Computer Engineering Commons^™

Arduino-Based High-Frequency Signal Data Acquisition For Learning Media On Antenna And Wave Propagation Practices, Eko Marpanaji, Masduki Zakarijah, Nikko Aji Bayu Nugraha

Elinvo (Electronics, Informatics, and Vocational Education)

This paper discusses the research results on the development of learning media and the results of the feasibility test for the learning process. This study aims to: (1) obtain the design and prototype of Arduino-based high-frequency signal data acquisition learning media; (2) find out the level of feasibility of learning media that has been made for the learning process of Antenna Practice and Wave Propagation courses. The research model uses Research and Development with the ADDIE development method. The research stages in the ADDIE method are Analyze, Design, Develop, Implement, and Evaluate. The research began with the development of learning …

Phone Microwave, Khanh Kim Hoang, Emily Zhou

Computer Engineering

This project involves the installation of remote-control capabilities in an antique 1980s microwave, effectively turning the microwave into a “smart” device. While preserving the original functionality of the microwave, a combination of software and hardware components allows for remote microwave operations. The microwave can be remotely operated by calling the built-in number, and more advanced settings and options can be utilized by texting. The microwave is also secured against unauthorized use with the addition of a PIN code that is required to operate the device.

Smart Surge Irrigation Using Microcontroller Based Embedded Systems And Internet Of Things, Prashant Dinkar Borhade

Graduate Theses and Dissertations

Surge Irrigation is a type of furrow irrigation and one of many efficient irrigation techniques. It is one of the economical techniques and requires minimum labor for monitoring it. In surge irrigation, water is applied intermittently to a field to achieve uniform distribution of water along the furrows, which is important while irrigating, as it ensures that there is enough water near the root zone of the crop. The uneven distribution can cause a loss in crop productivity.

Surge irrigation uses a surge valve, which is an electro-mechanical device that irrigates a field. The commercial surge valves available on the …

Dynamic Routing And Network Monitoring For The Polywog Protocol, Ryan Lawrence, Josh Pfeffer

Computer Science and Software Engineering

This document analyzes the implementation of dynamic routing for router nodes in a mesh network. It examines the algorithm used to populate both the minimum-distance and the routing tables. Furthermore, it describes the node configurations used for testing and applications for mesh networks.

Additionally, this document describes the implementation and testing of network monitoring in a mesh network. It discusses the steps used to forward active nodes in the network between router nodes, a gateway node, and a network monitor.

Lastly, this paper details our future plans for implementing additional features for a network monitor.

Autonomous Speed Control For Kia Optima, Andrew J. Combs, Kyle Fugatt, Kevin Mcfall

The Kennesaw Journal of Undergraduate Research

The standard method for speed control is the cruise control system built into most modern vehicles. These systems employ a PID controller which actuates the accelerator thus, in turn, maintains the desired vehicle speed. The main drawback of such a system is that typically the cruise control will only engage above 25 mph. The goal of this paper is to describe a system which we used to control vehicle speed from a stop to any desired speed using an Arduino microcontroller and a CAN BUS shield, from where autonomous features can be built upon. With this system, we were able …

Automation In Entertainment: Concept, Design, And Application, Ryan Thally

Undergraduate Honors Theses

The focus of this thesis is to explore the automation technology used in the modern entertainment industry. Upon completion of my thesis, I will deliver a working prototype of the chosen technology and present its capabilities in a choreographed show.

Sistem Monitoring Pencemaran Polutan Kendaraan Via Gadget Berbasis Arduino, Adibatul Ardianto

Elinvo (Electronics, Informatics, and Vocational Education)

Sumber polusi udara salah satunya adalah gas buang kendaraan bermotor, gas yang dihasilkan dari pembakaran bahan bakar terjadi pada mesin kendaraan. Tingkat deteksi aplikasi dari sistem pembuangan kendaraan bermotor yang dibuat digunakan untuk mendeteksi jumlah kadar gas H_2, gas EtOH dan gas CO dengan menggunakan sensor TGS2201. Data dari sensor diolah oleh arduino dan hasilnya ditampilkan pada PC melalui port serial, desain program aplikasi dengan menggunakan Bahasa C.

Stand, Lisa Yip

Computer Engineering

With busy lives, people sometimes forget to take breaks for multiple hours at a time. The purpose of this project is to remind the user to move around every hour if they have not already. To do so, stand will be a light weight fitness tracker that will detect the number of steps made within an hour. If the step count, dependent on goals, is not met then a vibration motor will gently remind them to take a break and walk. The data throughout the day will be shown on an iOS application where the user will be able to …

Conception, Design And Construction Of A Remote Wifi Vehicle Using Arduino, Clayton Broman

Physics

The scope of this senior project was to make a wireless vehicle controlled via Internet Protocol. This vehicle operates remotely and without direct line of sight. Commands are sent from a program running on a laptop and transmitted using a wireless router. Visual data is retrieved from a network camera, mounted on the vehicle, in real-time, to see where you are going.

Motohud: Intelligent And Safe Navigational Data Presentation For Motorcyclists, Drew Bentz, William Budney

Computer Engineering

The system uses a GPS (Global Positioning System) sensor, Bluetooth modem, and OLED (organic light-emitting diode) screen to display navigational information to a motorcycle rider. Currently supported navigational information are speed and heading, with a framework in place for future turn-by-turn navigation. The system is powered by a lithium-ion battery pack and controlled by an Arduino Micro. For turn-by-turn navigation, an Android powered smartphone running our Android App is required. Our system aims to reduce safety hazards from having to tilt or move one’s head when trying to view speed on a motorcycle speedometer, which is usually mounted down by …

Bluemote!, Philip Kaye

Computer Engineering

In today’s society, our mobile phones are an extremely useful device when we are on the go and away from our homes; however, when we return home, our smart phone becomes just a communication tool again. Home automation is inevitable, and it will find its way into every house. The first person to commercialize it to the point where it is as easy to set-up and as affordable as a home router will end up breaking this slow trend. The key to this success is the smart phone; this should end up being the most expensive piece of hardware for …

Global Positioning Logger, Matthew Hall

Computer Engineering

The Global Positioning Logger (GPL) is a mobile embedded device that utilizes GPS technology. The GPS data is used to display current speed and past global locations.