Civil and Environmental Engineering Commons^™

Effect Of Waste Covid-19 Masks On Compaction Characteristics Of Silty-Clay Soil, Sydney K. Lawson

Honors College Theses

The present study aims to explore the effect of adding shredded waste Covid-19 masks to silty-clay soil on the soil’s compaction characteristics for beneficial use in embankment, the subgrade of roadways, or backfill. This was accomplished by using two different types of masks: blue surgical masks and KN95 masks. Both mask types were hand shredded into half-inch sections using safety-scissors. The maximum dry density (MDD) and optimum moisture content (OMC) are the two most important compaction characteristics, and they were determined by the Standard Proctor Compaction Test (ASTM D698 / AASHTO T99). The change of both the MDD and OMC …

Evaluation Of Beach-Fx — Beach Nourishment Planning Model – Miami Beach Case Study, Brennan Chase Banks

Theses and Dissertations

Miami Beach, located on the Southeast coast of Florida, is a concerning location for coastal erosion because of the increasing intensity and frequency of tropical storms, nuisance flooding, and accelerated sea-level rise due to climate change. Miami Beach is famous for its beautiful beaches, making it a location of high interest for tourists, citizens, and investors. It is vital for coastal practitioners to accurately model coastal processes, beach evolution, and storm damage during the planning stage of coastal protection projects. The U.S. Army Corps of Engineers developed the Beach-fx model as a tool for engineers, planners, and economists to …

Optimizing Anaerobic Digestion Of Food Waste And Industrial Sludge For Biogas Production, Emma R. Murray

Honors College Theses

Food waste is a major contributor to municipal solid waste, and its disposal at landfills has significant environmental and economic impacts. Opportunities need to be identified for the sustainable management of food waste at large scales. Pulp and paper mills throughout the country commonly use anaerobic digestion to treat their waste sludge; however, this sludge can consist of over 50% lignin, which is slowly or negligibly digested. This research aims to explore the sustainability of co-digestion of food waste and paper mill sludge. Lab-scale studies were used to assess the feasibility of anaerobic digestion by measuring treatment efficiencies and biogas …

The Effects Of Phoslock And Water Treatment Residual On Phosphate Concentration Levels And Phosphate Adsorption, Anna Soehnlen

Williams Honors College, Honors Research Projects

Eutrophic, nutrient enriched water can induce adverse effects like harmful algal blooms (HABs) in aquatic ecosystems. Numerous studies have been conducted to control nutrients like phosphorus and nitrogen in order to mitigate the growth rate of HABs. During the spring semester of 2023, a research project investigated if the bentonite clay product, Phoslock, was able to remove phosphorus when it was added to distilled water and surface water under laboratory conditions. The researchers noted potential deficiencies in Phoslock’s ability to decrease the concentration of phosphorus while maintaining the initial value of adsorbed phosphorus. Expanding from this past research, two additional …

Simulation Of Wave Propagation In Granular Particles Using A Discrete Element Model, Syed Tahmid Hussan

Electronic Theses and Dissertations

The understanding of Bender Element mechanism and utilization of Particle Flow Code (PFC) to simulate the seismic wave behavior is important to test the dynamic behavior of soil particles. Both discrete and finite element methods can be used to simulate wave behavior. However, Discrete Element Method (DEM) is mostly suitable, as the micro scaled soil particle cannot be fully considered as continuous specimen like a piece of rod or aluminum. Recently DEM has been widely used to study mechanical properties of soils at particle level considering the particles as balls. This study represents a comparative analysis of Voigt and Best …

Functional Cementitious Composites With Micro-Sized Particulate Fillers For Additive Construction And Energy-Efficient Buildings, Adam Brooks

Doctoral Dissertations

With a growing energy demand, the development of sustainable and energy efficient building materials is growing rapidly. Numerous researches have focused on low carbon footprint construction materials, high-performance thermal insulations, high-performance façade, and thermal energy storage. Among these, the development of functional cementitious composites has attracted significant attention due to its potential utilities in building energy reduction and decarbonatization efforts. For example, fly ash cenospheres have been used as micro-size lightweight fillers to achieve low density and thermal conductivity. The use of phase change materials (PCM) in concrete has been studied to answer energy demands. While their inclusion into concrete …

Feasibility Of Using High-Alkali Natural Pozzolans And Reclaimed Fly Ash As Alternative Supplementary Cementitious Materials In Concrete, Weiqi Wang

All Dissertations

Due to the shortage of supplementary cementitious materials (SCMs) in the concrete industry, it is necessary to seek a new alternative. This study evaluates the feasibility of high-alkali SCMs, which were not recommended previously due to potentially exacerbating alkali-silica reaction (ASR) in concrete. The study addresses theSCMs’ ASR mitigation performance, evaluated by ASTM C1567, C1293, and AASHTO T380. Other concrete durability tests, including ASTM C596 drying shrinkage test, ASTM C1012 sulfate resistance test, and ASTM C1202 rapid chloride ions penetration test, were also conducted in this study. The ASTM C311 strength activity index test, thermal gravimetric analysis (TGA), and ASTM …

Effects Of Perforations On Internal Cathodic Protection And Recruitment Of Marine Organisms To Steel Pipes, Alexander John Paluzzi

Theses and Dissertations

Steel monopile support structures for offshore wind turbines require protection from corrosion on their external and internal surfaces. Cathodic protection (CP) works effectively to protect the external surfaces of monopiles, but internally, byproducts from aluminum sacrificial anode CP (SACP) and impressed current CP (ICCP) induce acidification that accelerates steel corrosion. This project investigated the effects of perforations on the performance of aluminum SACP and ICCP when used inside of steel pipes. Additionally, marine growth on the external and internal surfaces of the pipes was assessed to determine if CP byproducts affect marine organism development.

Two sealed and two perforated steel …

Understanding The Flow Dynamics Of The Pearl River, Ms, Through Hydrodynamic Modeling, Nahruma Mehzabeen Pieu

Master's Theses

The Pearl River brings fresh water and nutrients into Lake Borgne regulating conditions for oyster growth in estuarine waters. However, there are no flow measurement stations installed on East Pearl or West Pearl either at the river outlets or after the upstream bifurcation of the Pearl. This study aims to model the Lower Pearl River to understand the flow dynamics in the major branches, and to determine the final outflow distribution into the Mississippi Sound, aiming to improve river forcing for ocean models studying estuarine dynamics of the Mississippi Sound.

Synthetic meandering bathymetry with updated banks is developed and applied …

Enhancing Construction Safety Training Of Bridges Using Augmented Reality And Virtual Reality, Mohamed Sherif Elrifaee

Theses and Dissertations

Infrastructure development projects are widely acknowledged as some of the most complex and challenging projects to undertake. The construction of bridges, in particular, has proven to be a significant safety risk for workers, with a considerable number of accidents reported on construction sites. There is a lack of comprehensive training programs specifically designed for bridge construction safety, and only a few studies have explored the use of both AR and VR to enhance safety training in construction. As such, this research aims to improve the safety of bridge construction sites through the implementation of Augmented Reality (AR) and Virtual Reality …

Remote Sensing And Artificial Intelligence-Based Modeling And Prediction Of Harmful Algal Blooms In Lake Pontchartrain, Ian Smith

LSU Master's Theses

Harmful Algal Blooms (HABs) and particularly toxic cyanobacterial harmful algal blooms (CyanoHABs) have become a growing threat to the environment, economy, communities, and human and animal health. This is particularly true for Lake Pontchartrain. Forecasting the occurrence of cyanobacterial HABs in Lake Pontchartrain is a process that currently does not exist, as nowcasting by the NCCOS Algal Bloom Monitoring System or the similar system implemented by the U.S. EPA is currently the only method to monitor HAB production in the Lake. This thesis made this process possible by identifying antecedent environmental conditions controlling CyanoHABs, describing the conditions using NASA satellite …

Behavioral Comparison Of Fluorescent Tracer Sediment To Lightweight Polystyrene Sediment Of The Lower Mississippi River Physical Model (Lmrpm), Julia C. Mudd

LSU Master's Theses

A lightweight, unexpanded polystyrene sediment with a specific gravity of 1.05 and a D10, D50 and D90 of 0.250 mm, 0.425mm, and 0.800 mm, respectively, is utilized in the Lower Mississippi River Physical Model (LMRPM) at Louisiana State University to mimic the sand transport of the Lower Mississippi River. While the black model sediment is easily visible against the stark white of the LMRPM, the relative homogeneity of the sediment particles and the opaqueness of the model channel make it difficult to closely study sediment dynamics during an experiment. For this reason, a tracer sediment that is marked with fluorescence …

Integrating Steel Slag Aggregates Into Asphalt Paving By Harmonizing Availability, Quality, Economics, And The Environment, Timothy R. Murphy

Theses and Dissertations

This thesis provides guidance on how to balance matters related to the environmental stewardship, market sources, origin and uses, material properties, performance, and economic impact of using slag materials in pavements. The literature on this topic provides numerous references on the use of slag materials for specific applications, and this thesis aims to make use of those references along with other data from the author to describe slag materials from a holistic perspective and provide some suggestions for balancing several factors that impact optimal use of this resource within pavement structures. Discussion is given to the increased importance of recycling …

Historic Downtown Streetscape Plan Price City, Utah, Patricia Beckert

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The idea of a small-town Main Street has profound meaning within the American culture that has prevailed for the past two centuries. Historically, Main Street serves as the beating heart of a community, a place where economic, social, cultural, and civic activities are centered (Francaviglia, 1996; Main Street America, n.d.). Since the beginning of the 19th century, many factors have led to the decline of Main Streets, and despite a variety of efforts from different stakeholders, that decline has only intensified in recent decades (Isenberg, 2008; Orvell, 2014 Howard, 2015). In 1980, after a three-year project conducted by the National …

Explaining Spatio-Temporal Evolution Of Extreme Hydro-Climatic Events Using A Complex Network Framework, Somnath Mondal

All Dissertations

Severe hydroclimatic extreme events, such as droughts, heatwaves, and heavy rainfall, are occurring with increasing frequency and causing significant impacts on both people and the environment. These events also compound in space and time, leading to even more significant consequences. Therefore, it is essential to comprehend these phenomena' concurrent and time-delayed progression across different temporal and spatial scales to address adaptation and mitigation effectively. To accurately understand and map the co-evolution of extreme events, it's necessary to have a thorough grasp of their spatiotemporal patterns, how they propagate and interact with one another, and the underlying mechanisms driving their occurrence. …

Numerical Flume For Wave Dissipation By Mangrove Prop Roots, Rebecca L. Schurr

LSU Master's Theses

Mangroves provide shorelines with many beneficial engineering services, including shoreline stabilization, wave attenuation, and damage mitigation during tsunami or tropical cyclone events. This research focuses on wave attenuation rates and drag coefficients, and how they are affected by mangrove prop roots. Previous lab research using a physical wave flume has quantified wave height decay and drag coefficients for synthetic mangrove forests and confirmed that attenuation does indeed increase as mangrove forest density increases. This research will use a 3D numerical flume model developed in Proteus, a Python package, to simulate prior physical model experiments. This work will attempt to validate …

Additive Manufacturing Of Engineered Cementitious Composites With Ultra-High Tensile Ductility, Amir Bakhshi

Civil Engineering ETDs

One of the critical factors in the development of additive manufacturing in the construction industry is designing suitable materials for 3D printing applications. 3D concrete printing (3DCP) has gained significant attention due to the abundance and availability of concrete. However, concrete is a brittle material and, without proper reinforcement, cannot meet the requirements for structural purposes. Engineered Cementitious Composites (ECC), known for high ductility, and strain-hardening with low fiber contents, can potentially eliminate the need for steel reinforcement in 3D printing without any need for manual placement of reinforcement. A set of systematic tests on ECC mix designs' fresh and …

Effects Of Wind Turbine Rotor Positioning On Tornado Induced Loads, Juan P. Lopez Ortiz

Electronic Thesis and Dissertation Repository

This study investigates the loads induced by a large-scale tornado simulation on a horizontal axis wind turbine (HAWT) to assess the influence of three-dimensional flows with respect to the HAWT position. The loads were analyzed under two rotor operational conditions, idling and parked, at five radial distances. Subsequently, experimental validation of the numerical code HIW-TUR was conducted by evaluating the induced moments for various yaw and pitch angles. The experimental results demonstrated that the bending moment was the most important in terms of magnitude and variation with respect to the HAWT position. Furthermore, The HIW-TUR code accurately identified the magnitude …

Water Resources Planning Under Deep Uncertainty For Physically, Socially, And Politically Complex Systems, Sarah St. George Freeman

Doctoral Dissertations

Water supply systems, particularly those of large cities, are complex systems linking supply, regulatory and distribution infrastructure, and points of use. Despite their physical complexities, it is infrequent that full supply, distribution, end use, and feedbacks therein are considered in an integrated manner. These complex systems-of-systems face large uncertainties related to physical aspects such as degradation of infrastructure, changing demand, and climate variability and change. Though great, such physical uncertainties often pale in comparison to the those related to the human systems in place to manage them and yet uncertainty in the decision-making landscape is often grossly simplified in our …

Phosphorus Release And Recovery From Simulated Ferric Wastewater Sludge, Aseel Alnimer

Theses and Dissertations (Comprehensive)

Phosphorus (P) is a fundamental element necessary for all life forms and a key component in the fertilizer industry. Meanwhile, the excessive load of P to water bodies due to human activities has the potential to promote eutrophication. Wastewater treatment plants remove P either biologically or chemically and produce P rich sludge which could be a potential renewable source for P. At present, commercial technologies exist for P recovery from biological wastewater sludge. However, P recovery from chemical sludge particularly iron(III)-phosphate (Fe-P) sludge generated in chemical P removal plants that use iron(III) salts remains a challenge.

This study explored, in …

Investigating The Change In Pavement Cracking Data Due To Automated Data Collection Methods, Faisal Quibria Chowdhury

Graduate Theses, Dissertations, and Problem Reports

Data collection on pavement surface cracks is crucial for the state Departments of Transportation (DOTs) to make informed decisions on maintenance, repair, and rehabilitation (MR&R) activities. The collected cracking data is translated into a pavement performance indicator to assess the condition of pavement sections and identify MR&R needs based on predetermined threshold values set by the state DOTs. State DOTs have transitioned from manual to automated data collection as automation offers many advantages over manual data collection, such as improved data collection rates, efficiency, cost reduction, and safety. As the state DOTs have integrated automated data into the pavement performance …

Application Of Metagenomic And Molecular Microbiology Techniques To Elucidate Sources Of Fecal Pollution And Anthropogenic Antibiotic Resistance Genes To Surface Water: A Step Towards A “One Health” Approach To Watershed Management, Mehedi Hasan Tarek

Graduate Theses, Dissertations, and Problem Reports

The use of fecal indicator bacteria, such as Escherichia coli, is a widely established regulatory and monitoring practice to detect surface water contamination associated with fecal pollution. However, the detection or quantification of fecal indicator bacteria alone does not accurately inform the sources of fecal pollution. The development of molecular and metagenomic methods that target the DNA of microorganisms has resulted in a host of new tools for monitoring fecal pollution and its sources, as well as for understanding emerging microbial threats, such as antimicrobial resistance. Antimicrobial resistance is a critical “One Health” challenge presenting a high risk to …

Mixing, Metabolism, And Climate Change: A Modeling Case Study Of A Shallow Hypereutrophic, Polymictic Lake, Benjamin C. Reuss

Dissertations, Master's Theses and Master's Reports

Globally, lakes are sites of significant carbon cycling, respiring an estimated 0.07 to 0.15 Pg as CO2 and sequestering 0.03 to 0.07 Pg C in sediments annually. These processes can be affected by nutrient availability, with seasonal mixing regulating nutrient transport in monomictic and dimictic systems. However, the effect of intermittent mixing on ecosystem production in polymictic systems has been much less studied. The timing and frequency of lake mixing are expected to be altered by climate change, which has the potential to impact nutrient transport. The first chapter of this thesis introduces lake mixing dynamics and indices of mixing. …

Evaluation For Using Expended Bioelectrochemical Systems As Soil Amendments For Improved Corn Plant Growth And A Drought Resistant Soil., Jackson Lee Sauers

Theses and Dissertations

A long-held practice is to mix agricultural soil with a soil amendment to improve growing conditions in crops. A common soil amendment is biosolids produced from both municipal and dairy wastewater due to the macro- and micronutrients within it. Both the agricultural and wastewater industries are participating in the Circular Economy concept (CEC). Two experiments explored using expended bioelectrochemical systems (BES) that treated either synthetic dairy wastewater (DWW) or synthetic municipal wastewater (SWW) as soil amendments to improve corn plant growth when treated with three different nutrient treatments: 100%- 50%- and 0% Hoagland Nutrient Solutions. Biochar and used terracotta clay …

Fundamental Investigation Of Interaction Between Moisture And Asphalt-Aggregate Systems, Rui Xiao

Doctoral Dissertations

Moisture-induced damage is one of the most common forms of flexible pavement distress which directly causes or exacerbates pavement failure. The intrusion of moisture into the asphalt pavements reduces the overall mechanical properties of the locking structures and gives rise to one or more of the visible forms of distress such as raveling, stripping, permanent deformation and fatigue cracking. This doctoral study is aimed at understanding the detrimental action of water on the asphalt-aggregate systems and the damage mechanism by multi-technique investigation. A thermodynamics framework was considered to characterize the properties of asphalt mix ingredients as well as the engineering …

Erosion And Resuspension Of Cohesive Sediments In Coastal Louisiana, Laith Qasem Shamaileh

University of New Orleans Theses and Dissertations

The research presented in this study is motivated by the need to improve the predictions of cohesive sediment erosion and subsequent transport. In addition, the knowledge of the geotechnical engineering soil properties related to the erosion of sediments in coastal Louisiana has broad implications as these properties are used in transport models guiding the current restoration efforts. The erosion measuring device used in the study is the Cheng-Han Tasi and Wilbert Lick Shaker. Previous studies have been conducted before using the Shaker, but challenges with the calibration of the shear stress hampered the resuspension results produced by the Shaker. Therefore, …

Active Rheological And Stiffening Control Of Cementitious Systems For Additive Manufacturing, Abdul Basit Peerzada

All Dissertations

Technological advancements and automation in the last two decades have made additive manufacturing of cementitious systems a reality. Among all the additive manufacturing techniques used for cementitious materials, layer-by-layer extrusion-based printing is the most used technique. For a layer-by-layer printing process, the requirements of cementitious materials vary from those of a conventional construction process. Typically, the cementitious materials are pumped to a print head using a positive-displacement pump. The pumpability of the cementitious material for a specific pumping system depends on its rheological properties. For effective pumping, the yield stress and plastic viscosity of a cementitious system should be low. …

Project Selection In Facility And Infrastructure Maintenance Organizations, Bayram M. Kurbanov

Theses and Dissertations

The current Air Force Civil Engineer Center (AFCEC) built infrastructure Facility Sustainment Restoration and Modernization (FSRM) portfolio management methodology results in an unbalanced project portfolio. The consequence of this unbalance is that majority of the funding goes towards buildings on the flightline and Facility Support Services activities do not get adequate funding which leads to further deterioration of those facilities. This research investigates whether decision support framework based on Value-Focused Thinking (VFT) process yields better project selection outcomes for facility and infrastructure maintenance organizations. To accomplish that, the investigation focuses on understanding current AFCEC decision support methodology, building an alternative …

Behavior Of Novel Cementitious Composites For Use In Sustainable Construction And Rehabilitation, Noah A. Thibodeaux

Dissertations

Cementitious composites are a class of cement-based materials that incorporate a cement paste and other constituents to form a composite material. Cementitious composites may include coarse and/or fine aggregate, admixtures, supplementary cementitious materials (SCMs), or fibers in order to achieve a desired workability, strength, or durability property.

Recently, material scientists and engineers have developed a variety of novel cementitious composites for the purpose of new construction, rehabilitation, and reconstruction applications. Such materials can be used to improve the sustainability of civil infrastructure through the use of recycled, repurposed, or low-embodied carbon materials. Since many of the qualification standards and tests …

Using 2d Hec-Ras Modeling With Vertical Feature Extraction To Inform Ecological Design In The Lower Atchafalaya River Basin, Louisiana, Colin Anderson

LSU Master's Theses

A 2D HEC-RAS model was created to demonstrate applications of hydraulic modeling for informing ecological design. This was done by comparing the hydrologic conditions of a baseline year (2010) to that of the environmental flow prescription from Kozak et al. (2016). The inundation results are relevant to hydraulic connectivity and cypress regeneration.

The hydraulic model was created by assimilating numerous data sources, refining the model with vertical feature (VF) extraction, and calibrating/validating the model. Several topo-bathymetric sources were combined to create the digital elevation model (DEM). Most importantly, this included bathymetry of the backswamp. Polylines of significant VFs in the …