Engineering Education Commons^™

Should Teaching Guides Be Used As Indicators Of Gender Dimension In A University Degree?, Elisabet Mas De Les Valls, Marta Peña, Noelia Olmedo-Torre, Amaia Lusa

Research Papers

In order to achieve a truly equality society, universities are making significant efforts towards gender mainstreaming. One of the main pillars of this approach is the implementation of a gender dimension in teaching. To assess the degree of progress towards this goal, suitable indicators, both qualitative and quantitative, are desirable. Surveys could be used to gather students’ perceptions or educators’ efforts as indicators, but an underutilised source of information is available in the teaching guides. Teaching guides are understood as those open-access documents where the public can find a subject’s description, goals, and contents, among other universityspecific features.The aim of …

Integrative Experiences Through Modeling And Simulation Of Mechatronic Systems, Mileta Tomovic, Cynthia Tomovic, Vukica M. Jovanovic, Cheng Y. Lin, Nan Yao, Petros J. Katsioloudis

Engineering Technology Faculty Publications

Learning is integrative lifelong process which requires continuous refreshing of old material and learning new material. This principle holds also for student experiences during their undergraduate studies. Students learn new material throughout their studies, and they may or may not have opportunity to use the material in different context and at different levels. As a result some of the acquired knowledge may be forgotten by the time student graduates or it may not be placed in the context of the overall program outcomes, thus material presented may not seem to have relevance to student's career. An effective method to address …

Learning Module On Electric Motors Modeling, Control, And Testing (Lm-Emmct), Ana Djuric, Vukica M. Jovanovic, Ece Yaprak, Wen Chen

Engineering Technology Faculty Publications

The objective of this paper is to develop and integrate a learning module on Electric Motors Modeling, Control and Testing (EMMCT) into the Electrical Engineering Technology (EET) and Mechanical Engineering Technology (MET) programs. Preparing future engineers to work in highly automated production requires proper education and training in mechatronics theory and applications. Although Engineering Technology programs at various universities offer various courses related to the controls, electrical motors, and automation, they are not including the same methods when it comes to the selection of appropriate electrical motor for a specific application in mechatronic system. MET student do have exposure to …

Hands-On Learning Environment And Educational Curriculum On Collaborative Robotics, Ana Djuric, Jeremy L. Rickli, Vukica M. Jovanovic, Daniel Foster

Engineering Technology Faculty Publications

The objective of this paper is to describe teaching modules developed at Wayne State University integrate collaborative robots into existing industrial automation curricula. This is in alignment with Oakland Community College and WSU’s desire to create the first industry-relevant learning program for the use of emerging collaborative robotics technology in advanced manufacturing systems. The various learning program components will prepare a career-ready workforce, train industry professionals, and educate academicians on new technologies. Preparing future engineers to work in highly automated production, requires proper education and training in CoBot theory and applications. Engineering and Engineering Technology at Wayne State University offer …

Developing A Faculty Learning Community To Support Writing Across Different Stem Disciplines, Vukica M. Jovanovic, Denise Tombolato-Terzic, Daniel P. Richards, Pilar Pazos, Megan Mckittrick, Julia Romberger, Otilia Popescu

Engineering Technology Faculty Publications

Writing to learn is one of the very important pedagogical strategies in a variety of disciplines. This concept is not specifically addressed in the majority of engineering courses. Hence, university initiatives such as the Quality Enhancement Plan (QEP), emerging out of accreditation and institutional assessments, are focusing on infusing scholarship from other disciplines (in this case English) for the purpose of student learning improvement. Engineering and Science programs do include various courses in English Composition as the part of the curriculum; however, writing is not embedded in all discipline-specific courses at the upper-division level. The program outlined here focuses on …

Using Computer-Aided Design Software And 3d Printers To Improve Spatial Visualization, Petros Katsioloudis, Millie Jones

STEMPS Faculty Publications

Many articles have been published on the use of 3D printing technology. From prefabricated homes and outdoor structures to human organs, 3D printing technology has found a niche in many fields, but especially education. The education of technology and engineering students has come a long way from traditional instruction using hand drawings. Although drawings may still be a part of a students learning, computer technology has been embraced in this field for several years. With the introduction of AutoCAD technical drawing programs and now 3D printing, learners can use 3D printed models to develop their spatial abilities in technology and …

Dissemination Of Microprocessor Courses Through Classroom And Interactive Cyber-Enabled Technologies, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Thomas B. Stout, Richard L. Jones

Engineering Technology Faculty Publications

The project is in the middle stages of the implementation. There seems to be a positive attitude of learning and using of the training system and curriculum package by all project staffs. Microchip, Inc. and microEngineering Labs, Inc. have donated supplies to support the hardware and software development for this project. The next objectives are team training, recruitment of interested trainees/teachers to participate in training for summers 2014, and assess the effectiveness of the implementations with teachers and students. Photo 2 is the project logo that describes all the concepts of this project.

A Third-Year Review Of Design And Packaging Of Sensor Systems, M. Brian Thomas, Andrea Mitofsky, Vukica Jovanovic, John Eiler

Engineering Technology Faculty Publications

Faculty from the Electrical Engineering and Design Engineering Technology Departments at Trine University have developed a joint design module for upper-level courses in their respective disciplines. In this module, student teams collaborate in designing and prototyping the electronics and packaging for a hand-held sensor system. The principal objective of the collaboration is for students to incorporate design factors external to their discipline in a program-focused design project. This effort advances the students' abilities to work effectively in multidisciplinary teams during their senior capstone courses. The design module was introduced in the fall 2011 semester, and was repeated in fall 2012 …

Delivery Of Hands-On Technical Courses Through Real-Time Distance Learning, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Feng Jao

Engineering Technology Faculty Publications

It is generally believed that it is too challenging to deliver technical laboratory courses using distance learning technologies. The focus of this research was to develop strategies that may be used to address these challenges. A research team composed of faculty from several universities and community colleges explored what might be needed to make these types of technical laboratory course instruction possible using distance learning technologies. The team explored delivering a microcontroller embedded systems design course through audio-visual distance learning technologies. The team's research and development activities are discussed. These include focuses on the technical training equipment that had to …

Simulating Real-World Work Experience In Engineering Capstone Courses, Thomas H. Deagostino, Vukica M. Jovanovic, M. Brian Thomas

Engineering Technology Faculty Publications

Experiential learning and cooperative education provide students with the necessary tools to succeed in the workplace by simulating their future working environment. Various studies have shown that many graduates have gaps related to their so called "soft skills", which are related to teamwork, time management, working under pressure and tight deadlines. The main purpose of the inclusion of the industry expert in senior design discussions is to provide meaningful feedback through a competitive led by industry practitioners. In this simulation, the senior engineering students take on the role of actual engineering job functions, on a demanding, continuous basis for the …

Strategies For Effective Online Course Development, Carol L. Considine, Michael W. Seek, Jon Lester

Engineering Technology Faculty Publications

Old Dominion University's Civil Engineering Technology (CET) program has a successful history of distance education, with more than half of the student population comprised of distance learners. Distance learning delivery has traditionally been via satellite and videostreaming with students having the choice of asynchronous or synchronous options. The university is in the process of updating their distance learning technologies and has encouraged programs to migrate to an online modality of distance learning. Developing and delivering online courses requires different competencies and facilitation skills than video streamed synchronous delivery or face to face instruction. A course delivered online changes the teaching …

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …

Educating The Professional Engineer Of 2020: The Changing Licensure Requirements, Susan L. Murray, Terri M. Lynch-Caris

Engineering Management and Systems Engineering Faculty Research & Creative Works

Engineering education programs would be well served to align their curricula and program outcomes to the Fundamentals of Engineering (FE) Exam and Professional Engineer (PE) Exam specifications. These exams are required steps in the process of becoming a licensed engineer in most states. NCEES (the National Council of Examiners for Engineering and Surveying) is a national nonprofit organization dedicated to advancing professional licensure for engineers and surveyors. It develops, administers, and scores these examinations used for engineering licensure. Starting in 2011, NCEES held survey-creation meetings with diverse teams to develop a draft survey containing the subjects in each discipline and …

An Inverted Teaching Model For A Mechanics Of Materials Course, Jeffery S. Thomas, Timothy A. Philpot

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Instructors at Missouri University of Science and Technology have been offering certain sections of a mechanics of materials course in an inverted format for the past two years. In this format, students learn the concepts outside of class, using a textbook, animations and videos developed by the authors, and work on homework either individually or in groups during the optional class time. Students take eight multiple-choice exams and a final exam that is common to both the inverted sections and the more traditional lecture-based sections. Homework in the inverted sections is assigned but not graded. The in-class exams are given …

Missouri S&T Engineering Management Capstone Senior Design: Lessons Learned And Challenges To Come, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

A more traditional, capstone senior design course was recently added as a requirement for Engineering Management undergraduates in the Engineering Management & Systems Engineering Department at Missouri S&T. The case studies course that had served that purpose was deemed to be insufficient for ABET accreditation purposes by department faculty. The most recent 2008 accreditation visit for the department verified this belief and caused the department to launch the new class earlier than anticipated to prove the class would be taught and that it would meet required standards. Thus, no weaknesses or concerns were noted in this area in the final …

Simulation And Visualization Enhanced Engineering Education- Development And Implementation Of Virtual Experiments In A Laboratory Course, Sushil K. Chaturvedi, Kaustubh A. Dharwadkar

Mechanical & Aerospace Engineering Faculty Publications

This paper presents results from a National Science Foundation grant titled "Simulation and Visualization Enhanced Engineering Education", funded by the EEC division. Although the scope of the project is quite broad, embracing a wide range of courses in three engineering disciplines, the present work describes the results obtained from application of simulation and visualization for development and implementation of web-based virtual engineering laboratories. The present work leverages the advancement in hardware and software technologies to map physical experiments into web-based virtual experiments that can be used to enrich student's laboratory experience. Four physical experiments in the thermo-fluids laboratory course have …

Impact Of Project Based Learning In Introduction To Engineering/Technology Class, Alok K. Verma

Engineering Technology Faculty Publications

Project based learning (PBL) has a proven record as a teaching tool. Concepts that are often hard to grasp are made easy by the use of project based activities. The constructivism learning theory suggests that people learn better by actively participating in the process of learning. The Introduction to Engineering and Engineering Technology class has been modified to include project based learning kits to engage freshmen early on in the program. The goal is to demonstrate students the link between the scientific principles and their engineering applications. The course is team taught by faculty from various engineering and technology disciplines …

Using Abet Assessment Requirements As A Catalyst For Change: Enhancing And Streamlining The Engineering Management Undergraduate Program At Missouri S&T, Stephen A. Raper, Susan L. Murray, Christa Moll Weisbrook, William Daughton

Engineering Management and Systems Engineering Faculty Research & Creative Works

The Engineering Management (EM) undergraduate degree program at Missouri University of Science & Technology (formerly University of Missouri-Rolla) was the first program of its kind. The program started over 40 years ago and it is one of only five ABET accredited undergraduate EM programs [1]. The initial degree program included a senior year of management courses in conjunction with three years of courses in common engineering disciplines such as mechanical, electrical, and civil engineering. In the 1990s the program underwent a major restructure and students combined core engineering management classes with an emphasis area inside the department. Industrial, manufacturing, packaging, …

Introducing Hands-On Simulation Activities In Introduction To Engineering & Engineering Technology Class To Keep Students Engaged, Alok Verma

Engineering Technology Faculty Publications

Low enrollment and high attrition rates have often plagued Engineering and Engineering Technology programs. Part of this problem can be attributed to the lack of engaging hands-on activities during the first year of instruction. Most engineering and technology programs require students to take natural science, math and some general education courses during the first two years with minimal technical content. To maintain student's interest in the technical career path, it is important that students establish a link between the theoretical knowledge and its application to solve real life problems early in their learning experience. Simulation based activities have a proven …

Encouraging Lifelong Learning For Engineering Management Undergraduates, Susan L. Murray, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

The current ABET guidelines place an emphasis on life-long learning for our undergraduate students. What is life-long learning? How can we encourage students to consider global issues, current events, or even anything "that isn't going to be on the next test"? In this paper we present survey results evaluating habits of undergraduate students entering an engineering management program and seniors related to life-long learning including attending professional society meetings, reading trade publications, reading business related books, and other learning outside of the classroom activities. This paper also presents a two semester effort to increase life-long learning activities among undergraduate engineering …

Privatization Initiatives: A Source For Engineering Economy Case Studies, Paul Kauffmann, Tarek Abdel-Salam, Keith Williamson, Carol L. Considine

Engineering Technology Faculty Publications

A case study method which reviews the basic structure of the circular A-76 privatization decision model is discussed. It highlights the possibilities for development of case studies that can challenge student teams to apply engineering economy tools while developing skills in a range of circular areas that are important to undergraduate engineering education and career success in engineering practice. Beyond building quantitative and qualitative business analysis skills, engineering economy cases can enhance student skills in other topical areas such as technical presentations, and report writing. The privatization initiatives and related decision models can also enhance human relations oriented skills in …

Implementing Simple Protocols In Multiple Processors Control Applications, Steve Hsiung, Tyson Mccall, Corinne Ransberger

Engineering Technology Faculty Publications

Using microprocessor/microcontroller in various control applications is not only one of the major topics in Engineering Technology curricula, but also of interest in industry applications. To accomplish it correctly the process of designing application programs starts from the individual module development through extensive testing, verification, and modification. Applying these developed modules in a useful manner requires the links and integrations that lead to the practical project implementation. Frequently, in students' senior project designs and faculty's research plans, the microprocessor/microcontroller resources become scarce or cause conflicts during the modules' integration stage. To accommodate the shortfall of the resources and resolve any …

Lessons Learned And Best Practices For Using An Analytic Strategy Approach For The Creation Of Virtual Laboratories For Distance Learning In Engineering Technology, Anthony W. Dean, Carol L. Considine, Gary R. Crossman

Engineering Technology Faculty Publications

This paper describes the use of an Analytic Strategy Approach used in the development of a Virtual Automation and Controls Lab in the Mechanical Engineering Technology Program of the Engineering Technology Department at Old Dominion University. This paper looks at the three phases, as applied to the development of a virtual lab using an analytic strategy design:

(1) Formulation of the quantitative and qualitative approach to assist in decision process,

(2) Quantitative and qualitative analysis of the decision alternatives - within the decision context,

(3) Interpretation of the analysis results and implications for decision.

Design, Development, And Delivery Of Certificate Programs For Funding Opportunities And Industry Collaboration, Carol Considine, Paul Kauffmann

Engineering Technology Faculty Publications

Many engineering technology departments have four general areas that are used for evaluation of tenure and promotion. These areas include teaching, research and scholarly activities, service, and other professional activities. Although teaching is the primary mission in most engineering technology programs, external funding as part of the research area is playing a larger role in tenure decisions at many universities. Many faculty members in engineering technology programs come from an industrial background and do not have a specific research area of interest and contacts within the research community. These faculty members must look at other avenues to develop the external …

An Integration Of Pc Hardware & Software In Teaching Engineering Technology Courses, Steve Hsiung, Richard Jones

Engineering Technology Faculty Publications

As technology advances, the price of a PC drops dramatically. This trend has resulted in PCs that are complex, powerful, and very affordable. Today's PC is a popular and essential tool in teaching software programming course(s) in C, C++, Visual Basic, or Java, running commercial software supporting courses in circuit simulation/design or circuit board layout, and acting as a workstation to gain access to the Internet or LAN networks. In most Engineering Technology curricula there is a limited amount of linkage between those PC applications. The actual effort to merge the hard-gained knowledge of hardware & software concepts together through …

Project-Based Freshmen Engineering Courses In Civil Engineering Technology, Vernon W. Lewis Jr., Carol L. Considine

Engineering Technology Faculty Publications

Old Dominion University (ODU) has developed two fundamental courses for freshmen engineering students. The first course introduces the fundamentals of the practice of engineering including innovation, creativity, design and manufacturing, commercialization, teaming skills, environmental impact, and ethics. The second course is an exploration of engineering and engineering technology disciplines with an emphasis on projects. The purpose of these courses is to engage the students in the application of engineering early in their course of study with the hope that their interest will be reinforced and the likelihood of their being retained as students will increase. The courses are divided into …

Performing Interactively A Thermo-Fluids Laboratory Experiment In The Virtual Domain, Sushil K. Chaturvedi, Ali O. Akan, Tarek M. Abdel-Salam, A. Priyadershini

Mechanical & Aerospace Engineering Faculty Publications

This paper deals with the development of an experiment in the virtual domain for the undergraduate thermo-fluids laboratory in the mechanical engineering program. A physical experiment titled "Venturimeter as a Flow Measuring Device" is replicated as a computer-based experiment as part of the ongoing effort at Old Dominion University to develop web-based laboratories that would provide students hands-on experience in the virtual domain. A web-based module is developed that allows experimentation and data taking in a virtual setting much like in the physical experiment. This module incorporating the virtual venturimeter has been used by students to take data for several …

Involving Engineering With In-Service K-4 Teachers, Theresa M. Swift, Steve Eugene Watkins, Kristine Swenson, Evalee Lasater, Robert Mitchell

Electrical and Computer Engineering Faculty Research & Creative Works

A strong workforce in science and engineering and literate citizens in a technology-based society depends on an educational system that prepares students in science, mathematics, and engineering. Unfortunately, many K-12 students lose interest in such topics early in their school years. Engineering applications can capture the imagination of students and illustrate the concepts in science and mathematics. Level-appropriate resources are as necessary for primary teachers and our young scholars as for teachers and students in higher grades. A model for interaction between engineers and K-4 teachers is proposed. The State of Missouri defines curriculum standards in each subject area and …

A Matlab-Based Upper Division Systems Analysis Course For Engineering Technology, William D. Stanley, Paul L. Kauffmann, Gary R. Crossman

Engineering Technology Faculty Publications

The Department of Engineering Technology at Old Dominion University offers TAC of ABET accredited baccalaureate programs in Civil Engineering Technology, Electrical Engineering Technology, and Mechanical Engineering Technology. All students are required to take traditional courses in algebra and trigonometry, as well as differential and integral calculus, at the freshman and sophomore levels. While these courses provided the necessary basic mathematical skills, it was difficult to justify the traditional upper-division mathematics courses such as differential equations, vector analysis, etc., as appropriate for the special needs of engineering technology students.

To address this issue, the Department has undertaken the development of a …

Development Of A Training Program In Lean Manufacturing, Alok K. Verma, James Hughes

Engineering Technology Faculty Publications

Lean Manufacturing is quickly becoming a philosophy adopted by manufacturer's through out the world to cut out waste and improve productivity. Lean is a people-centric philosophy, which focuses on changing the work-culture within an organization and across the supply chain. Thus, training the work force in lean principles is a major part of any lean implementation. This paper presents the development of a lean training program for the Apprentice School at Northrop Grumman Newport News. The instructional pedagogy relies on both classroom instruction and hands-on simulation activity to relay lean concepts to students. The training program is being incorporated into …