Electrical and Computer Engineering Commons^™

Model-Based Analysis Of Electric Drive Options For Medium-Duty Parcel Delivery Vehicles, Robb A. Barnitt, Aaron D. Brooker, Laurie Ramroth

Publications (T)

Medium-duty vehicles are used in a broad array of fleet applications, including parcel delivery. These vehicles are excellent candidates for electric drive applications due to their transient-intensive duty cycles, operation in densely populated areas, and relatively high fuel consumption and emissions. The National Renewable Energy Laboratory (NREL) conducted a robust assessment of parcel delivery routes and completed a model-based techno-economic analysis of hybrid electric vehicle (HEV) and plug-in hybrid electric vehicle (PHEV) configurations. First, NREL characterized parcel delivery vehicle usage patterns, most notably daily distance driven and drive-cycle intensity. Second, drive-cycle analysis results framed the selection of drive cycles used …

College Of Engineering Senior Design Competition Fall 2010, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

The Impact Of Quality Management Systems During A Pebble Bed Modular Reactor Project : A Case Study, Lwandiso Zamxaka

Lwandiso L Zamxaka

In the nuclear industry, Quality Management Systems are extremely important,especially if one wishes to improve public acceptance of radioactive solutions.There is normally minimum communication between the public and scientists,especially in nuclear science. People are not comfortable with nuclear technology,based on the past history of the Chernobyl catastrophe. Consequently, it is difficult to discuss important and sensitive issues like disposing of nuclear waste. Quality Management Systems can improve public confidence and communication. Integrated Management Systems in the project planning stage of the project can be a proactive step towards preventing unnecessary delays and costs. There is a perception that quality is …

Economic Analysis Of A Brackish Water Photovoltaic-Operated (Bwro-Pv) Desalination System, Ali Al-Karaghouli, Lawrence L. Kazmerski

Publications (E)

The photovoltaic (PV)-powered reverse-osmosis (RO) desalination system is considered one of the most promising technologies in producing fresh water from both brackish and sea water, especially for small systems located in remote areas. We analyze the economic viability of a small PV-operated RO system with a capacity of 5 m³/day used to desalinate brackish water of 4000 ppm total dissolve solids, which is proposed to be installed in a remote area of the Babylon governorate in the middle of Iraq; this area possesses excellent insolation throughout the year. Our analysis predicts very good economic and environmental benefits of …

User's Guide To Mbc3: Multi-Blade Coordinate Transformation Code For 3-Bladed Wind Turbine, G. S. Bir

Publications (E)

The dynamics of wind turbine rotor blades are conventionally expressed in rotating frames attached to the individual blades. The tower-nacelle subsystem though, sees the combined effect of all rotor blades, not the individual blades. Also, the rotor responds as a whole to excitations such as aerodynamic gusts, control inputs, and tower-nacelle motion—all of which occur in a nonrotating frame. Multi-blade coordinate transformation (MBC) helps integrate the dynamics of individual blades and express them in a fixed (nonrotating) frame. MBC involves two steps: transforming the rotating degrees of freedom and transforming the equations of motion. Reference 1 details the MBC operation. …

Green Power Marketing In The United States: A Status Report (2009 Data), Lori Bird, Jenny Sumner

Publications (E)

This report documents green power marketing activities and trends in the United States. Aggregate green power sales data for all voluntary purchase markets across the United States are presented for 2009. The data presented in this report are based primarily on figures provided to NREL by utilities and independent renewable energy marketers. Because data cannot be obtained from all market participants, the estimates presented here likely represent an underestimate of the market size. Key trends identified in this year’s report include:
• In 2009, total retail sales of renewable energy in voluntary markets exceeded 30 million MWh, an increase of …

Further Developments On The Geothermal System Scoping Model, Mark Antkowiak, Rosemary Sargent, Jesse W. Geiger

Publications (E)

The fields of well construction and engineering, power plant construction and engineering, and reservoir engineering often proceed independently of one another. Yet the subsystems of a geothermal plant with which each of these fields is concerned need to be integrated in order to create a viable geothermal power system and make enhanced (or engineered) geothermal systems (EGS) a technical and an economic reality. Furthermore, each of these subsystems need to be examined in the context of the overall power system to aid with plant construction, and–more salient to the U.S. Department of Energy–to help determine best investment of research dollars. …

The Applications And Limitations Of Printable Batteries, Matthew Delmanowski

Graphic Communication

This study focuses on the potential applications for printed batteries and how they could affect the printing industry. It also analyzes the main problems associated with manufacturing this technology and what needs to be done to overcome these issues. To find the answers to these questions, two methods of research were used. The first was through the elite and specialized interviewing of Dr. Scott Williams of Rochester Institute of Technology and Professor Nancy Cullins from Cal Poly. The second form of research was a common, yet useful, method called secondary research. This entailed looking at recent written research papers about …

College Of Engineering Senior Design Competition Spring 2010, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Each student in his or her senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. The senior design project encourages the student to use everything learned in the engineering program to create a practical, real-world solution to an engineering challenge.

A highlight of the year-long senior design project is the senior design competition. This competition, which usually takes place the week before finals each semester, helps focus the senior students on increasing the quality and potential for commercial application for their design projects.

Judges from local industry evaluate the projects on innovation, commercial …

Input-Output Analysis Of Irish Construction Sector Greenhouse Gas Emissions, Adolf Acquaye, Aidan Duffy

Articles

Ireland is committed to limiting its greenhouse gas (GHG) emissions to 113% of 1990 levels over the period 2008-12 and to 84% of 2005 levels by 2020 under the Kyoto Agreement and the EU’s ’20 20’ by 2020 respectively. National policies have targeted many industry sectors but have failed to directly tackle GHG emissions associated with construction activity. This paper estimates energy and GHG emissions intensities of the Irish construction sector and subsectors and estimates its contribution to Irish national emissions. This information is used to identify and assess the impacts of policy measures which would result in a reduction …

Dc/Dc Converter For A Small Scale Wind Hydrogen System, Joel M. Jacobs

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

An electronic converter is designed for an isolated renewable energy system. In this system, energy produced by a small wind turbine is used to extract hydrogen from water. Unique aspects of this application that affect the performance of the converter will be defined. Design considerations of the individual components will be discussed. Calculations on performance and validation of those calculations are also presented. Lastly, an economic analysis of the produced hydrogen will be performed.

Conference Proceedings 3rd International Scientific Conference On “Energy Systems With It” At Alvsjö Fair In Association With Energitinget March 16-17 2010, Dr. Erik Dahlquist, Dr. Jenny Palm

Dr. Erik Dahlquist

2010 “The Energiting” is performed for the 12th time. The International Scientific conference is arranged for the 3rd time. The organisers are Swedish Energy Agency, Mälardalen University and the Research School for Energy Systems with LiU, KTH, UU and CTH. The first topic will be “Energy systems” covering use of renewable energy sources, energy conversion and process efficiency improvement with new technologies, as well as societal aspects of the introduction of new technologies. The second topic is “Energy and IT”. This covers energy and load management, interaction between production, distribution and “consumption”, usage of data for decision support and control, …

Solar Power And The Electric Grid, Energy Analysis, Nrel Energy Analysis

Publications (E)

In today’s electricity generation system, different resources make different contributions to the electricity grid. This fact sheet illustrates the roles of distributed and centralized renewable energy technologies, particularly solar power, and how they will contribute to the future electricity system. The advantages of a diversified mix of power generation systems are highlighted.

Barrier Coatings For Thin Film Solar Cells: Final Subcontract Report, L. C. Olsen

Publications (E)

This program has involved investigations of the stability of CdTe and copper-indium-gallium-diselenide (CIGS) solar cells under damp heat conditions and effects of barrier coatings. CdTe and CIGS cells were subjected to environmental conditions characterized by 60ºC and 90% relative humidity (60/90), and to some extent 85ºC and 85 % relative humidity (85/85). Barrier coating technology developed at PNNL for OLEDs was used to investigate approaches to encapsulation of the two types of thin film solar cells. Moisture barriers consisting of multi-layer coatings involving alternating layers of polymer and aluminum oxide were deposited directly onto the front surface of CIGS cells …

Consortia Focused On Photovoltaic R&D, Manufacturing, And Testing: A Review Of Existing Models And Structures, Charlie Coggeshall, Robert M. Margolis

Publications (E)

As the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program prepares to initiate a new cost-shared research and development (R&D) effort on photovoltaic (PV) manufacturing, it is useful to review the experience to date with consortia focused on PV R&D, manufacturing, and testing. Information was gathered for this report by conducting interviews and accessing Web sites of 14 U.S. consortia and four European consortia, each with either a primary focus on or an emerging interest in PV technology R&D, manufacturing, or testing. Additional input was collected from several workshops held by the DOE and National Academy of Sciences (NAS) …

The Value Of Concentrating Solar Power And Thermal Energy Storage, Ramteen Sioshansi, Paul Denholm

Publications (E)

This paper examines the value of concentrating solar power (CSP) and thermal energy storage (TES) in four regions in the southwestern United States. Our analysis shows that TES can increase the value of CSP by allowing more thermal energy from a CSP plant’s solar field to be used, by allowing a CSP plant to accommodate a larger solar field, and by allowing CSP generation to be shifted to hours with higher energy prices. We analyze the sensitivity of CSP value to a number of factors, including the optimization period, price and solar forecasting, ancillary service sales, capacity value and dry …

Doe Request For Information (Rfi) De-Foa-0000153 Pv Manufacturing Initiative: Summary Report, National Renewable Energy Laboratory

Publications (E)

Clean Cities hosts a collection of tools on the exploring concepts for a “PV Manufacturing Initiative” to facilitate the development of a strong photovoltaic (PV) manufacturing industry in the United States. As an integral part this effort, and to inform the creation of a new funding opportunity in this area, DOE sought feedback from the PV industry.

This document summarizes the results of the PV Manufacturing Request for Information (RFI), DE-FOA-0000153. (See Attachment 1.) The RFI was posted on http://www.grants.gov on 4 September 2009 and the NREL Web site on 9 September 2009. Respondents were asked to submit RFI inputs …

The Role Of Energy Storage With Renewable Electricity Generation, Paul Denholm, Erik Ela, Brendan Kirby, Michael Milligan

Publications (E)

Renewable energy sources, such as wind and solar, have vast potential to reduce dependence on fossil fuels and greenhouse gas emissions in the electric sector. Climate change concerns, state initiatives including renewable portfolio standards, and consumer efforts are resulting in increased deployments of both technologies. Both solar photovoltaics (PV) and wind energy have variable and uncertain (sometimes referred to as “intermittent”) output, which are unlike the dispatchable sources used for the majority of electricity generation in the United States. The variability of these sources has led to concerns regarding the reliability of an electric grid that derives a large fraction …

Analysis Of Hybrid Hydrogen Systems: Final Report, J. Dean, R. Braun, D. Munoz, M. Penev, C. Kinchin

Publications (E)

This project examined biomass pathways for hydrogen production and how they can be hybridized to support renewable electricity generation. The project considered many potential hybrid systems before narrowing the focus to two. The systems were studied in detail for process feasibility and economic performance. The best-performing system was estimated to produce hydrogen at a cost ($1.67/kg) within range of the Department of Energy target for central biomass-derived hydrogen production, while also providing value-added energy services to the electric grid.

2008 Solar Technologies Market Report, U.S. Department Of Energy

Publications (E)

This report focuses on the U.S. solar electricity market, including photovoltaic (PV) and concentrating solar power (CSP) technologies. The report provides an overview of global and U.S. installation trends. It also presents production and shipment data, material and supply chain issues, and solar industry employment trends. It also presents cost, price, and performance trends; and discusses policy and market drivers such as recently passed federal legislation, state and local policies, and developments in project financing. The final chapter provides data on private investment trends and near-term market forecasts.

Nrel: A Year In Clean Energy Innovations: A Review Of Nrel's Feature Stories, National Renewable Energy Laboratory

Publications (E)

The National Renewable Energy Laboratory (NREL) is the nation’s primary laboratory for renewable energy and energy efficiency research and development.

NREL’s mission and strategy are focused on advancing the U.S. Department of Energy’s and our nation’s energy goals. The laboratory’s scientists and researchers support critical market objectives to accelerate research from scientific innovations to market-viable alternative energy solutions. At the core of this strategic direction are NREL’s research and technology development competencies. These areas span from understanding renewable resources for energy, to the conversion of these resources to renewable electricity and fuels, and ultimately to the use of renewable electricity …

Wind Powering America: Fy09 Activities Summary, National Renewable Energy Laboratory

Publications (E)

The Wind Powering America FY09 Activities Summary reflects the accomplishments of state Wind Working Groups, WPA programs at the National Renewable Energy Laboratory, and partner organizations.

Ab Initio Simulations Of Hydrogen And Lithium Adsorption On Silicene, Tim H. Osborn

Browse all Theses and Dissertations

The energies and temperature-dependent dynamics of hydrogen and lithium chemisorption on a silicon nanosheet, called silicene, were studied using density functional theory and molecular-dynamics (MD) simulations. Silicene has a buckled honeycomb structure, and has been fabricated as suspended monolayer sheets and nanoribbons in recent experiments. We calculated the adsorption energies of hydrogen and lithium on silicene for different adsorption ratios between 3.1% and 100%. The studies will clarify the characteristics of these novel and promising nanomaterials, and pave the way for their applications.

For Hydrogen, the adsorption energy had a maximum of 3.01 eV/H for complete hydrogenation, and decreased by …

Sulfur-Tolerant Catalyst For The Solid Oxide Fuel Cell, Bozeman Joe Frank Iii

Browse all Theses and Dissertations

JP-8 fuel is easily accessible, transportable, and has hydrogen content essential to solid oxide fuel cell (SOFC) operation. However, this syngas has sulfur content which results in a poisonous hydrogen sulfide that degrades electrochemical activity and causes complete SOFC failure in some cases. The goal is to synthesize and verify a cost-effective, catalyst supported on cerium oxide that either stabilizes ionic conductivity in the presence of hydrogen sulfide and/or is highly sulfur-resistant. After thorough computational analysis, it was concluded that the platinum-copper skin catalyst was the most cost-effective, sulfur-resistant catalyst. Experimental synthesis of copper, platinum, and platinum-copper skin catalysts supported …

Fabrication Of Zinc Oxide Thin Films For Renewable Energy And Sensor Applications, Theresa Y. Hill

Browse all Theses and Dissertations

Progress in commercializing renewable energy technologies is being advanced by developments in Zinc Oxide material science. The photovoltaic cell, for example, generates electricity by receiving solar energy into the cell, generating electrons, and simultaneously transporting electrical charge out of the cell. Metals are capable of removing electrical charge but block transmission of sunshine. Glass and plastics are capable of transmitting sunshine but block the removal of electrical charge. Therefore an exterior layer that is both optically transparent and electrically conductive is desirable. Transparent conductive oxides (TCOs) are the ideal material for such applications since they are capable of both functions. …

Simulation And Optimization Of Ultra Thin Photovoltaics, Jose Luis Cruz-Campa

Open Access Theses & Dissertations

Sandia National Laboratories (SNL) conducts pioneering research and development in Micro-Electro-Mechanical Systems (MEMS) and solar cell research. This dissertation project combines these two areas to create ultra-thin small-form-factor crystalline silicon (c-Si) solar cells. These miniature solar cells create a new class of photovoltaics with potentially novel applications and benefits such as dramatic reductions in cost, weight and material usage.

At the beginning of the project, unusually low efficiencies were obtained in the research group. The intention of this research was thus to investigate the main causes of the low efficiencies through simulation, design, fabrication, and characterization.

Commercial simulation tools were …