Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

PDF

Nanoscience and Nanotechnology

2007

Articles 1 - 19 of 19

Full-Text Articles in Engineering Science and Materials

Modelagem Da Vida De Fadiga E Do Acúmulo De Deformações Permanentes Em Pavimentos Asfálticos Por Meio De Um Modelo De Dano Contínuo, Victor Ferreira Teixeira, Flavio V. Souza, Jorge Barbosa Soares Dec 2007

Modelagem Da Vida De Fadiga E Do Acúmulo De Deformações Permanentes Em Pavimentos Asfálticos Por Meio De Um Modelo De Dano Contínuo, Victor Ferreira Teixeira, Flavio V. Souza, Jorge Barbosa Soares

Department of Mechanical and Materials Engineering: Faculty Publications

: It is known that the conditions of the Brazilian roadways have an enormous impact over the national economy. In face of this problem, there is a need for new methodologies for pavement analyses and design that can more accurately predict pavement distresses. Among the main methods currently used, one can find purely empirical methods and mechanistic-empirical methods which make use of the pavement structure response. The evolution of numerical methods such as the Finite Element Method (FEM) or the Boundary Element Method (BEM) has made the mechanistic-empirical methods more popular for pavement analysis applications. This work shows a mechanistic …

Go to article

Study On Electrochemical Impedance Spectroscopy Of Carbon Steel Eroded In Methyldiethanolamine Solution, Dong-Ping Wei, Rong-Zong Hu, Dan-Mei Pan, Wei-Xiong Huang, Rui Dong Nov 2007

Study On Electrochemical Impedance Spectroscopy Of Carbon Steel Eroded In Methyldiethanolamine Solution, Dong-Ping Wei, Rong-Zong Hu, Dan-Mei Pan, Wei-Xiong Huang, Rui Dong

Journal of Electrochemistry

Corrosion behavior of carbon steel in methyldiethanolamine(MDEA) solution was investigated by Electrochemical Impedance Spectroscopy(EIS).The results were showed that the corrosion rate of carbon steel in solution containing dissolved oxygen is higher than that in solution removed of dissolved oxygen before cathodic activation.They were reversed after cathodic activation.The corrosion rate is increased at first and then decreased when the concentration of MDEA is increased in the blank solutions.In the simulated solutions containing quantities of!heat-stable salts(HSS),the corrosion rate is decreased monotonously with increase of the MDEA concentration.As anodic polarization potential is increased,the EIS of carbon steel in HSS simulated solution showed characteristics …

Go to article

Determination Of Malathion Based On Carbon Nanotubes Modified Electrode Incorporating Acetylcholinesterase, Lu Zhang, Yao-Dong Zhang, Hong-Lan Qi Nov 2007

Determination Of Malathion Based On Carbon Nanotubes Modified Electrode Incorporating Acetylcholinesterase, Lu Zhang, Yao-Dong Zhang, Hong-Lan Qi

Journal of Electrochemistry

A biosensor for determination of organophosphorus pesticide based on the acetylcholinesterase and multi-wall carbon nanotubes modified electrode is fabricated.Under the optimal conditions,the chronoamperometric current at +0.70V(vs.SCE) increased linearly with the concentration of malathion in the range from 6.0×10-10 to 6.0×10-9 mol·L-1 with a detection limit of 1.0×10-10 mol·L-1.The recoveries of malathion in lake water is 97% to 105% determinated by this method.

Go to article

The Syntheses And Electrochemical Performance Of Nano-Mno_2 For Supercapacitor, Jun Ma, Ming-Sen Zheng, Quan-Feng Dong Aug 2007

The Syntheses And Electrochemical Performance Of Nano-Mno_2 For Supercapacitor, Jun Ma, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

Nano-manganese dioxide were prepared by two different methods which are low temperature solid reaction and chemical deposition.The products were characterized by XRD,SEM,BET and constant current charge-discharge tests.The result shows that there is a close relationship between specific capacitance and BET surface areas.Meanwhile the specific capacitance was impacted little by the structure of the nano-manganese dioxides.However,the product performance of high rates,was influenced by structure,the higher rate can be obtained with the more perfect crystal structure.

Go to article

Growth Mechanism And Morphology Of Electrodeposited Micro-Nanocrystalline Iron, Qiao-Xin Zhang, Jia-Ming Zhang, Li-Ning Yang Aug 2007

Growth Mechanism And Morphology Of Electrodeposited Micro-Nanocrystalline Iron, Qiao-Xin Zhang, Jia-Ming Zhang, Li-Ning Yang

Journal of Electrochemistry

Effects of current density,reaction temperature,electrolyte concentration and surfactant on the electrochemical deposition of micro-nanocrystalline iron were studied.Morphologies and structures of the samples were characterized by SEM and XRD,the results showed that the electrodeposits is slice α-Fe under little current and the density,lower temperature and higher concentration,and the dentritic α-Fe is under opposite conditions,but the influence from surfactant is unconsicously.Moreover,the growth mechanism of the electrodeposits was also analysed here.

Go to article

Fabrication And Charaterization Of Nitrogen-Doped Tio_2 Nanotube Array And Its Visible Light Activity, Hui-Fang Zhuang, Yue-Kun Lai, Jing Li, Lan Sun, Chang-Jian Lin Aug 2007

Fabrication And Charaterization Of Nitrogen-Doped Tio_2 Nanotube Array And Its Visible Light Activity, Hui-Fang Zhuang, Yue-Kun Lai, Jing Li, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Nitrogen-doped TiO2 nanotube array was fabricated by an electrochemical anodic oxidation followed a wet process.XPS result indicates that the nitrogen atoms were doped into lattice of TiO2 nanotubes.The UV-Vis spectra show that the photoabsorption of N-doped TiO2 nanotube array film is enhanced in the visible light region.Compared with the TiO2 nanotube array film,the N-doped TiO2 nanotubes exhibite a higher photocatalytic activity which is evaluated by the decomposition rate of methyl orange using the tungsten-halogen lamp as light source.

Go to article

Electrocatalytic Oxidation Of Methanol At The Nano Ni-B Amorphous Alloy Powdermicroelectrode, Yi-Xiong Zheng, Shi-Bing Yao, Shao-Min Zhou Aug 2007

Electrocatalytic Oxidation Of Methanol At The Nano Ni-B Amorphous Alloy Powdermicroelectrode, Yi-Xiong Zheng, Shi-Bing Yao, Shao-Min Zhou

Journal of Electrochemistry

Electrocatalytic oxidation of methanol at the nano Ni-B amorphous alloy powder-microelectrode in alkaline media was studied by using cyclic voltammetry.Compared to the highly preferred orientation(220) nickel electrode,The onset potential of methanol electrooxidation at the nano Ni-B microelectrode is negatively shifted about 0.04V,and the current density is increased approximately by 2 orders of magnitude.Thus,the nano Ni-B microelectrode has very strong electrocatalytic activity for the oxidation of methanol.The kinetic parameters were determined with the steady polarization curves.The results show that the rate constants for both the oxidation of Ni(Ⅱ) to Ni(Ⅲ) and the reduction of Ni(Ⅲ) to Ni(Ⅱ) at the nano Ni-B …

Go to article

Template Synthesis And Electrochemical Studies Of Ag_(Core)Au_(Shell) Nanowires, Li Ling, Ya-Xian Yuan, Min-Min Xu, Jian-Lin Yao, Ren-Ao Gu May 2007

Template Synthesis And Electrochemical Studies Of Ag_(Core)Au_(Shell) Nanowires, Li Ling, Ya-Xian Yuan, Min-Min Xu, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

Agcore Aushell nanowires with different thicknesses were prepared by combining template synthesis and chemical reduction method,and characterized by SEM and cyclic voltammetry(CV).The CV results revealed that the AgcoreAushell nanowires with pinhole were transferred to pinhole free structure after several potential scans.By using thiophenol(TP)and p-aminothiophenol(PATP)as probe,the surface enhanced Raman scattering(SERS)effect was investigated on the core-shell nanowires.The results indicated that AgcoreAushell nanowires could be served as a potential SERS substrate,and the difference in the spectral feature of PATP adsorbed onto Au and Ag nanowires enable us to diagnose the pinhole effect of core-shell nanowires by SERS.

Go to article

Determination Of Ddopamine And Ascorbate On Gold Nanoparticle And 4,4-Bis (Methanethiol) Biphenyl (Mtp) Self-Assembled Monolayer Modified Gold Electrode, Hai-Yan Wang, Peng Liu, Ye Wang, Bao-Kang Jin May 2007

Determination Of Ddopamine And Ascorbate On Gold Nanoparticle And 4,4-Bis (Methanethiol) Biphenyl (Mtp) Self-Assembled Monolayer Modified Gold Electrode, Hai-Yan Wang, Peng Liu, Ye Wang, Bao-Kang Jin

Journal of Electrochemistry

A new approach to construct an ampermetric biosensor was described.The 4,4-bis(methanethiol)biphenyl(MTP)is adsorbed on to a bare gold electrode to make self-assembled monolayers(MTP/Au SAMs).Then electrodeposited 2mg/mL HAuCl4 at-200 mV,NG/MTP/Au electrode was prepared.When a differential pulse voltammetric(DPV)technique was used,the peak separation between DA and AA is 155 mV.Hence,the selective determination of dopamine(DA)and ascorbate(AA)in the binary mixture system can be performed.Under the chosen conditions,the peak currents are correspondent linearly to the concentrations of DA and AA in the range of 5.0×10-7~1×10-4 mol·L-1 and 3.5×10-6~1.0×10-3mol·L-1,respectively.The correlation coefficients were 0.998.The detection limit were 1.5×10-7 mol·L-1 and 1.2×10-6 mol·L-1for DA and AA.

Go to article

Catalysis Of Nano Tio_2 For Horseradish Peroxidase, Ya-Qi Zhu, Hai Wu, Hiu Liu, Jie Ma May 2007

Catalysis Of Nano Tio_2 For Horseradish Peroxidase, Ya-Qi Zhu, Hai Wu, Hiu Liu, Jie Ma

Journal of Electrochemistry

Horseradish peroxidase immobilized on the surface of titanium dioxide nanoparticles and nanotube modified glassy carbon electrode.The HRP direct electron transfer reaction was compared between TiO2 nanoparticles and nanotube GC electrode.The results demonstrated that the HRP on TiO2 nanotube /GC electrode could catalyze electron exchange reaction between electroactivity center of HRP and electrode.And the research of antibody labeled HRP provides a selected signal for antibody-antigen immunoassay.

Go to article

Study On The Electrogeneration And Properties Of Superoxide Ion In Aprotic Media By Using Carbon Nanotubes Powder Microelectrode, Ying-Liang Wei, Chen Shao, Hui Feng May 2007

Study On The Electrogeneration And Properties Of Superoxide Ion In Aprotic Media By Using Carbon Nanotubes Powder Microelectrode, Ying-Liang Wei, Chen Shao, Hui Feng

Journal of Electrochemistry

Multi-wall carbon nanotubes are filled in the cavity at the tip of a microelectrode to form a carbon nanotubes powder microelectrode(CNTs-PME).The CNTs-PME is used to study the electrochemical reduction of oxygen in aprotic media.It is a nearly reversible redox process of the O2/O·-2 couple at the CNTs-PME in the dimethyl sulfoxide(DMSO)solution.The heterogeneous electron transfer rate constant(ks)can be measured by steady-state voltammogram and the result is 9.8 10-3cm /s.As a weak oxidant,the reaction of O·-2 with epinephrine was studied by cyclic voltammetry.Additionally,the reaction of O·-2 with benzoic acid was also discussed in detail.

Go to article

Preparation And Lithium Storage Performance Of Nano-Structural Sno_2/Carbon Nanotubes Composite Electrodes, Hong-Bing Wei, Ling Huang, Xiao-Bin Wu, Fu-Sheng Ke, Jin-Shu Cai, Xiao-Yong Fan, Fang-Zu Yang, Shi-Gang Sun Feb 2007

Preparation And Lithium Storage Performance Of Nano-Structural Sno_2/Carbon Nanotubes Composite Electrodes, Hong-Bing Wei, Ling Huang, Xiao-Bin Wu, Fu-Sheng Ke, Jin-Shu Cai, Xiao-Yong Fan, Fang-Zu Yang, Shi-Gang Sun

Journal of Electrochemistry

The Nano-structural SnO2/Carbon Nanotubes Composites were prepared in a solution of SnCl2,ethylene glycol(EG),purified MWCNTs and sodium dodecyl sulfate(SDS) at 160 ℃.The phase structure and surface morphology of the composites were measured by XRD HRTEM and SEM.The results indicate that there are high dispersions and high loadings of SnO2 nanoparticles on MWCNTs.Electrochemical lithium storage performance was studied preliminarily on the obtained samples.MWCNTs modified with SnO2 nanoparicles were shown to have a higher electrochemical reversible capacity than that of MWCNTs during the charge and discharge process.MWCNTs can accommodate the larger structure strain of the active materials produced during Li-ion insertion and extraction,which …

Go to article

Comparison Of The Electrochemical Reactivity Of Electrodes Modified By Carbon Nanotubes With Different Sizes, Guo-Feng Yang, Neng-Qin Jia, Zhi-Yong Wang Feb 2007

Comparison Of The Electrochemical Reactivity Of Electrodes Modified By Carbon Nanotubes With Different Sizes, Guo-Feng Yang, Neng-Qin Jia, Zhi-Yong Wang

Journal of Electrochemistry

The electrochemical activity of multi-walled carbon nanotubes(MWNTs) with different sizes,including four different MWNTs with the same length and different diameter,two different MWNTs with the same diameter and different length has been assessed and compared.The various MWNTs modified electrodes were prepared by immobilizing the suitable amount of MWNTs onto a glassy carbon electrode,and their voltammetric responses to ferricyanide,uric acid and dopamine were examined.The corresponding cyclic voltammetric data was showed that the electrochemical and electrocatalytic activities are depended on the nanotube length.The electrochemical reactivity of short MWNT(S-MWNT) is better than that of long MWNT(L-MWNT),which may be mainly attributed to the existence of …

Go to article

Origin Of Photomultiplication In C60 Based Devices, Jinsong Huang, Yang Yang Jan 2007

Origin Of Photomultiplication In C60 Based Devices, Jinsong Huang, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

In this manuscript, the origin of the photomultiplication effect was studied in C60 based devices by evaluating the wavelength dependent external and internal quantum efficiencies under various biases. The effect of materials with disordered structures on the photomultiplication effect was determined by intentionally integrating both ordered and disordered material structures into one organic solar cell device with a configuration of indium tin oxide/poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS)/pentacene/C60 fullerene/bathocuproine (BCP)/Al. Our results show that both the disordered structure of C60 and the charge trapping effect at the C60 /PEDOT:PSS interface contribute to the photomultiplication effect. By studying the C60-only …

Go to article

A Scientific Foundation Of Collaborative Engineering, S. C.-Y. Lu, W. Elmaraghy, G. Schuh, R. Wilhelm Jan 2007

A Scientific Foundation Of Collaborative Engineering, S. C.-Y. Lu, W. Elmaraghy, G. Schuh, R. Wilhelm

Department of Mechanical and Materials Engineering: Faculty Publications

Collaborative engineering is the practical application of collaboration sciences to the engineering domain. In today’s highly connected technology-driven economy, the production industry must rely on the best practices of collaborative engineering to stay competitive when designing, manufacturing, and operating complex machines, processes, and systems on a global scale. Despite its importance, collaborative engineering is currently more of a practiced art than a scientific discipline. A better understanding of how engineers should collaborate with all stakeholders to accomplish complex tasks that fulfill our increasing social responsibilities is a grand challenge. However, because we currently lack well-defined sciences of human collaboration, we …

Go to article

Improved Hole-Injection Contact For Top-Emitting Polymeric Diodes, Juo-Hao Li, Jinsong Huang, Yang Yang Jan 2007

Improved Hole-Injection Contact For Top-Emitting Polymeric Diodes, Juo-Hao Li, Jinsong Huang, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

In this letter, an efficient hole-injection contact was achieved for the top-emitting polymeric light-emitting diodes (PLEDs). The anode has a structure of metal/molybdenum oxide/ poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS). It has been found that hole injection was significantly improved by inserting a thin layer of MoO3 between aluminum and PEDOT:PSS. An ultraviolet photoelectron spectroscopy (UPS) was used to investigate the change of work function, and photovoltaic measurement confirmed that the improved hole injection is due to the reduction of barrier height, resulted from the addition of transition metal oxide. PEDOT:PSS layer was found necessary in anode structure to further enhance the …

Go to article

Low Voltage And Fast Speed All-Polymeric Optocouplers, Yan Yao, Hsiang-Yu Chen, Jinsong Huang, Yang Yang Jan 2007

Low Voltage And Fast Speed All-Polymeric Optocouplers, Yan Yao, Hsiang-Yu Chen, Jinsong Huang, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

An all-polymeric optocoupler has been demonstrated with a polymer light-emitting diode (PLED) as the light source (input unit) and a polymer/fullerene photodiode (PD) as the detector (output unit). The electroluminescence (EL) peak of the PLED is 560 nm, and the entire EL spectrum is within the response range of the PD. The optocoupler can work at low driving voltages, 5 V on the PLED and 0 V on the PD. The output photocurrent increases linearly with input current, and the current density transfer ratio reaches 1.5%. The frequency response of the optocoupler is at 500 kHz. With comparable performance to …

Go to article

Deck-Mounted Steel Post Barrier System, John D. Reid, Ronald K. Faller, Jason A. Hascall Jan 2007

Deck-Mounted Steel Post Barrier System, John D. Reid, Ronald K. Faller, Jason A. Hascall

Department of Mechanical and Materials Engineering: Faculty Publications

An existing mountable safety barrier system, previously crash tested successfully on a wood bridge deck, was evaluated for use on a fiber reinforced plastic (FRP) bridge deck. In an attempt to avoid expensive full-scale crash testing, components of the existing system were evaluated using worst case conditions on two dynamic bogie crash tests and a series of computer simulations using nonlinear finite-element analysis. Simulation results closely approximated the physical results, with both displaying similar deformation, damage, and force levels. Both testing and simulation demonstrated that the barrier should function sufficiently if used on the FRP deck system. Further, the development …

Go to article

Regional Mechanical Properties And Stress Analysis Of The Human Anterior Lens Capsule, Ryan M. Pedrigi, G. David, J. Dziezyc, J. D. Humphrey Jan 2007

Regional Mechanical Properties And Stress Analysis Of The Human Anterior Lens Capsule, Ryan M. Pedrigi, G. David, J. Dziezyc, J. D. Humphrey

Department of Mechanical and Materials Engineering: Faculty Publications

The lens capsule of the eye functions, in part, as a deformable support through which the ciliary body applies tractions that can alter lens curvature and corresponding refractive power during the process of accommodation. Although it has long been recognized that characterization of the mechanical properties of the lens capsule is fundamental to understanding this physiologic process as well as clinical interventions, prior data have been limited by one-dimensional testing of excised specimens despite the existence of multiaxial loading in vivo. In this paper, we employ a novel experimental approach to study in situ the regional, multiaxial mechanical behavior of …

Go to article