Electrical and Computer Engineering Commons^™

A Low Cost Iot-Based Arabic License Plate Recognition Model For Smart Parking Systems, Mohammad Mahmoud Abdellatif, Noura Hany Elshabasy, Ahmed Emam Elashmawy, Mohamed Abdelraheem

Electrical Engineering

License Plate Recognition is one of the significant enablers that can be utilized in wide range of applications in ITS and smart cities. The proposed design relies on three image processing stages to achieve license plate identification with high accuracy which are pre-processing, segmentation, and character recognition. The canny edge detection method with various thresholds, contour detection, and masking techniques are used to locate the car edges and license plate. In the experiment presented in this paper, 200 images were used to identify Egyptian car plates. The model successfully identified Arabic license plates with 93% accuracy. A prototype is implemented …

Utilizing Machine Learning Algorithm In Predicting The Power Conversion Efficiency Limit Of A Monolithically Perovskites/Silicon Tandem Structure, Moustafa Ganoub, Omar Elsaban, Sameh O. Abdellatif Dr, Khaled Kirah, Hani Ghali

Electrical Engineering

Tandem structures have been introduced to the photovoltaics (PV) market to boost power conversion efficiency (PCE). Single-junction cells’ PCE, either in a homojunction or heterojunction format, are clipped to a theoretical limit associated with the absorbing material bandgap. Scaling up the single-junction cells to a multi-junction tandem structure penetrates such limits. One of the promising tandem structures is the perovskite over silicon topology. Si junction is utilized as a counter bare cell with perovskites layer above, under applying the bandgap engineering aspects. Herein, we adopt BaTiO3/CsPbCl3/MAPbBr3/CH3NH3PbI3/c-Si tandem structure to be investigated. In tandem PVs, various input parameters can be tuned …

Studying Routing Issues In Vanets Using Ns-3 And Sumo, Mohammad Mahmoud Abdellatif, Omar E. Aly

Electrical Engineering

ehicular Ad-hoc Networks VANETs are normally sparse, highly dense, and highly mobile with many different and ever-changing topologies. These characteristics impose a challenge on finding a routing algorithm that fits the requirements of such network. The aim of this work is to study the performance issues of VANETs under different scenarios using realistic mobility models. In this paper, a comparative study is done among Ad-hoc On- Demand Distance Vector (AODV), Optimized Link State Routing (OLSR) and position-based routing protocols, namely Greedy Perimeter stateless routing (GPSR), and Max duration Min angle GPSR (MMGPSR). The comparison is done using key quality of …

A Stochastic Spectrum Trading And Resource Allocation Framework For Opportunistic Dynamic Spectrum Access Networks, Mohamed Abdelraheem, Mohammad Mahmoud Abdellatif

Electrical Engineering

In this article, the spectrum trading problem between primary users and secondary networks is investigated. The secondary network requests multiple channels with the targeted availability to satisfy its users’ demands. Due to the uncertainty about the channels availability, stochastic optimization techniques are adopted to find the optimal set of channels for each secondary network for the lowest cost. Two different constraints on the secondary demand are defined. The first one is when the throughput has to be fully satisfied for a certain percentage of time, and the second one is when the expected value of the throughput has to exceed …

Honey Badger Optimizer For Extracting The Ungiven Parameters Of Pemfc Model: Steady-State Assessment, Hossam Ashraf, Sameh Osama Abdellatif Dr, Mahmoud Elkoly Dr, Attia Elfergany Prof

Electrical Engineering

In this work, a novel attempt is performed to optimally identify the seven ungiven parameters of the proton exchange membrane fuel cells (PEMFCs) steady-state model. A fitness function is adapted to reduce the sum of quadratic errors (SQEs) between the experimentally measured voltages and the corresponding computed values. A honey badger optimizer (HBO) is utilized to minimize the SQEs, exposed to a group of inequality bounds. Three test cases of well-known commercial PEMFCs units as benchmarking are elucidated and discussed over different steady-state operating conditions. Substantial comparisons to the other up-to-date optimizers published in the art-of-literature are provided to appraise …

Synergy Of Neuro-Fuzzy Controller And Tuna Swarm Algorithm For Maximizing The Overall Efficiency Of Pem Fuel Cells Stack Including Dynamic Performance, Hossam Ashraf, Mahmoud M. Elkholy Prof, Sameh O. Abdellatif, Attia A. El-Fergany Prof

Electrical Engineering

Recently, world endeavors are focused on promoting energy savings by operating both sources and loads at their maximum efficiency points. Thus, this paper presents a novel attempt to optimally determine the operating parameters of an isolated system comprising the proton exchange membrane fuel cells (PEMFCs) stack serving a variable load. A fitness function is adapted to maximize the PEMFCs stack’s efficiency using tuna swarm algorithm (TSA), subjected to set of inequality constraints. A well-known commercial type of PEMFCs stack namely Nedstack PS6 6 kW, are carefully studied over two TSA-based optimization scenarios. The first scenario aims at optimizing five operating …

Investigating The Capacitive Properties Of All-Inorganic Lead Halides Perovskite Solar Cells Using Energy Band Diagrams, Zahraa Ismail, Eman Farouk Sawires, Fathy Zaki Amer, Sameh Osama Abdellatif Dr

Electrical Engineering

Capacitance response of perovskite solar cells (PSCs) can be oppressed to deduce underlying physical mechanisms, both in the materials at external interfaces and in bulk materials. Accordingly, this paper investigates the Capacitance-Voltage (C-V) characteristic curves of cesium lead halides (CsPbX3: X = I, Br, or Cl) used as an active layer in PSCs. The SCAPS-1D simulator was used to harness the actual device (CsPbX3: X = I Br, or Cl) with material parameters from previous experimental work. The energy-band diagrams, J-V curves, and C-V curves of the three PSC structures were constructed and compared to carry out and investigate their …

Study The C-V Behavior Of Cesium-Lead Halides Perovskite Solar Cells Under Various Simulation Parameters, Zahraa Ismail, Eman Farouk Sawires, Fathy Zaki Amer, Sameh O. Abdellatif Dr

Electrical Engineering

Capacitance response of perovskite solar cells (PSCs) can be oppressed to deduce underlying physical mechanisms, both in the materials at external interfaces and in bulk materials. Accordingly, this paper investigates the Capacitance-Voltage (C-V) characteristic curves of cesium lead halides (CsPbX3: X = I, Br, or Cl) used as an active layer in PSCs. The SCAPS-1D simulator harnessed the actual device (CsPbX3: X = I Br, or Cl) with material parameters from previous experimental work. Three main simulation parameters were investigated: the thickness of the active layer, the doping, and the defects impacts.

Relationship Between Time-Constants And 3db Cutoff Of High-Order Damped Lti Systems, Vladimir I. Prodanov, Katherina Prodanov

Electrical Engineering

This paper deals with linear time-invariant (LTI) systems and examines the link between the 3dB cutoff and time-constants. It shows that the cutoff frequency of a low-pass damped network can be estimated from the reciprocal of a p-norm calculated from the system's time-constants. Furthermore, to achieve good accuracy the p factor must have a fractional value, for example, p=1.7. Two formulas are derived, and their performance evaluated using Monte Carlo simulations which reveal a sub-3% error for most cases.

Experimental Study And Modeling Of The GM-I Dependence Of Long-Channel Mosfets, Michael Cheng, Vladimir I. Prodanov

Electrical Engineering

This paper describes an experimental study and modeling of the current-transconductance dependence of the ALD1106 and ALD1107 arrays. The study tests the hypothesis that the I-g _m dependence of these 7.8 μm MOSFETs conforms to the Advanced Compact Model (ACM). Results from performed measurements, however, do not support this expectation. Despite the relatively large length, both ALD1106 and ALD1107 show sufficiently pronounced `short-channel' effects to render the ACM inadequate. As a byproduct of this effort, we confirmed the modified ACM equation. With an m factor of approximately 0.6, it captures the I-g _m dependence quite well. The paper also introduces …

Alumni Grassroots Leadership Enables Sponsored Course Development, Vladimir I. Prodanov, John Greene

Electrical Engineering

This paper presents a lab-centric course development where alumni, employed by an IAB member company, play a pivotal role. Recently the lead author of this paper qualified for a sabbatical leave and the college enthusiastically approved the proposal (a 400-level elective in networked sensors). He considered two class structures: lecture-only and lecture-lab. While lecture-lab is the desired mode of instruction, the development of such a course would take at least 2 quarters. Since extended sabbaticals are only partly funded by the university the creation of a lecture-lab course hinged on the availability of a sponsor. Simultaneously an alumnus, now with …

Method For Selecting Coupling And By-Pass Capacitors In Multi-Stage Linear Circuits, Vladimir I. Prodanov, Dale Dolan

Electrical Engineering

A method for selecting a set of coupling and by-pass capacitors is presented. The approach uses short-circuit time-constant analysis and for a given −3 dB cut-off frequency minimises the total capacitance used. This study offers a derivation of design formulas and shows their use via examples.

Uhf Rfid Antenna Impedance Matching Techniques, Kamron Sockolov, Dean Arakaki

Electrical Engineering

The modified T-match network uses planar inductive strips for conjugate matching Radio Frequency Identification (RFID) Integrated Circuits (RFICs). Narrow and broadband matching techniques and electromagnetic simulations are applied in [1] for specific designs. This paper extends these efforts through antenna element parameterization and design trade-off analysis. Narrow and broadband designs are fabricated; antenna input impedance and tag range tests confirm predictions.

Lecture Videos To Supplement Electromagnetic Classes At Cal Poly San Luis Obispo, Dean Y. Arakaki

Electrical Engineering

Electromagnetics and Transmission Lines is a fundamental, yet difficult subject in the Electrical Engineering (EE) field. To help improve information retention, a series of lecture videos was created to supplement traditional lectures, to facilitate in-class discussions, and to improve students’ proficiency and interest in electromagnetics.

Engineering electromagnetics classes at California Polytechnic State University, San Luis Obispo cover fundamentals to understand and analyze cell phone communications, radar systems (air traffic control, law enforcement), and biomedical imaging (MRI). However, this subject also requires considerable mathematics preparation in vector calculus, differential equations, linear algebra, and background in both physics and EE.

Lecture videos …

Instructables.Com As A Tool To Improve Student Outcomes And Promote Community Engagement (Work-In-Progress), Andrew Danowitz

Electrical Engineering

Project-based Learning (PBL) has become a popular pedagogical tool in Engineering. Projects force students to put theory learned in lecture into practice, exposes students to some of the nonidealities of real systems (imperfect instruments, uncooperative systems, etc.) that are difficult to convey in lecture or homework, and ideally motivates students by showing how course material is related real-world engineering problems. This work discusses my preliminary and ongoing research into using Instructables.com—a user-content generated website of “Do It Yourself” tutorials—as a tool to help amplify the benefits students derive from PBL. Specifically, I require students to document their projects in an …

A Paramedic Method Drill Master To Improve Student Writing, David Braun

Electrical Engineering

Engineering instructors have students write reports in order to help learn difficult concepts, data analysis, challenging problem solving, communication skills, and critical thinking. Sadly, many students seem to prefer obfuscating the subject matter and key ideas by using painfully unclear writing. An instructor dismayed by poor prose in submitted assignments has numerous familiar options available. Consider just a few:

1. Ignore the poor writing

2. Mark every error directly

3. Mark every error with a marginal comment

4. Give general feedback about the poor writing over the entire assignment

5. Expect students to rewrite and resubmit work

6. Change careers …

Organic-Based Microwave Frequency Absorbers Using Corn Stover, Ben Smythe, Sean Casserly, Dean Arakaki

Electrical Engineering

Commercial antenna test chambers (anechoic) currently use polyurethane foam absorbers on chamber interiors to eliminate undesired radio-frequency (RF) reflections. While effectively absorbing microwave signals, polyurethane material particulates over time adding contaminants to clean rooms and reducing absorber lifetime. These absorbers also release toxic gas when operating under high temperatures and pose a health risk to direct-contact personnel. This paper presents reflectivity analysis and performance of alternative organic-based (corn stover) microwave frequency absorbers for use in anechoic chambers. These absorbers are composed of renewable materials and eliminate the toxic gas release problem for polyurethane materials under high power test conditions. Preliminary …

Multi-Technique Broadband Microstrip Patch Antenna Design, Daniel Colles, Dean Arakaki

Electrical Engineering

Microstrip patch antennas offer low profile and small footprint advantages, but limited operating bandwidth. Substantial research focuses on broadband techniques. This paper presents the design, simulation, fabrication, and characterization of a 30% bandwidth microstrip patch antenna that incorporates multiple broadband techniques while minimizing footprint area. Methods include patch shape, dielectric thickness, and coupling slot optimization, with capacitively-coupled L-probe feeds. The final design incorporates an electrically thick dielectric and circular-E patch geometry. Microstrip L-probe feed and coupling slot dimensions were optimized via HFSS simulations. The final design was fabricated, and then tested in an anechoic chamber. The new design has measured …

Analytical Parametric Model Used To Study The Influence Of Electrostatic Force On Surface Coverage During Electrospinning Of Polymer Fibers, Joshua Beisel, Jerry Kyeremateng, Lance Purkett, Jessica Andriolo, Jack L. Skinner

Electrical Engineering

Electrospinning (ES) can readily produce polymer fibers with cross-sectional dimensions ranging from tens of nanometers to tens of microns. Qualitative estimates of surface area coverage are rather intuitive. However, quantitative analytical and numerical methods for predicting surface coverage during ES have not been covered in sufficient depth to be applied in the design of novel materials, surfaces, and devices from ES fibers. This article presents a modeling approach to ES surface coverage where an analytical model is derived for use in quantitative prediction of surface coverage of ES fibers. The analytical model is used to predict the diameter of circular …

A Class-C Amplifier Linearized By A Constant Conduction Angle Biasing Circuit, Gursewak Singh Rai, Vladimir I. Prodanov, Stephen Garber

Electrical Engineering

This work presents a dynamic biasing topology capable of linearizing a Class-C power amplifier (PA). The topology utilizes a control loop that senses the operating conditions of the power device by means of a scaled replica. The loop operates on the principle of keeping the conduction angle constant and thereby ensuring linearity. The work details some of the design considerations that should prove useful to a designer wanting to implement the topology in an RF integrated circuit. Measurement results from a fully-functional low-frequency prototype bring merit to the topology.

Identifying At-Risk Students: How Use Of Optional Study Materials And Collection Of Graded Work Correlate With Academic Performance, Vladimir I. Prodanov

Electrical Engineering

We report on a study designed to identify students at risk by monitoring certain academic behaviors. Two different approaches were implemented. The first one involves monitoring student access of optional homework problems. While this approach was successful in the early identification of students at-risk, optional homework (as opposed to mandatory one) degrades attainment of learning objectives. The second approach relies upon “counting” of uncollected work. Since no grades were posted, the only way for the students to keep track of their performance was to collect their work. Failure to collect graded work, we argue, is indicative of weak motivation, poor …

Methanol Fuel Safety - A Practical Guide, Art Maccarley

Electrical Engineering

This guide was written initially for the students at Cal Poly engaged in the conversion of IC engines to methanol fuel, especially my students working on methanol projects in my course “Automotive Technologies for a Sustainable Future”. It may be of interest to anyone considering the conversion or operation of an engine on methanol, or to those that handle methanol for other purposes. One of many Materials Safety Data Sheets (MSDS) for methanol that can be found online is: http://www.midi-inc.com/pdf/MSDS_Methanol.pdf.

Empirical Model For The Transconductance-Current Dependence Of Short-Channel Mosfets, Vladimir I. Prodanov

Electrical Engineering

This work is concerned with the g_m-I dependence of sub-micrometer MOSFETs. The transconductance-current expression given by the Advanced Compact Model (ACM) is reviewed and simple modification is proposed. The modification yields an expression which (with proper parametrization) captures the g_m-I dependence of short-channel MOSFETs. The proposed expression is “universal” in the sense that it is capable of modeling the g_m-I dependence of long-channel MOSFETs, short-channel MOSFETs, and resistively-degenerated BJTs.

Structural Damage Detection Using Artificial Neural Networks And Wavelet Transform, Arthur Shi, Xiao-Hua Yu

Electrical Engineering

With the ever-increasing demand for the safety and functionality of civil infrastructures, structure health monitoring (SHM) has now become more and more important.

Recent developments in computational intelligence and digital signal processing offer great potentials to develop a more efficient, reliable, and robust structure damage identification system. In this paper, the application of artificial neural networks and wavelet analysis is investigated to develop an intelligent and adaptive structural damage detection system. The proposed approach is tested on an IASC (International Association for Structural Control)-ASCE (American Society of Civil Engineers) SHM benchmark problem. Satisfactory computer simulation results are obtained.

Traffic Signal Optimization Using Ant Colony Algorithm, David Renfrew, Xiao-Hua Yu

Electrical Engineering

Traffic signal control is an effective way to improve the efficiency of traffic networks and reduce users’ delays. Ant Colony Optimization (ACO) is a meta-heuristic algorithm based on the behavior of ant colonies searching for food. ACO has successfully been employed to solve many complicated combinatorial optimization problems and its stochastic and decentralized nature fits well with traffic networks. This research investigates the application of the ant colony algorithm to minimize user delay at traffic intersections. Various ACO algorithms are discussed and a rolling horizon approach is also employed to achieve real-time adaptive control. Computer simulation results show that this …

In-Class Lecture Recording: What Lecture Capture Has To Offer To The Instructor, Vladimir I. Prodanov

Electrical Engineering

The purpose of this study is to determine the impact of lecture recording upon the instructional faculty. The following aspects are explored: 1) impact on class enrollment; 2) impact on class attendance; 3) usefulness of obtained statistical results for course improvement. The study is based upon data collected in a junior-level Electrical Engineering class with enrollment of 76 students. The data was collected using anonymous surveys and Blackboard’s statistical tracking utility. The results from the survey show that providing lecture recordings does not have significant impact upon students’ decision to attend lectures, but it has pronounced impact upon their enrollment …

Student Perception Of Lecture Video Use As A Means To Increase Time For In Class Problem Solving Applications, Dale Dolan, Vladimir I. Prodanov, Taufik

Electrical Engineering

The purpose of this study is to examine student perceptions of lecture video use as a means to increase available time for in class problem solving in a teaching and learning context. A portion of face to face lectures was replaced with prerecorded lecture video whose viewing was assigned for homework. The freed lecture period was used for additional in class problem solving development, without sacrificing the theory and background that is fundamental. In order to assess the effectiveness of the change in format, student perception was assessed through an anonymous online survey. The survey was given at the completion …

Design And Assembly Of An Antenna Demonstration System, Alexander J. Hempy, Michael P. Civerolo, Dean Y. Arakaki

Electrical Engineering

This paper describes the design, assembly, and operation of a self-contained wireless demonstration system that required only dc power supplies. The system demonstrated polarization effects, radiation patterns, gain, directivity, and signal interference from environmental barriers from dipole, corner reflector (simulated antenna array), Quagi, and embedded patch antennas. The system included an RF oscillator, high-frequency amplifiers,RF bandpass filters, a signal-strength indicator, and multiple adjustable antenna-mounting platforms.

Wavelength Dependence Of Transverse Mode Coupling With/Without E-Block Of Gan Laser Cavity, K. Lal, G. Chavoor, Xiaomin Jin

Electrical Engineering

Transverse mode wavelength dependence in the gallium nitride (GaN) laser cavity is a new topic. Modal analysis simulations are run to optimize the blue GaN-based laser diode with a wavelength of 400, 430, and 460 nm. It is shown that the optical confinement factor (OCF) has a strong dependence on wavelength of emission and electron-block (e-block) thickness. The OCF can be changed from 4.9% at a 460-nm wavelength to 7.6% at 400 nm, which is a 55% difference. The effect of adding an e-block layer of different widths is also investigated with results showing that an e-block layer can change …

Electric Vehicle Safety, Art Maccarley

Electrical Engineering

No abstract provided.