Engineering Education Commons^™

Engineering Technology Programs And Technical Standards: Investigating Library Access And Course Integration, Margaret Phillips, Paul B Mcpherson, Danielle Leclerc

Libraries Faculty and Staff Scholarship and Research

Due to ABET accreditation requirements and industry expectations, integrating technical standards into Engineering Technology (ET) curricula is crucial for student success. However, previous studies have shown that faculty report access and knowledge challenges in working to integrate standards into ET course content. Additionally, academic librarians have long acknowledged there are many issues with providing access to standards to campus users, such as high costs and extensive digital rights management (DRM) restrictions. The purpose of this study is to conduct an environmental scan of library websites at institutions with ET programs to investigate library-provided access to standards and to survey ET …

The Development Of Techie Times, Brian D. Tedeschi, Julia K. Miller, Anne M. Lucietto, Nancy L. Denton

School of Engineering Education Faculty Publications

Summer 2020 provided the motivation and opportunity to move summer outreach programs into the virtual world. Faculty and students in the Purdue University School of Engineering Technology moved face-to-face programs into a middle school program called Techie Times. This program was designed to provide students with an organized platform occurring just before the school year started, allowing them to learn at home, working with family, or independently. The program was designed to take place nonconsecutively over eight days, covering five various STEM topics. Some of these activities were already a part of the middle school curriculum; others were not. That …

Minority Graduates In Engineering Technology: Trends In Choice Of Major, Yury Alexandrovich Kuleshov, Emily Rada, Anne M. Lucietto

School of Engineering Education Faculty Publications

The paper presents a demographic analysis of college graduates in engineering technology (ET). The paper intends to investigate the graduates’ background, population, and choice of major. Graduates in ET are a much smaller population than those found in other Science, Technology, Engineering, and Mathematics (STEM) programs. Little publishing exists about who they are and how long it took to pursue their degree while examining other available demographic data. The delineation of this paper does not include computer science and computer technology programs. Several opinions exist about who these students are, where they come from, and what interests them. The paper …

Improving Writing Quality Of Capstone Reports, Fred Berry, Margaret Phillips, James Condron, Phillip Sanger

Libraries Faculty and Staff Scholarship and Research

Abstract-Contributions: The main contribution is to share a series of practical methods that improve the writing quality of capstone reports. Background: The ability to write well is critical to the success of an engineering technology graduate. However, the evidence points to the fact that industries are disappointed with the quality of writing skills graduates demonstrate. Intended Outcomes: A faculty review of capstone reports showed little improvement in writing quality from the first course to the second in a two-semester capstone sequence. Therefore, the instructors explored what actions were needed to improve the writing quality of the capstone reports. Application Design: …

How Engineering Technology Students Perceive Mathematics, Meher R. Taleyarkhan, Anne M. Lucietto, Therese M. Azevedo

School of Engineering Education Faculty Publications

Engineering Technology (ET) is often combined with that of Engineering. Although Engineering Technology is based on a more hands-on approach and Engineering a theoretical approach, the two majors share a very similar pedagogy in teaching students the same engineering and scientific principles. An observation by an ET professor found that ET students more often than not would eschew the use of mathematical computations and instead provide answers they believe to be correct, without computation or explanation. Leading researchers to delve into possible reasons as to why ET students are reluctant to utilize mathematics. This study utilized in-person interviews with 15 …

Engineering Technology Programs Outreach To K-12, Alok Verma

Engineering Technology Faculty Publications

The Engineering Technology (ET) degree emphasizes hands-on application and implementation. Graduates holding this degree play a valuable role in economically growing the US and keeping it internationally competitive. However, “engineering and engineering technology, are widely misunderstood… the public sector (employers, students, high-school counselors, politicians and the general public) needs to be educated as to the particular value of each,” according to Engineering.com [1]. The National Academy of Engineering states, “Unlike the much better-known field of engineering, engineering technology is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. This is even though workers …

Pedagogical Methods And Advances For Synchronous/Asynchronous Instruction Of Laboratories In Engineering Technology Programs, Nestor Escobales, Alok Verma

Engineering Technology Faculty Publications

Significant research has been done on the subject of distance learning (DL) instruction for many academic disciplines. However, when it comes to engineering technology (ET) programs, particularly, engineering laboratory work, limited studies are available. It is unquestionable that engineering laboratory work is essential for the successful preparation of individuals enrolled in ET programs. The focus of ET programs is on the correct use and application of engineering principles with a direct focus on practical application rather than on theory alone. The difficulties increase significantly when laboratories are offered in DL mode, particularly for ET programs. It is well known that …

Engineering Technology Graduates: A Survey Of Demographics And Mentoring, Anne M. Lucietto, Elizabeth Dell, Elaine M. Cooney, Lisa Ann Russel, Emily Schott

School of Engineering Education Faculty Publications

Early in 2017, a team of engineering technology practitioners along with others interested in the state of engineering technology published a report entitled “Engineering Technology Education in the United States.” This report garnered a list of recommendations and things that needed to be investigated to further our understanding of this student population; specifically focusing on the students and how they relate to other students studying both similar and different material. A team of like-minded engineering technology education researchers have been working together to ascertain the answers to the findings. They prepared two surveys, obtained institutional approval, and distributed it throughout …

Engineering Technology Undergraduate Students: A Survey Of Demographics And Mentoring, Anne M. Lucietto, Elizabeth Dell, Elaine M. Cooney, Lisa Ann Russell, Emily Schott

School of Engineering Education Faculty Publications

A report published by a group of engineering technology practitioners and others interested in engineering technology called “Engineering Technology Education in the United States” was released in early 2017. The report provided recommendations of areas for further study related to engineering technology students to increase our understanding of the population. These specifically suggested focusing on the students in comparison to other students in similar and different fields of study. Following these recommendations, a team of engineering technology education researchers has been collaborating to gather information in these areas. The team obtained institutional approval and distributed two surveys throughout the United …

Successful Factors For Native And Community College Transfer Students In Engineering Technology At A Four-Year University, Leendert Craig

Electronic Theses and Dissertations

Students who attend community colleges often transfer to 4-year universities seeking to earn a degree typically not offered at the community college level. Tennessee has 2 programs: the Tennessee Promise and the Tennessee Reconnect programs that offer students tuition-free access to the state’s community college system. Previous studies have been conducted to compare transfer students’ performances to that of native students and typically compared the students in all disciplines. This study seeks to compare transfer students (students who enter the participating university with 40 or more credit hours) to native students (students who initially enrolled or transferred into the 4-year …

Effectiveness Of Drafting Models For Engineering Technology Students And Impacts On Spatial Visualization Ability: An Analysis And Consideration Of Critical Variables, Petros J. Katsioloudis, Jill E. Stefaniak

STEMPS Faculty Publications

Results from a number of studies indicate that the use of drafting models can positively influence the spatial visualization ability for engineering technology students. However, additional variables such as light, temperature, motion and color can play an important role but research provides inconsistent results. Considering this, a set of 5 quasi-experimental studies, was conducted to identify additional critical variables. According to the results, a dynamic, 3Dprinted drafting model, presented with a blue background under lighting conditions between 500–750 lux had the highest impact on spatial visualization ability of engineering technology students.

Effects Of Light Intensity On Spatial Visualization Ability, Petros J. Katsioloudis ., Mildred Jones

STEMPS Faculty Publications

A plethora of technological advances have happened since artificial illumination was developed by Thomas Edison. Like technology has had an effect in many areas in the modern civilization it also made a difference in the classroom. Nowadays, students can have instruction in classrooms with no external windows, even during gloomy winter or rainy days, and virtually during any hour of the day. Several lightning devices are being used, ranging from energy efficient LEDs to fluorescent lighting. Some forms of lighting methods have been found to be inappropriate for prolonged exposure to the human eye such as various gas-discharge lamps that …

Use Of Dynamic Visualizations For Engineering Technology, Industrial Technology, And Science Education Students: Implications On Ability To Correctly Create A Sectional View Sketch, Petros J. Katsioloudis, Daniel Dickerson, Vukica Jovanovic, Mildred V. Jones

Engineering Technology Faculty Publications

Spatial abilities, specifically visualization, play a significant role in the achievement in a wide array of professions including, but not limited to, engineering, technical, mathematical, and scientific professions. However, there is little correlation between the advantages of spatial ability as measured through the creation of a sectional-view sketch between engineering technology, industrial technology, and science education students. A causal-comparative study was selected as a means to perform the comparative analysis of spatial visualization ability. This study was done to determine the existence of statistically significant difference between engineering technology, industrial technology, and science education students’ ability to correctly create a …

A Comparative Analysis Of Preferred Learning And Teaching Styles For Engineering, Industrial, And Technology Education Students And Faculty, Petros Katsioloudis, Todd D. Fantz

STEMPS Faculty Publications

No abstract provided.

Enhancing Student Learning In Engineering Technology Programs? A Case For Physical Simulations, Alok Verma

Engineering Technology Faculty Publications

Physical simulations have a proven record as a teaching tool. Concepts that are often hard to grasp are made easy by the use of physical simulation activities. The constructivism learning theory suggests that people learn better by actively participating in the process of learning. According to the Encyclopedia of Educational Technology, "Simulation-based learning involves the placement of a student into a realistic scenario or situation. The student is then responsible for any changes that occur as a result of their decisions." A number of physical simulation based tools have been developed by the author for use as instructional tools to …

Promoting Faculty Development With Asee/Nasa Fellowship Programs- Parametric Study Of Laser Beam Cutting (Lbc) Processes- A Case Study, Alok K. Verma, Gary R. Crossman, Carl J. Voglewede, Thomas J. Burns

Engineering Technology Faculty Publications

American Society for Engineering Education (ASEE) and National Aeronautics and Space Administration (NASA) offer a joint program for faculty and research development. This program known as ASEE/NASA Faculty Fellowship program offers opportunities for professional development for Engineering Technology faculty. This paper discusses one such experience involving applied research at NASA Langley Research Center, which resulted in professional development of the faculty member while enhancing the undergraduate curriculum in Engineering Technology.

Project-Based Freshmen Engineering Courses In Civil Engineering Technology, Vernon W. Lewis Jr., Carol L. Considine

Engineering Technology Faculty Publications

Old Dominion University (ODU) has developed two fundamental courses for freshmen engineering students. The first course introduces the fundamentals of the practice of engineering including innovation, creativity, design and manufacturing, commercialization, teaming skills, environmental impact, and ethics. The second course is an exploration of engineering and engineering technology disciplines with an emphasis on projects. The purpose of these courses is to engage the students in the application of engineering early in their course of study with the hope that their interest will be reinforced and the likelihood of their being retained as students will increase. The courses are divided into …

A Matlab-Based Upper Division Systems Analysis Course For Engineering Technology, William D. Stanley, Paul L. Kauffmann, Gary R. Crossman

Engineering Technology Faculty Publications

The Department of Engineering Technology at Old Dominion University offers TAC of ABET accredited baccalaureate programs in Civil Engineering Technology, Electrical Engineering Technology, and Mechanical Engineering Technology. All students are required to take traditional courses in algebra and trigonometry, as well as differential and integral calculus, at the freshman and sophomore levels. While these courses provided the necessary basic mathematical skills, it was difficult to justify the traditional upper-division mathematics courses such as differential equations, vector analysis, etc., as appropriate for the special needs of engineering technology students.

To address this issue, the Department has undertaken the development of a …

Long-Term Performance Of Old Dominion Technology Graduates, William D. Stanley, Alok K. Verma

Engineering Technology Faculty Publications

The long-term career patterns of Old Dominion University's engineering technology baccalaureate graduates have been studied extensively. Results from approximately 400 alumni have been analyzed. The results of the analysis are presented and conclusions are drawn from the trends. The results indicate that the career progress of engineering technology graduates over a nearly twenty-year period is substantial and that they are performing effectively in a variety of career patterns.