Engineering Science and Materials Commons^™

Cfrp Delamination Density Propagation Analysis By Magnetostriction Theory, Brandon Eugene Williams

All Dissertations

While Carbon Fiber Reinforced Polymers (CFRPs) have exceptional mechanical properties concerning their overall weight, their failure profile in demanding high-stress environments raises reliability concerns in structural applications. Two crucial limiting factors in CFRP reliability are low-strain material degradation and low fracture toughness. Due to CFRP’s low strain degradation characteristics, a wide variety of interlaminar damage can be sustained without any appreciable change to the physical structure itself. This damage suffered by the energy transfer from high- stress levels appears in the form of microporosity, crazes, microcracks, and delamination in the matrix material before any severe laminate damage is observed. This …

Multiscale Modeling And Gaussian Process Regression For Applications In Composite Materials, Joshua Arp

All Dissertations

An ongoing challenge in advanced materials design is the development of accurate multiscale models that consider uncertainty while establishing a link between knowledge or information about constituent materials to overall composite properties. Successful models can accurately predict composite properties, reducing the high financial and labor costs associated with experimental determination and accelerating material innovation. Whereas early pioneers in micromechanics developed simplistic theoretical models to map these relationships, modern advances in computer technology have enabled detailed simulators capable of accurately predicting complex and multiscale phenomena.

This work advances domain knowledge via two means: firstly, through the development of high-fidelity, physics-based finite …

Characterization Of Mechanically Recycled Polylactic Acid (Pla) Filament For 3d-Printing By Evaluating Mechanical, Thermal, And Chemical Properties And Process Performance, Mahsa Shabani Samghabady

All Theses

Polylactic acid (PLA) is a biopolymer made from renewable resources such as sugar and corn. PLA filament is a popular material used in Fused Deposition Modeling (FDM) 3D-printing. While this material has many advantages, all the failed parts, support structures, rafts, nozzle tests, and the many prototype iterations during the 3D-printing process contribute to the plastic pollution and release of greenhouse gases. Although PLA is biodegradable, it can take years to degrade in landfills. Instead of throwing away PLA waste and buying new filaments, PLA can be recycled. Amongst the different recycling technologies, mechanical recycling is the most environmentally friendly. …

Mesoscale Modeling And Machine Learning Studies Of Grain Boundary Segregation In Metallic Alloys, Malek Alkayyali

All Dissertations

Nearly all structural and functional materials are polycrystalline alloys; they are composed of differently oriented crystalline grains that are joined at internal interfaces termed grain boundaries (GBs). It is well accepted that GB dynamics play a critical role in many phenomena during materials processing or under operating environments. Of particular interest are GB migration and grain growth processes, as they influence many crystal-size dependent properties, such as mechanical strength and electrical conductivity.

In metallic alloys, GBs offer a plethora of preferential atomic sites for alloying elements to occupy. Indeed, recent experimental studies employing in-situ microscopy revealed strong GB solute segregation …

Classification Of Electrical Current Used In Electroplastic Forming, Tyler Grimm

All Dissertations

Electrically assisted manufacturing (EAM) is the direct application of an electric current to a workpiece during manufacturing. This advanced manufacturing process has been shown to produce anomalous effects which extend beyond the current state of modeling of thermal influences. These purported non-thermal effects have collectively been termed electroplastic effects (EPEs).

While there is a distinct difference in results between steady-state (ideal DC) testing and pulsed current testing, the very definition of these two EAM methods has not been well established. A "long" pulse may be considered DC current; a "short" pulse may produce electroplastic effects; and even "steady-state" current shapes …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

The Effects Of Laser Shock Peening On The Fatigue Life Of Additive Manufactured Alsi10mg, Jacob L. Biddlecom

All Dissertations

Additive manufacturing (AM) is becoming a manufacturing process that is well established, even with all the resources and attention that has been brought to it, the field is still lacking some key understandings. Currently, there are certain aspects that are difficult to overcome. Some of the intrinsic obstacles include process-induced defects, such as porosity from lack of fusion and gaseous bubble entrapment, as well as complex thermal gradients. These defects can lead to altered material response especially when looking at the fatigue life. The fatigue behaviors of AM components can change from print to print as well as when compared …

An Application Of Optimized Bistable Laminates As A Low Velocity, Low Impact Mechanical Deterrent, Graham Lancaster

All Theses

This research considers the problem of using bistable laminates as a mechanical deterrent to the impending impact of a particle. The structure will be controlled through an algorithm that will utilize piezoelectric devices to activate them in unison with the bistable laminate to successfully deter. A novel experimental setup will be constructed to ensure that the bistable laminate stays fixed when acting as a mechanical deterrent. Piezoelectricity is the main driving force of the bistable laminate to morph and this study will use a Macro Fiber Composite (MFC) actuator that contains piezoelectric ceramic rods in a patch to transfer electrical …

Multi-Robot Symbolic Task And Motion Planning Leveraging Human Trust Models: Theory And Applications, Huanfei Zheng

All Dissertations

Multi-robot systems (MRS) can accomplish more complex tasks with two or more robots and have produced a broad set of applications. The presence of a human operator in an MRS can guarantee the safety of the task performing, but the human operators can be subject to heavier stress and cognitive workload in collaboration with the MRS than the single robot. It is significant for the MRS to have the provable correct task and motion planning solution for a complex task. That can reduce the human workload during supervising the task and improve the reliability of human-MRS collaboration. This dissertation relies …

Crack Control And Bond Performance Of Alternative Coated Reinforcements In Concrete, Sachin Sreedhara

All Dissertations

Concrete cracking in structures is a ubiquitous problem which can lead to the deterioration of the structure. Other than affecting the strength aspect of a structure, cracking impacts the serviceability criteria as well. Although cracking phenomenon in any structure is highly inevitable, it has to be minimized in order to maintain a structure’s life effectively. Cracking in reinforced concrete structures is related to the bond strength developed between the bar and the concrete. It also depends on an ability of the bar to resist the stresses due to shrinkage to minimize the crack. Another important aspect is the resistance offered …

Effects Of Transportation Hazards On Package Performance And Food Product Shelf Life, Kyle Dunno

All Dissertations

This research studied the effect of transportation hazards on food product shelf life and package performance. Studies were conducted to determine the effect of package headspace volume, product viscosity and storage temperature on package integrity. Finally, accelerated shelf life testing (ASLT) was utilized to determine how simulated transportation hazards affected the shelf life of a specific food product. Institutional retort pouches containing either water or 5% starch solution were filled with varying amounts of headspace volume to determine if package headspace volume could aid in package performance during simulated engineering tests for packaged products. Fixed displacement vibration testing and compression …

The Effects Of Chlorine Dioxide Gas On The Sensory Properties Of Whole Tomatoes, Christopher Gottilla

All Theses

This experiment sought to measure the changes in sensory quality that occur in tomatoes as the result of chlorine dioxide gas treatment. Tasti-Lee tomatoes (VFFF Hybrid #5755) were treated with two different levels of chlorine dioxide gas (10mg and 50mg of ClO2-forming material per kg of tomato) utilizing sachets. Testing compared the treated tomatoes and an untreated control group. These tests included flat-plate compression for firmness, sensory evaluation using a difference from control test, color analysis of the skin and flesh using a colorimeter, and enumeration of aerobic microbes and yeasts and molds. Flat-plate compression of whole tomatoes revealed no …

Combining Modified Atmosphere Packaging And Nisin To Extend The Shelf Life Of Atlantic Salmon (Salmo Salar), Dong Han

All Theses

Atlantic salmon is often used in laboratory experiments to represent marine fishes. Many researchers try to optimize the levels and dosage of preservatives to maintain the freshness and extend the shelf-life of Atlantic salmon. Little information has been provided about the effectiveness of combined method between MAP and nisin, especially on the preservation of Atlantic salmon. Strong evidences suggest that MAP associated with nisin may have a potential to improve Atlantic salmon storage quality. Preservation effectiveness of combining modified atmosphere package (MAP) and nisin on fresh Atlantic salmon was determined using various methods. Six groups of farmed Atlantic salmon were …

Microanalysis Of Polymer Chain Diffusion In Heat Seals, Russell Cooper

All Theses

Heat sealing is an integral method for the closure and protection of packaging. Previous work has shown that seal strength is developed by the interdiffusion of polymer chains within heat seals. Heat seals were made between two dissimilar materials. Poly(ethylene-co-acrylic acid) (EAA) was heat sealed to ionomer. Diffusion within the EAA-ionomer heat seals was estimated. The diffusion estimates were then related to resulting seal strength in the EAA-ionomer sealant system. Heated tooling sealing was utilized to make heat seals at 40 psi (275.79 kPa), 0.5 seconds, and a range of temperatures between 180˚F (82.22˚C) and 300˚F (148.89˚C). Scanning electron microscopy …

Relationship Between Peel Force, Opening Force, And Burst Force For A Semi-Rigid Cup And Lid, Pre- And Post-Retort, Raj Navalakha

All Theses

This research determines if there is any relationship between the peel force, the opening force and the burst force for a semi-rigid cup and lid system, for pre- and post-retort conditions. It also compares the relationship (regression lines) between these forces pre- and post-retort. These seal results were studied by varying the sealing parameters of dwell time and temperature while keeping the pressure constant. Polypropylene cups and a peelable barrier retort lidding were used in this study. As compared to past research, a different peel testing technique was used to measure the peel and the opening force. The entire lid …

The Effect Of Decorative Foil Stamping On Consumer Attention, Julianne Holmes

All Theses

Packaging plays a key role in communicating product benefits to consumers at the point of sale (Rundh, 2009). Oftentimes, designers use high visibility enhancements to help the package stand out among competitors. Although luxury products often use high-end graphic techniques to convey high quality product, many private label package designers are also using these enhancements to attract attention to their products. Foil stamping is a high visibility enhancement that can create a rich and elegant effect on a package. The process involves transferring a thin layer of foil onto a substrate by using pressure and heat. No quantitative research has …

Comparison Of Methods To Evaluate Chitosan As An Antimicrobial Against Listeria Spp. Cultures, Scott Hartley

All Theses

The antimicrobial properties of a chitosan-coated vacuum-packaged pouch were tested against Listeria monocytogenes (LM) inoculated on frankfurters. A 1.5% chitosan solution was successfully coated onto a corona-treated poly/nylon based film and then heat-sealed to form a pouch. An initial 5 log CFU/mL population of LM was used to inoculate a frankfurter in the pouch, which was then vacuum-sealed and stored at 4¡ and 13¡ C for a period of 8 weeks, with bacteria enumeration performed on weekly intervals. An uncoated pouch was tested as a control. It was found that the chitosan-coated pouches did not exhibit any antimicrobial properties against …

Effectiveness Of Display Trays On Attention And Purchase Of Consumer Products, Erin Snyder

All Theses

Through the collection of qualitative and quantitative data, consumer perception and preference of display trays in the retail environment was examined and evaluated. Purchase decision and eye-tracking data was collected, as well as qualitative survey information, to determine if participants favored packages in a display tray opposed to packages placed directly on store shelving. This preference was measured in terms of time to first fixation, total fixation duration, fixation count as well as final purchasing decision. The experiment analyzed liquid dish soap and canned tomatoes, and was organized as a 2 (products per category) x 1 (display tray per category) …

The Effect Of Applying Established Color Theory To Packaging When Visible Product And External Labels Exist Simultaneously, Rachel Randall

All Theses

Color is affected by what is around it. A color doesn't necessarily look the same when its placed against two different colored backgrounds (Ryan, William, and Theodore Conover, 2004) Oftentimes, designers are given a blank package and given the task of creating a label or package for the product. What is missing is the product, which can be an integral part of this design process. What is not yet to be determined by current packaging research is how colors work together through the product and package. One way to determine this would be through transparent bottled packages that contain external …

The Effect Of Packaging Material Properties On Consumer Food Quality Perception In Quick-Service Restaurants, Emily Thackston

All Theses

The majority of menu items available in quick-service restaurants (QSR) are consumed directly from a container or package. The main reasons consumers choose to eat fast food are because it is convenient, prepared quickly, a good value, and inexpensive. Therefore, the packaging becomes an integral part of the food product and from a consumer perspective must be consistent with their expectations and motives for choosing to eat fast food. Prior research has directly linked characteristics of consumer food packaging experience to their perception of its contents. The purpose of this research is to determine if consumer quality perception of food …

Measuring Arousal Through Physiological Responses To Packaging Designs: Investigating The Validity Of Electrodermal Activity As A Measure Of Arousal In A Realistic Shopping Environment, Daniel Hutcherson

All Theses

The validity of electrodermal activity is investigated in the context of packaging design evaluation as a sensitive measure of arousal. Analysts agree that purchasing decisions are subconscious and emotional decisions, contrasted against the popular belief that consumers make purely rational decisions. To understand the personal and rapid character of a consumer's purchasing decisions we must find methods of which to measure and interpret consumer reactions to various packaging designs. Focus groups are discussed as antiquated research methods and new, advanced technologies are outlined as physiological responses. Past literature displays methodological approaches to using electrodermal activity measures in consumer studies, however …

Product Display Versus Graphical Representation On Packaging, Joshua Galvarino

All Theses

ABSTRACT
Previous research conducted (Hurley, et al., 2012) concerning physical and graphical product visibility from the primary display panel (PDP) is limited to one product category. This research expands previous peer-reviewed research, which indicates that there is a significant difference between consumer preferences of graphical display vs. physical product display on packaging.
The shelf presence of packages showing actual product visibility versus packages showing only a graphical representation of the product was evaluated. Both shopping results and quantitative data using eye-tracking technology were collected and cross-referenced with a qualitative, post-experiment survey.
Specifically, variables of packaging within pasta, snacks, prepared frozen …

Development And Characterization Of Shellac-Hydroxypropyl Methyl Cellulose Composite Films With Acid Catalyst, Sana Asrar

All Theses

The objective of this research was to develop a shellac-hydroproyl methyl cellulose (Sh-HPMC) composite film with enhanced water vapor barrier. Citric acid (CA) was used as an acid catalyst, to promote miscibility between HPMC and shellac. In a preliminary test, three different concentrations of CA (1000:1, 200:1, 100:1) were tested to identify the best Sh:CA ratio. Based on the Water vapor permeability properties and mechanical properties, Sh-CA (1000:1 ratio) had the most enhanced water vapor barrier and the lowest reduction in tensile strength compared to the pure HPMC film (control). In the later part of the research, the effect of …

Determining The Proper Point Size For Display Type On Packaging, Joanna Fischer

All Theses

Through the use of a preference test, the proper point size of display text on a package was evaluated in relation to a package's proportions. The test involved the examination of packaging images displaying the product or brand name in various point sizes by 150 participants who were then asked to choose the option they most preferred. The participants were then provided with a post-survey intended to gather additional information regarding potential preference motives.
The primary purpose of this study was to determine the most preferred display type size of a package based on its relationship with the package's proportions. …

The Effect Of Food Ingredients On The Oxygen Barrier Properties Of Retort Materials, Amanda Ward

All Theses

An unexplored area in research is addressing how retorted food ingredients interact with retort packaging's oxygen barrier. Ten common food ingredients (whey protein isolate, soy protein isolate, bovine gelatin, fish gelatin, high molecular weight fish gelatin, water, air, oil, potato starch, and hydroxypropyl methylcellulose) were assessed to find their effect on the barrier properties of CPP, PET, and high barrier commercial retort pouches. OxySense Gen III 300 and Mocon OxTran 2/21 were used to evaluate the samples. CPP pouches were first assessed with the OxTran 2/21 and indicated that treatments affected the OTR's of the film materials. However, results from …

Relating Burst Pressure To Seal Peel Strength In Pouches, William Bernal

All Theses

This work was aimed at studying the relationship between burst pressure and seal peel strength. Past researchers developed a force balance equation based on the analysis of a force diagram to relate burst pressure to seal strength. The theoretical formula S=P(D/2) (S=Seal Strength, P=Burst Pressure, D=Restraining Plate Gap) has been studied by past researchers with contrasting results.
The theoretical formula was tested by varying dwell time to produce seals of varying strength. Pouches were burst tested at each of these dwell times to obtain burst pressures, burst peeling times, and burst locations. Corresponding peel tests were performed with crosshead speeds …

The Effect Of Full Body Versus Partial Body Graphic Labeling On Beverage Packaging, Toni Gomes

All Theses

Through the collection of quantitative and qualitative data, the shelf presence of
full body graphic labels versus partial body graphic labels on plastic beverage bottles was
examined and evaluated. Eye tracking was used to collect phenomenological data atop
the stimuli, while a shopping checklist was used to collect purchase preference. A postexperiment
survey was also conducted in order to gather qualitative data regarding
possible purchase influences.
The experiment was a 2 (label size) x 6 (beverage flavor) x 2 (age group) study,
conducted with 28 participants in a consumer retail environment using mobile eye
tracking technology. The goal of this …

Statistical Analysis Of The Stress-Energy Methodology Applied To Cushion Curve Determination, Kendalyn Paulin

All Theses

The stress-energy method is a proposed enhancement to ASTM D1596 that reduces all drop height, thickness and static load combinations into a single equation that can be used to generate any reasonable cushion curve for a particular material. There remains a question as to how accurate the stress-energy method can predict acceleration values and whether it is statistically comparable to ASTM D1596. There are three phases to this research that attempt to determine the accuracy of the stress-energy method: gathering data using the stress-energy method and analyzing the goodness of fit of the stress-energy equation, predicting a cushion curve and …

The Effects Of Solvent Mixture On The Thermal And Mechanical Properties Of Solvent Cast Poly-Lactic Acid (Pla) Film, Jeremy Hughes

All Theses

CH 1 ABSTRACT
The objective of this study was to investigate the effects of various solvents on the crystallinity and thermal expansion stability of PLA film. Three different PLA films were produced by the solvent casting technique; PLA in chloroform (PLA-C), PLA in methylene chloride (PLA-M), and PLA in methylene chloride: acetonitrile = 50: 50 (PLA-MA). The PLA-MA had higher % crystallinity, 46.15, than the PLA-C, 24.03, and the PLA-M, 14.25. With this increase in crystallinity, the PLA-MA had improved thermal expansion stability as shown by very low accumulated dimensional changes at 20-100 ¡C. Wide angle x-ray diffraction identified multiple …

Effect Of Different Oxygen Barrier Pouches On The Quality Of Retorted Carrots, Sarah Khor

All Theses

Thermally processed (TP) baby carrots were packaged in pouches with varying oxygen transmission rate (OTR) pouches. The pouches were four layer laminate (PET-Nylon-Barrier-CPP) with barrier layer being foil, aluminum oxide (AlOx), ethylene vinyl alcohol (EVOH), and nylon. Retort pouches were placed in boxes that were stored in an environmental chamber (43 °C, 50%RH). The objective of the study was to determine an alternative barrier retort pouch that is microwavable and still had similar barrier functions to foil for baby carrots and determine how the alternative compare with regard to shelf life. Instrumental analysis of color (L*, a*, b*) and texture …