Open Access. Powered by Scholars. Published by Universities.®
Electrical and Computer Engineering Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Cyclic voltammetry (5)
- Carbon nanotubes (4)
- Electrocatalysis (3)
- Electrochemical performance (3)
- LiFePO4 (3)
-
- Lithium ion battery (3)
- Modified electrode (3)
- Oxygen reduction (3)
- Platinum (3)
- Au (2)
- Carbon paste electrode (2)
- Cathode material (2)
- Direct electrochemistry (2)
- Glassy carbon electrode (2)
- Oxide anode coatings (2)
- Redox flow battery (2)
- Supercapacitor (2)
- 2 (1)
- 2′-Dichlorohydrazobenzene (1)
- AC impedance (1)
- Activated carbon (1)
- Activation (1)
- Activation condition (1)
- Adipic acid (1)
- AgV3O8 (1)
- Air breathing (1)
- Aligned carbon nanotubes (1)
- Alloying (1)
- Aluminum oxide (1)
- Ambient humidity (1)
Articles 1 - 30 of 48
Full-Text Articles in Electrical and Computer Engineering
Preparations Of Composite Electrodes Of Pt With H_Xwo_3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li
Preparations Of Composite Electrodes Of Pt With H_Xwo_3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li
Journal of Electrochemistry
Three composite electrodes of platinum with hydrogen tungsten bronze(HxWO3)were prepared by voltammetry: hydrogen tungsten bronze deposited on platinum(HxWO3/Pt);platinum deposited on hydrogen tungsten bronze(Pt/HxWO3) and codeposited platinum and hydrogen tungsten bronze(Pt-HxWO3).The eletro-catalytic activities of three electrodes toward oxygen reduction reaction were studied.It is found that the catalytic activity of platinum can be improved by introducing with hydrogen tungsten bronze.Among these composite electrodes Pt/HxWO3,and the electrode shows the best eletro-catalytic activity toward oxygen reduction reaction,hence,provides a new way for reducing loading of noble metal in the application for fuel cell.
Synthesis Of The Lifepo_4 By Co Reduction:Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang
Synthesis Of The Lifepo_4 By Co Reduction:Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang
Journal of Electrochemistry
LiFePO4 cathode material was synthesized by CO reducing FePO4 and LiOH precursors.The structure,morphology and electrochemical performances of such LiFePO4 material were characterized by XRD,SEM and charge-discharge tests.It was shown that the particle size of the LiFePO4 synthesized with 5% excess of LiOH in the precursor was about 200 nm.By carbon coating,the LiFePO4 electrode was able to deliver a reversible capacity of 158 mAh·g-1 at 0.1C discharge rate.Temperature-programmed X-ray diffraction was employed to monitor the reaction during the formation of LiFePO4,and Li3Fe2(PO4)3 was found to be an intermediate by analyzing the time-resolved XRD patterns.Kinetic study indicates that nucleation and their growth …
Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu
Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu
Journal of Electrochemistry
A highly-sensitive and mercury-free method of determining iodate ion in table salt was established based on carboxylic carbon nanotubes modified carbon paste electrode.In 0.1 mol/L NaOH solution,there was a sensitive cathodic stripping peak on voltammograms.The stripping peak potential was-0.52 V when accumulation time of IO-3 at the modified electrode was 60 s and the potential scan rate was 300 mV/s.There was a good liner relationship between the peak current and IO-3 concentration in the range of 8.0×10-10 ～ 5.0×10-8 mol/L and 1.0×10-7 ～ 3.0×10-6 mol/L with the correlation coefficient of 0.999 and 0.998,respectively.The detection limit was 1.0 × 10-11 mol/L.This …
Electrochemical Behavior And Determination Of Paracetamol On Activated Glassy Carbon Electrode, Bao-Yu Tan, Fang Liao, Xiao-Ying He, Qing-Tao Zhu, Jun Hua, Xiao-Li Jiang
Electrochemical Behavior And Determination Of Paracetamol On Activated Glassy Carbon Electrode, Bao-Yu Tan, Fang Liao, Xiao-Ying He, Qing-Tao Zhu, Jun Hua, Xiao-Li Jiang
Journal of Electrochemistry
The electrochemical behavior of paracetamol(PCT) was studied at glassy carbon electrode activated by cyclic voltammetry.In HAc-NaAc buffer solution(pH=4.00),a couple of sensitive redox peaks were recorded about 0.54 V in the cyclic voltammograms.The result indicated that the process was controlled by adsorption and nearly reversible.The reaction electron and proton numbers were estimated,respectively,to be two.Excllent linearity was observed in the correlation between the oxidation peak current and the concentration of PCT in the range of 8.00×10-6～2.00×10-4 mol·L-1.The correlative coefficient was-0.999 18.The detection limit was 6.34×10-6 mol·L-1.This method can be used for the determination of PCT real samples.
Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu
Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu
Journal of Electrochemistry
Hydrophilic aluminum oxide is popularly used for heat exchanger of air-condition.Herein,we developed a simple method to prepare superhydrophilic aluminum oxide on the surface of aluminum through single-step electrochemical oxidization.The morphologies and water contact angles on surfaces of alumina fabricated under different electrochemical conditions were investgated.Superhydrophilic surfaces fabricated by this method have good stability and high mechanical strength with water contact angle almost 0°.Coated with low surface energy materials,superhydrophilc alumina will be converted to superhydrophobic.
Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang
Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang
Journal of Electrochemistry
A modified electrode has been constructed by depositing a novel copper(Ⅱ) complex 2biPy(ClO4)4 on the glassy carbon electrode through the method of cyclic voltammetry(CV).It was found that the modified electrode exhibited high electrocatalytic activity toward L-Cysteine oxidation with good reproducibility and high sensitivity.The peak current of semi-derivative linear scan was proportional to the concentration of L-cys in the range of 1×10-6～3×10-4 mol·L-1.The detection limit was 5×10-7 mol·L-1.
Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie
Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie
Journal of Electrochemistry
Effects of solution pH on the electrochemical behavior of tiron(sodium 4,5-dihydroxy-1,3-benzendisulfonic) couple(on a graphite electrode) were studied by cyclic voltammetry in aqueous solutions.It is shown that at pH<4,tiron exhibited a redox process at a relatively high potential with a good reversibility.A redox flow battery was formed employing tiron as the positive active species and V(III)/V(II) as the negative redox couple.In sulfuric acid medium,the coulombic efficiency of the tiron-V redox flow cell was more than 90% with a good cycle life.The decay in the cycle performance was minimal.Therefore,the feasibility of tiron as active materials for redox flow battery application is demonstrated.
The Hydrothermal Synthesis Of Nanoscale Lifepo_4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong
The Hydrothermal Synthesis Of Nanoscale Lifepo_4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong
Journal of Electrochemistry
The cathode materials of nanosiged LiFePO4 were prepared by hydrothermal templating synthesis.The grain sizes and electrochemical performance of LiFePO4 were controlled by surfactant.It was shown that the grain sizes varied from less than a hundred to hundreds nanometers by the SEM images.In the charge/discharge tests,the discharge capacities of the sample as a lithium ion battery were achieved to 150 mAh/g at 0.1C,140 mAh/g at 1C,and 126 mAh/g at 2C,with good cycling performance.
Combustion Product Characterization Of The Iron-Heated Powders In Thermal Batteries, Jin Chong, Xue-Ping Gao, Ji-Qiang Wang
Combustion Product Characterization Of The Iron-Heated Powders In Thermal Batteries, Jin Chong, Xue-Ping Gao, Ji-Qiang Wang
Journal of Electrochemistry
The combustion products of thermal battery used iron-heated powders have been studied.It is identified by X-ray diffraction(XRD) analysis that the main compositions of the combustion products are Fe、FeO and KCl.The transmission electron microscopy(TEM) shows a typical core-shell structure with un-reacted Fe particle core coated by FeO shell with a shell thickness of around 200 nm.The combusted iron-heated powders exhibit no metal property,which is contrast to previous assumption.Further measurement indicates that at the ambient temperature the combustion products show semiconductor property of the p-type with conductivity in the order of 103 S·cm-1,which is five order lower than that of the iron …
Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang
Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang
Journal of Electrochemistry
The Ir/C catalyst with 30%(by mass) Ir was prepared in the CH3CH2OH and H2O binary system.The X-ray diffraction(XRD) data showed that the average sizes of the Ir particles in the Ir/C catalyst was about 2.2 nm.The results of the electrochemical measurements indicated that the electrocatalytic activity of the Ir/C catalyst for the ammonia oxidation in the neutral NaClO4 solution was similar to the Ir catalyst,while electrocatalytic stability was much better than that of the Ir catalyst.Furthermore,the peak current density of the ammonia oxidation at the Ir/C catalyst electrode showed a good linear relationship with the ammonia concentration,illustrating that the Ir/C …
Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li
Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li
Journal of Electrochemistry
The chloroperoxidase(CPO) was immobilized onto the surface of SWNTs modified electrodes.The electrochemical behaviors of modified electrode have been investigated by cyclic voltammetry.The appearance of a pair of well-defined redox peaks in the CV curve indicated that SWNTs can promote the electron transfer reaction of CPO.The results of cyclic voltammetry in PBS of different pH,from 3~9,showed that the reaction of CPO on the modified electrode was with equal numbers of electron and protein.This readily prepared SWNTs modified electrode showed excellent stability and good catalysis to O2.
High Performance Fuel Cell Catalyst And 5kw Pemfc Stack Without Humidification At Room Temperature And Atmosphere, Xin-Fa Hu, Min Chen, Shi-Jun Liao
High Performance Fuel Cell Catalyst And 5kw Pemfc Stack Without Humidification At Room Temperature And Atmosphere, Xin-Fa Hu, Min Chen, Shi-Jun Liao
Journal of Electrochemistry
The Pt/C catalyst with high dispersion and high performance was prepared successfully by an organic colloidal method and small batch production(10g) of Pt/C catalyst has been realized.The particle sizes of the active components in the catalyst could be as small as 2.8 nm and the active surface area was up to 450 m2/g.A high performance membrane-electrode assembly(MEA) with surface area of 275 cm2 has been prepared by using the home-made catalyst with a catalyst coated membrane method invented in the lab,and a 5 kW stack has been assembled.The stack showed working 10 h at room temperature,atmosphere and without humidification.
Ec-Pt/Cnts Glucose Oxidative Electrode, Jia-Hua Liang, Chun-Mei Zhou, Hong-Juan Wang
Ec-Pt/Cnts Glucose Oxidative Electrode, Jia-Hua Liang, Chun-Mei Zhou, Hong-Juan Wang
Journal of Electrochemistry
A glucose oxidative electrode(GOD),EC-Pt/CNTs glucose oxidative electrode,was constructed by ethyl cellulose(EC) and Pt/CNTs.The sensitivity of the EC-Pt/CNTs GOD is 0.85 μA/mM in the concentration range of 0～4 mmol/L of glucose.After dipped in PBS(4℃) for 18 days,the activity of the EC-Pt/CNTs GOD can reach 80%.It is promising for the EC-Pt/CNTs GOD to be used to construct glucose biosensor.
Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu
Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu
Journal of Electrochemistry
In this paper,it is reported for the first time that the electrocatalytic activities of the carbon supported Au(Au/C),carbon supported Ir(Ir/C) and the carbon supported Au-Ir(Au-Ir/C) catalysts prepared in the aqueous solution with tetrahydrofuran(THF) for the oxidation of formic acid and for the oxygen reduction were compared.It was found that all three catalysts showed no electrocatalytic activity for the oxidation of formic acid,but the electrocatalytic activity of the Au-Ir/C catalyst for oxygen reduction was much better than those of Au/C and Ir/C.Thus,the Au-Ir/C catalyst is suitable to be used as the cathodic catalyst in Direct formic acid fuel cell(DFAFC).
Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding
Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding
Journal of Electrochemistry
The nanoporous gold(NPG) electrodes with uniform pore sizes and ligaments were prepared by using a simple dealloying method.The as-prepared NPG showed high catalytic activity towards the oxidation of formic acid and formaldehyde.After tiny amount of platinum was deposited onto the NPG substrate,not only the structure stability of NPG was greatly improved,but also the Pt-Au bimetallic catalysts displayed the better catalytic activity and the stronger poison resistance towards the electrooxidation of small organic molecules than the bulk platinum due to synergistic effect between Au and Pt compositions.
Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li
Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li
Journal of Electrochemistry
The multi-wall carbon nanotubes(MWNT) were dispersed successfully into water in the presence of dihexadecyl hydrogen phosphate(DHP) and a stable well-distributed suspension.A was formed sensor based on the multi-carbon nanotubes film coated glassy carbon electrode was developed.The electrochemical response of salbutamol was studied by square wave voltammetry.The oxidation peak potential of salbutamol at the modified electrode was observed at 0.604 V,which shifted about 40 mV negatively.The peak current increased 4.5 folds,in contrast to that at a bare electrode.Under optimal measurement conditions,there was a good linear relationship between the peak current(Ipa) and salbutamol concentration(C) in the range from 8.3 × 1 0-7~ …
A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao
A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao
Journal of Electrochemistry
The Pd-Ir/Ni electrodes were prepared by electrodeposition of Pd and Ir on the porous nickel foam surface.The structure,composition and state of the Pd-Ir catalyst were analyzed using SEM and XPS.The catalytic performance of Pd-Ir/Ni for H2O2 electroveduction at different concentrations of H2O2 were investigated.A limiting current density of 318 mA/cm2 was obtained with 0.4 mol/L H2O2.The aluminum-hydrogen peroxide semi-fuel cells using different aluminum alloys as anode and Pd-Ir/Ni as cathode were assembled and tested.It was found that the fuel cell with aluminum-manganese alloy anode demonstrated a maximum power density of 198mW/cm2 at 234mA/cm2.
Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang
Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang
Journal of Electrochemistry
A gold nano-particles modified glassy carbon electrode(GNP/GCE) was prepared by the"seed-mediated gold nano-particles growth method".Field emission scanning electron microscopy,ultraviolet-visible(UV-vis) spectroscopy analysis and electroalaylsis were employed to study the morphology and electrochemical performances.The resulting electrode showed excellent electro-catalytic activity toward the oxidation of salicylic acid and the response sensitivity was 1.8 fold than that obtained on GCE.Good linear relationship was obtained between response current and salicylic acid concentration in the range of 5.0 × 10-7 ~8.0 × 10-5 mol/L,which could be used in the detection of trace salicylic acid.
Electrochemical Synthesis,Characterization And Fluorescence Property Of Nano Na_2sif_6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu
Electrochemical Synthesis,Characterization And Fluorescence Property Of Nano Na_2sif_6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu
Journal of Electrochemistry
The nano TiO2 film was prepared by sol-gel process and characterized with X-ray diffraction(XRD) and scanning electron microscope(SEM).It was found that the average size of pore diameter was about 80 nm for the nano TiO2 film.The Nano Na2SiF6 was synthesized by electrochemical deposition on the nanoporous film electrode and characterized with XRD and transmission electron microscope(TEM).The result showed that the average size of nanoparticle was 20 nm for the nano Na2SiF6.The fluorescence property of nano Na2SiF6 was also studied briefly.The result indicated that the nano Na2SiF6 exhibited strong fluorescence emission at 452.4 nm and 285 nm,respectively.
Preliminary Study Of Single Flow Zinc-Nickel Battery, Li Zhang, Jie Cheng, Yu-Sheng Yang, Yue-Hua Wen, Xin-Dong Wang, Zi-Li Xie
Preliminary Study Of Single Flow Zinc-Nickel Battery, Li Zhang, Jie Cheng, Yu-Sheng Yang, Yue-Hua Wen, Xin-Dong Wang, Zi-Li Xie
Journal of Electrochemistry
The micromorphology of zinc electrodeposited at different currents in the flowing electrolyte was studied.It has been shown that the structure of the zinc became compacted with the increase of the charge current density and no zinc dendrite was presenct.A cell with 2Ah capacity was assembled and the charge-discharge test was performed.The results showed that the average charge voltage was 1.84V and the average discharge voltage was 1.65V.The high efficiencies can be achieved with an average coulombic efficiency of 97% and energy efficiency of 86% over 1000 cycles.
The Effect Of Ru∶Sn On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Wen-Bin Liu, Li-Kun Xu, Gui-Lin Xue
The Effect Of Ru∶Sn On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Wen-Bin Liu, Li-Kun Xu, Gui-Lin Xue
Journal of Electrochemistry
The anode coatings of Ru-Ir-Sn oxide with different Ru/Sn ratios were prepared by sol-gel method.The influences of Ru/Sn ratio on properties of anode coatings were studied by scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD).The potential of chlorine evolution,current efficiency,accelerated life,cyclic vohammetry and electrochemical impedance spectroscopy(EIS) tests were carried out.The results showed that there was an obvious effect of Ru/Sn ratio on the morphology of the coatings.The cyclic voltammogram,double layer capacitances and accelerated life of anode coatings had a tendency to fall down firstly then increased as the Ru% increased,the current effency and potential of chlorine evolution had a tendency to …
Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang
Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang
Journal of Electrochemistry
This paper presented a method of hydrogen generation from sodium borohydride solution for fuel cells.The Ru-Ni foam catalyst which was prepared by chemical plating showed strong activity and stability.The pretreatment of Ni foam before chemical plating was very important for the catalyst's strong activity and stability.This easy-to-prepared catalyst exhibited a good activity after being used several times.The effects of NaBH4 concentration,temperature and used times on the hydrogen generation rate were investigated.The results showed that the rate was remarkablely increased with the temperature rising and the rate increased more than ten times when the temperature of reaction rised from 15 ℃ …
Electricity Generation In Microbial Fuel Cells Catalyzed By Mixed Culture And Pure Culture, Chen-Dong Shuang, En-Ren Zhang, Guo-Wang Diao, Fang-Fang Fan, Jie Yuan
Electricity Generation In Microbial Fuel Cells Catalyzed By Mixed Culture And Pure Culture, Chen-Dong Shuang, En-Ren Zhang, Guo-Wang Diao, Fang-Fang Fan, Jie Yuan
Journal of Electrochemistry
Microbial fuel cells(MFCs) were constructed by inoculating fresh sedimentary microorganisms.Effect of phenol on performance of MFCs was investigated.The results showed that the generation of electrical current was induced by bacteria attached on the surface of the anode.Presence of phenol reduced the rate of glucose consumption and extended the duration of electricity generation with the same addition of glucose.In addition,the electricity generation by a single strain(belonging to pseudomonas species) separated from the sedimentary MFC was also investigated.The experimental results indicated that the presence of metabolic intermediates which exhibited electrochemical activity was necessary for the electricity production.Analysis of GC-MS showed that the …
Performance Of Air Breathing Direct Methanol Fuel Cell Under Ambient Condition, Jian-Guo Liu, Jun Gu, Tao Yu, Zhi-Gang Zou, T.S Zhao
Performance Of Air Breathing Direct Methanol Fuel Cell Under Ambient Condition, Jian-Guo Liu, Jun Gu, Tao Yu, Zhi-Gang Zou, T.S Zhao
Journal of Electrochemistry
The performance of the passive DMFC was systematically investigated under an ambient condition by simulating a wide range of temperature and humidity in a high-quality environmentally controlled room.The results indicated that the performance of the passive DMFC was nearly independent of ambient humidity from 30% to 90% RH and water produced in the cathode was expelled mostly from the cell in a liquid state.Compared with the humidity,the ambient temperature has a significant effect on the performance of the passive DMFC.The power density of 30 mW·cm-2 were obtained at 40℃,while only 10 mW·cm-2 at 10 ℃.
Preparation And Electrochemical Capacitance Of Spherical-Like Polypyrrole Doped With Heparin Sodium, Hong-Yu Mi, Xiao-Gang Zhang, Su-Dong Yang, Xiang-Guo Ye
Preparation And Electrochemical Capacitance Of Spherical-Like Polypyrrole Doped With Heparin Sodium, Hong-Yu Mi, Xiao-Gang Zhang, Su-Dong Yang, Xiang-Guo Ye
Journal of Electrochemistry
Spherical-like polypyrrole with an average diameter of 100 nm as the electrode material for supercapacitor was prepared by a self-assembly process with heparin sodium salt as the dopant at-10 ℃.The morphology and electrochemical properties were characterized by transmission electron microscopy(TEM),cyclic voltammetry(CV),galvanostatic charge/discharge and electrochemical impedance spectroscopy(EIS) measurements.The results showed that the polypyrrole doped with heparin sodium salt exhibited good capacitive behavior.The specific capacitance of single electrode was up to 338 F/g at 3 mA/cm2.
Electrocatalytic Performance Of Pt/C And Pt/Wo_3/C Catalysts For Methanol Oxidation, Yuan-Yuan Chu, Bing Wu, Ya-Wen Tang, Tian-Hong Lu, Ying Gao
Electrocatalytic Performance Of Pt/C And Pt/Wo_3/C Catalysts For Methanol Oxidation, Yuan-Yuan Chu, Bing Wu, Ya-Wen Tang, Tian-Hong Lu, Ying Gao
Journal of Electrochemistry
The catalysts of Carbon supported Pt(Pt/C) and carbon supported Pt/WO3(Pt/WO3/C) were prepared with liquid phase reduction method.It was found that the catalytic activity and stability of the Pt/WO3/C catalysts were increased with the addition of WO3.When the atomic ratio of Pt and W was 1∶1,the best electrocatalytic performance of the Pt/WO3/C catalyst for the methanol oxidation was obtained.This is attributed to the larger electrochemical surface area of Pt/WO3/C and the weeker adsorption of CO towards the catalyst.
Electrochemical Performances Of Copper/Activated Carbon Composites, Lan-Ting Li, Qiang Xie, Wen Yan, Yan-Yan Wang, Wen-Wen Xing
Electrochemical Performances Of Copper/Activated Carbon Composites, Lan-Ting Li, Qiang Xie, Wen Yan, Yan-Yan Wang, Wen-Wen Xing
Journal of Electrochemistry
The development and improvement of electrode materials can result in the enhancement of the performances of electrochemical capacitor.In this paper various copper/activated carbon composites were prepared in the presence of different amounts(from 0% to 40%) of copper nitrate from bituminous coal.Then different electrodes were prepared from copper oxide,activated carbon and copper/activated carbon composites,respectively,and were characterized by cyclic voltammetry,alternative current(AC) impedance,charge-discharge at constant current and maintenance of the self-potential.The results showed that the proper amount of copper in copper/activated carbon composites positively influenced the electrochemical performances of electrodes,and the capacitance of copper/activated carbon composites was larger than that of the total …
Synthesis Of Agv_3o_8 As High-Capacity Of Cathode Materials For Lithium Secondary Batteries Via A Soft Chemistry Technique, Xiao-Yu Cao, Tao Li, Ling-Ling Xie, Xiang-Yang Yan, Chi-Wei Wang
Synthesis Of Agv_3o_8 As High-Capacity Of Cathode Materials For Lithium Secondary Batteries Via A Soft Chemistry Technique, Xiao-Yu Cao, Tao Li, Ling-Ling Xie, Xiang-Yang Yan, Chi-Wei Wang
Journal of Electrochemistry
The layered cathode material of AgV3O8 has been prepared for the lithium secondary batteries via the soft chemistry technique. The so-synthesized powders were characterized by XRD(powder X-ray diffraction),SEM(scanning electron microscope) and LPSA(laser particle size analysis).The electrochemical property was investigated by the galvanostatic discharge-charge technique.The results indicated that the particale sizes of AgV3O8 prepared were small in the distribution of narrow range,which leads to high discharge capacity.Among them,the material synthesized at 400 ℃ displayed the first discharge capacity of 760.5 mAh/g.
The Effect Of Annealed Temperature On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Li-Kun Xu, Wen-Bin Liu, Gui-Lin Xue
The Effect Of Annealed Temperature On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Li-Kun Xu, Wen-Bin Liu, Gui-Lin Xue
Journal of Electrochemistry
The anode coatings of Ru-Ir-Sn oxide were prepared by sol-gel method with different annealed temperatures.The influences of annealed temperature in properties of anode coatings were characterized by scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD),potential of chlorine evolution,accelerated life,cyclic voltammetry and electrochemical impedance spectroscopy(EIS) tests.The results showed that the annealed temperature affected the morphology of coatings,while the electric quantities of cyclic voltammetry and double layer capacitances of anode coatings had a tendency to fall down and the potential of chlorine evolution and accelerated life had a tendency to increase as the annealed temperature increased.
Preparation And Photoelectrochemical Properties Of Fe-Doped Tio_2 Nanotube Arrays, Jing Li, Lan Sun, Hui-Fang Zhuang, Cheng-Lin Wang, Rong-Gui Du, Chang-Jian Lin
Preparation And Photoelectrochemical Properties Of Fe-Doped Tio_2 Nanotube Arrays, Jing Li, Lan Sun, Hui-Fang Zhuang, Cheng-Lin Wang, Rong-Gui Du, Chang-Jian Lin
Journal of Electrochemistry
The Fe-doped TiO2 nanotube arrays were fabricated in Fe(NO3)3-HF mixing solutions by electrochemical anodic oxidation method,and characterized by FESEM,Raman,XPS and DRS.The effect of Fe concentratiions on photoelectrochemical property of the arrays was also investigated.The diameters and lengths of Fe-doped TiO2 nanotube arrays were 50~90 nm and about 200 nm,respectively.Compared with the undoped TiO2 nanotube arrays,the absorption edge of Fe-doped TiO2 nanotube arrays appeared red shifting.The more Fe content,the larger red shifting,in addition,the photocurrent of Fe-doped TiO2 nanotube arrays increased obviously.