Engineering Education Commons^™

Community College Engineering Degree Partnerships With 4-Year Universities, Jeffrey Mark Stear

Electronic Theses and Dissertations

Increasing the number of STEM professionals and reducing inequities in STEM are national priorities. Community colleges are important to address these concerns because they represent a higher percentage of underrepresented minority (URM) and women students. However, students starting 4-year STEM degrees in community college have had a lower completion rate. Partnerships between community colleges and 4-year universities have the potential to improve success for community college students, but more research is necessary. The purpose of this ex post facto, quantitative, correlational study was to determine the relationships among participation in different types of partnerships between community colleges and 4-year universities, …

First-Year Engineering Students’ Motivation To Participate In Virtual International Collaborative Experiential Program (Vicep): An Expectancy-Value-Cost Approach, Cedrick Kwuimy, So Yoon Yoon

Journal of International Engineering Education

Changes in course delivery mechanisms necessitated by the COVID-19 pandemic created an opportunity to develop a Virtual International Collaborative Experiential Program (VICEP) as an alternative to traditional, travel-based study abroad programs. This paper presents the results of an investigation of engineering students’ motivation, perceived challenges, and preferred geographic areas for the VICEP. A sample of 116 first-year engineering students at the University of Cincinnati responded to survey items regarding their perceptions of motivation to participate in the VICEP, including in terms of expectancy, value, and cost, along with open-ended questions. Both male and female students scored the highest on value …

Guidelines For Sustainable Use Of Mobile Instant Messaging Apps In Higher Education: A South African Case Study, Bronwyn C. Swartz, Sweta Patnaik

Higher Learning Research Communications

Objective: The purpose of the study was to propose guidelines to facilitate the sustainable and successful use of mobile instant messaging apps for learning and teaching based on a review of the literature and perceptions of educators. Fraser’s model of redistribution, recognition, and representation served as the theoretical framework. This study provides a mechanism for the development of a socially just and inclusive online classroom environment.

Method: We conducted two focus groups (n = 4 and n = 3) in November 2021 at a university of technology in South Africa to explore the perceptions of educators on using mobile …

Embracing Identities And Affirming Agency: Exploring Effective Mentorship For Women Doctoral Students In Engineering Disciplines Using An Intersectional Lens, Jennifer Brown

All Dissertations

Positive mentoring experiences are crucial for retaining and advancing those who hold marginalized identities in STEM, as they foster a greater sense of belonging and self-efficacy that encourage these students to persist in their fields. Marginalized identities in STEM include, but are not limited to, women, BIPOC (Black, Indigenous, and People of Color), low-income, first-generation, neurodivergent, and members of the LGBTQ+ community. Oftentimes, these identities intersect, introduce additional nuance in interactions within engineering spaces, and affect the mentoring support that both mentees and their mentors require.

Prior research has shown the reciprocal value that is created when graduate students are …

Teaching To Develop Perspective, Skills, Confidence, And Identity As Problem-Solving Engineers, Russell Kirk Pirlo

Research and Reflection on Learning and Teaching in Higher Education

The “core” of an engineering degree program typically comprises the concepts, equations, and technical skills needed, as well as their practical application to common problems of the profession. This core is then divided into the “content” that must be covered in each course. It is widely recognized, however, that successful individuals do not thrive as professionals on content alone. Thus, there is significant and increasing emphasis across higher education to “educate the whole person.” These efforts aim to develop “deep” qualities like grit, critical thinking, perseverance, learning from failure, valuing diversity, teamwork, leadership, curiosity, recognizing opportunity, creating value, and acting …

Re(Engineering) Student Success: Constructing Knowledge On Students’ Experiences In Engineering Education Programs To Encourage Holistic Student Success, Shaylin Williams

Theses and Dissertations

If a group of engineering deans were asked whether students at their institutions were successful and why, what information might they immediately or subconsciously use to measure or gauge the engineering students’ success? If only academic performance outcomes like GPA, individual course grades, or graduation rate race to their minds, then their rationale aligns with the majority of researchers. My research seeks to shift the mindset that frames engineering student success mainly within the boundaries of academic performance measures. By measuring students’ perceived autonomy, competence, social integration and relatedness within their programs, and aspirations after graduation, one can more accurately …

Examining The Influence Of The Classroom Environment On Motivation, Belonging, And Academic Confidence In Engineering Education: A Relational Developmental Systems Approach, Robert O'Hara

All Dissertations

This dissertation explores the impact of the classroom environment on undergraduate engineering students by integrating three manuscripts using the process-person-context-time (PPCT) model within Bioecological Systems Theory. Each manuscript focused on students’ sense of belonging, motivation, and academic confidence. The study confirms prior research suggesting a link between students' perceptions of the environment and their sense of belonging, motivation, and academic confidence. The findings highlight the complex nature of student and classroom environment relationships throughout their college experience. Moreover, the results are demonstrated across different engineering majors. Overall, this dissertation highlights the significance of understanding the complex interactions between students and …

The Unstoppable Rise Of Ai: An Interview With Dr. John Sanford, Spencer Burrows, And Anna Birchler, Brandon Powell, Spencer Burrows

International Journal of Emerging and Disruptive Innovation in Education : VISIONARIUM

AI can both help and hurt the education field (higher education and secondary education). Despite Hollywood’s depiction of artificial intelligence solely in the form of killer death robots decades into the future, AI is much more versatile - and far more dangerous - than any killer robot could be. As artificial intelligence develops at a breakneck pace, its effect on our society will increase exponentially.

An Investigation Of The Advantages And Disadvantages Of University Students As Avatars In Virtual Learning Spaces, Gary Burnett, Catherine Harvey

International Journal of Emerging and Disruptive Innovation in Education : VISIONARIUM

Authors have noted the increasing importance of avatars in Higher Education, as more teaching is conducted virtually, drawing upon gaming conventions. However, it is also recognised that little is known about how students make use of avatars (especially over an extended period) and the subsequent impact on learning experiences. For the last three years, a university module has been conducted within a persistent virtual world – where students (49 in 2020; 95 in 2021; 122 in 2022) predominantly interact with each other and teaching staff in avatar form. Observation data constitutes 60 hours of video recordings of virtual world seminars. …

Impact Of Critical Narrative On Students’ Abilities To Recognize Ethical Dilemmas In Engineering Work, Jeff Brown, Chad Rohrbacher, Taylor J. Mitchell, Dr. Leroy Long Iii, Jenna Korentsides, Joseph R. Keebler

Publications

This study aims to investigate the impact of exposure to critical narratives on students' abilities to recognize ethical dilemmas and broader impacts in engineering work. Critical narratives are place-based stories that engage students and help them enhance their critical thinking skills by making connections between the narratives, broader impacts of engineering work, and their responsibility to address these issues. The effectiveness of the critical narrative intervention was assessed by implementing discussion-based assignments around three critical narratives, which required students to listen to the narrative, respond to focus questions, engage with their peers, and reflect on the process. The intervention was …

Using Self-Efficacy Theory To Design Arduino Instruction For Novices: A Replication Study, Donald M. Johnson, Michael Pate, Christopher M. Estepp, George Wardlow

Journal of Research in Technical Careers

A replication study was conducted to determine the effectiveness of an instructional treatment based on self-efficacy theory when used with novice Arduino microcontroller users. Students (n = 32) in an introductory university agricultural systems technology course participated in a lesson on Arduino microcontrollers, circuit breadboarding, and Arduino programming which included four hands-on practice tasks, designed to provide students with positive mastery, vicarious and social persuasion experiences. Next, students completed a laboratory activity and were provided additional opportunities for mastery, vicarious, and social persuasion experiences. The one-group pretest-posttest design indicated the instructional treatment had significant (p < .001) and large effects in increasing students’ interest in Arduino, breadboarding self-efficacy, programming self-efficacy, and Arduino knowledge. These findings were consistent with the original study and provided additional evidence for self-efficacy theory as an effective model for developing instruction for novice Arduino users. Students’ written comments provided additional insight concerning the instructional treatment.

Approach To Problem Solving And Use Of Intuition By Engineering Technology Students, Meher R. Taleyarkhan, Anne M. Lucietto, Natalie L. F. Hobson, Therese M. Azevedo

Journal of Global Education and Research

Engineering technology students often forgo a methodical approach of solving or answering questions on assignments or exams in favor of an intuition-based approach, emphasizing educated guessing (Broberg et al., 2008). Faculty observations have noted these student solutions often provide explanations, usually sans calculations, to support answers the students believe to be reasonable when in reality deviated from the correct answer. An extensive study was developed to assess several distinctions between student intuition and use of cognition in problem solving, as related to a generalized student population. The study was comprised of a survey and interview. The survey utilized two instruments, …

Informal Learning As Opportunity For Competency Development And Broadened Engagement In Engineering, Madeline Polmear, Shannon Chance, Roger Hadgraft, Corrinne Shaw

Books/Book chapters

Informal learning is increasingly being recognized as a way to complement the formal curriculum within engineering and provide additional opportunities for competency development while engaging diverse students. Learning about engineering occurs throughout life, via experiential and spontaneous opportunities that inform our understandings of the world. Learning is not confined to the engineering curriculum and class time but, rather, continues informally and implicitly throughout the daily lives and activities of university students. Often framed in contrast to formal learning, informal learning is more as it represents a significant portion of students’ time and effort and contributes to their persistence, competence development, …

Fy2022 Annual Report Of The Graduate School Of Engineering And Management, Air Force Institute Of Technology, Office Of The Dean Of The Graduate School Of Engineering And Management, Air Force Institute Of Technology, Adedeji B. Badiru

AFIT Documents

The annual report is published each year by AFIT’s Office of the Dean, Graduate School of Engineering and Management at Wright-Patterson Air Force Base, Ohio. It shares information about the activities of the Graduate School with the U.S. Department of the Air Force (DAF), Department of Defense (DoD), and wider public.

Graduate School Academic Catalog 2023-2024, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Preparing Undergraduates For The Post-Pandemic Workplace: Teams Of Education And Engineering Students Teach Engineering Virtually, Kristie S. Gutierrez, Jennifer Kidd, Min J. Lee, Krishnanand Kaipa, Orlando Ayala

Teaching & Learning Faculty Publications

When schools and universities across the world transitioned online due to the COVID-19 pandemic, Ed+gineering, a National Science Foundation (NSF) project that partners engineering and education undergraduates to design and deliver engineering lessons to elementary students, also had to shift its hands-on lessons to a virtual format. Through the lens of social cognitive theory (SCT), this study investigates engineering and education students’ experiences during the shift to online instruction to understand how they perceived its influence on their learning. As a result of modifying their lessons for online delivery, students reported learning professional skills, including skills for teaching online and …

How Does Working On An Interdisciplinary Service-Learning Project Vs. A Disciplinary Design Project Affect Peer Evaluators' Teamwork Skills, Isaac Koduah Kumi, Stacie I. Ringleb, Orlando M. Ayala, Pilar Pazos, Francisco Cima, Krishnanand Kaipa, Min Jung Lee, Kristie Gutierrez, Jennifer Jill Kidd

Mechanical & Aerospace Engineering Faculty Publications

Over the course of several semesters, two different project-based learning approaches were used in two undergraduate engineering courses–a 100-level introductory course that covered a general education requirement on information literacy and a 300-level fluid mechanics course. One project (treatment) was an interdisciplinary service-learning project, implemented with undergraduate engineering and education students who collaborated to develop and deliver engineering lessons to fourth and fifth-grade students in a field trip model. The other projects (comparison) involved a team-based design project contained within each class. In the 100-level course, students selected their project based on personal interests and followed the engineering design process …

The Impact Of A Multidisciplinary Service-Learning Project On Engineering Knowledge And Professional Skills In Engineering In Engineering And Education Students, Stacie I. Ringleb, Pilar Pazos, Francisco Cima, Isaac Koduah Kumi, Orlando M. Ayala, Krishnanand Kaipa, Jennifer Jill Kidd, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

A multidisciplinary service-learning project that involved teaching engineering to fourth and fifth graders was implemented in three sets of engineering and education classes to determine if there was an impact on engineering knowledge and teamwork skills in both the engineering and education students as well as persistence in the engineering students. Collaboration 1 paired a 100-level engineering Information Literacy class in Mechanical and Aerospace Engineering with a 300-level Educational Foundation class. Collaboration 2 combined a 300-level Electromechanical Systems class in Mechanical Engineering with a 400-level Educational Technology class. Collaboration 3 paired a 300-level Fluid Mechanics class in Mechanical Engineering Technology …

Global Engineering Ethics: What? Why? How? And When?, Rockwell F. Clancy Iii, Qin Zhu

Journal of International Engineering Education

Even though engineering programs, accreditation bodies, and multinational corporations have become increasingly interested in introducing global dimensions into professional engineering practice, little work in the existing literature provides an overview of questions fundamental to global engineering ethics, such as what global engineering ethics is, why it should be taught, how it should be taught, and when it should be introduced. This paper describes the what, why, how, and when of global engineering ethics – a form adopted from a 1996 article by Charles Harris, Michael Davis, Michael Pritchard, and Michael Rabins, which has influenced the development of engineering ethics for …

Online Proctoring’S Impact On Students And Student Privacy, Tessca Almeida

The Journal of Purdue Undergraduate Research

No abstract provided.

Undergraduate Engineering And Education Students Reflect On Their Interdisciplinary Teamwork Experiences Following Transition To Virtual Instruction Caused By Covid-19, Kristie S. Gutierrez, Jennifer J. Kidd, Min Jung Lee, Pilar Pazos, Krishnanand Kaipa, Stacie I. Ringleb, Orlando Ayala

Teaching & Learning Faculty Publications

This study explores undergraduate engineering and education students’ perspectives on their interdisciplinary teams throughout the rapid transition to online learning and instruction from a face-to-face to a virtual format. In this qualitative study, students’ reflections and focus groups from three interdisciplinary collaborations were analyzed using the lens of Social Cognitive Theory. COVID-19 created a dramatic change in the environment such that the most immediate and direct impact on students’ experiences was on the environmental aspects of Bandura’s triadic reciprocal determinism model, which then triggered behavioral and personal responses to adapt to the new environment. Subsequent evidence of reciprocal effects between …

Laying The Foundation For Education 4.0: Access, Value And Accountability, Jennifer Karlin, L. Eric James, Lauren Singelmann, Dan Ewert

Integrated Engineering Department Publications

The complexity of the global problems engineers are working to solve has long been discussed in both engineering and engineering education circles. The Grand Challenges for Engineering are grand because of the complexity of the challenges. While the challenges stand over a decade later, the speed at which the terms in which they are described, the shift from Industry 3.0 to Industry 4.0, has been slow. As the world becomes more deeply connected, as the internet of things becomes more commonplace in all parts of our lives, as technologies like machine learning and cyber physical systems become accessible to even …

Complexity In The Classroom Workshop: Teaching And Learning The Cynefin Framework By Applying It To The Classroom, Jennifer Karlin, L. Eric James, Lauren Singlelmann

Integrated Engineering Department Publications

Complex adaptive systems are both an important fundamental principle in systems engineering education and a reality of all engineering education. The Cynefin framework, as created by Snowden and Boone (2007), is a decision-making tool that helps the engineer recognize the type of system within which they are operating and then respond in a manner that is appropriate for the cause-and-effect relationships associated with that system type. The types of system, or the domains, fall into five categories and their liminal spaces: obvious, where the cause-and-effect relationships are clear to everyone involved; complicated, where the cause-and-effect relationships are clear to those …

A Multi-Decade Response To The Call For Change, Bart Johnson, Ron Ulseth, Mike Raich

Integrated Engineering Department Publications

Engineering and society have always been intertwined, especially with the accepted realization of technology's significant and rapidly increasing influence on the evolution of society. As a profession, engineering has a vital role in sustainably meeting needs and exploring opportunities that are ever changing and evolving. As societal and industry needs have evolved, engineering education itself has raised the call several times for evolving the way engineers are educated; however, the recent history of engineering education is, overall, one of missed opportunities. This was brought to a headline recently as ASEE leadership authored an article entitled “Stuck in 1955, Engineering Education …

Working Full Time And Earning An Engineering Degree: Wellbeing In A Co-Op-Based Engineering Program, Catherine Mcgough Spence, Luke Nyberg, Justine Chasmar, Jodi Nelson, Marissa Tsugawa

Integrated Engineering Department Publications

The purpose of this research paper is to describe how stress manifests in undergraduate engineering students who are working in paid engineering positions while completing their upper-division coursework, through the analysis of reflective prompts on wellbeing, and engineering belongingness. Previous research has identified the culture of “suffering and shared hardship” where heavy workloads and stressful situations are expected in engineering programs and engineering as a discipline. Stress, specifically feelings of being overwhelmed with workload, has far reaching implications for an individuals’ wellbeing beyond academic performance.

We focus on the frameworks of self-determination theory, engineering belonging, identity, to better understand undergraduate …

Engineering Stress Culture In Project-Based Engineering Programs, Lin Chase, Catherine Sleezer, Robert Sleezer, Michelle Soledad

Integrated Engineering Department Publications

Background: This research paper examines engineering stress culture in the context of project-based learning engineering programs at the university level. Multiple authors have reported that the culture of engineering and engineering education can be stressful and exclusive. A study conducted by Jensen and Cross [9] found that measures of inclusion such as "Department Caring" and "Department Pride" were negatively correlated with stress, anxiety, and depression. We used the approach developed by Jensen and Cross to examine stress culture in the context of three project-based learning engineering programs.

Purpose: Our goal was to establish a baseline of measures of mental health …

An Integrated Engineering Model For Advising, Rebecca Bates, Catherine Mcgough Spence, Darcie Christensen, Robert Sleezer, Jodi Nelson, Ryan Walerius, Rachael Johnson

Integrated Engineering Department Publications

This evidence-based practice paper describes the theoretical foundations of the supportive advising practices used by the Integrated Engineering Department (IE) at Minnesota State University, Mankato. The driving motivation for the advising model is to support the development of student engineers as whole people. Generally in academia, faculty in traditional professor roles serve as formal advisors, mentors, facilitators, evaluators, and coaches and are joined by full-time staff that serve in roles to support student development. Integrated Engineers at Minnesota State University, Mankato are supported to become the engineer they want to be. This paper describes the unique model employed by IE …

What Do Undergraduate Engineering Students At The Onset Of Emergency Hybrid Learning During Covid-19 Say About Peer Mentorship?, Darcie Christensen, Idalis Villanueva

Integrated Engineering Department Publications

This complete research paper addresses the perceptions of undergraduate engineering students during the onset of the worldwide pandemic (COVID-19) in an engineering college at a western institution of the United States. Specifically, these students were asked about their perceived needs around peer mentorship amidst pivoting between hybrid and in-person learning at the onset of COVID-19.

Mentorship is defined as the interaction between two individuals whose goal is to help one another in psychosocial matters, support personal and professional growth, and provide career guidance. Generally, there are two main types of mentorships recognized: traditional and peer. Traditional mentorship involves a mentor …

Examination Of Ableist Educational Systems And Structures That Limit Access To Engineering Education Through Narratives, Marissa Tsugawa, Brady Webster, Sakshi Solanki, Autumn Cuellar, Catherine Mcgough Spence

Integrated Engineering Department Publications

The purpose of this paper is to examine how higher education systems limit access to engineering education for disabled and neurodivergent engineering students. Throughout this paper we will discuss ableism in higher education systems. Particularly, U.S. institutions and education are designed for non-disabled and neurotypical people rather than with accessibility for all despite legal efforts to improve access to education. We also provide two narratives from the authors that describe their experiences with having a disability and being neurodivergent in engineering education. Finally, we suggest other paradigms and methodologies engineering education researchers can utilize when conducting research on disability and …

Byoe: Making Connections Between Fluid Mechanics And Abstract Painting, Thomas Shepard, Charles Mossey, Jacob Swanson, Colin Huntington, Mary Murphy

Integrated Engineering Department Publications

This bring your own experiment (BYOE) paper details two iterations of a hands-on painting project that has been well-received by fluid mechanics students. In the conception of this project the authors have explored many of the relevant parameters for different painting techniques: drip painting, pendulum painting spray painting, and acrylic pours – one subset of which is spinning pours. These methods were explored both in terms of relevant fluid mechanic phenomenon as well as with hands-on experimentation, reviewing instructional videos and talking with artists. These efforts led to creation of short instructional videos that students can watch before undertaking their …