of solid mechanics, solid-state physics, elasto-dynamics, mechanical vibrations and acoustics are employed for the methodology. A considerable effort is put to show that these PhnCs can …

Structural, Dielectric, And Ferroelectric Characterization Of Lead-Free Calcium-Cerium Co-Doped Batio3 Ceramics, Juan Alberto Duran

Open Access Theses & Dissertations

Structure, morphology, and regulation of the dielectric properties via close-composition intervals is demonstrated for variable-cerium, constant-calcium co-doped barium titanate (Ba0.80Ca0.20CeyTi1-yO3; y=0.0-0.25; referred to BCCT). The effect of variable Ce-content on the structure and dielectric properties of BCCT is investigated. X-ray diffraction spectra confirms the studied samples are mainly in BT tetragonal phase with a small secondary phase detected as CaTiO3 in BCCT for y = 0.20 and 0.25. However, the lattice parameter reduction was evident with increasing Ce-content. Composition-driven dielectric constant leap (4,000-5,500) was observed from intrinsic BCT to BCCT for (y = 0.0-0.04). The temperature dependent dielectric constant showed …

A Cracking Methodology To Assess Fracture And Fatigue Properties Of Asphalt Concrete Mixtures Using Overlay Tester, Victor M. Garcia

Open Access Theses & Dissertations

Several highway agencies have either implemented or considered implementing performance tests to predict the cracking potential of asphalt concrete (AC) mixtures in the laboratory setting. One such test, the Overlay Tester (OT) test, measures the number of cycles to failure of the AC specimens by simulating the opening and closing of the cracks induced by daily temperature variations and high tensile strain generated by the traffic load. The variability of the OT test results is expressed as a major concern in reliably characterizing the cracking potential of the AC mixes.

The performance of the OT test, in general, and current …

Wettability Of Magnesium Based Alloys, Victor Manuel Ornelas

Open Access Theses & Dissertations

The premise of this project was to determine the wettability behavior of Mg-based alloys using three different liquids. Contact angle measurements were carried out along with utilizing the Zisman method for obtaining values for the critical surface tension. Adhesion energy values were also found through the use of the Young-Dupre equation. This project utilized the Mg-based alloy Mg-2Zn-2Gd with supplemented α-Minimum Essential Medium (MEM), Phosphate Buffer Saline solution (PBS), and distilled water. These three liquids are commonly used in cell cultivation and protein adsorption studies. Supplemented α-MEM consisted of α-MEM, fetal bovine serum, and penicillin-streptomycin. Mg-2Zn-2Gd was used because of …

Fabrication And Testing Of Cfrp Composites With Embedded Piezoelectric Particles For Temperature Sensing And Energy Harvesting, Emilio Tarango Valles

Open Access Theses & Dissertations

As a part of this world's continuous evolution and technological advancements, smart materials and functional composites have become an attractive topic. In many cases, these new functional composites are replacing the traditional engineering material due to their customizable mechanical properties. This Thesis analyzes and demonstrates the signal response, sensing capabilities and structural properties from Carbon/Glass Fiber Reinforced Plastic Composites (CFRP) with embedded Lead Zirconate Titanate Particles (PZT). The added PZT particles function as actuators, giving the composites a functionality. The PZT quantity inside each composite was variated to study better and characterize the mechanical and electrical properties; the variations were …

Characterization In 2d Sulfides And Graphene Composites For Sensing Applications, Alberto Delgado

Open Access Theses & Dissertations

In this work, we have evaluated 2D layered material composites for opto-electro-mechanical sensing applications. In particular, we have focused on TMDCs and graphite and studied the effects of chemical liquid exfoliation on the structural characteristics of the 2D layered materials, through particle size, x-ray diffraction, Raman and surface area analysis. An approach was developed to combine the solution-processed dispersion with organic and inorganic matrix materials for forming the composites. From Raman Spectroscopy of the ultra-sonicated samples, the I2D/IG>2 for graphite, and for MoS2 the difference between the A1g and E2g peak was 22.85cm-1, consistent with few layer 2D MoS2. …

Synthesis, Device Fabrication, And Characterization Of Two-Dimensional Molybdenum Disulfide, Gustavo Alberto Lara Saenz

Open Access Theses & Dissertations

The miniaturization of electronic devices according to Moore's Law has been propelled by the continuous demand for faster and smaller devices which continue to advance technology. One recent contribution to this trend was the isolation and characterization of one atom thick of graphite, known as graphene, which led to the Nobel Prize in physics in 2010 being awarded to Andre Geim and Konstantin Novoselov. Graphene and its related nanocarbon derivatives have exceptional mechanical, thermal, optical and electronic properties, making them a potential candidate for electronics and optoelectronics applications. However, this material has no intrinsic bandgap and complicated processes are required …

Intrinsic And Metal-Doped Gallium Oxide Based High-Temperature Oxygen Sensors For Combustion Processes, Ernesto Javier Rubio

Open Access Theses & Dissertations

Currently, there is enormous interest in research, development and optimization of the combustion processes for energy harvesting. Recent statistical and economic analyses estimated that by improving the coal-based firing/combustion processes in the power plants, savings up to ~$450-500 million yearly can be achieved. Advanced sensors and controls capable of withstanding extreme environments such as high temperatures, highly corrosive atmospheres, and high pressures are critical to such efficiency enhancement and cost savings. For instance, optimization of the combustion processes in power generation systems can be achieved by sensing, monitoring and control of oxygen, which is a measure of the completeness of …

Investigation Of Ti-6al-4v Alloy Response To Atmospheric Re-Entry Exposure, Jessica Lynn Buckner

Open Access Theses & Dissertations

Ti-6Al-4V is a widely used aerospace alloy for its high strength-to-weight ratio and high operating temperature properties. Despite widespread use, titanium and its alloys have been shown to ignite in oxygen and nitrogen rich test streams. The reactivity of titanium is attributed to the high solubility for oxygen that increases with temperature, accelerating the oxidation rate and resulting in a combustion reaction. When introduced to the monatomic oxygen rich and high enthalpy re-entry environment, Ti-6Al-4V X-link components from the space shuttle Columbia exhibited accelerated oxidation and combustion behavior. Ti-6Al-4V metal plates tested in the simulated re-entry environment of an arc-jet …