Engineering Education Commons^™

Teaching Wind Energy To Engineering And Education Undergraduates Through Community Engagement, Maija A. Benitz, Li-Ling Yang

Engineering, Computing & Construction Management Faculty Publications

Rhode Island's adoption of the Next Generation Science Standards in 2013 [1] established a pressing need to provide elementary schools with support for integrating engineering in our local district's classrooms. Wind energy was identified as an appropriate instructional topic, both for its relevance to Rhode Island [2], and for its strength as a tool for studying the engineering design process. Education and engineering undergraduates collaborated to educate local fourth graders about engineering design and wind energy. While supporting the need for engineering education in the community, this project also deepened learning for both education and engineering students at Roger Williams …

Exercises Integrating High School Mathematics With Robot Motion Planning, Ronald I. Greenberg, George K. Thiruvathukal

Computer Science: Faculty Publications and Other Works

This paper presents progress in developing exercises for high school students incorporating level-appropriate mathematics into robotics activities. We assume mathematical foundations ranging from algebra to precalculus, whereas most prior work on integrating mathematics into robotics uses only very elementary mathematical reasoning or, at the other extreme, is comprised of technical papers or books using calculus and other advanced mathematics. The exercises suggested are relevant to any differerential-drive robot, which is an appropriate model for many different varieties of educational robots. They guide students towards comparing a variety of natural navigational strategies making use of typical movement primitives. The exercises align …

Elementary School Student Development Of Stem Attitudes And Perceived Learning In A Stem Integrated Robotics Curriculum, Yu-Hui Ching, Dazhi Yang, Sasha Wang, Youngkyun Baek, Steve Swanson, Bhaskar Chittoori

Educational Technology Faculty Publications and Presentations

Robotics has been advocated as an emerging approach to engaging K-12 students in learning science, technology, engineering, and mathematics (STEM). This study examined the impacts of a project-based STEM integrated robotics curriculum on elementary school students’ attitudes toward STEM and perceived learning in an afterschool setting. Three elementary school teachers and 18 fourth to sixth graders participated in an eight-week-long program. Quantitative and qualitative data were collected and analyzed, and showed students’ attitudes toward math improved significantly at the end of the robotics curriculum. Three specific areas of learning were identified, including STEM content learning and connection, engagement and perseverance, …

Teaching Top-Down Approaches To The Engineering Design Process, Joshua E. Katz, Joshua E. Katz

STAR Program Research Presentations

One of the main focuses of metacognition is to have students think about their learning. By bringing the engineering design process with educational psychology together, it can lead to a society that thinks more in-depth on various topics. The goal of the internship was to utilize and teach top-down educational and instructional objectives. Throughout the project, we followed a modified progression of the System Architecture Methodology to help other interns think in a top-down fashion. The purpose of this procedure is to create and induce new innovative and creative ideas for different projects. As teaching this methodology was tasked, research …

Iron Range Engineering - An Overview Of Design And Open-Ended Problem Solving Activities In An Interdisciplinary, Project-Based Learning Program, Elizabeth Pluskwik

Integrated Engineering Department Publications

Project-based learning (PBL) in engineering education is growing at a rapid pace. The Iron Range Engineering (IRE) Program of Minnesota State University Mankato, is an upper division (3rd and 4th year) undergraduate engineering education program based on the Aalborg, Denmark PBL model. Students work in teams to solve industry-sourced projects each semester. The learning of engineering is accomplished in three domains - technical learning of engineering concepts, professionalism, and design, which we call the “three-legged stool” of engineering education. The program promotes entrepreneurial mindset and innovative open-ended problem-solving in context. Fifty students are enrolled in 3rd and 4th-year studies at …

Engineering Students’ Perceptions Of Belongingness In Civil Engineering, Lisa Benson, Candice Bolding, Jennifer Harper Ogle, Catherine Mcgough Spence, Joseph Murphy, Rachel Lanning

Integrated Engineering Department Publications

Prior research shows that engineering students with low feelings of belongingness tend to switch to non-technical majors. With the understanding that aspects of student motivation, identity, and personality, as well as their academic performance, affect their sense of community in engineering, this study seeks to assess these student attributes over time. The context for this study is a single civil engineering program that is undergoing both curricular and cultural changes as part of an NSF-funded project. The data and findings presented here are part of a larger study of how student attitudes and beliefs change during their experiences in a …

Using Reflection To Facilitate Writing Knowledge Transfer In Upper-Level Materials Science Courses, Jennifer C. Mallette, Harold Ackler

English Literature Faculty Publications and Presentations

When students enter upper-level engineering courses, they may bring with them unclear or inconsistent approaches to writing in engineering. Influenced by their past experiences with writing, students encountering engineering genres such as reports and proposals may struggle to write successfully. They may struggle in part because of the messiness inherent in writing knowledge transfer: a student who successfully completed freshman composition may still be unable to transfer skills, habits of mind, and approaches to writing from that setting to engineering because the rhetorical situations look drastically different. Yancey, Robertson, and Taczak define transfer as a “dynamic rather than a static …

Voices Of Our Students: Using Evidence-Based Methods To Inform A Multidisciplinary Engineering Program Design, Vicki Stieha, Noah Salzman, Amy J. Moll

Materials Science and Engineering Faculty Publications and Presentations

Listening carefully to our students and integrating the variables that matter to them is a step that we can take to increase the number of women and underrepresented minority graduates in engineering. This paper shares an evaluative case study as we report findings from data gathering tools guiding our continuous improvement process. The findings illuminate students’ perceptions of their engineering design course and curriculum. We conclude by discussing the pedagogical decisions the teaching team is making as a result of listening to our students’ voices.

”Cyberworld” As A Theme For A University-Wide First-Year Common Course, Kristen Przyborski, Frank Breitinger, Lauren Beck, Ronald S. Harichandran

Engineering and Applied Science Education Faculty Publications

Nowadays we all live in a cyber world and use the internet for emailing, banking, streaming video, shopping, reading news, or other activities. Given all the time people spend online, it is important that all students (regardless of their major) learn some basics about living in a cyber world, e.g., strategies for online safety, impact of artificial intelligence, digital forensics or ancestry.com. To facilitate students from many majors to learn about important issues related to the internet, eight faculty from a variety of disciplines at the University of New Haven integrated the theme of Cyber World into our team-taught, first-year …

An Exploratory Study Of Engineering Students’ Misconceptions About Technical Communication, Cheryl Q. Li, Judy Randi, Jenna Sheffield

Engineering and Applied Science Education Faculty Publications

This paper reports results of a mixed methods study that examined engineering students’ acquisition of technical communication skills over time. In particular, this exploratory study aimed to identify persistent errors, lingering misconceptions, and challenges engineering students faced when they attempted to apply their knowledge and skills in new contexts. The 12 participants were drawn from engineering courses in which students were required to compose technical memoranda in response to requests for information from supervisors or clients. This integrated approach addresses content and communication in the same course. The study included a longitudinal analysis of four technical memoranda written across two …

Motivating Students For Learning Using Scaffolding And A Variety Of Assignments, Nadiye O. Erdil

Engineering and Applied Science Education Faculty Publications

This paper discusses the impacts of various course assignments and activities that were used to increase student motivation and learning. The courses selected for the study are Quality Analysis and Design of Experiments courses, which are offered as required courses in the industrial engineering graduate program at the University of New Haven. The assignments and activities include term project, term paper, homework, in-class exercises, quizzes, exams, library training and factory visit. In an earlier pilot study in the Quality Analysis course, scaffolding -an instructional strategy that enables students to build on prior experience and knowledge as they work towards mastering …

Teaching Introduction To Welding In Undergraduate And Graduate Engineering Technology Programs, Hamid Eisazadeh, Milan Rakita, Mona Torabizadeh, Vukica Jovanovic

Engineering Technology Faculty Publications

Recent trends in the industry have led to an increased need for engineers with welding training. Not many universities in the U.S.A. offer welding courses at undergraduate level. Engineers that do not receive education about this complex process, sometimes they make a very costly and dangerous mistake. More profound understanding of the welding process that expands beyond the basic comprehension of technology use is needed for the advanced manufacturing sector. Welding related courses, as it involves the complex interplay of the four states of matter (solid, liquid, gas and plasma) as governed by the laws of physics, need topics such …

Impact Of Bioinspired Robots On Veterans Pursuing Stem Degrees, Otilia Popescu, Vukica M. Jovanovic, Krishnanand Kaipa, Karina Arcaute, Anthony W. Dean

Engineering Technology Faculty Publications

The gap in the area of advanced manufacturing skilled workforce and the efforts in guiding veterans towards STEM careers are merged in the NSF funded project presented in this paper. While most of the products and STEM educational programs focused on a maker concept that are currently available are specifically designed for young population, at various K-12 grade levels, to increase their interest in STEM and engineering careers in particular, there is a limited availability of such programs to address adult population. The study presented in this paper focuses on developing and implementing a series of workshops for veterans, using …

On The Road To Flipping, Raji Lukkoor

Faculty Publications

The poster presentation will address the following topics: experience taking the Flip Workshop, How the instructor went from a “no” to a “yes” on considering implementing the flip, the frenzied list of activities that helped set up the framework for a mini-flip in approximately a week’s time, the actual development of content in under 4 weeks, and the role played by my support network.

The Relationship Between Engineering Identity And Belongingness On Certainty Of Majoring In Engineering For First-Generation College Students, Dina Verdín, Allison Godwin

School of Engineering Education Graduate Student Series

This paper seeks to understand the factors that support first-generation college students’ certainty of majoring in engineering. Data used in this study came from thirty-two four-year ABET- accredited institutions across the United States which has a total sample of 790 first-generation college students. We used the frameworks of engineering role identity and sense of belonging to understand the factors that influence first-generation college students’ certainty of majoring in engineering. Certainty is referred to as the degree of confidence or decisiveness an individual has with regard to their chosen occupational plans. First, we examine how first-generation college students’ engineering role identity …

Finding The Balance: A Technical Writing Assignment During A Co-Op Work Experience, Lindsay Corneal, Debbie Morrow

Presentations

The mandatory three semester co-op work experience in the engineering programs at Grand Valley State University allows students to apply their education to real engineering situations. As part of the regular assessment of the co-op work experiences, site visits are held between faculty, students, and the employers. It has very often been noted by employer supervisors that students perform well technically but still lack polish communicating in a professional setting. To address this, a project was launched to incorporate online writing instruction as academic content associated with the Co-op II semester, with a technical proposal writing assignment as the major …

Review Of Educational Technology: Closing The Gap Between Modern Technology And The College Engineering Classroom, David Pinkerton, Krishna Pakala

Mechanical and Biomedical Engineering Faculty Publications and Presentations

This paper aggregates information from past and current studies regarding the implementation of technology in engineering classrooms and identifies the most promising ideas, technologies, and techniques. This paper provides insight into best practices for implementing technologies to improve the education of engineering students. This paper provides recommendations to adopt non-traditional teaching methods. Educational tools and techniques are evaluated on the basis of: Adoption and Assimilation, Access, Community, Intellectual Presence, Student Perception, and Development of Social and Professional Skills. Best practices are highlighted with descriptions of the technologies and techniques that were found most promising.

5th/6th Graders And Preservice Teachers Explore Engineering And Coding In A Combined After-School Technology Club/Educational Technology Course, Jennifer Kidd, Sam Sacks, Krishnanand Kaipa, Kelly Rippard

Teaching & Learning Faculty Publications

Elementary schools are increasingly encouraged to adopt STEM education efforts that include engineering and programming, yet pre-service teachers (PSTs) are not traditionally prepared to teach these subjects. This pilot study describes an innovative preparation experience designed to help PSTs gain experience and confidence in these areas. As part of an undergraduate educational technology course, PSTs led an after-school technology club at a local public school. PSTs enrolled in the course worked alongside fifth and sixth grade students on a series of collaborative design challenges that culminated in the creation of animal-inspired robots. The “WoW Club”, as it came to be …

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Integrated Engineering Department Publications

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Reports

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Board 51: An Initial Step Towards Measuring First-Generation College Students’ Personal Agency: A Scale Validation, Dina Verdín, Allison Godwin

School of Engineering Education Graduate Student Series

This research paper describes the development of a scale to measure how first-generation college students use engineering as a tool for making a difference in their community and world or personal agency. Personal agency is a capability that every individual holds; it is described by Bandura as an individual’s beliefs about their capabilities to exercise control over events that affect their lives through purposeful and reflective actions. Agentic actions allow students to explore, maneuver and impact their environment for the achievement of a goal or set of goals. This study identifies how cognitive processes of forethought, intention, reactivity, and reflection …

Eager: Broadening Participation Of First-Generation College Student, Jessica M. Smith, Dina Verdín, Juan C. Lucena

School of Engineering Education Graduate Student Series

No abstract provided.

Graduate School Of Engineering And Management Catalog 2019-2020, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Recognizing Engineering Students’ Funds Of Knowledge: Creating And Validating Survey Measures, Dina Verdín, Jessica M. Smith, Juan Lucena

School of Engineering Education Graduate Student Series

This research base paper examines students who are the first in their families to attend college. Our research seeks to understand the role students’ funds of knowledge makes in first-generation college students’ undergraduate experience. Funds of knowledge are the set of formal/informal knowledge and skills that students learn through family, friends, and communities outside of academic institutions. This paper reports funds of knowledge themes relevant to first-generation college students in engineering and the process of gathering validity evidence to support the funds of knowledge themes.

Using ethnographic and interview data, six themes emerged: connecting experiences, community networks, tinkering knowledge, perspective …

Exploring Engineering Club, Samantha Corey, Stephen Yaghmour

Honors Expanded Learning Clubs

Exploring Engineering Club provides an introduction to a variety of engineering problems and piques the students’ interest in engineering by accompanying the information with hands-on problem solving activities mainly related to structural engineering. The activities will often be done in teams which will teach good teamwork skills, as well as problem solving and critical thinking.

Continued Efforts In Ti Arm M4 Microcontroller Curricula Developments And Assessments Between Three Different Institutions And Programs, Steve C. Hsiung, Lijian Xu, Feng Jao, Yonghui Wang, Suxia Cui

Engineering Technology Faculty Publications

This project is a continuation in efforts to upgrade the curricula in microcontroller related courses that are facing difficulties in the disappearing and lack technical supports in hardware and software of 68XXX and 80XXX microcontrollers. Through the study of a NSF supported project "Transform the Innovated Design and Development of an Embedded Design Training System and Associated Support Curricula into a Commercial Available Product" that interviewed 130 faculty/teachers/students across the U.S. has revealed on finding newly available microcontrollers is an urgent issue in the academic communities. Based on the supports on hardware and software and function libraries, the TI ARM …

Doctoral Engineering Grant Writing Experience To Prepare Future Professionals And Faculty, Katherine Smith, Nathapon Siangchokyoo, Erika Gamarra, Ashish Tamhane, Anthony W. Dean

Engineering Technology Faculty Publications

While there have been many efforts to broaden opportunities for all STEM students by engaging in interdisciplinary endeavors and education focusing on professional development, there are particular problems facing students pursuing doctoral degrees in engineering disciplines. Doctoral programs of the future need to become better equipped to prepare students for future careers as engineering professionals or faculty. It has been noted recently that many doctoral degree recipients are turning to jobs outside of academia but increases in undergraduate enrollment and the average age of the professoriate indicate an increase in demand for new faculty. Both future faculty and professionals can …

Instilling An Entrepreneurial Mindset In A New Generation Of First-Year Engineering Students Through A Graphics Course Project, Lulu Sun, Leroy Long Iii

Publications

Each year, an increasing number of engineering start-up companies emerge in the U.S. and around the world. Innovation and entrepreneurship have never been so pronounced, especially in science, technology, engineering, and mathematics (STEM) fields. How can we train engineering students to be more entrepreneurially-minded so they are well-equipped to become global innovators? Engineering educators can use entrepreneurially-minded learning activities to help students develop an entrepreneurial mindset, which is a set of beliefs, attitudes, and behaviors. At a mid-sized Southeastern private institution, we used an open-ended team project and an end-of-semester poster competition within a freshman-level engineering graphics course to encourage …

Improving Stem Recruitment Through A Theme-Based Summer Residential Camp Focused On Sea Level Rise, Vukica M. Jovanović, Balša Terzić, Mujde Erten-Unal, Victoria Hill, George Mcleod, Michelle Covi, David Burdige, Jenifer Alonzo, Justin Mason, Tysha Batts, Cynthia Tomovic

Engineering Technology Faculty Publications

In this paper, the authors present an enrichment program that focuses on Science, Technology, Engineering, and Math (STEM) concepts. The program is named Building Leaders to Advance Science and Technology (BLAST) and is held each summer at three universities across the Commonwealth of Virginia: Old Dominion University, the University of Virginia, and the Virginia Polytechnic Institute. BLAST is sponsored in partnership among these three universities and the Virginia Space Grant Consortium (VSGC), and is funded by the General Assembly of Commonwealth of Virginia. Its main purpose is to expose high school students to topics related to different STEM fields through …

The Legacy Project: Rodney L. Custer, Dte, Rodney L. Custer Dte, Johnny J. Moye Dte

STEMPS Faculty Publications

An interview with vice president of Dept. of Technical Education, Rodney Custer is presented. Topics discussed include interest in technology and engineering education; academic qualification; and experience as university department chair administrator and working with the Center for Math, Science, and Technology (CeMast).