Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 9 of 9

Full-Text Articles in Civil and Environmental Engineering

Performance Of Helical Piles Retrofitted With A Novel Collar Vane Under Lateral And Torsional Loads, Juan Sebastian Carvajal Munoz May 2023

Performance Of Helical Piles Retrofitted With A Novel Collar Vane Under Lateral And Torsional Loads, Juan Sebastian Carvajal Munoz

Electronic Theses and Dissertations

Helical piles are lightweight deep foundations designed to support both compressive and uplift loads by mobilizing the shear strength of soil adjacent to helical plates that are welded to an extendable shaft. Helical piles are relatively inexpensive, can be installed quickly utilizing non-specialized equipment, and they are suitable for a wide range of soil conditions. However, helical piles are precluded from many applications due to their inability to support substantial lateral and torsional loads. To overcome this limitation, a novel easy-to-install Collar Vane is implemented to augment the lateral and torsional capacity of helical piles.

The Collar Vane consists of …


Cyclic Behavior Of Laterally Skewed Special Moment Frame Connections: Experimental Testing And System-Level Analyses, Mohammad Hossein Kashefizadeh May 2022

Cyclic Behavior Of Laterally Skewed Special Moment Frame Connections: Experimental Testing And System-Level Analyses, Mohammad Hossein Kashefizadeh

Graduate Theses and Dissertations

Special moment frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs. SMFs provide lateral system stiffness without the use of braces that often obstruct views and architectural features. Current American Institute of Steel Construction (ASIC) provisions (AISC 341-16) provide prequalified SMF connection details; however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF beam-to-column connections. The study presented herein involves system-level dynamic time-history analyses of skewed SMF connections, the analytical component-level investigation into the effect of the concrete slab on behavior of the …


Guidelines For Designing The Overhead Transmission Tower Foundations Adjacent To Cohesionless Slopes, Meshel Q. Alkahtani Nov 2021

Guidelines For Designing The Overhead Transmission Tower Foundations Adjacent To Cohesionless Slopes, Meshel Q. Alkahtani

Electronic Thesis and Dissertation Repository

Foundations supporting electrical transmission line towers are subjected to oblique loading due to tower own weight along with wind loading. Due to land limitation and linear alignment of transmission lines, many power transmission towers are situated in sand near sloping grounds and proper evaluation of their foundation performance is essential for the safety and reliability of the critical power transmission lines. There is currently no guidance available on the behaviour of transmission towers foundations constructed near slopes. Thus, the primary objectives of this study are to evaluate the response of transmission tower foundations in cohesionless sloping grounds and investigate the …


Ultimate And Serviceability Limit States Of Large Shallow Foundations Under Combined Loading, Pengpeng He Sep 2020

Ultimate And Serviceability Limit States Of Large Shallow Foundations Under Combined Loading, Pengpeng He

Electronic Thesis and Dissertation Repository

Estimation of the bearing capacity and deformations of large shallow foundations under combined loadings can be of great significance. Some geotechnical design guidelines recommend the failure load envelope method for ultimate limit state analysis. Since many investigations of this method focus primarily on undrained failure envelopes using unlimited-tension interfaces, zero-tension interfaces have not been well investigated. In addition, less work is available on drained failure envelopes. For serviceability limit states, the majority of approaches used are based on uncoupled, isotropic assumptions. Further work needs to be done on more appropriate elastic solutions for combined loadings.

General VHMT failure envelopes for …


Development Of Multi-Axial Fatigue Retrofits For Lock Gate Components, Logan Verkamp May 2020

Development Of Multi-Axial Fatigue Retrofits For Lock Gate Components, Logan Verkamp

Graduate Theses and Dissertations

Lock gates are essential infrastructure components to the United State (US) supply chain. They create large cost savings and environmental benefits when compared with traditional methods of transport (freight and rail). Because of the large quantity of goods and dependence on these shipping chains, the US economy can be drastically affected by an unexpected gate closure. Unfortunately, many lock gates within the US have reached or exceeded their designed life. Due to the intensity of cyclic loads and the environment, fatigue cracks have become a prominent issue. Developed cracks near the pintle region (a joint which the gate rotates and …


Analytical And Numerical Modeling Of Cavity Expansion In Anisotropic Poroelastoplastic Soil, Kai Liu May 2019

Analytical And Numerical Modeling Of Cavity Expansion In Anisotropic Poroelastoplastic Soil, Kai Liu

LSU Doctoral Dissertations

Cavity expansion/contraction problems have attracted intensive attentions over the past several decades due to its versatile applications, such as the interpretation of pressuremeter/piezocone penetration testing results and the modelling of pile installation/tunnel excavation in civil engineering, and the prediction of critical mud pressure required to maintain the wellbore stability in petroleum engineering. Despite the fact that various types of constitutive models have been covered in the literature on this subject, the soils and/or rocks were usually treated as isotropic geomaterials.

In recognition of the above fact, this research makes a substantial extension of the fundamental cavity expansion theory by considering …


Performance Of Concrete Tunnel Systems Subject To Fault Displacement, Michael Morano Mar 2019

Performance Of Concrete Tunnel Systems Subject To Fault Displacement, Michael Morano

Masters Theses

A Finite Element Analysis (FEA) investigation of concrete tunnel systems traversing seismic faults is carried out to determine how to effectively mitigate the stresses induced in the liner when subject to fault displacement. A parametric study of various fault parameters, both in the damage zone and competent rock, is carried out to determine the site conditions which induce the most stress on the tunnel liner system. Results indicate that friction angle, cohesion, and elastic modulus of fault zones have varying effects on the stresses induced on the liner. The width of damage zone and expected displacements are also investigated and …


Performance Of Hollow Bar Micropiles Under Axial And Lateral Loads In Cohesive Soils, Ahmed Yehia Abd El-Aziz Jun 2012

Performance Of Hollow Bar Micropiles Under Axial And Lateral Loads In Cohesive Soils, Ahmed Yehia Abd El-Aziz

Electronic Thesis and Dissertation Repository

The use of hollow core bars in micropiles has greatly increased over the past ten years. Hollow core construction, also known as “self drilled”, is becoming a popular option because it allows a faster installation processes and ground improvement at the same time. Despite the growing demand for hollow bar micropiles, little work has been devoted to evaluating the nominal bond strength between the micropile grout and the surrounding soil, especially in clayey soils. Moreover, the performance of such micropiles under different kinds of loading is still largely unknown and needs to be investigated.

In this study, a research methodology …


Thermal And Mechanical Studies Of Thin Spray-On Liner (Tsl) For Concrete Tunnel Linings, Taesang Ahn Nov 2011

Thermal And Mechanical Studies Of Thin Spray-On Liner (Tsl) For Concrete Tunnel Linings, Taesang Ahn

Electronic Thesis and Dissertation Repository

The thesis presents a summary of Thin Spray-On Liner (TSL) effects on concrete. Three aspects, fire insulation, adhesion strength on concrete surface and load carrying capacity (i.e. flexural strength) on segmental concrete liners, are presented. Small-scale to full-scale laboratory tests were conducted using ASTM standards or devised methods. The TSL effects on three aspects were then compared with the results for uncoated concrete specimens. Numerical analyses using TEMP/W for the thermal response of TSL and a FE program, ABAQUS for the mechanical response of TSL were respectively carried out and compared with the measured results. Additionally, numerical analyses in respect …