Open Access. Powered by Scholars. Published by Universities.®
Engineering Science and Materials Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Explosives (2)
- Western Australia (2)
- <p>Dump trucks -- Vibration -- Measurement<br />Mining machinery -- Vibration -- Measurement<br />Damping (Mechanics)<br /> -- Vibration -- Prevention</p> (1)
- Ancient Egyptian tombs (1)
- Anisotropy (1)
-
- Aquifers (1)
- Blast Loading (1)
- Blast Resistant Glazing System (1)
- Bulk Material (1)
- Coal mining (1)
- Composite Recycle (1)
- Deliminator (1)
- Development (1)
- Dragline (1)
- Dump Truck (1)
- Dumping Height (1)
- Dynamic (1)
- Dynamic Response (1)
- Energy research (1)
- Engineering (1)
- Equipment (1)
- Farms (1)
- Government energy policy (1)
- Granular Material Volume Measurement (1)
- Ground strain (1)
- HISLO (1)
- High Mn steel (1)
- History of metallurgy (1)
- Hydraulic fracturing (1)
- Impact Force (1)
- Publication Year
- Publication
-
- Fathi Habashi (2)
- Journal of the Department of Agriculture, Western Australia, Series 4 (2)
- All Master's Theses (1)
- All Undergraduate Projects (1)
- Chemical Engineering Undergraduate Honors Theses (1)
-
- Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research (1)
- Doctoral Dissertations (1)
- Engineering Faculty Articles and Research (1)
- LSU Doctoral Dissertations (1)
- Libraries Faculty and Staff Scholarship and Research (1)
- Masters Theses (1)
- Mining Engineering Faculty Publications (1)
- Theses and Dissertations--Mining Engineering (1)
- Publication Type
Articles 1 - 15 of 15
Full-Text Articles in Engineering Science and Materials
Machinability Of High Mn Steel Using Tool Life Criteria, Dika Handayani, Victor F. Okhuysen, Nicole Wagner
Machinability Of High Mn Steel Using Tool Life Criteria, Dika Handayani, Victor F. Okhuysen, Nicole Wagner
Engineering Faculty Articles and Research
High Mn steel alloys have shown to provide both high strength and ductility. However, current literature offers limited guidance on the machinability of these steel alloys. Therefore, this work provides turning recommendations for high Mn steel that is based on tool life data. Several indexable carbide inserts with various rake angles were used to machine cast billets of high Mn steel. Turning characteristics from various feed rates, cutting speeds, and depths of cut were analyzed. Through a design of experiments, it was determined that the feed rate was the most significant factor affecting tool life and that a tool with …
Modeling Hydraulic Fracturing Initiation And Propagation In Porous Rock Formationsl, Chang Huang
Modeling Hydraulic Fracturing Initiation And Propagation In Porous Rock Formationsl, Chang Huang
LSU Doctoral Dissertations
Hydraulic fracturing has long been introduced to the oil and gas industry since the early nineteenth century for both reservoir characterization and reservoir stimulation. Despite the progress made in the last two decades, many challenges still have not been tackled regarding not only the propagation problem but also the initiation problem due to its complexity. The dissertation is divided into two stages, i.e., before and after fracture initiation. The first stage of the research aimed at improving the accuracy in solving the poro-mechanical response of wellbore during fluid injection before a tensile fracture occurs, which is crucial to determine the …
Feed Control: Composite Recycle, Rosy Perez
Feed Control: Composite Recycle, Rosy Perez
All Undergraduate Projects
The Boeing Company gave Central Washington University an opportunity for students to research and come up with an idea to reduce costs and landfill waste caused by the trimmings from the 777x composite wing pieces. The engineering and manufacturing for this project is about transporting composite material through to the delamination and chipper process. The delamination process uses a ram to press two claw shaped devices together that bends and deforms the material in opposite directions. The chipper process uses counter rotating saw blades spaced 1/8” apart to produce small shredded material. It is important for this newly designed feed …
Computational Dynamics And Virtual Dragline Simulation For Extended Rope Service Life, Muhammad Wardeh
Computational Dynamics And Virtual Dragline Simulation For Extended Rope Service Life, Muhammad Wardeh
Doctoral Dissertations
"The dragline machinery is one of the largest equipment for stripping overburden materials in surface mining operations. Its effectiveness requires rigorous kinematic and dynamic analyses. Current dragline research studies are limited in computational dynamic modeling because they eliminate important structural components from the front-end assembly. Thus, the derived kinematic, dynamic and stress intensity models fail to capture the true response of the dragline under full operating cycle conditions. This research study advances a new and robust computational dynamic model of the dragline front-end assembly using Kane's method. The model is a 3-DOF dynamic model that describes the spatial kinematics and …
Assessment Of Potential Impacts To Surface And Subsurface Water Bodies Due To Longwall Mining, Christopher R. Newman, Zacharias Agioutantis, Gabriel Boede Jimenez Leon
Assessment Of Potential Impacts To Surface And Subsurface Water Bodies Due To Longwall Mining, Christopher R. Newman, Zacharias Agioutantis, Gabriel Boede Jimenez Leon
Mining Engineering Faculty Publications
Ground movements due to longwall mining operations have the potential to damage the hydrological balance within as well as outside the mine permit area in the form of increased surface ponding and changes to hydrogeological properties. Recently, the Office of Surface Mining, Reclamation and Enforcement (OSMRE) in the USA, has completed a public comment period on a newly proposed rule for the protection of streams and groundwater from adverse impacts of surface and underground mining operations (80 FR 44435). With increased community and regulatory focus on mining operations and their potential to adversely affect streams and groundwater, now there is …
Haul Truck Tires Recycling, Jessica N. Lizarazu
Haul Truck Tires Recycling, Jessica N. Lizarazu
Chemical Engineering Undergraduate Honors Theses
The disposal of large Off-the-Road (OTR) tires is an increasingly important concern. These tires can weigh up to 8,450 pounds with an overall diameter and width of approximately 140.7 inches and 45.1 inches respectively. OTR tires are used for mining vehicles such as haul trucks, wheel loaders, backhoes, graders, and trenchers. These new tires cost between $38,000 and $50,000 each, depending on multiple factors including oil prices and the cyclical nature of the industry. Haul trucks contain six tires per vehicle, and mines replace these tires around every 9-12 months. Statistics regarding discarded OTR tires are not provided by the …
Mechanics Of Impulse Force Reduction For Mitigating Dump Truck Vibrations Under Hislo Conditions, Danish Ali
Mechanics Of Impulse Force Reduction For Mitigating Dump Truck Vibrations Under Hislo Conditions, Danish Ali
Masters Theses
"The deployment of large capacity shovels and dump trucks, for achieving economic bulk production capacities, has resulted in high impact shovel loading operations (HISLO). These large shovels generate high impact forces when loading dump trucks with over 100-ton passes under gravity. The impact forces also generate high frequency shock waves, which cause severe truck vibrations, and thus, expose dump truck operators to high levels of whole body vibrations (WBV). The dynamic impact force generates these vibrations, and thus, there is a need to develop efficient technologies to eliminate or reduce its impact. Existing literature and industry practice show that this …
Iron Pigments Through The Ages, Fathi Habashi
Iron Pigments Through The Ages, Fathi Habashi
Fathi Habashi
Evidence Of The Existence Of Cathodic And Anodic Zones During The Leaching Of Minerals And Metals, Fathi Habashi
Evidence Of The Existence Of Cathodic And Anodic Zones During The Leaching Of Minerals And Metals, Fathi Habashi
Fathi Habashi
It is accepted worldwide that the dissolution of minerals in some cases, is an electrochemical process where anodic and cathodic reactions take place. There are many parameters, such as agent concentration, that directly affect the dissolution process. The rate of leaching of minerals may differ depending on the oxygen concentration. In this paper, the existence of anodic and cathodic zones on themineral surface during the dissolution/leaching of minerals andmetals has been presentedwith some differentworks. It isworthmentioning that a good number of published papers have experimentally demonstrated the existence of anodic and cathodic areas on the mineral surface.
Energy, U.S. Department Of, Bert Chapman
Energy, U.S. Department Of, Bert Chapman
Libraries Faculty and Staff Scholarship and Research
Provides information about the U.S. Department of Energy (DOE) and its predecessor agencies and how DOE influences federal energy policy and scientific research in the western U.S.
Experimental Comparison Study Of The Response Of Polycarbonate And Laminated Glass Blast Resistant Glazing Systems To Blast Loading, Joshua Calnan
Experimental Comparison Study Of The Response Of Polycarbonate And Laminated Glass Blast Resistant Glazing Systems To Blast Loading, Joshua Calnan
Theses and Dissertations--Mining Engineering
This thesis recounts the experimental study of the dynamic response of polycarbonate blast resistant glazing systems to explosive loading through the use of triaxial load cells, pressure sensors, and a laser displacement gauge. This instrumentation captured the response of the glazing systems to blast loading over three phases of testing. The first phase of testing characterizes the load distribution around the perimeter and the second phase examines the repeatability of the results. The final phase of testing pushes the samples to failure. The results are then compared to HazL, a commonly used blast resistant glazing system analysis software tool. The …
Experiments To Measure The Effects Of Timber Harvesting Equipment On Surface Lithic Scatters, Douglas J. Baughman
Experiments To Measure The Effects Of Timber Harvesting Equipment On Surface Lithic Scatters, Douglas J. Baughman
All Master's Theses
The importance of cultural resource preservation cannot be overstated; however local economies are at least as important. Due to conservative archaeological site protection practices in Region 5 of the United States Forest Service, the economy of Northeastern California is being adversely affected. In an attempt to help the Forest Service make more informed management decisions and improve the Northeastern California economy, I undertook experiments on the effects of timber harvesting on lithic scatters on Modoc National Forest. The experiments involved placement of 225 glass tiles (proxy lithics) in each of three plots subject to vehicle traffic and log dragging by …
Development And Validation Of A Model For Granular Material Volume Measurements, Pourya Fasounaki
Development And Validation Of A Model For Granular Material Volume Measurements, Pourya Fasounaki
Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research
Keeping inventory record of packed grains in silos poses challenges since the bulk material’s different segments do not discharge uniformly, leading to formation of random peaks and valleys on the surface. To facilitate obtaining accurate volume measurement of the grains by taking into account this non-linear behavior on the surface, laser or plumb-bob level-sensing devices are employed at different part of the surface to probe the level of material under those regions.
The main goals of this research is to study the behavior of granular material in silo while discharging downward and by doing so, differentiate certain flow patterns formed …
Blasting. Part 2. Explosives On The Farm, G A. Greaves
Blasting. Part 2. Explosives On The Farm, G A. Greaves
Journal of the Department of Agriculture, Western Australia, Series 4
EXPLOSIVES will function with maximum reliability and efficiency only when they are carefully stored under cool, dry conditions so as to avoid deterioration.
When preparing charges the user should follow a correct procedure and use the proper tools. Always treat explosives with respect and remember they are made to explode. When they hit they hit hard.
Blasting. Part 1. Explosives And The Farmer, G A. Greaves
Blasting. Part 1. Explosives And The Farmer, G A. Greaves
Journal of the Department of Agriculture, Western Australia, Series 4
ABOUT 3,000 tons of commercial blasting explosives of various types are used every year in Western Australia of which approximately two thirds is utilised by mining industries and the remainder goes mainly to quarrying and public works.
The farmer and orchardist actually use only very small amounts but nevertheless explosives are a very useful working tool for the primary producer.