Engineering Education Commons^™

Two Sides To Every Psyche: Implications Of Positive Psychology For "Mental Health" Research In Engineering Education, Muhammad Asghar, Angela Minichiello

Engineering Education Student Research

“Mental Health.” Throughout the 20th century, these familiar words have been quietly commandeered by a physiological model of health (Greenspoon & Saklofske, 2001). Unknowingly, society conspired to use these words—colloquially, academically, and scientifically—for the sole purpose of depicting (or implying) negative states of the human mind. Since the origins of psychological research over 100 years ago, our understanding of what mental health is has been conflated with notions of mental illness. Resultantly, we have tacitly agreed that the presence or absence of suffering is the sole implication of our mental health (Horwitz & Scheid, 1999).

Perceived Factors Contributing To The Subjective Wellbeing Of Undergraduate Engineering Students: An Exploratory Study, Muhammad Asghar, Angela Minichiello, Assad Iqbal

Engineering Education Student Research

Engineering education is perceived to be a tough field of study with detrimental effects on the mental health of undergraduate engineering students. High levels of anxiety and depression are reported among this population. Overall, mental health research is often biased toward looking at mental health from a deficit perspective and investigating mental health as a negative phenomenon. This trend also persists in engineering education research. The purpose of this exploratory study, therefore, is to investigate the condition of subjective wellbeing (SWB) of undergraduate engineering students to understand the factors that they perceive as positively contributing to their overall wellbeing in …

Afit By The Numbers, Fy2022, Air Force Institute Of Technology

AFIT Documents

No abstract provided.

Use Of Ai And Machine Learning For Engineering Applications, Max Rios Carballo

Publications and Research

In this paper, we examine how artificial intelligence (AI) and computer-based intelligence (CBI) may be used to address design challenges. We examine artificial intelligence (AI) and machine learning (ML) as they relate to developing applications from the inside out, highlighting the most challenging issues as well as intriguing research areas for further consideration.

How Engineering Education Guilds Are Expanding Our Understanding Of Propagation In Engineering Education, Kaitlin Mallouk, Alexandra C. Strong, Darby R. Riley, Courtney J. Faber

Henry M. Rowan College of Engineering Faculty Scholarship

Background: The National Science Foundation (NSF) and other organizations have spent millions of dollars each year supporting well-designed educational innovations that positively impact the undergraduate engineering students who encounter them. However, many of these pedagogical innovations never experience widespread adoption. To further the ability of innovation developers to advance engineering education practice and achieve sustained adoption of their innovations, this paper focuses on exploring how one community-based model, engineering education guilds, fosters propagation across institutions and individuals. Engineering education guilds seek to work at the forefront of educational innovation by creating networks of instructor change-agents who design and implement a …

Undergraduate Engineering And Education Students Reflect On Their Interdisciplinary Teamwork Experiences Following Transition To Virtual Instruction Caused By Covid-19, Kristie S. Gutierrez, Jennifer J. Kidd, Min Jung Lee, Pilar Pazos, Krishnanand Kaipa, Stacie I. Ringleb, Orlando Ayala

Teaching & Learning Faculty Publications

This study explores undergraduate engineering and education students’ perspectives on their interdisciplinary teams throughout the rapid transition to online learning and instruction from a face-to-face to a virtual format. In this qualitative study, students’ reflections and focus groups from three interdisciplinary collaborations were analyzed using the lens of Social Cognitive Theory. COVID-19 created a dramatic change in the environment such that the most immediate and direct impact on students’ experiences was on the environmental aspects of Bandura’s triadic reciprocal determinism model, which then triggered behavioral and personal responses to adapt to the new environment. Subsequent evidence of reciprocal effects between …

Developing Optical Devices And Projects For Teaching Engineering, Nathan D. Lemke, John Mccauley, Tristan E. Noble, Grace Riermann, Ellesa St. George, Nathan C. Lindquist, Keith R. Stein, Karen Irene Rogers

Physics and Engineering Faculty Publications

We are creating a suite of tools and techniques based on optics to be used for teaching a variety of engineering topics. Each tool is intended for non-expert use and without the need for high-end equipment such as vibration-free optical tables. Here we report progress on three such tools: image-plane digital holography for measuring mechanical deformation; schlieren imaging of convective flows using a smart phone; and a simple optical communication protocol using LabVIEW. We will present the designs of the tools and preliminary results from teaching engineering labs and projects with these tools. Specific courses impacted to date include Fluid …

Could The Inclusion Of Certain Building Information And Modelling Aspects Into The Leaving Certificate Engineering Syllabus, Aid The Transition Of Students Into Third Level Education, When Choosing A Course Within The Construction Industry, Joseph Boyle, Deborah M. Brennan

Capstone Reports

The paper investigates the effects of implementing several Building Information and Modelling (BIM) aspects into the Leaving Certificate Engineering Syllabus and examines the impact this has on students choosing third level Architectural Engineering and Construction (AEC) industry courses with the desire of improving the shortage in the sector. The method and content of the study was based on academic research on second level education in other European countries through the lens of a Literature Review. A sixteen-week pilot program was trialed with over one hundred students at Senior Cycle. The outcomes of the study were critically evaluated through stakeholder interviews …

The Influence Of Disciplinary Background On Peer Reviewers’ Evaluations Of Engineering Education Journal Manuscripts, Kelsey Watts, Gary Lichtenstein, Karin Jensen, Evan Ko, Rebecca Bates, Lisa Benson

Integrated Engineering Department Publications

This is the first of a series of studies that explore the relationship between disciplinary background and the weighting of various elements of a manuscript in peer reviewers’ determination of publication recommendations. Research questions include: (1) To what extent are tacit criteria for determining quality or value of EER manuscripts influenced by reviewers’ varied disciplinary backgrounds and levels of expertise? and (2) To what extent does mentored peer review professional development influence reviewers’ EER manuscript evaluations? Data were collected from 27 mentors and mentees in a peer review professional development program. Participants reviewed the same two manuscripts, using a form …

Building A Community Of Mentors In Engineering Education Research Through Peer Review Training, Karin Jensen, Lisa Benson, Kelsey Watts, Gary Lichtenstein, Evan Ko, Rebecca Bates

Integrated Engineering Department Publications

Peer review of scholarship is critical to the advancement of knowledge in a scholarly discipline. Despite this, scholars receive little or no training in effective and constructive peer review. The process of peer review has been routinely criticized in higher education for lack of quality reviews and reviewers, and reviews that are personal and not constructive. As a discipline, engineering education research (EER) benefits from diverse disciplinary backgrounds and perspectives of scholars, and as such relies on peer review of scholarship to generate, interpret, and translate knowledge. Supported by funding through the National Science Foundation, this project is developing, implementing, …

Laying The Foundation For Education 4.0: Access, Value And Accountability, Jennifer Karlin, L. Eric James, Lauren Singelmann, Dan Ewert

Integrated Engineering Department Publications

The complexity of the global problems engineers are working to solve has long been discussed in both engineering and engineering education circles. The Grand Challenges for Engineering are grand because of the complexity of the challenges. While the challenges stand over a decade later, the speed at which the terms in which they are described, the shift from Industry 3.0 to Industry 4.0, has been slow. As the world becomes more deeply connected, as the internet of things becomes more commonplace in all parts of our lives, as technologies like machine learning and cyber physical systems become accessible to even …

Complexity In The Classroom Workshop: Teaching And Learning The Cynefin Framework By Applying It To The Classroom, Jennifer Karlin, L. Eric James, Lauren Singlelmann

Integrated Engineering Department Publications

Complex adaptive systems are both an important fundamental principle in systems engineering education and a reality of all engineering education. The Cynefin framework, as created by Snowden and Boone (2007), is a decision-making tool that helps the engineer recognize the type of system within which they are operating and then respond in a manner that is appropriate for the cause-and-effect relationships associated with that system type. The types of system, or the domains, fall into five categories and their liminal spaces: obvious, where the cause-and-effect relationships are clear to everyone involved; complicated, where the cause-and-effect relationships are clear to those …

A Multi-Decade Response To The Call For Change, Bart Johnson, Ron Ulseth, Mike Raich

Integrated Engineering Department Publications

Engineering and society have always been intertwined, especially with the accepted realization of technology's significant and rapidly increasing influence on the evolution of society. As a profession, engineering has a vital role in sustainably meeting needs and exploring opportunities that are ever changing and evolving. As societal and industry needs have evolved, engineering education itself has raised the call several times for evolving the way engineers are educated; however, the recent history of engineering education is, overall, one of missed opportunities. This was brought to a headline recently as ASEE leadership authored an article entitled “Stuck in 1955, Engineering Education …

Working Full Time And Earning An Engineering Degree: Wellbeing In A Co-Op-Based Engineering Program, Catherine Mcgough Spence, Luke Nyberg, Justine Chasmar, Jodi Nelson, Marissa Tsugawa

Integrated Engineering Department Publications

The purpose of this research paper is to describe how stress manifests in undergraduate engineering students who are working in paid engineering positions while completing their upper-division coursework, through the analysis of reflective prompts on wellbeing, and engineering belongingness. Previous research has identified the culture of “suffering and shared hardship” where heavy workloads and stressful situations are expected in engineering programs and engineering as a discipline. Stress, specifically feelings of being overwhelmed with workload, has far reaching implications for an individuals’ wellbeing beyond academic performance.

We focus on the frameworks of self-determination theory, engineering belonging, identity, to better understand undergraduate …

Engineering Stress Culture In Project-Based Engineering Programs, Lin Chase, Catherine Sleezer, Robert Sleezer, Michelle Soledad

Integrated Engineering Department Publications

Background: This research paper examines engineering stress culture in the context of project-based learning engineering programs at the university level. Multiple authors have reported that the culture of engineering and engineering education can be stressful and exclusive. A study conducted by Jensen and Cross [9] found that measures of inclusion such as "Department Caring" and "Department Pride" were negatively correlated with stress, anxiety, and depression. We used the approach developed by Jensen and Cross to examine stress culture in the context of three project-based learning engineering programs.

Purpose: Our goal was to establish a baseline of measures of mental health …

An Integrated Engineering Model For Advising, Rebecca Bates, Catherine Mcgough Spence, Darcie Christensen, Robert Sleezer, Jodi Nelson, Ryan Walerius, Rachael Johnson

Integrated Engineering Department Publications

This evidence-based practice paper describes the theoretical foundations of the supportive advising practices used by the Integrated Engineering Department (IE) at Minnesota State University, Mankato. The driving motivation for the advising model is to support the development of student engineers as whole people. Generally in academia, faculty in traditional professor roles serve as formal advisors, mentors, facilitators, evaluators, and coaches and are joined by full-time staff that serve in roles to support student development. Integrated Engineers at Minnesota State University, Mankato are supported to become the engineer they want to be. This paper describes the unique model employed by IE …

What Do Undergraduate Engineering Students At The Onset Of Emergency Hybrid Learning During Covid-19 Say About Peer Mentorship?, Darcie Christensen, Idalis Villanueva

Integrated Engineering Department Publications

This complete research paper addresses the perceptions of undergraduate engineering students during the onset of the worldwide pandemic (COVID-19) in an engineering college at a western institution of the United States. Specifically, these students were asked about their perceived needs around peer mentorship amidst pivoting between hybrid and in-person learning at the onset of COVID-19.

Mentorship is defined as the interaction between two individuals whose goal is to help one another in psychosocial matters, support personal and professional growth, and provide career guidance. Generally, there are two main types of mentorships recognized: traditional and peer. Traditional mentorship involves a mentor …

Examination Of Ableist Educational Systems And Structures That Limit Access To Engineering Education Through Narratives, Marissa Tsugawa, Brady Webster, Sakshi Solanki, Autumn Cuellar, Catherine Mcgough Spence

Integrated Engineering Department Publications

The purpose of this paper is to examine how higher education systems limit access to engineering education for disabled and neurodivergent engineering students. Throughout this paper we will discuss ableism in higher education systems. Particularly, U.S. institutions and education are designed for non-disabled and neurotypical people rather than with accessibility for all despite legal efforts to improve access to education. We also provide two narratives from the authors that describe their experiences with having a disability and being neurodivergent in engineering education. Finally, we suggest other paradigms and methodologies engineering education researchers can utilize when conducting research on disability and …

Byoe: Making Connections Between Fluid Mechanics And Abstract Painting, Thomas Shepard, Charles Mossey, Jacob Swanson, Colin Huntington, Mary Murphy

Integrated Engineering Department Publications

This bring your own experiment (BYOE) paper details two iterations of a hands-on painting project that has been well-received by fluid mechanics students. In the conception of this project the authors have explored many of the relevant parameters for different painting techniques: drip painting, pendulum painting spray painting, and acrylic pours – one subset of which is spinning pours. These methods were explored both in terms of relevant fluid mechanic phenomenon as well as with hands-on experimentation, reviewing instructional videos and talking with artists. These efforts led to creation of short instructional videos that students can watch before undertaking their …

“But I’M Not An Engineer”… Collaboration Between A Librarian And An Upper Division Project-Based Engineering Program, Rebecca Bates, Robert Sleezer, Heidi J. Southworth

Integrated Engineering Department Publications

Since 2013, a librarian at Minnesota State University, Mankato has collaborated with faculty and students in an upper division project-based engineering program. While having several years of experience in university libraries plus advanced degrees in history, the librarian had a limited background in science, engineering, and technology, and lacked a formal engineering degree. At first glance, this match may appear to be a recipe for failure. Indeed, in those first few years, the librarian’s angst about the missing engineering degree caused many sleepless nights of worry and concern. However, there came a time when the words “but I am not …

A Community Framing Of Integrated Engineering, Rebecca Bates, Susan Lord, Emanuela Tilley, Jenna Carpenter

Integrated Engineering Department Publications

The term “integrated engineering” is being used in new education programs. As a framing concept, we believe it has value for the wider engineering education community. A small group of program heads has facilitated conversations about how integrated engineering could benefit other programs and the community in general. This paper provides background and describes some of the outcomes of past conversations with the goal of including more voices in the conversation and initializing the formal use of integrated engineering as a prompt for improving engineering education.

Building Partnerships To Bridge The Transfer Gap And Increase Student Success, Cody Mann, Andrew Hanegmon, Anthony Venditto, Katherine Ulseth, Frankie Wood-Black, Liz Cox, Michelle Soledad

Integrated Engineering Department Publications

Transfer partnerships continue to be one of the most critical elements of student success. The purpose of this paper is to highlight the bridges and transfer gaps from a two-year college to a university and respect the value of the support and knowledge students are currently receiving at their community college, from the context of the practices and experiences of Iron Range Engineering - Bell. The transfer process, afterall, can be daunting to some students who plan to transition from a community college to a university to finish a Bachelor’s degree. Iron Range Engineering - Bell is a unique, co-op …

Integrating Plcs With Robot Motion Control In Engineering Capstone Courses, Sanjeevi Chitikeshi, Shirshak K. Dhali, Vukica Jovanovic

Engineering Technology Faculty Publications

Robotic motion control methods and Programmable Logic Controllers (PLCs) are critical in engineering automation and process control applications. In most manufacturing and automation processes, robots are used for moving parts and are controlled by industrial PLCs. Proper integration of external I/O devices, sensors and actuating motors with PLC input and output cards is very important to run the process smoothly without any faults and/or safety concerns. Most traditional electrical and computer engineering (ECE) programs offer high level of motion theory and controls but little hands-on exposure to PLCs which are the main industrial controllers. This paper provides a framework for …

Introduction To Aerospace Flight Vehicles, J. Gordon Leishman

OER Main

The overarching concept of this eTextbook is to give students a broad-based introduction to the aerospace field, emphasizing technical content while making the material attractive and digestible. This eTextbook is structured and split into lessons centered around a 50-minute lecture period. Each lesson includes text content with detailed illustrations, application problems, a self-assessment quiz, and topics for further discussion. In addition, hyperlinks to additional resources are provided to support students who want to delve deeper into each topic. At the end of the eTextbook, there are many more worked examples and application problems for the student. While many lessons will …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

An Applied Electromagnetics Course With A Conceiving-Designing-Implementing-Operating Approach In Engineering Education, M. R. Pérez-Cerquera, Hurtado Londono, Juan M. Cruz-Bohorquez

Henry M. Rowan College of Engineering Faculty Scholarship

This paper describes and discusses the implementation of a project-based undergraduate course on applied electromagnetics in electronics engineering with a conceiving-designing-implementing-operating (CDIO) approach involving active project-based learning (PBL). The course, which requires a combination of mathematical and physics concepts for its completion, allows students to understand the principles of electromagnetic transmission theory in wireless communication systems. This paper presents the course proposal, its project description, and results hinting at the relationship with the CDIO process. The proposed projects allow students to engage in core concepts such as complex vectors, Maxwell’s equations, boundary conditions, Poynting's theorem, uniform plane waves, reflection and …

Perceptions Of Future Careers For Middle Year Engineering Students, Catherine Mcgough Spence, Adam Kirn, Lisa Benson

Integrated Engineering Department Publications

Background: One facet of motivation relevant to students' learning is their perceptions of the future, including future career goals and how those perceptions influence their present actions; this is collectively referred to as their future time perspective (FTP).

Purpose/Hypothesis: This study describes the different FTPs of engineering students. We aim to help researchers and practitioners leverage students' motivations to improve learning experiences and inform future studies by providing a model of engineering students' FTP.

Design/Method: A phenomenographic approach was used to determine students' different characteristic FTPs within the context of their engineering courses. Interviews with engineering students (n=18) at a …

Engineering Education In Developing Nations: Progress On The School Of Engineering At Northrise University In Ndola, Zambia, Jeff Gladstone, Gitogo Churu, John Tixier, Nolan Van Gaalen

Faculty Work Comprehensive List

The engineering and technology capabilities of developed nations continues to advance and to be a major driver of the economies of those nations. Developing nations recognize this reality, and they accordingly recognize the importance of nurturing the growth of their own countries’ STEM capabilities. Engineering education in developing nations is thus a critical need; but it is work that, for a variety of reasons, tends to be under-resourced by developing nations themselves as well as by potential participants from developed nations. As followers of Jesus, we sometimes find our hearts stirred on behalf of our brothers and sisters in Christ …

"But I'M Not An Engineer"...Collaboration Between A Librarian And An Upper Division Project-Based Engineering Program, Heidi J. Southworth, Rebecca Bates, Robert Sleezer

Library Services Publications

Since 2013, a librarian at Minnesota State University, Mankato has collaborated with faculty and students in an upper division project-based engineering program. While having several years of experience in university libraries plus advanced degrees in history, the librarian had a limited background in science, engineering, and technology, and lacked a formal engineering degree. At first glance, this match may appear to be a recipe for failure. Indeed, in those first few years, the librarian’s angst about the missing engineering degree caused many sleepless nights of worry and concern. However, there came a time when the words “but I am not …

"But I'M Not An Engineer"...Collaboration Between A Librarian And An Upper Division Project-Based Engineering Program, Heidi J. Southworth, Rebecca Bates, Robert Sleezer

Library Services Publications

Since 2013, a librarian at Minnesota State University, Mankato has collaborated with faculty and students in an upper division project-based engineering program. While having several years of experience in university libraries plus advanced degrees in history, the librarian had a limited background in science, engineering, and technology, and lacked a formal engineering degree. At first glance, this match may appear to be a recipe for failure. Indeed, in those first few years, the librarian’s angst about the missing engineering degree caused many sleepless nights of worry and concern. However, there came a time when the words “but I am not …