Civil and Environmental Engineering Commons^™

Development And Deployment Of Aluminum Bridge Decks, Ching Chiaw Choo, Abheetha Peiris, Issam E. Harik

Issam E. Harik

This report contains the analysis and retrofit of a steel truss bridge on KY 974 over Howard Creek in Clark County, Kentucky. The bridge had major corrosion and damage to the steel stringers, along with cracking and leaching occurring in the concrete bridge deck. The retrofit involves the replacement of the corroded steel stringers and the damaged concrete bridge deck. The original concrete deck was removed and replaced by light-weight high-strength aluminum deck panels. The aluminum deck panels, each 2-m wide, were assembled at the site and connected to each other and to the bottom steel stringers using special clamps …

Implementation Of Remote Sensing Technology On The I-64 Bridge Over Us60, Issam Harik, Ching Choo, Abheetha Peiris, Dan Eaton

Issam E. Harik

Remote sensing devices have been implemented on the I-64 Bridges over US60 in Franklin County, KY. One of the girders in the westbound bridge has been previously repaired due to unexpected fatigue cracking. The exterior girder in the eastbound bridge has shown signs of impacts due to the traversing trucks on US60. Sensing and recording devices such as strain and temperature gauges, infrared sensors, ultrasonic height detectors, and an accelerometer have been installed. Specifically, eleven strain gauges are used on the repaired girder, impacted girders, and girders adjacent to them. Two sets of infrared sensors, ultrasonic detectors, and video cameras …

Detailed Seismic Evaluation Of Bridges On And Over The Parkways In Western Kentucky, Jian Xie, Issam Harik, Tong Zhao

Issam E. Harik

This report outlines a rating system and details an evaluation procedure for the seismic evaluation of highway bridges. These processes are later used to investigate the structural integrity of selected highway bridges on and over the parkways in Western Kentucky. A total of 349 bridges were rated with the bridge ranking system, and 17 were selected for detailed seismic evaluation.

The capacity/demand ratio method developed by the Federal Highway Administration is employed for the detailed evaluation of bridges. The evaluation involves creating three-dimensional finite element models for all 17 bridges. Dynamic analysis is performed for a projected 250-year event. Among …

Repair Of I-65 Expressway Bridges Using Carbon Fiber Reinforced Polymer (Cfrp) Composites, Ching Chiaw Choo, Abheetha Peiris, Issam E. Harik

Issam E. Harik

This report documents the repair of five locations along the I-65 Expressway in Jefferson County, KY. The repair involved: (1) the precast prestressed concrete girder spans between Jacob Street and Gray Street, (2) the reinforced concrete bearing pads of Bridge Pier 4 at the intersection of Jefferson Street and Preston Street, (3) the reinforced concrete bearing pads of Bridge Pier 6 near the intersection of Main Street and Hancock Street, (4) the precast prestressed concrete girder spans between Chestnut Street and Gray Street and (5) the reinforced concrete pier column on East Muhammad Ali Blvd.

The precast prestressed concrete girders …

Shear Repair Of P/C Box Beams Using Carbon Fiber Reinforced Polymer (Cfrp) Fabric, Jim Simpson, Issam Harik, Choo Chiaw

Issam E. Harik

The report documents the retrofit work carried out on the KY3297 Bridge over Little Sandy River in Carter County, Kentucky. Field investigation and evaluation revealed that the bridge superstructure was deficient in shear. The repair work was carried out using externally bonded carbon fiber reinforced polymer (CFRP) fabric system. The repair, using externally bonded fiber system, offers the following benefits: (1) the use of light construction equipment, hand kits and tools, (2) minimal traffic disruption as all lanes were open to traffic while work was being performed underneath the bridge, and (3) cost saving; the cost for the repair and …

Repair Using Steel Fiber Reinforced Polymer On Us 150 Bridges, Ching Chiaw Choo, Abheetha Peiris, Issam Harik

Issam E. Harik

The report details the pre-construction monitoring, planning and design, and construction of the retrofit measures on the US150 bridge over Beech Fork River in Nelson County, KY and Cartwright Creek bridge on the border of Washington-Nelson County, KY. All reinforced concrete girders of the five-span Beech Fork River bridge and three-span Cartwright Creek bridge of deck-girder construction had developed diagonal cracks near or at the transition of the variable-and-constant depth regions.

To remedy the problem steel fiber reinforced polymer (SFRP) sheets were selected as the means of retrofit due to their strength and stiffness, as well as conformability and flexibility. …

Multi-Barge Flotilla Impact Forces On Bridges, Peng Yuan, Issam Harik, Michael Davidson

Issam E. Harik

The current AASHTO equations for barge impact loads are based on scale models of barges, and may not accurately predict impact loads on bridge piers. The results of this study produce more realistic flotilla impact design loads, potentially leading to a reduction in construction costs of bridges over navigable waterways. The objectives of this study are: (1) To conduct theoretical finite element analysis on various types of flotillas impacting bridge piers. The flotillas and the respective barges will be of the type commonly traversing Kentucky’s waterways; and (2) To generate design equations for barge/flotilla impact loads. The study concludes the …

Equivalent Barge And Flotilla Impact Forces On Bridge Piers, Peng Yuan, Issam Harik

Issam E. Harik

Bridge piers located in navigable inland waterways are designed to resist impact forces from barges and flotillas in addition to other design considerations (e.g., scour, dead and live loads, etc.). The primary design tool for estimating these forces is the AASHTO Guide Specification which provides a simple hand calculation method for determining an “equivalent impact force”. The simplicity comes at a cost of excluding the effect of the pier shape, impact duration, and interaction between barges in a flotilla. The objective of this report is to present a hand calculation method for determining barge or flotilla equivalent static impact forces …

Evaluation Of Accelerated Bridge Construction Methods And Designs In The State Of Iowa, Matthew Fred Becker

Matthew Becker

Accelerated bridge construction (ABC) is the general term given to a variety of approaches aimed at reducing construction durations of bridge projects. Using these approaches on bridge projects introduces a number of advantages including reduced traffic disruption and increased safety. This thesis is comprised of two papers that focus on a number of ABC projects completed in the state of Iowa in the last decade. The first paper highlights the construction aspects of these projects and gives an evaluation of the projects based on criteria related to rapid construction and gives a comparison of the project cost to non-ABC projects. …