Engineering Education Commons^™

Ahhhhhhh! Earthquake!, Jarred Green, Eugene Lasarge, Brittany Marcott, Maigan Matthias, Matthew Watts

Von Braun Symposium Student Posters

No abstract provided.

Promoting Stem Education Via The Design And Fabrication Of A Simulated Lunar Vehicle, Henrique Casagrande

Von Braun Symposium Student Posters

No abstract provided.

The Geometric Growth Of M&S Education: Pushing Forward, Pushing Outward, John A. Sokolowski, Catherine M. Banks

VMASC Publications

M&S education is experiencing a geometric growth that is placing it front and center as a discipline and as an interdisciplinary tool. This article discusses the evolution of the discipline of M&S. It answers: Why has M&S education experienced a forward and outward growth? What is it that makes this discipline unique? What is the current state of M&S education?

Challenges To Informed Peer Review Matching Algorithms, Matthew Verleger, Heidi Diefes-Dux, Matthew W. Ohland, Mary Besterfield-Sacre, Sean Brophy

Publications

Background Peer review is a beneficial pedagogical tool. Despite the abundance of data instructors often have about their students, most peer review matching is by simple random assignment. In fall 2008, a study was conducted to investigate the impact of an informed algorithmic assignment method, called Un‐weighted Overall Need (UON), in a course involving Model‐Eliciting Activities (MEAs). The algorithm showed no statistically significant impact on the MEA Final Response scores. A study was then conducted to examine the assumptions underlying the algorithm.

Purpose (Hypothesis) This research addressed the question: To what extent do the assumptions used in making informed peer …

Numerical Simulation Of Marina Storage Fires Using Measured Composite Fire And Thermal Properties, Lulu Sun, Aixi Zhou, Andrew Valente

Publications

Fire test data of boats in rack storage are needed to establish more specific requirements for fire control and protection for this type of vessel in high piled rack storage configurations. Since there is no current large or full scale fire test data available, we have embarked upon testing fire and thermal properties of boat material, fiber reinforced polymer (FRP) composite, by using Differential Scanning Calorimetry, and Cone Calorimeter in order to determine the most effective method to provide sprinkler protection to an indoor boat storage facility. Fire and thermal properties of FRP were obtained from experiments and incorporated into …

Teaching Inquiry-Based Stem In The Elementary Grades Using Manipulatives: A Systemic Solution Report, Louis S. Nadelson, Anne Hay, Pat Pyke, Janet Callahan, Cheryl Schrader

Curriculum, Instruction, and Foundational Studies Faculty Publications and Presentations

Young learners come to school holding myriad conceptions about how the world works, particularly in the areas of science, technology, engineering, and mathematics, or STEM.^1-3 Further, young students' conceptions are commonly based on fragmented knowledge or naïve perspectives that contribute to the importance of early exposure to and practice with scrutinizing situations scientifically.^1,3 An important part of helping children gain the skills necessary to approach situations scientifically involves preparing them to conduct scientific inquiry.³ The development of critical thinking skills and scientific approaches to problem solving should begin early in education.⁴ However, lack of elementary …

Journey To The Center Of A Cv: Our Library’S Role In Developing An Institutional Bibliography, Anne Rauh, Jody T. Hoesly

Anne Rauh

No abstract provided.

Development Of A Technological Literacy Course For Non-Engineering Students: Science Of High Technology, Thomas Howell, Patricia Backer, Belle Wei

Faculty Publications

As citizens, we are confronted by many global and national issues such as the dangers of greenhouse gases and the best choices for energy sources. These questions are fundamentally technical in nature and many people feel ill-equipped to understand the variety of claims and counterclaims as to what is “the truth” on these and other important scientific issues. For many people, the reaction is to give up and accept that the modern world is too complex to understand. To address these issues and improve technological literacy, the College of Engineering (CoE) at San José State University (SJSU) has implemented a …

Hispanic Computer Brigade Silicon Valley Computer Camp, Patricia Backer, Belle Wei

Faculty Publications

Hispanic students are vastly underrepresented in computing during a time when the Hispanic population in the U.S. is growing dramatically. By 2020, Hispanics will account for 50% of the workers in California. And, by 2050, the Hispanic population is projected to triple in the United States with 25% of the U.S. population being of Hispanic origin. The College of Engineering (CoE) at San José State University proposed a new approach for recruiting Hispanic students into computing disciplines and careers through the Hispanic Computer Brigade (HCB) initiative. By forming HCBs in two local high schools, we aimed to inspire and engage …

Year Six Annual Report: Activities, Findings And Evaluators' Reports, Ncete Faculty

Reports to NSF

The National Center for Engineering and Technology Education (NCETE) is a collaborative network of scholars with backgrounds in technology education, engineering, and related fields. Our mission is to build capacity in technology education and to improve the understanding of the learning and teaching of high school students and teachers as they apply engineering design processes to technological problems.

Renewable Energy Education At Merrimack College, Jack Adams

Electrical Engineering Faculty Publications

This paper describes recent, ongoing and planned Renewable Energy (RE) education at Merrimack College. The primary RE education efforts have been through the department of Electrical Engineering (EE), with involvement from the department of Civil Engineering. In summer of 2009 the college installed a solar hot water (SHW) system in one of its student townhouses. The subjects of the advanced EE elective “Energy Measurement and Display” in summer 2009 were the selection of sensors to measure energy delivered by this SHW unit, and the uploading via Ethernet of real time data to a central server. The EE department requires all …

Building A Successful Transatlantic Collaboration In Engineering/Technological Education; Lessons From A Six Year Journey, Donal Mchale, Mark Mcgrath, John Lawlor

Conference Papers

This paper reflects on key learning’s from the first six-years (2004-2010) of the development of a collaborative journey of two trans-Atlantic higher-educational institutions. It describes the progress towards building a sustainable and innovative international educational partnership in Engineering/Technological education between the Technological University Dublin,DublinIrelandandPurdue University,Indiana,USA.

In particular, the paper provides insight into the iterative stages of development of this relationship. It reflects on some of the key challenges and it recognises the critical enablers of success. It focuses on challenges and solutions in the following six important areas

(i) The partnership initiation stage. Key considerations and important enablers of future …

Greening The Curriculum: Augmenting Engineering And Technology Courses With Sustainability Topics, Kurt A. Rosentrater, Elif Kongar

Kurt A. Rosentrater

Duties of engineers and technologists often entail designing and implementing solutions to problems. It is their responsibility to be cognizant of the impacts of their designs on and thus, their accountability to society in general. They must also be aware of subsequent effects upon the environment. They need to be able to concurrently satisfy these often competing priorities as well as constraints specific to the technical challenges at hand. Responding to these contending forces are the growing fields of green engineering and sustainable engineering. Both of these areas encompass many concepts, ideas and tools all of which are essential for …

Public Services Training At Wendt Library, Anne E. Rauh, Anne Glorioso

Anne Rauh

No abstract provided.

Innovation Skills For Tomorrow’S Sustainable Designers, Julie Linsey, Vimal Viswanathan

Faculty Publications, Mechanical Engineering

Tomorrow’s sustainable designers will need an arsenal of tools for innovation. An approach for teaching design methods and innovation is described. A new approach for teaching design methods based on the use of analogous products to provide concrete experiences prior to the method’s application to a novel design problem was evaluated. Students’ opinions of the various design methods and their perceptions of the class’s influence on their creativity were also measured. Past experiments have shown that the presentation of example solutions has the potential to cause design fixation thus limiting the design solutions considered. Due to this, the teams’ final …

Design Assessment: Consumer Reports Style, Todd R. Kelley

Publications

The article analyzes a design assessment-based activity, in which students are asked to evaluate an existing technology through a Consumer Reports-style approach. According to H. Petroski, the exposure of students to several design examples is important to start learning the basic elements needed in the design process. It claims that the activity will enable students to sharpen their knowledge in several areas including identifying design constraints and criteria, training via study of open designs, and practicing engineering design methods for optimization. It suggests that these are important skills for creating the student's capacity to undertake bigger design activities.

Facilitating Teaching And Research On Open Ended Problem Solving Through The Development Of A Dynamic Computer Tool, Matthew Verleger, Heidi Diefes-Dux

School of Engineering Education Graduate Student Series

Model Eliciting Activities (MEAs) are realistic open-ended problems set in engineering contexts; student teams draw on their diverse experiences both in and out of the classroom to develop a mathematical model explicated in a memo to the client. These activities have been implemented in a required first-year engineering course with enrollments of as many as 1700 students in a given semester. The earliest MEA implementations had student teams write a single solution to a problem in the form of a memo to the client and receive feedback from their TA. For research purposes, a simple static online submission form, a …

Asee Student Members’ Needs Analysis: Implications For The Asee Student Constituent Committee, Daniel Bumblauskas, Ana Torres-Ayala, Matthew Verleger

School of Engineering Education Graduate Student Series

No abstract provided.

Developing A Global Real Time Assessment Tool For The Teaching Enhancement Of Engineering Graduate Teaching Assistants, Nathan Mcneill, Jeeyeon Hahn, Asawaree Ajit Kulkarni, Monica F. Cox

School of Engineering Education Graduate Student Series

No abstract provided.

Model Of Students' Success: Important Factors Of Student Persistence In Engineering, Jien-Jou Lin, Qu Jin, P.K. Imbrie

School of Engineering Education Graduate Student Series

No abstract provided.

A Review Of Programmable Logic Controllers In Control Systems Education, Michael R. Foster, Chad Hammerquist, Robert Melendy

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

A Programmable Logic Controller (PLC) is a standard industrial control device that provides a simple, yet robust, method of controlling manufacturing and dynamic processes. As a result of their low cost, adaptability, and reliability, PLCs are by far the most common control mechanism used by manufacturing businesses of all sizes for environment control, food processing, motion control, and automated test equipment. Yet even though PLCs are heavily used by industry, their use in teaching control theory concepts is uncommon for mechanical engineering programs. Traditional control systems engineering courses focus on the theory and mathematics of continuous-based control systems and rarely …

Uncertainty Analysis And Instrument Selection Using A Web-Based Virtual Experiment, Praveen Malali, Pooja Bais, Robert Choate, Sushil Chaturvedi

Mechanical & Aerospace Engineering Faculty Publications

A methodology has been developed and successfully implemented for transforming physical experiments in an undergraduate thermo-fluids laboratory at Old Dominion University (ODU), a doctoral university, into web-based virtual experiments while the Mechanical Engineering (ME) faculty at Western Kentucky University (WKU), an undergraduate university, have developed and implemented a Design of Experiments (DOE) Plan to assure that graduates of their program have acquired the skills necessary to design and conduct experiments and analyze experimental results. This paper presents details about a web-based virtual experiment designed to teach students about selection of instruments based on the uncertainty estimated from the virtual experiment. …

Xperts And Novices: Differences In Their Use Of Mental Representation And Metacognition In Engineering Design, Raymond Anthony Dixon

Dissertations

Research shows that mental representation such as analogical reasoning is a fundamental cognitive tool for design problem solving (Daugherty & Mentzer, 2008; Hey, Lensey, Agogino, & Wood, 2008; Lewis, 2008). Not much is known, however, about the way students and professional engineers actively generate and change their mental representation when solving a engineering design problem. There are very few studies that show how different types of mental representations; such as metaphors, propositions, and analogies; interplay with higher order cognitive processes; such as planning, monitoring, and evaluation; as engineering designers navigate their problem and solution spaces. This empirical study investigated the …

Engineering Professional Development Design For Secondary School Teachers: A Multiple Case Study, Jenny L. Daugherty

Publications

The effectiveness of teachers has been regarded as crucial to the success of standards-based reform (Fishman, Marx, Best, & Tal, 2003). Research, particularly within science and mathematics, has underscored the need for professional development to help teachers understand (a) subject matter, (b) learners and learning, and (c) teaching methods (Loucks-Horsley, 1999). In addition to focusing on teacher professional development, national reform efforts have also emphasized science, technology, engineering, and mathematics (STEM) education (i.e., Rising Above the Gathering Storm, NRC, 2006). While substantial work has been conducted in mathematics and science, the efforts in technology and engineering education are much less …

Optimization, An Important Stage Of Engineering Design, Todd R. Kelley

Publications

The presents information on optimization, an important stage of engineering design. Criteria and design constraints are used in the optimization stage of the engineering design process to allow the designer to locate the optimal solution. Before initiating a prototype work, both analysis and optimization are done in designing a product. Optimization is done to create the best design relative to a set of prioritized criteria or constraints, including maximizing factors such as productivity, strength, reliability, longevity, efficiency and utilization.

Stem Education And Leadership: A Mathematics And Science Partnership Approach, Chris Merrill, Jenny Daugherty

Publications

The issue of attracting more young people to choose careers in science, technology, engineering, and mathematics (STEM) has become critical for the United States. Recent studies by businesses, associations, and education have all agreed that the United States’ performance in the STEM disciplines have placed our nation in grave risk of relinquishing its competitive edge in the marketplace (e.g., Rising above the gathering storm, 2007). A Congressional Research Service (2006) report stated that, a “large majority of secondary students fail to reach proficiency in math and science, and many are taught by teachers lacking adequate subject matter knowledge” (Congressional Research …

Engineering Student Outcomes For Infusion Into Technological Literacy Programs: Grades 9-12, Craig Rhodes, Vincent Childress

Publications

In 2004, the National Center for Engineering and Technology Education (NCETE) secured funding from the National Science Foundation (NSF) to infuse engineering design into the schools through technology education. In order to reach this goal the researchers, in cooperation with NCETE, conducted a two phase study to identify outcomes for high-school students studying engineering. The first study (referred to as a Phase I) focused on students who intended to enter an engineering program after high school, answering the question:

What are the engineering student outcomes that prospective engineering students in grades 9 through 12 should know and be able to …

Graduate School Of Engineering And Management 2010-2011 Catalog, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Gains In Knowledge And Perception Of Engineering After Participation In An Engineering Design Web-Experience Are Gender-Dependent, Kimberly Edginton Bigelow, Gail Wheatley, David Tomasko

Mechanical and Aerospace Engineering Faculty Publications

Web-based activities have the potential to teach engineering in both formal and informal science education settings, maximizing outreach efforts. To date, many activities available on the internet teach about engineering, but few allow students to truly “do” engineering.

This project utilized web animation and interaction in the design of a web-based experience focused on engineering design. In this activity, targeted toward middle school students, users played the role of engineer and engaged in the process of designing a cell phone for the older adult market. It was hoped that this web-based activity would increase participant understanding of what engineering is …

Research In Technology Education, Philip A. Reed (Editor), James E. Laporte (Editor)

STEMPS Faculty Books

Due to the laboratory-based nature of technology and engineering education programs, professionals in our field have often focused on the resources in our classrooms and laboratories and the instructional methodologies used to address specific concepts. Formal research into content and practice has often given way to “what seems right”. New curriculum is constantly being introduced (based on what is occurring in business and industry), yet the inclusion for those evolving concepts in courses and programs is typically not verified.

Hence, the importance of the 2010 CTTE yearbook and its focus on the dire need for an aggressive research agenda in …