Open Access. Powered by Scholars. Published by Universities.®
Engineering Science and Materials Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- ANSYS (1)
- Aluminium (1)
- Corrosion Fatigue (1)
- ED-drilling (1)
- Energy harvesting; Piezoelectric ceramics; Piezoelectricity; Textile fibers; Vibrations (mechanical) (1)
-
- Experimental verification; Micro-mechanical modeling; Multi-scale approaches; Multi-scale Modeling; Numerical and experimental analysis; PFC; Static and dynamic tests; Transformation field analysis (1)
- Finite element method (1)
- Heat Transfer (1)
- Ion implantation (1)
- Organic thin film (1)
- PCD (1)
- Pitting corrosion (1)
- SEM (1)
- Solar Energy (1)
- Thermal Mass (1)
- Thermal Transmittance (1)
- Thin film transistor (1)
- Visible Light Transmittance (1)
Articles 1 - 6 of 6
Full-Text Articles in Engineering Science and Materials
Turning An Organic Semiconductor Into A Low-Resistance Material By Ion Implantation, Beatrice Fraboni, Alessandra Scidà, Piero Cosseddu, Yongqiang Wang, Michael Nastasi, Silvia Milita, Annalisa Bonfiglio
Turning An Organic Semiconductor Into A Low-Resistance Material By Ion Implantation, Beatrice Fraboni, Alessandra Scidà, Piero Cosseddu, Yongqiang Wang, Michael Nastasi, Silvia Milita, Annalisa Bonfiglio
Nebraska Center for Energy Sciences Research: Publications
We report on the effects of low energy ion implantation on thin films of pentacene, carried out to investigate the efficacy of this process in the fabrication of organic electronic devices. Two different ions, Ne and N, have been implanted and compared, to assess the effects of different reactivity within the hydrocarbon matrix. Strong modification of the electrical conductivity, stable in time, is observed following ion implantation. This effect is significantly larger for N implants (up to six orders of magnitude), which are shown to introduce stable charged species within the hydrocarbon matrix, not only damage as is the case …
Experimental Investigation And Thermal Modeling On Electro Discharge Drilling Of Pcd, Farnaz Nourbakhsh
Experimental Investigation And Thermal Modeling On Electro Discharge Drilling Of Pcd, Farnaz Nourbakhsh
Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research
This study presents an experimental investigation and finite element simulation of Electro Discharge Drilling (ED-Drilling) of Polycrystalline Diamond (PCD). PCD has many outstanding properties including uniformly high hardness, high wear resistance and strong corrosion which are the main causes of widely using PCD. While PCD has many advantages and an important role in industrial applications, its high level of hardness and wear resistance cause this material to be difficult to form and machine by using traditional machining methods. EDM as a nontraditional machining process is an effective method among other non-traditional methods for PCDs due to its low cost and …
Characterizing Water As Gap Fill For Double Glazing Units, Bright Adu
Characterizing Water As Gap Fill For Double Glazing Units, Bright Adu
Masters Theses & Specialist Projects
The use of sunlight has always been a major goal in the design and operation of commercial buildings to minimize electrical consumption of artificial lighting systems. Glazing systems designed to allow optimal visible light transmission also allow significant unwanted direct solar heat gain caused by infrared light. Conversely, glazing systems that are designed to reflect unwanted direct solar heat gain significantly reduce the transmittance of visible light through windows. The goal of this research was to characterize the performance of water as gap-fill for double-glazing units in eliminating the compromises that exist in current glazing systems with respect to light …
A Microscopic Study On The Corrosion Fatigue Of Ultra-Fine Grained And Conventional Al–Mg Alloy, Mala M. Sharma, Josh D. Tomedi, Jeffery M. Parks
A Microscopic Study On The Corrosion Fatigue Of Ultra-Fine Grained And Conventional Al–Mg Alloy, Mala M. Sharma, Josh D. Tomedi, Jeffery M. Parks
Faculty Journal Articles
The corrosion behavior of a nanocrystalline (NC)/ultrafine grained (UFG) Al–Mg based alloy was investigated and compared to its conventional counterpart 5083(H111). The corrosion fatigue (CF) was studied with respect to pit initiation, pit location and crack propagation as a function of environment. Scanning electron microscopy (SEM) with EDS was used to analyze the fracture surface of the failed specimen with respect to pitting characteristics, crack propagation and corrosion product. Load vs. cycles to failure was measured and S/N curves were generated for the UFG Al–Mg based alloy and the conventional counterpart 5083 in air and seawater.
A Multi-Scale Based Model For Composite Materials With Embedded Pzt Filaments For Energy Harvesting, A.E. El-Etriby, M.E. Abdel-Meguid, K.M. Shalan, Tarek Hatem, Yehia Bahei-El-Din
A Multi-Scale Based Model For Composite Materials With Embedded Pzt Filaments For Energy Harvesting, A.E. El-Etriby, M.E. Abdel-Meguid, K.M. Shalan, Tarek Hatem, Yehia Bahei-El-Din
Centre for Advanced Materials
Ambient vibrations are major source of wasted energy, exploiting properly such vibration can be converted to valuable energy and harvested to power up devices, i.e. electronic devices. Accordingly, energy harvesting using smart structures with active piezoelectric ceramics has gained wide interest over the past few years as a method for converting such wasted energy. This paper provides numerical and experimental analysis of piezoelectric fiber based composites for energy harvesting applications proposing a multi-scale modeling approach coupled with experimental verification. The multi-scale approach suggested predicting the behavior of piezoelectric fiber-based composites use micromechanical model based on Transformation Field Analysis (TFA) to …
Influence Of Spatial Variations Of Railroad Track Stiffness And Material Inclusions On Fatigue Life, Celestin Nkundineza
Influence Of Spatial Variations Of Railroad Track Stiffness And Material Inclusions On Fatigue Life, Celestin Nkundineza
Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research
Railroad transportation is very important for economic growth and effective maintenance is one critical factor for its economic sustainability. The high repetitive forces from a moving railcar induce cyclic stresses that lead to rail bending and potential deterioration due to fatigue crack initiation and propagation. Previous research for prediction of fatigue life has been done under the assumptions of a uniform track bed and a homogeneous rail. However the spatial variation of the track stiffness is expected to increase the maximum stresses in the rail and, therefore, accelerate the fatigue process. The research described in this dissertation is focused on …