Civil and Environmental Engineering Commons^™

Co2 Storage Capacity And Injectivity Of Stacked Carbonates Of The Pennsylvanian And Permian In Western Nebraska, Lateef Lawal

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Geological carbon storage (GCS) is a critical aspect of carbon capture and storage (CCS) in which captured CO₂ from power plants and industrial processes is injected and stored securely underground. Potential subsurface rock formations include saline aquifers, depleted oil and gas reservoirs, unmineable coal seams and volcanic rocks. GCS technology has been proven in the United States and many other parts of the world as a net-zero carbon emission strategy to mitigate the current climate crisis of our planet. Unlike other states such as Wyoming, GCS projects are still in the early phases in Nebraska. The goal of this …

Evaluation Of An Equivalent Mean Grain Size Diameter To Rationally Predict The Erodibility Of Fine Riverbed Soils In Nebraska, Basil Abualshar

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The erosion of riverbed soils under the bridges is one of the major reasons that cause bridge closure or failure leading to a significant effect on the local economy. One of the commonly used methods to predict the erosion rate of soils is the excess shear stress method, which is based on two parameters describing the erodibility behavior; the erodibility coefficient and the critical shear stress. On the other hand, studies showed that the mean grain size diameter D₅₀ could be correlated to the erosion resistance of soils, usually for cohesionless soils but not for cohesive soils. It is …

Experimental And Numerical Analysis Of Soil-Geosynthetic Composite For A Geosynthetic-Reinforced Roadway System, Daniel Robertson

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The present research conducted tests to evaluate the reinforcing performance of geosynthetics including three geogrids (GG1, GG2, and GG3) and one geotextile (GT) for three different soil types – sand, clay, and red shale. All geosynthetics showed great improvement under the lowest confining pressure. The report concluded that between the Large-Scale Direct Shear test, the Large-Scale Pullout Box, and the FLAC simulation, the three geogrids showed the greatest improvement when conducted with sand. The sand could withstand a much greater normal pressure than either clay or red shale. The biaxial geogrids, GG1 and GG3, had ideal results for lower stress …

Viscoelastic Analysis And Fatigue Characterization Of Bituminous Materials In Two Length Scales Under The Influence Of Aging, Santosh Reddy Kommidi

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Fatigue cracking in asphalt concrete (AC) is of immense importance to pavement design and analysis because it is one of the most important forms of distress that can lead to structural failure in pavement. Once started, these types of cracks can be combined with other environmental factors leading to detrimental effects such as faster rates of pavement deterioration and shortened pavement life and functionality.

Currently AASHTO TP101, also known as linear amplitude sweep (LAS) specification, is being widely used to evaluate the ability of an asphalt binder to resist fatigue. The LAS method, although mechanistic in its approach, has certain …

Development Of Semi-Circular Bending (Scb) Fracture Test For Bituminous Mixtures, Gabriel Nsengiyumva

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Granted that most distresses in asphalt (flexible) concrete (AC) pavements are directly related to fracture, it becomes clear that identifying and characterizing fracture properties of AC mixtures is a critical step towards a better pavement design. This thesis examines the testing variables of a reliable and practical semicircular bending (SCB) test for evaluating the fracture characteristics of asphalt concrete mixtures at intermediate service temperature conditions. The first part of this thesis investigates the repeatability of the SCB fracture test method by integrating a statistical-experimental approach to identify testing variables of the SCB test that result in repeatable test results. Toward …

Viscoelastic, Fatigue Damage, And Permanent Deformation Characterization Of High Rap Bituminous Mixtures Using Fine Aggregate Matrix (Fam), Hesamaddin Nabizadeh

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Performance characteristics of bituminous mixtures play the most influential role in designing flexible pavement. These asphaltic mixtures can be considered as heterogeneous mixtures which composed of two primary components: fine aggregate matrix (FAM) phase and aggregate phase. The FAM phase acts as a critical phase in evaluating the performance characteristics including viscoelastic, fatigue damage, and permanent deformation characteristics of entire asphalt mixtures. This study evaluates the viscoelastic, fatigue damage and permanent deformation characteristics of bituminous mixtures containing 65% reclaimed asphalt pavement (RAP) by performing oscillatory torsional shear tests of cylindrical bars of FAM using a dynamic mechanical analyzer. Moreover, this …

Seepage And Stability Of A Dam In An Artesian Setting, Sean A. Parks

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Willow Creek Dam is located in a unique region on the boundary of a confined aquifer, where artesian conditions exist. Recently, groundwater levels have exceeded the elevation of the downstream berm well above anticipated piezometric elevations. It was presumed from limited evidence that these high piezometric levels resulted from pressure in the aquifer rather than from seepage out of the reservoir. The purpose of this investigation was to determine the relative contributions of the reservoir and the regional groundwater to observed piezometric levels and how these levels affect seepage exit gradients and slope stability of the dam.

Comparing the head …

Seamless Bridge And Roadway System For The U.S. Practice, Nima Ala

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Expansion joints are one of the main causes for high maintenance costs in bridges. The search for ideal expansion joints has proven fruitless. That is why it has been said that “the best joint is no joint”. A seamless bridge system is envisioned that results in bridges with long service lives by eliminating the joints over the entire length of the bridge, approach slab and a segment of the roadway called transition. All bridge thermal movements are dissipated to zero in the transition. The system is similar to a system developed in Australia but modifications had to be made to …

Effects Of Warm-Mix Asphalt Additives On Asphalt Mixture Characteristics And Pavement Performance, Jun Zhang

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The primary objective of this research is to evaluate the feasibility of several WMA mixtures as potential asphalt paving mixtures for Nebraska pavements. To that end, three well-known WMA additives (i.e., Sasobit, Evotherm, and Advera synthetic zeolite) were evaluated. For a more realistic evaluation of the WMA approaches, trial pavement sections of the WMA mixtures and their HMA counterparts were implemented in Antelope County, Nebraska. More than one ton of field-mixed loose mixtures were collected at the time of paving and were transported to the NDOR and UNL laboratories to conduct comprehensive laboratory evaluations and pavement performance predictions of the …

Effects Of Aggregates On Properties And Performance Of Mastics And Superpave Hot Mix Asphalt Mixtures, Francisco Aragão

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Superpave, a set of advancements in testing devices and specifications for asphalt binders and mixtures, was limited to address the effects of aggregates. Because aggregates represent around 95% in mass of the asphalt mixtures, it is important to understand how these materials affect properties and performance of such mixtures. This research focus on how different types and contents of aggregates affect properties of mastics and asphalt mixtures, and their performance considering the viscoelastic nature of the asphalt material.

Five different types of aggregates and hydrated lime were used for sample fabrication together with two different binders. Several different tests were …