Engineering Education Commons^™

Exploring The Development Of Engineering Design Creativity And The Role Of Spatial Skills In This Process, Clodagh Reid, Sheryl Sorby

Research Papers

This study aims to investigate the development of creativity in engineering education and how spatial skills relate to creativity of design solutions.

Undergraduate students in the first (n=86) and fourth/fifth year (n=48) of their engineering programme were invited to participate. Students completed four spatial tests to precisely measure visualisation skills. In a separate session, students were invited back to solve two engineering design tasks: a ping pong problem where they designed a ping pong ball launcher game to meet specified criteria and a rain catcher problem where they were tasked with developing as many ideas for capturing rainwater as a …

Can Designing For Mars Stimulate Our Thinking About Designing More Sustainably For Earth?, Lucy Berthoud, James Norman, Ella Good, Nicola Kent

Practice Papers

This work describes the use of an arts-based project to stimulate creative thinking about design and sustainability for engineering students of all disciplines and years. ‘Building a Martian House’ was a public art project where a house designed for Mars was built in the centre of the city of Bristol, UK. It was conceived by artists, designed by the public, architects and engineers and built by construction companies. In this work, a workshop for students was developed and run based on this art project. Its aim was to use the challenge of designing for Mars as a provocation to thinking …

Fostering A Sustainable Future Through Inclusive Design, Samara Omar, Kate Youmans, Aubrey Wigner, Henry Archer, Carrie Mcclelland

Practice Papers

Fostering a sustainable future requires a balance between human necessities, societal institutions, and environmental systems; and this delicate equilibrium is best attained through strategic and innovative design. With this, and the growing diversity of our communities, it is imperative to equip engineering students with inclusive perspectives that allow them to critically assess the socio-technical elements of sustainable design. Recent research within engineering education has elevated the importance of empathy as a design practice and inclusivity as a design principle; exploring topics of bias and exclusion are essential to this work. As part of a first-year design course, we introduced these …

Drawing From Sefi Ethics Knowledge To Support Eco-Ethics Education Within The European University Of Technology, Jye Benjamin O'Sullivan, Shannon Chance

Practice Papers

We are leading a project called Ethico within the European University of Technology (EUt). Ethico aims to design and promote the uptake of innovative, ecological ethics for technological education.

This practice paper briefly summarizes the aims and structure of the Ethico project, and then focuses on the work completed as part of the teacher training module developed in Cluj, 7-9th March, 2023. This workshop drew its conceptual framework from the short abstracts currently available for the Engineering Ethics Education Handbook. The structure developed was then implemented in a student facing workshop in Troyes between the 10-14th July 2023. The handbook …

Critical Consciousness And Engineering Design Teaching Framework, Renata Alejandra Revelo Alonso, Joel Alejandro Mejia, Luis Montero Moguel, Alex Stutts

Practice Papers

Sustainability in engineering design is not just about the processes and practices established or the materials used and sourced, it is also about the mindset that engineers bring to design to carry forth solutions that promote a sustainable world. In this practice paper, we review a teaching framework for an engineering course on design with a contextual perspective. To contextualize engineering design, we incorporate critical consciousness topics to discuss alongside each design process topic. For example, during the unit when we discuss design alternatives in the engineering design process, we also discuss implicit bias and how implicit bias may impact …

Comparing The Meaning Of ‘Thesis’ And ‘Final Year Project’ In Architecture And Engineering Education, Rahman Tafahomi, Shannon Chance

Articles

Architectural education shares much in common with engineering, including the use of a culminating capstone experience in the final year. The form of this experience varies, with the research-based thesis and final-year project being most common. This paper explores the literature on traditions of enquiry and the meaning of research in various fields and the evolution of the ‘thesis’ and ‘final year project’ approaches over time. It then briefly summarises empirical research conducted on a case study institution struggling to bridge gaps in understandings of these distinct forms of learning and teaching. Throughout, the paper presents a comprehensive set of …

Centering Meaning-Filled Design Within Engineering Education: Recommendations On How To Integrate Interdisciplinary Architectural Design Charrettes, Community Engagement, Sustainability Principles, And Adapted Agile Methodologies Into A Student-Centered, Project-Based Engineering Program, David D Gillette, Michael Haungs, Thomas Fowler

Practice Papers

The Liberal Arts and Engineering Studies program (LAES) is a hybrid engineering and humanities degree housed in both the engineering and liberal arts colleges. LAES requires the same required math and science courses of standard engineering degrees, adding upper-level concentrations split equally between advanced engineering and humanities courses.

LAES was designed for retaining and recruiting a diversity of students in engineering, and to address recent innovations in industrial practice, technology design, and community-centered education. Through fifteen years of trial and error, the LAES program has developed a set of meaning-filled design guidelines for project work, combining engineering and humanistic problem …

Predicting Engineering Integration In K-12 From The Perspective Of Pre-Service Teachers, Pilar Pazos, Francisco Cima, Jennifer Kidd, Kristie Gutierrez, Dorothy Faulkner, Minjung Lee, Krishna Kaipa, Orlando Ayala

Engineering Management & Systems Engineering Faculty Publications

The integration of engineering content at the pre-college level is gaining global traction as a strategy to improve learning outcomes and to promote inclusion and diversity in STEM (Science, Technology, Engineering, and Mathematics). Preservice teacher (PST) programs have become natural insertion points for integration efforts by providing future K-12 teachers with the resources and preparation to teach engineering as part of their academic preparation. There is a need to understand the socio-cognitive mechanisms by which teacher preparation programs can help teachers to integrate engineering in their future classrooms. This work examines how an innovative cross-disciplinary program impacted important social-cognitive drivers …

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Scaffolding Middle And High School Students’ Engineering Design Experiences: Quality Problem-Scopeing Promoting Successful Solutions, Andrew Hughes, Cameron Denson

Educational Leadership & Technology Faculty Publications

Highly proficient expert engineers begin the iterative process of design by thoroughly investigating the design problem. Engineering students are often distracted by surface details, leading to a faulty conception of the problem and inappropriate solution strategies. Adequate problem-scoping is arguably the most important step in the design process. To address this issue, the researchers developed an instructional framework to help teachers scaffold students’ cognitive and metacognitive processes during the problem-scoping phase of a design challenge. The purpose of this quasi-experimental study was to investigate the impact that scaffolded instruction related to the SCOPE process had on students’ solution success during …

Examining Engineering Design Cognition With Respect To Student Experience And Performance, Greg J. Strimel, Eunhye Kim, Scott R. Bartholomew, Diana V. Cantu

Faculty Publications

This study investigated the design cognition and performance results of secondary and post-secondary engineering students while engaged in an engineering design task. Relationships between prototype performance and design cognition were highlighted to investigate potential links between cognitive processes and success on engineering design problems. Concurrent think-aloud protocols were collected from eight secondary and 12 post-secondary engineering students working individually to design, make, and evaluate a solution prototype to an engineering design task. The collected protocols were segmented and coded using a pre-established coding scheme. The results were then analyzed to compare the two participant groups and determine the relationships between …

Board # 113 : Eegrc Poster: Characterizing Trade-Off Decisions In Student Designers, Molly Goldstein

School of Engineering Education Graduate Student Series

Although design and decision-making are intertwined for practicing engineers, students from elementary school through college and graduate schools are not taught to think through uncertain situations (Howard, 2007) in which information is limited or outcomes are not guaranteed. Trade-offs are a complex element of decision, as the decision-making weighs possible outcomes against their respective costs (Otto &Antonsson, 1991). Although much is understood about how professional designers’ behaviors as compared to novice designers and students (Atmen et al., 2007; Crismond & Adams, 2012; Cross, 2003), there is little research regarding making trade-off decisions from middle school and high school to college. …

Designing The Technological World Through Biomimicry, Emily Yoshikawa, Greg J. Strimel, Scott R. Bartholomew

Faculty Publications

Scientific discoveries are a driver for advancing our technological world (ITEA/ITEEA; 2000/2002/2007). As more knowledge is acquired through scientific inquiry, people can better design and develop technological inventions and innovations (Knowles, Kelley, & Hurd, 2016). In turn, these novel technologies can aid in making new scientific discoveries, thus driving an ongoing cycle of technological advancement. However, in the process of designing and advancing our technological world, people can turn to the study of life and its phenomena to inspire and inform their designs. Nature is functional as well as beautiful. As we study the phenomena or functions of living organisms …

Engaging Children In Engineering Design Through The World Of Quadcopters, Greg J. Strimel, Scott R. Bartholomew, Eunhye Kim

Faculty Publications

The interest in engineering education for K-12 students has been rising (Carr, Bennett IV, & Strobel, 2012; Strimel, Grubbs, & Wells, 2016), and the importance of engineering education is discussed as early as the elementary school level (Hegedus, 2014). Petroski (2003) claims that children are ready to learn engineering because their play activities are similar to engineering and design activities, such as making, moving, and rearranging things. Studies have examined how elementary school students perceive engineering or engineers (Cunningham, Lachapelle, & Lindgren-Streicher 2005) and found that elementary-aged students associated engineering with repairing, installing, driving, constructing, and improving machines and devices. …

Reconceptualizing Pedagogical And Curricular Knowledge Development Through Making, Steven Greenstein, Justin Olmanson

Department of Teaching, Learning, and Teacher Education: Faculty Publications

While making is typically tethered to narratives of entrepreneurship and business, it can provide a gateway to meaningful interaction and deepened understanding of both content and pedagogy. In this article we provide descriptions of two courses—one each at the pre-service and in-service levels—that engage teachers in making and design practices that we hypothesized would inform their pedagogical and curricular thinking. With a focus on the design of new tools to support teaching and learning through the use of human-centered design practices and digital fabrication technologies, these courses have teachers exploring at the intersection of content, pedagogy, and making. Specifically, they …

Integrating Technology And Engineering In A Stem Context, Barry N. Burke, Philip A. Reed, John G. Wells, Robert E. Yager (Ed.), Herbert Brunkhorst (Ed.)

STEMPS Faculty Publications

(First paragraph) Imagine students entering the classroom with an enthusiasm that cannot be contained. They come from all walks of life and with different experiences and backgrounds and are eager to engage in learning. Inspiration and innovation are on their mind. What they learned in their science and math classes is now being applied in another class they take called Technology and Engineering. Opportunity is what they see for their future. Something about connecting all the dots from all their classes propels them to change their outlook, to get involved, to get excited about school and to envision their future.

A Third-Year Review Of Design And Packaging Of Sensor Systems, M. Brian Thomas, Andrea Mitofsky, Vukica Jovanovic, John Eiler

Engineering Technology Faculty Publications

Faculty from the Electrical Engineering and Design Engineering Technology Departments at Trine University have developed a joint design module for upper-level courses in their respective disciplines. In this module, student teams collaborate in designing and prototyping the electronics and packaging for a hand-held sensor system. The principal objective of the collaboration is for students to incorporate design factors external to their discipline in a program-focused design project. This effort advances the students' abilities to work effectively in multidisciplinary teams during their senior capstone courses. The design module was introduced in the fall 2011 semester, and was repeated in fall 2012 …

Simulating Real-World Work Experience In Engineering Capstone Courses, Thomas H. Deagostino, Vukica M. Jovanovic, M. Brian Thomas

Engineering Technology Faculty Publications

Experiential learning and cooperative education provide students with the necessary tools to succeed in the workplace by simulating their future working environment. Various studies have shown that many graduates have gaps related to their so called "soft skills", which are related to teamwork, time management, working under pressure and tight deadlines. The main purpose of the inclusion of the industry expert in senior design discussions is to provide meaningful feedback through a competitive led by industry practitioners. In this simulation, the senior engineering students take on the role of actual engineering job functions, on a demanding, continuous basis for the …

Assessing Student Design Work In Social Entrepreneurship Projects, Lindsey Anne Nelson

School of Engineering Education Graduate Student Series

Helping People Living in Poverty? Understanding Factors Motivating Social Entrepreneurship Abstract Increasingly, engineering educators look to increase the social relevance of engineering design activities. The emergence of social businesses has sparked interest in creating programs that teach engineers about social entrepreneurship. Social businesses are viable business ventures where businesses adopt a social mission. Some strategists view social businesses as ways to capture market share in countries that have a large emerging consumer class, such as India and Brazil. These strategists speak of finding “the fortune at the Bottom of the Pyramid” and target consumers earning less than 4USD/day. Other strategists …

Engineering Design Challenges In A Science Curriculum, Arthur Eisenkraft

Publications

Create a light and sound show to entertain your friends. Design an improved safety device for a car. Develop a 2-3 minute voice-over for a sports clip explaining the physics involved in the sport. Modify the design of a roller coaster to meet the needs of a specific group of riders. Design an appliance package for a family limited by the power and energy of wind generator. Develop a museum exhibit to acquaint visitors with the atom and nucleus and create a product that can be sold at the museum store after visitors leave your exhibit. All of these challenges …

Integrating Engineering Design Challenges Into Secondary Stem Education, Ronald L. Carr

Publications

Engineering is being currently taught in the full spectrum of the P-12 system, with an emphasis on design-oriented teaching (Brophy, Klein, Portsmore, & Rogers, 2008). Due to only a small amount of research on the learning of engineering design in elementary and middle school settings, the community of practice lacks the necessary knowledge of the trajectory of students' learning progressions towards design mastery and expertise and the appropriateness of otherwise established design pedagogies. The issue is even more pressing since many states are embedding engineering into their standards without a clear notion of how engineering (often conceptualized as design) works …

Engineering Professional Development Design For Secondary School Teachers: A Multiple Case Study, Jenny L. Daugherty

Publications

The effectiveness of teachers has been regarded as crucial to the success of standards-based reform (Fishman, Marx, Best, & Tal, 2003). Research, particularly within science and mathematics, has underscored the need for professional development to help teachers understand (a) subject matter, (b) learners and learning, and (c) teaching methods (Loucks-Horsley, 1999). In addition to focusing on teacher professional development, national reform efforts have also emphasized science, technology, engineering, and mathematics (STEM) education (i.e., Rising Above the Gathering Storm, NRC, 2006). While substantial work has been conducted in mathematics and science, the efforts in technology and engineering education are much less …

Motivation While Designing In Engineering And Technology Education Impacted By Academic Preparation, Nathan Mentzer, Kurt Becker

Publications

The purpose of this study was to determine if high school students’ academic preparation was correlated with change in motivation during an engineering design challenge. The research was conducted in a high school classroom in which elements of engineering design were taught in a technology education context to eleventh-grade student from diverse academic backgrounds (measured by grade point average [GPA]). Participant motivation was assessed by the California Measure of Mental Motivation (CM3). The CM3 measures student motivation to apply critical thinking skills and reasoning to solve problems in five subscales: mental focus, learning orientation, creative problem solving, cognitive integrity, and …

Join The Mission, Design A Patch, Nathan Mentzer, Fay Mentzer, Krista Jones

Publications

The article presents a classroom activity designed for third grade and up that requires students to design their own mission patch. The activity references the patches developed and designed by the U.S. National Aeronautics & Space Administration. Moreover, the article discusses the design of the activity, the available resources, the evaluation process and interdisciplinary connections.

Design Activity: Students Designing Their Own Video Games, Steve Shumway

Publications

The article presents a school activity helping students to design their own computer video games. In the past, advanced programming using Java or C++ was used to design video games. At present, there are many free, easy-to-use software programs available to help elementary-age children create their own video games. The article suggests that teachers download a free version of this software and begin the tutorial.

Creativity: A Framework For The Design/Problem Solving Discourse In Technology Education, Theodore Lewis

Publications

Subjects for which aesthetics and creative performance are critical curricular dimensions (such as art, physical education, music, and technology education), and which are accommodative of students across the range of intelligences (Gardner, 1999) are not readily or completely captured by content standards. Therefore content knowledge in these fields that target student achievement as conventionally conceived must be complemented by treatment of more subjective and elusive goals such as the development of connoisseurship, appreciation, or creative insight. With the publication of standards for the subject (International Technology Education Association, 2000), the need for focus upon creativity in technology education has been …

Design Optimization Module For Hierarchical Research And Learning Environment, Oktay Baysal, Mehti Koklu, Ahmed K. Noor

Mechanical & Aerospace Engineering Faculty Publications

The present paper describes a learning module on design optimization courses within a hierarchical research and learning network (HRLN). In this environment a knowledge organization can be created as a hierarchical learning network to link diverse inter- and trans- disciplinary teams from a consortium of universities, industry, government agencies and the providers of learning technologies. It is an approach that builds on computer-based training, intelligent tutoring systems, interactive learning, collaborative-distributed learning, and learning networks. The present design optimization module has been developed and described herein, as a demonstrator of a learning module in this environment. This module allows for the …

Prototype Development For A Leak-Preventive Toilet Flush System- An Met Senior Design (Capstone) Project, Cheng Y. Lin

Engineering Technology Faculty Publications

A senior design (Capstone) project for three mechanical engineering technology students at Old Dominion University is described. A prototype design is presented to perform the functional test of a leak-preventive toilet system. There are two major leaks in the toilet water tank. In the first case, leaking occurs when the seal in the water tank becomes aged. The leak is very easy to detect visually, since the outside of the tank and the floor becomes wet. In the second case, leak occurs when the flapper valve can't complete shut off the water, due to corrosion or damage of the rubber …