Computer Engineering Commons^™

Control Of Fully-Actuated Aerial Manipulators And Omni-Directional Multirotors, Riley M. Mccarthy

Mechanical Engineering ETDs

This thesis details the system modeling, design, control, simulation, construction, and
testing of both a fully-actuated and omni-directional multirotor aerial system created
for the primary purpose of performing active tasks with their environment. This work
verifies the capabilities of both systems through empirical testing, and demonstrates
how through the use of new control methods and physical designs multirotors can
expand their purpose from passive inspection based tasks to active contact based
tasks. These systems take advantage of newly implemented control allocation features present in the PX4 flight control software, version 1.14. The use of which makes designing controllers for such …

Enabling Intelligent Network Management Through Multi-Agent Systems: An Implementation Of Autonomous Network System, Petro Mushidi Tshakwanda

Electrical and Computer Engineering ETDs

This Ph.D. dissertation presents a pioneering Multi-Agent System (MAS) approach for intelligent network management, particularly suited for next-generation networks like 5G and 6G. The thesis is segmented into four critical parts. Firstly, it contrasts the benefits of agent-based design over traditional micro-service architectures. Secondly, it elaborates on the implementation of network service agents in Python Agent Development Environment (PADE), employing machine learning and deep learning algorithms for performance evaluation. Thirdly, a new scalable approach, Scalable and Efficient DevOps (SE-DO), is introduced to optimize agent performance in resource-constrained settings. Fourthly, the dissertation delves into Quality of Service (QoS) and Radio Resource …

Optimizing High-Performance Computing Design: The Impacts Of Bandwidth And Topology Across Workloads For Distributed Shared Memory Systems, Jonathan A. Milton

Electrical and Computer Engineering ETDs

With the complexity of high-performance computing designs continuously increasing, the importance of evaluating with simulation also grows. One of the key design aspects is the network architecture; topology and bandwidth greatly influence the overall performance and should be optimized. This work uses simulations written to run in the Structural Simulation Toolkit software framework to evaluate a variety of architecture configurations, identify the optimal design point based on expected workload, and evaluate the changes with increased scale. The results show that advanced topologies outperform legacy architectures justifying the additional design complexity; and that after a certain point increasing the bandwidth provides …

Vi Energy-Efficient Memristor-Based Neuromorphic Computing Circuits And Systems For Radiation Detection Applications, Jorge Iván Canales Verdial

Electrical and Computer Engineering ETDs

Radionuclide spectroscopic sensor data is analyzed with minimal power consumption through the use of neuromorphic computing architectures. Memristor crossbars are harnessed as the computational substrate in this non-conventional computing platform and integrated with CMOS-based neurons to mimic the computational dynamics observed in the mammalian brain’s visual cortex. Functional prototypes using spiking sparse locally competitive approximations are presented. The architectures are evaluated for classification accuracy and energy efficiency. The proposed systems achieve a 90% true positive accuracy with a high-resolution detector and 86% with a low-resolution detector.

Network Economics-Based Crowdsourcing In Online Social Networks, Natasha S. Kubiak

Electrical and Computer Engineering ETDs

This thesis addresses the challenge of user recruitment by various competing marketing agencies (MAs) in Online Social Networks. A labor economics approach, following the principles of contract theory, is devised to enable MAs to reveal the potential of each participating user to contribute a personalized level of quality and quantity of information to the crowdsourcing process. The MAs objective is to maximize their personal benefit, i.e., total utility obtained, given its budget. The latter optimization problem is formulated as a Generalized Colonel Blotto (GCB) game among the MAs, where each MA aims at incentivizing each user to report its information. …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

Intelligent Internet Of Things Frameworks For Smart City Safety, Dimitrios Sikeridis

Electrical and Computer Engineering ETDs

The emerging Smart City ecosystem consists of a vast edge network of Internet of Things (IoT) devices that continuously interact with mobile devices carried by its citizens. In this setting, the IoT infrastructure, apart from the main communications facilitator, acts as a crowdsourcing mechanism that collects massive amounts of user data, and can support public safety applications for the Smart City. In this thesis, we design and analyze learning mechanisms that extract intelligence from crowd interactions with the wireless IoT infrastructure, and optimize its energy efficiency while operating as a public safety network. First, we deploy a multi-story facility testbed …

Airborne Counter-Uncrewed Systems With Runtime Assurance Control, Isaac J. Seslar

Mechanical Engineering ETDs

This thesis develops a response to the increase in the availability of the commercially available uncrewed aerial systems and is dedicated to the detection, classification, and tracking required to successfully neutralize when determined malicious. A requirement of actively avoiding obstacles using runtime assurance is addressed and designed to keep the hardware safe in potentially dangerous situations. This work will elaborate on the several components the test bed is comprised of, specifically the hardware and software portions that successfully solve the problem. The software encompasses the simulation, the multiple algorithms required for the tracking, and the machine learning required for detection …

Side Channel Attack Counter Measure Using A Moving Target Architecture, Jithin Joseph

Electrical and Computer Engineering ETDs

A novel countermeasure to side-channel power analysis attacks called Side-channel Power analysis Resistance for Encryption Algorithms using DPR or SPREAD is investigated in this thesis. The countermeasure leverages a strategy that is best characterized as a moving target architecture. Modern field programmable gate arrays (FPGA) architectures provide support for dynamic partial reconfiguration (DPR), a feature that allows real-time reconfiguration of the programmable logic (PL). The moving target architecture proposed in this work leverages DPR to implement a power analysis countermeasure to side-channel attacks, the most common of which are referred to as differential power analysis (DPA) and correlation power analysis …

Incentivization In Mobile Edge Computing Using A Full Bayesian Approach, Sean Lebien

Electrical and Computer Engineering ETDs

The advances of multi-access edge computing (MEC) have paved the way for the integration of the MEC servers, as intelligent entities into the Internet of Things (IoT) environment as well as into the 5G radio access networks. In this thesis, a novel artificial intelligence-based MEC servers’ activation mechanism is proposed, by adopting the principles of Reinforcement Learning (RL) and Bayesian Reasoning. The considered problem enables the MEC servers’ activation decision-making, aiming at enhancing the reputation of the overall MEC system, as well as considering the total computing costs to serve efficiently the users’ computing demands, guaranteeing at the same time …

Intelligent Algorithm For Trapezoidal Interval Valued Neutrosophic Network Analysis, Florentin Smarandache, Said Broumi, Deivanayagampillai Nagarajan, Malayalan Lathamaheswari, Mohamed Talea, Assia Bakali

Branch Mathematics and Statistics Faculty and Staff Publications

The shortest path problem has been one of the most fundamental practical problems in network analysis. One of the good algorithms is Bellman-Ford, which has been applied in network, for the last some years. Due to complexity in the decision-making process, the decision makers face complications to express their view and judgment with an exact number for single valued membership degrees under neutrosophic environment. Though the interval number is a special situation of the neutrosophic, it did not solve the shortest path problems in an absolute manner. Hence, in this work, the authors have introduced the score function and accuracy …

Nonlinear Least Squares 3-D Geolocation Solutions Using Time Differences Of Arrival, Michael V. Bredemann

Mathematics & Statistics ETDs

This thesis uses a geometric approach to derive and solve nonlinear least squares minimization problems to geolocate a signal source in three dimensions using time differences of arrival at multiple sensor locations. There is no restriction on the maximum number of sensors used. Residual errors reach the numerical limits of machine precision. Symmetric sensor orientations are found that prevent closed form solutions of source locations lying within the null space. Maximum uncertainties in relative sensor positions and time difference of arrivals, required to locate a source within a maximum specified error, are found from these results. Examples illustrate potential requirements …

Artificial Intelligence Empowered Uavs Data Offloading In Mobile Edge Computing, Nicholas Alexander Kemp

Electrical and Computer Engineering ETDs

The advances introduced by Unmanned Aerial Vehicles (UAVs) are manifold and have paved the path for the full integration of UAVs, as intelligent objects, into the Internet of Things (IoT). This paper brings artificial intelligence into the UAVs data offloading process in a multi-server Mobile Edge Computing (MEC) environment, by adopting principles and concepts from game theory and reinforcement learning. Initially, the autonomous MEC server selection for partial data offloading is performed by the UAVs, based on the theory of the stochastic learning automata. A non-cooperative game among the UAVs is then formulated to determine the UAVs' data to be …

Large Scale Electronic Health Record Data And Echocardiography Video Analysis For Mortality Risk Prediction, Alvaro Emilio Ulloa Cerna

Electrical and Computer Engineering ETDs

Electronic health records contain the clinical history of patients. The enormous potential for discovery in such a rich dataset is hampered by their complexity. We hypothesize that machine learning models trained on EHR data can predict future clinical events significantly better than current models. We analyze an EHR database of 594,862 Echocardiography studies from 272,280 unique patients with both unsupervised and supervised machine learning techniques.

In the unsupervised approach, we first develop a simulation framework to evaluate a family of different clustering pipelines. We apply the optimized approach to 41,645 patients with heart failure without providing any survival information to …

Mesh Node Communication System For Fire Figthers, Eric E. Hamke, Trace Norris, Jessica E. Ladd, Jeffrey K. Eaton, Jicard J. Malveaux, Manish Bhattarai, Ramiro Jordan, Manel Martinez-Ramon

Electrical & Computer Engineering Technical Reports

This report describes the prototype and demonstration of a reliable local area network (LAN) of devices able to interconnect a crew of fire fighters with a communications node. The data consists of images for thermal cameras at a given rate and other low bandwith data taken from the different sensors of the fire fighter gear, that are connected to the transmitter using a Bluetooth personal area network (PAN). The physical environment is indoors and it is expected that all nodes of the communication networks are distributed in different positions into a building.

Improvement Of The Material’S Mechanical Characteristics Using Intelligent Real Time Control Interfaces In Hfc Hardening Process, Florentin Smarandache, Luige Vladareanu, Mihaiela Iliescu, Victor Vladareanu, Alexandru Gal, Octavian Melinte, Adrian Margean

Branch Mathematics and Statistics Faculty and Staff Publications

The paper presents Intelligent Control (IC) Interfaces for real time control of mechatronic systems applied to Hardening Process Control (HPC) in order to improvement of the material’s mechanical characteristics. Implementation of IC laws in the intelligent real time control interfaces depends on the particular circumstances of the models characteristics used and the exact definition of optimization problem. The results led to the development of the IC interfaces in real time through Particle Swarm Optimization (PSO) and neural networks (NN) using off- line the regression methods.

Frequency Domain Decomposition Of Digital Video Containing Multiple Moving Objects, Victor M. Stone

Electrical and Computer Engineering ETDs

Motion estimation has been dominated by time domain methods such as block matching and optical flow. However, these methods have problems with multiple moving objects in the video scene, moving backgrounds, noise, and fractional pixel/frame motion. This dissertation proposes a frequency domain method (FDM) that solves these problems. The methodology introduced here addresses multiple moving objects, with or without a moving background, 3-D frequency domain decomposition of digital video as the sum of locally translational (or, in the case of background, a globally translational motion), with high noise rejection. Additionally, via a version of the chirp-Z, fractional pixel/frame motion detection …

Cloudsat: Iot Approach To Small Satellite Ground Infrastructure, Brian Zufelt

Electrical and Computer Engineering ETDs

Over the last decade, the cost of space access has dramatically decreased with the creation of the CubeSat standard. The CubeSat standard defines the structural requirements for an on-orbit deployer and satellite to be placed into orbit. The average cost of creating a space mission with the CubeSat standard can range from $200 thousand to over $3 million. This lower cost has allowed many Universities, and small businesses to create their own space programs. However, a significant portion of the investment for any new space asset is the development of the ground system to communicate with the satellite. These costs …

A Novel Indoor Positioning System For Firefighters In Unprepared Scenarios, Vamsi Karthik Vadlamani

Electrical and Computer Engineering ETDs

Situational awareness and indoor positioning of firefighters are types of information of paramount importance to the success of search and rescue operations. GPS units are undependable for use in Indoor Positioning Systems due to their associated mar- gins of error in position and their reliance on satellite communication that can be interrupted inside large structures. There are few other techniques like dead reck- oning, Wifi and bluetooth based triangulation, Structure from Motion (SFM) based scene reconstruction for Indoor positioning system. However due to high temper- atures, the rapidly changing environment of fires, and low parallax in the thermal images, the …

Intelligent Computational Transportation, Yuming Zhang

Electrical and Computer Engineering ETDs

Transportation is commonplace around our world. Numerous researchers dedicate great efforts to vast transportation research topics. The purpose of this dissertation is to investigate and address a couple of transportation problems with respect to geographic discretization, pavement surface automatic examination, and traffic ow simulation, using advanced computational technologies. Many applications require a discretized 2D geographic map such that local information can be accessed efficiently. For example, map matching, which aligns a sequence of observed positions to a real-world road network, needs to find all the nearby road segments to the individual positions. To this end, the map is discretized by …

High-Performance Testbed For Vision-Aided Autonomous Navigation For Quadrotor Uavs In Cluttered Environments, Shakeeb Ahmad

Electrical and Computer Engineering ETDs

This thesis presents the development of an aerial robotic testbed based on Robot Operating System (ROS). The purpose of this high-performance testbed is to develop a system capable of performing robust navigation tasks using vision tools such as a stereo camera. While ensuring the computation of robot odometery, the system is also capable of sensing the environment using the same stereo camera. Hence, all the navigation tasks are performed using a stereo camera and an inertial measurement unit (IMU) as the main sensor suite. ROS is used as a framework for software integration due to its capabilities to provide efficient …

Early Alert Of At-Risk Students: An Ontology-Driven Framework, Elias S. Lopez

Electrical and Computer Engineering ETDs

As higher education continues to adapt to the constantly shifting conditions that society places on institutions, the enigma of student attrition continues to trouble universities. Early alerts for students who are at-risk academically have been introduced as a method for solving student attrition at these institutions. Early alert systems are designed to provide students who are academically at-risk a prompt indication so that they may correct their performance and make progress towards successful semester completion. Many early alert systems have been introduced and implemented at various institutions with varying levels of success. Currently, early alert systems employ different techniques for …

Fundamentals Of Neutrosophic Logic And Sets And Their Role In Artificial Intelligence (Fundamentos De La Lógica Y Los Conjuntos Neutrosóficos Y Su Papel En La Inteligencia Artificial ), Florentin Smarandache, Maykel Leyva-Vazquez

Branch Mathematics and Statistics Faculty and Staff Publications

Neutrosophy is a new branch of philosophy which studies the origin, nature and scope of neutralities. This has formed the basis for a series of mathematical theories that generalize the classical and fuzzy theories such as the neutrosophic sets and the neutrosophic logic. In the paper, the fundamental concepts related to neutrosophy and its antecedents are presented. Additionally, fundamental concepts of artificial intelligence will be defined and how neutrosophy has come to strengthen this discipline.

Some Aggregation Operators For Bipolar-Valued Hesitant Fuzzy Information, Florentin Smarandache, Tahir Mahmood, Kifayat Ullah, Qaisar Khan

Branch Mathematics and Statistics Faculty and Staff Publications

In this article we define some aggregation operators for bipolar-valued hesitant fuzzy sets. These operations include bipolar-valued hesitant fuzzy ordered weighted averaging (BPVHFOWA) operator, bipolar-valued hesitant fuzzy ordered weighted geometric (BPVHFOWG) operator and their generalized forms. We also define hybrid aggregation operators and their generalized forms and solved a decision-making problem on these operation.

Application For Position And Load Reference Generation Of A Simulated Mechatronic Chain, Florentin Smarandache, V. Vladareanu, S.B. Cononovici, M. Migdalovici, H. Wang, Y. Feng

Branch Mathematics and Statistics Faculty and Staff Publications

The paper presents the position and load reference generation for a motor stand simulating a mechatronic chain, in this case a three degree of freedom robot leg. The task is accomplished using three PLC controlled motors in position as the robot joint actuators coupled with three controlled in torque, simulating the load at each simulation time-step. The paper briefly discusses the mathematical model and presents the visual interface used in the simulation, which is then to be further integrated into a virtual environment robot control application.

Prediction Of Graduation Delay Based On Student Characterisitics And Performance, Tushar Ojha

Electrical and Computer Engineering ETDs

A college student's success depends on many factors including pre-university characteristics and university student support services. Student graduation rates are often used as an objective metric to measure institutional effectiveness. This work studies the impact of such factors on graduation rates, with a particular focus on delay in graduation. In this work, we used feature selection methods to identify a subset of the pre-institutional features with the highest discriminative power. In particular, Forward Selection with Linear Regression, Backward Elimination with Linear Regression, and Lasso Regression were applied. The feature sets were selected in a multivariate fashion. High school GPA, ACT …

Packet Scheduling Algorithms In Lte/Lte-A Cellular Networks: Multi-Agent Q-Learning Approach, Najem Nafiz Sirhan

Electrical and Computer Engineering ETDs

Spectrum utilization is vital for mobile operators. It ensures an efficient use of spectrum bands, especially when obtaining their license is highly expensive. Long Term Evolution (LTE), and LTE-Advanced (LTE-A) spectrum bands license were auctioned by the Federal Communication Commission (FCC) to mobile operators with hundreds of millions of dollars. In the first part of this dissertation, we study, analyze, and compare the QoS performance of QoS-aware/Channel-aware packet scheduling algorithms while using CA over LTE, and LTE-A heterogeneous cellular networks. This included a detailed study of the LTE/LTE-A cellular network and its features, and the modification of an open source …

Distributed And Scalable Video Analysis Architecture For Human Activity Recognition Using Cloud Services, Cody Wilson Eilar

Electrical and Computer Engineering ETDs

This thesis proposes an open-source, maintainable system for detecting human activity in large video datasets using scalable hardware architectures. The system is validated by detecting writing and typing activities that were collected as part of the Advancing Out of School Learning in Mathematics and Engineering (AOLME) project. The implementation of the system using Amazon Web Services (AWS) is shown to be both horizontally and vertically scalable. The software associated with the system was designed to be robust so as to facilitate reproducibility and extensibility for future research.