Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal

Materials Science and Engineering

2006

Articles 1 - 30 of 63

Full-Text Articles in Engineering Science and Materials

Reaction Mechanism Of V(Ⅳ)/V(Ⅴ) Redox Couple At Graphite Felt Composite Electrode Bonded With Conductive Carbon Plastic, Xiao-Gang Li, Ke-Long Huang, Liusu-Qin Liusu-Qin, Ning Tan, Li-Quan Chen Nov 2006

Reaction Mechanism Of V(Ⅳ)/V(Ⅴ) Redox Couple At Graphite Felt Composite Electrode Bonded With Conductive Carbon Plastic, Xiao-Gang Li, Ke-Long Huang, Liusu-Qin Liusu-Qin, Ning Tan, Li-Quan Chen

Journal of Electrochemistry

The rate-determining step of V(Ⅳ) /V(Ⅴ) redoxreaction was investigated at graphite felt(GF)composite electrode by various techniques: cyclic voltammetry,polarization curve and impedance spectroscopy.Cyclic voltammetry analysis indicated that V(Ⅳ) /V(Ⅴ) redox reaction at GF electrode is quasi reversible.Acertain chemical reaction step is suspected to follow the electron transfer step of this reaction.The Tafel slopevalue(0.124) obtained from the polarization curve agrees well with theoretical value(0.12),which supposingthe electron transfer step was the rate-determining step.Impedance Spectroscopies at various potentials werestudied and simulated by equivalentcircuits.The impedance value of the electron transfer step modified is greatlyhigher than the others,which shows that the electron transfer step is the …

Go to article

Electrochemical Characterization Of Positive Electrode Material Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li Nov 2006

Electrochemical Characterization Of Positive Electrode Material Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li

Journal of Electrochemistry

Cathode materials LiNi_(1/3)Co_(1/3)Mn_(1/3)O_(2) were prepared by low-heating solid-state reaction.The micro-structure and morphology of as-synthesized materials have been investigated by using XRD and SEM.The compatibilities of LiNi_(1/3)Co_(1/3)Mn_(1/3)O_(2) with purchased LiPF_(6)/ EC+DMC+DEC electrolyte and prepared LiBOB/EC+DEC+EMC electrolyte have also been studied.The Li/LiNi_(1/3)Co_(1/3)Mn_(1/3)O_(2) batteries showed excellent electrochemical properties in the LiPF_(6)/ EC+DMC+DEC electrolyte.Reversible discharge capacities of 167、163、163、157、147mAh/g at 0.5C、1C、1.5C、2C、3C rate between 2.7~4.35 V,with stable cycling performances have been obtained.Comparatively,the specific capacity of 160 mAh/g at 0.5C was obtained in LiBOB/EC+DEC+DEC electrolyte,which was just a little lower than that in the other electrolyte.However,the high rate capability of the materials in LiBOB/EC+DEC+DEC was not as …

Go to article

The Synthesis,Structure And Electrochemical Performances Of Lithium Iron Phosphate, Hui Xie Nov 2006

The Synthesis,Structure And Electrochemical Performances Of Lithium Iron Phosphate, Hui Xie

Journal of Electrochemistry

The lithium iron phosphate cathode materials were synthesized by solid-state reaction combined high-rate ball milling under the temperature ranging from 400 ℃ to 700 ℃.The crystalline structure,morphology of particles,and electrochemical performance of the sample were investigated by X-ray diffraction,scanning electron microscopy and charge-discharge test.The results showed that the sintering temperature had great influences on the crystal structure,morphology and electrochemical performances of LiFePO_(4).The sample synthesized under 600℃ showed the best charge-discharge performances with the first specific discharge capacity of(128.8) mAh/g and the 15~(th) specific discharge capacity of 129.1 mAh/g at 0.1C rate,each charge-discharge cycling efficiency being 99.7%.Also the sample showed good …

Go to article

Synthesis Of Monolithic Carbon/Nickel Oxide Composite Electrode Material And Cyclic Voltammetry Characteristics, Tian-Ying Guo, Jing-Wei Zhu, Mou-Dao Song, Bang-Hua Zhang Nov 2006

Synthesis Of Monolithic Carbon/Nickel Oxide Composite Electrode Material And Cyclic Voltammetry Characteristics, Tian-Ying Guo, Jing-Wei Zhu, Mou-Dao Song, Bang-Hua Zhang

Journal of Electrochemistry

Monolithic carbon/nickel oxide composite materials were synthesized by carbonization of phenol formaldehyde gels that were ion-exchanged with Ni~(2+).Atomic absorption spectroscopy and powder X-ray diffraction technique were used to characterize the chemical composition and physical structure of the materials.The nickel dope amount for this method can reach 5.9 %(by mass).Subsequent cyclic voltammetry experiments indicate that the materials exhibit best capacitive performance at the nickel content of 4.4 %.

Go to article

Deep Treatment Of Pulping Wastewater Using Three Phase Fluidized Bed Electrode Reactor, Dan Wu Nov 2006

Deep Treatment Of Pulping Wastewater Using Three Phase Fluidized Bed Electrode Reactor, Dan Wu

Journal of Electrochemistry

Treatment of pulping wastewater by using a novel electrochemical reactor,i.e.the three phase fluidized bed electrode,reactor were invesigated.The effects of air flow rate,applied voltage,pH value and FeSO_(4) concentration on electrolysis efficiency were investigated.It was clearly shown that the 20 V of voltage,0.3 m~(3) h~(-1) of air flow rate,1000 mg L~(-1) of FeSO_(4) concentration and pH≈2.5 were its best conditions.COD removal could be 70.1% under these conditions.

Go to article

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen Nov 2006

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen

Journal of Electrochemistry

Electrochemical behavior of Bup has been investigated by means of cyclic voltammetry,linear sweep voltammetry,differential pulse voltammetry and square wave voltammetry.The results indicate that the electrochemical behavior of Bup on the surface of glassy carbon electrode is corresponding to a irreversible two-protons and two-electrons process with absrption.The square wave voltammetry for determination of Bup in actual samples has been established.

Go to article

Facilitated Effect Of Ag To Oxygen Transportation In Pem Fuel Cell Air Cathodes, Hong-Feng Xu, Jian-Hua Dong, Xiang-Li Hou Nov 2006

Facilitated Effect Of Ag To Oxygen Transportation In Pem Fuel Cell Air Cathodes, Hong-Feng Xu, Jian-Hua Dong, Xiang-Li Hou

Journal of Electrochemistry

Silver(Ag) was deposited in the pores of Nafion membrane by ion exchange and succedent hydrogen reduction;the structures of Nafion-Ag membrane were measured by TEM and XRD,the diffusion coefficients of oxygen in Nafion-Ag was determined by electrochemical limited current method.The results showed that after deposited silver,the pores in the Nafion were enlarged by silver grains;the oxygen diffusion coefficient was increased about four times.By introducing silver in the thin Nafion film around the cathode catalyst,the performance of PEM fuel cell have a evident increasing in high current density, which shows the facilitated effects of silver to oxygen transportation in PEM fuel cell.

Go to article

Structure And Electrochemical Characteristics Of Lifepo_4 Prepared By The Polyacrylates-Pyrolysis-Reduction Method For Li-Ion Batteries, Li-Hong Yu, Yu-Liang Cao, Xiao-Fei Zhang, Han-Xi Yang, Xin-Ping Ai Nov 2006

Structure And Electrochemical Characteristics Of Lifepo_4 Prepared By The Polyacrylates-Pyrolysis-Reduction Method For Li-Ion Batteries, Li-Hong Yu, Yu-Liang Cao, Xiao-Fei Zhang, Han-Xi Yang, Xin-Ping Ai

Journal of Electrochemistry

The cathode material of olivine LiFePO_(4) was prepared by a novel method of polyacrylate-pyrolysis-reduction.XRD demonstrates that the material have the olivine structure.SEM photo shows an average particle-size of about 100 nm with a well distribution.Electrochemical test of cycling at a constant current reveals the discharge capacity of 138 mAh/g and a good cycling stability.It is a novel practicable technology to prepare LiFePO_(4) by using polyacrylate-pyrolysis-reduction method.

Go to article

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan Nov 2006

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan

Journal of Electrochemistry

Gold nanocrystals with controllable size were synthesized through a simple electroreduction method using poly(N-vinylpyrrolidone)(PVP) of different polymerization degree as both stabilizer and shape-controller for gold nanoclusters.Individual gold nanoparticles spontaneously assembled into the wire-and ring-shaped nanoparticle aggregates depending on the PVP's dynamic stretching and curling,and precursor nanoparticles grew into flat,single-crystalline nanoprisms with thickness of dozens of nanometers based on the oriented aggregation between particles.Besides,core-shell Au/Ag nanoparticles were conveniently synthesized through two-step electroreduction of noble metal ions in the presence of PVPK30.The electrochemical synthetic method based on PVP provides a new path for preparation of noble metal nanostructured materials with different shape …

Go to article

Synergistic Functions Of Trimethl Phosphate And Vinylene Carbonate As Additives For The Li-Ion Batteries, Zhi-Yuan Tang, Yan-Bing He, Quan-Sheng Song, Yu-Hong Chen, Yuan-Gang Liu, Qiang Liu Nov 2006

Synergistic Functions Of Trimethl Phosphate And Vinylene Carbonate As Additives For The Li-Ion Batteries, Zhi-Yuan Tang, Yan-Bing He, Quan-Sheng Song, Yu-Hong Chen, Yuan-Gang Liu, Qiang Liu

Journal of Electrochemistry

The cooperative effects of trimethl phosphate and vinylene carbonate as additives for Li-ion batteries are investigated by using the cyclic voltammetry,electrochemical impedance spectroscopy and scanning electronic micro-photographs.The results show that the combination application of TMP and VC as additives for Li-ion batteries not only enhances safety of the batteries,but also improves their cycling performance.The reason may be ascribed to firstly VC being reduced and the reduction product polymerized to form excellent solid electrolyte interface(SEI) layer on the surface of graphite electrode during the first charge and discharge process,which prevents effectively the decomposition of TMP on the surface of the graphite …

Go to article

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma Nov 2006

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma

Journal of Electrochemistry

Powder micro-electrodes were prepared from raw carbon nanotubes and carbon nanotubes modified by carboxyl.The electro-reduction properties of both the raw and open-ended carbon nanotubes in p-Nitrophenol solution were investigated.The FTIR spectrum result indicated that the functional groups are successfully fixed on the surface of the carbon nanotubes after nitric acid treatment.The cyclic voltammetry results show that the electrochemical activity of carboxyl-modified carbon nanotubes was improved.The mechanism of electro-(reduction) for the carbon nanotubes after acid treatment was discussed.

Go to article

Study Of The Electrooxidation Of Glycerol On Oxide And Pd/C Composite Catalysts, Zhi-Yuan Yan, Chang-Wei Xu, Pei-Kang Shen Nov 2006

Study Of The Electrooxidation Of Glycerol On Oxide And Pd/C Composite Catalysts, Zhi-Yuan Yan, Chang-Wei Xu, Pei-Kang Shen

Journal of Electrochemistry

Oxide and Pd on carbon composite catalysts have been prepared by intermittent microwave heating(IMH) method.The performance of the catalysts for glycerol oxidation in alkaline solution is studied by electrochemical techniques.It is shown that the Pd/C catalyst is active for glycerol electrooxidation.However,the oxide-Pd/C catalysts are even better in terms of the onset potential that is more negative and peak current density.The ratio of oxide to Pd is optimized according to the electrochemical measurement.The results reveal that the addition of oxide into the Pd/C induces the synergistic effect for glycerol electrooxidation.

Go to article

Fabrication Of Gold Electrode Array Based On Co_2 Laser Ablation, Wei Zhang, Jiang-Qun Xiao, Yong-Liang Zhou Nov 2006

Fabrication Of Gold Electrode Array Based On Co_2 Laser Ablation, Wei Zhang, Jiang-Qun Xiao, Yong-Liang Zhou

Journal of Electrochemistry

A rapid process is described to produce single or multiple electrodes of any shape based on CO_(2) laser ablation for microfluidic chip.The method is as follow: coating a kind of material as sacrifice layer on a piece of glass with sputtered Cr and Au;designing the needed pattern on a computer;selecting proper parameters and ablating with CO_(2) laser;wiping of Au/Cr and sacrifice layer,and obtain electrodes at last.The microfluidic chip was gotten by reversely bonding with a piece of PDMS,and sealing around with PDMS prepolymer.The mask' effect is the main factor that influencing electrode quality.The width of electrodes could be 100 μm.Demonstrated …

Go to article

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai Nov 2006

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai

Journal of Electrochemistry

A new electroactive polynuclear inorganic compound of rare earth metal hexacyanoferrate,gadolinium hexacyanoferrate(GdCHF),was prepared by electrochemically deposition on the surface of a glassy carbon electrode with a potential cycling procedure.The result of SEM indicated that the GdHCF was in the form of particles adhered on the surface of electrode.There were two different shapes and sizes of GdHCF forming on the surface of electrode.FTIR spectrum of GdHCF showed a very strong and sharp peak,which located at 2062.5 cm~(-1) and corresponded to the stretching vibration of the C≡N group in the GdHCF.The cyclic voltammetric results indicated that the GdHCF/GC electrode exhibited two pairs …

Go to article

Calcined Temperatures Influence On Synthesis And Electrochemistry Charactarization Of Li[Ni_(0.475)Mn_(0.475)Co_(0.05)]O_(2) For Li-Ion Batteries, Li-Qin Wang, Li-Fang Jiao, Hua-Tang Yuan Aug 2006

Calcined Temperatures Influence On Synthesis And Electrochemistry Charactarization Of Li[Ni_(0.475)Mn_(0.475)Co_(0.05)]O_(2) For Li-Ion Batteries, Li-Qin Wang, Li-Fang Jiao, Hua-Tang Yuan

Journal of Electrochemistry

Layered Li[Ni_(0.475)Mn_(0.475)Co_(0.05)]O_(2) materials have been prepared by a solid-state pyrolysis method.Experiments of XRD,SEM,cyclic voltammetry and charge/discharge cycling were carried out.It can be learned that when calclined at 800 ℃,the sample showed the highest first discharge capacity of 178.8 mAh·g~(-1) at a current density of 20 mA/g in the voltage range 2.3~4.6 V.

Go to article

Immobilization Of Cytochrome C On The Surface Of Single-Wall Carbon Nanotube And Its Direct Electron Transfer And Electrocatalysis, Ya-Jing Yin, Ya-Fen Lv, Ping Wu, Pan Du, Yan-Mao Shi, Chen-Xin Cai Aug 2006

Immobilization Of Cytochrome C On The Surface Of Single-Wall Carbon Nanotube And Its Direct Electron Transfer And Electrocatalysis, Ya-Jing Yin, Ya-Fen Lv, Ping Wu, Pan Du, Yan-Mao Shi, Chen-Xin Cai

Journal of Electrochemistry

Cytochrome c(Cyto c) was immobilized on the surface of the single-wall carbon nanotube(SWNT) by using the method of adsorption.Infrared spectroscopy indicated that the Cyto c remained in its original structure and did not undergo structural change after its immobilization on the SWNT.The direct electrochemistry of cyto c,which was adsorbed on the surface of the SWNT,was studied by cyclic voltammetry.The voltammetric results demonstrated that the SWNT had promoting effects on the direct electron transfer of Cyto c and also indicated that the immobilized Cyto c retained its bioelectrocatalytic activity to the reduction of H_(2)O_(2).This modified electrode might be used in development …

Go to article

Electrochemical Behavior Of Electrolytic Manganese Dioxide In Mgso_(4) Solution, Dan-Mei Yu, Yu-Jun Si, Chang-Guo Chen, Yu-Ping Liu, Yan Liu Aug 2006

Electrochemical Behavior Of Electrolytic Manganese Dioxide In Mgso_(4) Solution, Dan-Mei Yu, Yu-Jun Si, Chang-Guo Chen, Yu-Ping Liu, Yan Liu

Journal of Electrochemistry

The rechargeability and crystal structure changing of electrolytic manganese dioxide(EMD) in MgSO_(4) electrolyte were investigated by cyclic voltammetry,galvanostatic charge/discharge and X-ray diffraction.The results have shown that the EMD has good rechargeability;after several initial cycles,the charge and discharge became stability;after discharge,the γ-MnO_(2) structure of EMD was changed,the production was reversible and could be recharged to γ-MnO_(2) structure again which ensured the rechargeability of EMD.

Go to article

Electrodeposition Of Nano-Sb-Zn Alloy In Acetamide-Urea-Nabr-Kbr Melt, Peng Liu, Xin-Ai Guo, Ye-Xiang Tong, Qi-Qin Yang Aug 2006

Electrodeposition Of Nano-Sb-Zn Alloy In Acetamide-Urea-Nabr-Kbr Melt, Peng Liu, Xin-Ai Guo, Ye-Xiang Tong, Qi-Qin Yang

Journal of Electrochemistry

The electroreduction of Zn(II) and Sb(III) in acetamide-urea-NaBr-KBr(343 K) were studied by cyclic volatmmetry.The reduction of Zn(II) or Sb(III) to the metals is an irreversible process.The transfer coefficient of Zn(II)+2e→Zn and Sb(III) +3e→Sb were calculated to be 0.231 and 0.319,the diffusion coefficient of Zn(II) and Sb(III) in the melt were determined as 1.70 10~(-6) and 3.21 10~(-6) cm~(2)· s~(-1) respectively.The Zn-Sb films with different Zn content from 29.67 at% to 97.34 at% were electrodeposited in acetamide-urea-NaBr-KBr melt at 343 K by controlling the deposition potential and the Zn(II)/Sb(III) molar ratio.The morphology of Zn-Sb film was observed by SEM.Zn-Sb film comprises …

Go to article

Investigation On The Resistance To Electrochemical Oxidation Of Carbon Nanotubes With Various Diameters, Yu-Yan Shao, Ge-Ping Yin, Yun-Zhi Gao, Peng-Fei Shi Aug 2006

Investigation On The Resistance To Electrochemical Oxidation Of Carbon Nanotubes With Various Diameters, Yu-Yan Shao, Ge-Ping Yin, Yun-Zhi Gao, Peng-Fei Shi

Journal of Electrochemistry

The resistance to electrochemical oxidation of multi-wall carbon nanotubes(CNT) with various diameters is investigated by applying a fixed potential of 1.2 V(RHE) for 120 h in 0.5 mol L~(-1) H_(2)SO_(4).The oxidation current of CNTs decreases with their diameters,but CNTs between 10~20 nm in diameter(D1020) shows the lowest oxidation current.XPS analysis shows that,after oxidation,the increase in surface oxygen for D1020 is the smallest,implying that the oxidation degree for D1020 is the lowest.The conclusion can be reached that CNTs between 10~20 nm in diameter are the most resistant to electrochemical oxidation.The difference in electrochemical stability of CNTs is attributed to the difference …

Go to article

Pre-Oxidative Amperometric Glucose Biosensor Incorporated With Carbon Nanotube And Pbo_(2), Hong-Lan Qi, Cheng-Xiao Zhang Aug 2006

Pre-Oxidative Amperometric Glucose Biosensor Incorporated With Carbon Nanotube And Pbo_(2), Hong-Lan Qi, Cheng-Xiao Zhang

Journal of Electrochemistry

A pre-oxidative amperometric glucose biosensor incorporated with carbon nanotube,ferrocenemonocarboxylic acid and PbO_(2) was designed.The interferences coming from reduced substances,such as ascoribic acid and urine acid were eliminated by PbO_(2).The oxidative current is linear at the potential of +0.40 V(vs.SCE) to the concentration of glucose in the range from 0.50 to 20 mmol·L~(-1),and the detection limit of glucose is 0.1 mol L~(-1).The relative standard deviation is 3.3% for seven successive assays at 5.0 mmol·L~(-1)glucose.This biosensors have been applied to determination of the glucose in serum with satisfying results.

Go to article

Study On The Preparetion And Electrochemical Beavior Of Nitrogen Doped Tetrahedral Amorphous Carbon Electrode, Ke Liu Aug 2006

Study On The Preparetion And Electrochemical Beavior Of Nitrogen Doped Tetrahedral Amorphous Carbon Electrode, Ke Liu

Journal of Electrochemistry

taC∶N films are a good materials for semiconductor electrodes.But further studies are hampered by the ohmic contact problem,which occurs between the silicon and the lead.By studying the influence of heat treatment on the film's property,it is believed that ohmic contact should be made on the silicon first,and then the film be deposited.A set of taC∶N electrodes with various nitrogen content have been prepared.CV study indicates that the cathodic limits move slowly to positive direction.while the anodic limits are unchanged with the increasing of nitrogen content.As a result,the electrochemical windows get narrow either.

Go to article

Voltammetric Behavior And Its Determination Of Acetaminophen At Poly (Congo Red) Modified Electrode, Hong-Bin Luo, Ya-Feng Zhang, Wei Chen, Xin-Hua Lin Aug 2006

Voltammetric Behavior And Its Determination Of Acetaminophen At Poly (Congo Red) Modified Electrode, Hong-Bin Luo, Ya-Feng Zhang, Wei Chen, Xin-Hua Lin

Journal of Electrochemistry

Cyclic voltammetry was used to prepare poly(Congo Red) film on glassy carbon electrode and to study the electrochemical behavior of acetaminophen on poly(congo red) modified electrode.Experimental resultal shows that the poly(congo red) modified electrode exhibits excellent electrocatalytic effect on the oxidation of acetaminophen.The peak currents of linear sweep voltammogram are linear to the acetaminophen concentrations over the range of 2.0×10~(-7) ～2.0×10~(-6) mol·L~(-1).The detection limit has been estimated to be 4.0×10~(-8) mol·L~(-1).This method can be used for the determination of acetaminophenin real sample.

Go to article

The Influence Of Pva As Disperser On Lifepo_(4) Synthesized By Hydrothermal Reaction, Hui-Lin Li, Hui Zhan Aug 2006

The Influence Of Pva As Disperser On Lifepo_(4) Synthesized By Hydrothermal Reaction, Hui-Lin Li, Hui Zhan

Journal of Electrochemistry

LiFePO_(4) was synthesized by means of hydrothermal reaction,in which PVA acts as disperser and glucose as carbon source.The samples were characterized by X-ray diffraction,scanning electron microscopy and electrochemical measurement.SEM results show that the sample is homogeneously composed of grains with a particle size of ca.200nm.In the charge/discharge test,the products exhibited a 3.45V discharge voltage plateau and a maximum specific capacity of 140mAh/g.After 40 cycles,its capacity only declined by 2.1%.Besides these,the mechanism for the influence of the particle size and carbon coating on the electrochemical property of LiFePO_(4)material was discussed in detail.

Go to article

Study On The Microstructure Of Pb-Sn Alloy Obtained From Quasi-Two-Dimensional Electrodeposition, Bin Sun Aug 2006

Study On The Microstructure Of Pb-Sn Alloy Obtained From Quasi-Two-Dimensional Electrodeposition, Bin Sun

Journal of Electrochemistry

A two-layered structure of eutectic-solid sulotion is formed in the microstructure of Pb-Sn alloy obtained from quasi-two-dimensional electrodeposition.It is showed that this unique structure is caused by the variation of the current density on the growth interface.When the interface is located in the front of the whole deposits,the current density is high.So the Pb and Sn can deposit together and the eutectic texture forms.When the interface is in the rear of the whole deposits,the current density is low.At this moment the electrodeposition of Pb is the dominant reaction,and the Pb-based solid solution appears.

Go to article

Influence Of Crystallinity On The Kinetics Of Li Ion Insertation And Deinsertation In Spinel Limn_(2)O_(4), Rong-Hua Zeng, Dong-Sheng Lv, Wei-Shan Li Aug 2006

Influence Of Crystallinity On The Kinetics Of Li Ion Insertation And Deinsertation In Spinel Limn_(2)O_(4), Rong-Hua Zeng, Dong-Sheng Lv, Wei-Shan Li

Journal of Electrochemistry

Two spinel lithium manganese oxides of different crystallinity were prepared by sol-gel process and were studied by using inducfively coupled plasma,X-ray diffraction,scaning electron micrographs,constant charging and discharging,cyclic voltammetry and electrochemical impedance spectrometry,the results show that the sample treated under 700 ℃ has higher crystallinity than the sample treated under 500 ℃,however,the sample with lower crystallinity has higher discharge capacity and better cyclic performance that due to quicker charge exchange speed and quicker diffusion speed of Li-ion.

Go to article

Studies On Performance And Electrode Materials For All Vanadium Flow Battery, Yuan Jun Aug 2006

Studies On Performance And Electrode Materials For All Vanadium Flow Battery, Yuan Jun

Journal of Electrochemistry

In this paper,cyclic voltammetry has been used to study the electrochemical performance of the treated and untreated graphite,soft graphite and PAN-carbon cloth in vanadium sulfate solution.The results show that: the reversibility of reaction can be improved on the surface of treated electrode,and the current can also increase;the electrochemical performance of treated electrode is remarkably enhanced;in the process of charge/discharge,the charge current can reach up to 20 mA/cm~(2),and discharge current up to 15 mA/cm~(2);surface morphology of the treated and untreated graphite show that the treatment can change the surface structure of electrode and also add the reaction area.

Go to article

Studies On Synthesis And Electrochemical Performance Of Li_(X)Ni_(1/3)Mn_(1/3)Co_(1/3)O_(2) As Cathode Material For Lithium Ion Batteries, Xiao-Jian Guo, Jie Li, Yi-Xiao Li, Yong Yang Aug 2006

Studies On Synthesis And Electrochemical Performance Of Li_(X)Ni_(1/3)Mn_(1/3)Co_(1/3)O_(2) As Cathode Material For Lithium Ion Batteries, Xiao-Jian Guo, Jie Li, Yi-Xiao Li, Yong Yang

Journal of Electrochemistry

A series of LiNi_(1/3)Mn_(1/3)Co_(1/3)O_(2) were synthesized by a combined hydroxides coprecipitation and calcination method.Effects of synthesizing temperature of coprecipitations and the Li∶M ratios on structure and electrochemical performance of the materials were studied.The results showed that materials synthesized with coprecipitation at room temperature(~20 ~(o)C) delivered the best electrochemical performance.Another series of cathode materials Li_(x)Ni_(1/3)Mn_(1/3)Co_(1/3)O_(2) with different Li∶M ratios were synthesized with this method.The results showed that sintering at high temperature could cause loss of LiOH,thus more LiOH should be added.It is demonstrated that Li_(1.08)Ni_(1/3)Mn_(1/3)Co_(1/3)O_(2) had the best electrochemical performance.

Go to article

The Property Study Of Libob-Pc/Dec Electrolyte, Ying-Kun Ning, Bi-Tao Yu, Fu-Shen Li, Wei-Hua Qiu Aug 2006

The Property Study Of Libob-Pc/Dec Electrolyte, Ying-Kun Ning, Bi-Tao Yu, Fu-Shen Li, Wei-Hua Qiu

Journal of Electrochemistry

The new electrolyte salt LiBOB for Li-ion battery was synthesized in laboratory,and series of electrolytes of LiBOB and PC/DEC was compounded.The conductivity of the electrolytes was compared by changing the temperature and concentration.The cycling performance of charging-discharging was also compared by the charging-discharging test,the results showed that the varying regularity of conductivities and cycling stability and capacity were not always identical,but there were a suitable electrolyte for Li/ARG cell.The A.C.impedance and CV were used to test the compatibility of the most suitable electrolyte and ARG anode.Conclusion can be drawn that the ARG anode can be protected very well by SEI …

Go to article

Recycling Of The Spent Nickel-Cadmium Batteries Based On Bioleaching Process, Liang-Shu Xia, Shi-Fu Fu, Zhong-Qing Chen Aug 2006

Recycling Of The Spent Nickel-Cadmium Batteries Based On Bioleaching Process, Liang-Shu Xia, Shi-Fu Fu, Zhong-Qing Chen

Journal of Electrochemistry

Less than 1 percent of discarded dry batteries are recovered in china.it is necessary to find an economic,fast and environmentally friendly process to recycle spent dry batteries.Bioleaching is better one of the few technology applied for the recovery of the toxic metals from hazardous spent batteries.In this study,after the acidified sludge made by the inoculated and cultured indigenous sewage sludge was acted as leaching bacteria species,the influence of the different pH values,the different residence time of the sludge in bioreactor(RTB),the leaching time,whether or not adding Fe(iron powder) to the leaching liquid on the leaching rate of Ni,Cd was tested.The results …

Go to article

Research Of Explosion Mechanism Of Lithium-Ion Battery, Yu-Hong Chen, Zhi-Yuan Tang Aug 2006

Research Of Explosion Mechanism Of Lithium-Ion Battery, Yu-Hong Chen, Zhi-Yuan Tang

Journal of Electrochemistry

The heat character of Lithium-ion battery materials and explosion mechanism of Lithium-ion cells under the overcharge,short-circuit and other abuse behavior are tested by C_(80) calorimeter,_()DSC and charge-discharge instrument.SEI reactions,Li_xC_(6)/electrolyte and Li_xC_(6)/PVDF reactions take place at the anodes.Electrolyte and solvent reactions happen after 178℃ and Li_(1-x)Co_(1/3)Ni_(1/3)Mn_(1/3)O_(2) decomposes after 230℃.The batteries explode at 150℃ oven test or 1.5C,5.5 V overcharge and do not explode at short-circuit.

Go to article

Next Last