Civil and Environmental Engineering Commons^™

Performance Of Frp-Retrofitted Concrete Bridge Columns Under Blast Loading, R. Zheng, P. Zohrevand, H. Erdogan, Amir Mirmiran

Civil Engineering Faculty Publications and Presentations

Contrary to military or essential government buildings, most bridges are designed without any consideration for blast resistance. Fiber-reinforced polymers (FRPs) can provide an effective means for strengthening of critical bridges against such loading. This study has focused on the effectiveness of FRP retrofitting in the dynamic response of reinforced concrete bridge columns under blast loading. Using a simplified equivalent I-section with a virtual material lumped at the two flanges; a lightly meshed uniaxial finite element model was developed and successfully validated against previous studies. The proposed model was then used for a thorough parametric study on the blast resistance of …

Heat Transfer Characteristics Of Ggbs Concrete In Fire, Ted Mckenna, Mark G. Richardson, Brian O’Rourke

Publications

Partial replacement of high clinker content cements by Ground Granulated Blastfurnace Slag (GGBS) can reduce the carbon footprint of concrete, with consequent benefits in respect of sustainable construction. Furthermore a state-of-the-art report indicated that use of GGBS as a binder replacement may increase the fire resistance of concrete. If so this could lead to thinner sections in fire compartment elements, especially non-loadbearing walls, leading to further gains in respect of sustainable development. Concrete is considered an effective material in protecting against the detrimental effects of fire in structures. However, exposure to high temperatures can degrade concrete performance. Fire resistance performance …

A Critical Review Of Research On Reuse Of Mechanically Recycled Frp Production And End-Of-Life Waste For Construction, Ardavan Yazdanbakhsh, Lawrence C. Bank

Publications and Research

For the last three decades, fiber reinforced polymer (FRP) composite materials have been widely used in major engineering industries. Managing FRP waste is becoming an important issue due to the growth in the production of FRP composite materials. In this article, the issue of FRP waste management is discussed and the commonly used methods for the handling of FRP waste are reviewed. One potentially viable use of FRP waste is in the partial replacement of fillers or aggregates in cementitious materials (particularly portland cement mortar and concrete). A number of important prior investigations performed on the use of FRP waste …

Electrochemical-Mechanistic Model For Concrete Cover Cracking Due To Corrosion Initiated By Chloride Diffusion, Goli Nossoni, Ronald S. Harichandran

Civil Engineering Faculty Publications

A holistic electrochemical-mechanistic model of the corrosion of steel reinforcing bars inside concrete that accounts for the diffusion of oxygen and moisture into the concrete and rust layers, the densification of rust due to confinement, the flow of rust into the concrete pores, the development of internal pressure due to rust buildup, and cracking of the concrete cover is presented. The relationship between the corrosion current and the pressure buildup due to the corrosion products for different concrete cover thicknesses and concrete quality was calibrated through experiments using an accelerated corrosion test with an applied current. Results from finite-element analysis …

Study On Surface Permeability Of Concrete Under Immersion, Jun Liu, Feng Xing, Biqin Dong, Hongyan Ma, Dong Pan

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this paper, concrete specimens are immersed in ultrapure water, to study the evolutions of surface permeability, pore structure and paste microstructure following the prolonging of immersion period. According to the results, after 30-day immersion, the surface permeability of concrete becomes higher as compared with the value before immersion. However, further immersion makes the surface permeability decrease, so that the value measured after 150-day immersion is only half that measured after 30-day immersion. The early increase in surface permeability should be mainly attributed to the leaching of calcium hydroxide, while the later decrease to the refinement of pore structure due …

Mechanical And Transport Properties Of Alkali-Activated Natural Pozzolans As Sustainable Binders, Brittany Radke

Calvert Undergraduate Research Awards

OPC production accounts for 5 to 7% of the global carbon dioxide (CO₂) emissions, contributing to global warming. The desire to reduce CO₂ emissions and produce more durable concrete has given impetus to search for new binders. It is suggested that alkali-activated natural pozzolans have the potential for use as a sustainable replacement for OPC in concrete.

The current study presented herein evaluated fresh, mechanical, and transport properties of alkali-activated natural pozzolan mortars containing various concentrations of sodium hydroxide solutions as an alkaline activator. To this aim, alkali-activated natural pozzolan mortars were made with concentrations of sodium …