Civil and Environmental Engineering Commons^™

Correlations Between Dynamic Probe Blow Count And Undrained Shear Strength For Peat At A Well-Characterised Raised Bog In Ireland, David Mchugh, Ciaran Reilly, Juan Pablo Osorio

Articles

Peat deposits are generally heterogeneous, with large variations over small areas. Peat has an extremely high water content, high compressibility and low shear strength. This presents a major issue in studying the geomechanical behavior of peat. For this study, field and laboratory tests were conducted to establish the undrained shear strength (s_u) of peat at a cutover industrial peatland in Ireland which had been extensively characterized in the past. The new field work included TRL-type Dynamic Cone Penetrometer, Mackintosh probe and field vane shear tests. A correlation was developed between the Mackintosh probe “M-value” blow count and the …

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

Geological Origin As An Input Variable In Reliability-Based Designs: For An Accurate Exploration In Geotechnical Engineering, Juan Camilo Viviescas, Juan Pablo Osorio

Conference papers

Soil is one of the most difficult materials to characterize realistically, which partly explains the uncertainty between the designs and the geostructures real behavior. Different recommendations have arisen with respect to carrying out field investigations in order to reduce the uncertainties inherent to the soil. However, the field exploration and the implementation of sophisticated geotechnical models have proven to be insufficient to mitigate the geotechnical uncertainty. Therefore, Reliability-Based Designs (RBD) emerge as a decision-making tool through the definition of the probability of failure in conjunction with the typical Factors of Safety. RBD requires a previous understanding of the most appropriate …

Development Of A New Electro-Osmotic Consolidation Apparatus, Yenni Mariana Ramírez-Mazo, Juan Pablo Osorio, Sergio Agudelo

Conference papers

Electro-osmotic consolidation is a ground improvement technique in which a DC voltage is applied to the soil via electrodes, in order to drain the water contained in the pores increasing the effective stress, and thus improving the geotechnical properties of the soil. The technique increases the shear strength, reduces the compressibility, and changes the chemical composition of the saturated soft clayey and silty soils to which it can be applied. Electro-osmotic consolidation has been successfully applied in different projects worldwide. This paper presents the development of a new electro-osmotic consolidation apparatus built at Universidad de Antioquia. Tests were carried on …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …

Probabilistic Analysis Of The Active Earth Pressure On Earth Retaining Walls For C‑Φ Soils According To The Mazindrani And Ganjali Method, Julian Osorio, Juan Camilo Viviescas, Juan Pablo Osorio

Articles

The determination of the earth pressure coefficients (K) in geotechnical engineering is one of the most critical procedures in designing earth retaining walls. However, most earth pressure theories are made for either clay or sands, where the c-ϕ soils are the least analysed. In this paper, an analysis of the earth pressure for drained mixed soils based in Mazindrani and Ganjali (J Geotech Geoenviron Eng 123:110–112, 1997) theory was carried out. Earth pressure coefficients are generally used in a deterministic way and can represent designs under an inadmissible risk. Therefore, Reliability-based design arises as an essential tool to deal with …

Soil Improvement By Electro-Osmotic Consolidation: Laboratory Testing, Yenni Mariana Ramírez-Mazo, Juan Pablo Osorio, Sergio C. Agudelo-Flórez

Conference papers

Electro-osmotic consolidation is a ground improvement technique that has been successfully implemented on the field and at laboratory scale since the 30s. However, its application has been done primarily through empirical procedures and experience. The determinant variables in the effectiveness and efficiency of the improvement are numerous and require further studies. This paper presents the evaluation of the improvement process of an inorganic low plasticity clay subjected to a 150 V/m voltage during 5780 minutes. The special analysis of the strains showed differential settlements, as well as cracking at the surface and with depth. The consolidations curves obtained follow the …

Análisis Por Confiabilidad Del Modelo De Diseño Aashto 93 Para Pavimentos Flexibles En El Valle De Aburrá, Mario Santiago Hernández, Juan Pablo Osorio, Juan Camilo Viviescas

Books/Book Chapters

La necesidad de construir pavimentos con mejores especificaciones técnicas y mayores períodos de servicio requiere de una modelación rigurosa de la variabilidad en las propiedades geotécnicas con el fin de garantizar la confiabilidad de estas estructuras. Por lo tanto, se realizó un análisis basado en la confiabilidad del método Aashto-93, considerando la variabilidad geotécnica del suelo, asociada al módulo resiliente de la subrasante. Los diseños por confiabilidad fueron efectuados de acuerdo con las categorías, parámetros y estructuras establecidas por el Manual de diseño de pavimentos asfálticos en vías con medios y altos volúmenes de tránsito, de 1998, del Instituto Nacional …

Discussion: Effect Of Bentonite Slurry Pressure On Interface Friction Of Pipe Jacking, Ciaran Reilly, Trevor Orr

Articles

Pipe jacking is a technique used to construct tunnels by pushing prefabricated pipes through the ground from an entrance shaft to an exit shaft. This technique is referred as microtunneling in U.S. terminology, therefore, in the rest of the text, pipejacking and microtunneling will be used as having the same meaning. Pipe jacking is a more economical alternative to segmental lined tunnels. However, the main limitation of pipe jacking is the jacking distance, which is directly dependent on the friction between the pipe and the soil. Therefore, reducing the friction between the pipe and soil is a critical issue in …

Influence Of Limit Equilibrium Methods In The Design Of Contiguous Cantilever Sheet Pile Walls Through Reliability-Based Analysis, Alvaro J. Mattos, Juan Camilo Viviescas, Juan Pablo Osorio

Conference papers

In geotechnical engineering the design of bored- pile walls is commonly performed in terms of the embedment length (D) defined according to the limit equilibrium methods (also known as balance methods) formulated by Krey, Blum, Rowe, Hansen and the empirical method of Look in sandy soils. The limit equilibrium methods are calculations associated with the shape of the earth pressures distributions in the shaft, earth pressures theories, geotechnical properties and safety factors, while the empirical criteria establish that the relationship between embedment and the free height (H) is of the order of D/H = 1.5. These design methods are complemented …

Electroósmosis: Un Método Para Mejorar El Suelo, Yenni Mariana Ramírez Mazo, Juan Pablo Osorio, Sergio Agudelo Florez

Articles

El suelo, ese que pisamos, recorremos, sobre el que construimos nuestras casas, escuelas, calles… ese en el que nos dicen que pongamos los pies cuando estamos algo distraídos, es más que simplemente tierra.

Geosynthetic Reinforcement For Unpaved Roads – Recent Experience, Ciaran Reilly, Keith Nell

Conference papers

Modern geosynthetic materials, including geotextiles and geogrids, are often used to generate savings in materials and time on construction projects. Geosynthetics are used as reinforcement and separation membranes for unpaved roads that are supported by low strength or unsuitable subgrades. When geosynthetics are used, unsuitable subgrades can be left in place and reduced thicknesses of road base are required. This paper reviews the design methods currently used to build geosynthetic reinforced unpaved roads and documents the validation of these design approaches. A number of recent case histories of projects in the UK and Ireland are outlined, showing the use of …

Where There Is No Engineer Chapter 06, Liam Mccarton, Sean O'Hogain

Books/Book Chapters

This chapter summarises the learning outcomes from the design program.

Reliability-Based Designs Procedure Of Earth Retaining Walls In Geotechnical Engineering, Juan Camilo Viviescas, Juan Pablo Osorio, Julio E. Canon

Articles

The design and construction of foundations, retaining structures and slopes are usually based on deterministic formulations that do not allow the distinction between the natural variability and the inherent dispersion in the geotechnical parameters. Due to the inherent variability of the soil properties, there is a growing trend to implement reliability-based designs in geotechnical engineering to reduce design uncertainties by probabilistic methods. The reliability designs require the definition of the probability density functions of the geotechnical properties, as well as knowledge of the spatial variability of soils. This paper identifies the procedures, type of soil investigations, simulations and the most …

Modelling Tree Contribution In Susceptibility Analysis Of Shallow Llandslides, Roberto José Marín Sánchez, Juan Pablo Osorio

Articles

In this paper an assessment of shallow landslides susceptibility in a tropical and mountainous terrain is made. A method that allows to model slope stability over large areas is used. Tree contribution is quantified by means of three parameters: rainfall interception, root reinforcement and tree surcharge. A rainfall interception model is used to determine the rain available for infiltration and its temporal distribution during the simulation. The hydrological models included in TRIGRS are described, which allows to determine the pore water pressure depending on the initial conditions. This pore water pressure is used in the revised infinite slope stability model, …

Reliability Analysis Of Active Earth Pressure For Cantilever Walls On Mudflows And Residual Soils Of The Aburrá Valley, Juan David Castro, Juan Camilo Viviescas, Juan Pablo Osorio

Conference papers

According to the variability of the local geology of the Aburrá Valley, two geological strata with similar grain size distribution were analyzed. The geologies are composed of mudflows and residual soils from the San Diego stock in the Poblado neighborhood. These soils show a similar mechanical behavior in relation to the number of blows of the standard penetration test SPT. The analysis was carried out by reliability methods for the determination of the active earth pressure for the geotechnical design of a cantilever walls. The analysis consists in the variation of the height of the retaining wall between 1 and …

Geology Influence In The Slope Stability Analysis By Limit Equilibrium, Finite Elements And Random Finite Elements Methods, Juan Camilo Viviescas, Juan Pablo Osorio

Conference papers

Slope stability analyzes correspond to the evaluation of the safety factors commonly performed through the limit equilibrium and finite element methods. Due to the uncertainty of the geotechnical parameters, different statistical methods have emerged such as the limit equilibrium combined with the Monte Carlo simulation method and the random finite elements, which have been widely accepted in recent years. Normally, these analyzes are not performed taking into account the geological influence on the geotechnical properties, so in this work we proceed with the comparison of several geometrical typologies of slopes for mudflows and a residual soils of the Stock San …

Effects Of Vegetation On Slope Stability: A Review, Roberto José Marín Sánchez, Juan Pablo Osorio

Articles

Slope stability is usually affected by factors that reduce soil strength and increase driving forces acting on the slope material, sometimes generating mass movements. Among these factors, vegetation has an important role related to hydrological (e.g. evapotranspiration and infiltration) and mechanical (e.g. tree surcharge and root reinforcement provided by trees) mechanisms. In this review, vegetation influences associated to slope stability are identified, describing the mechanisms involved in the occurrence of mass movements. Finally, the way these factors affect slope stability is explained according to soil properties, climatic conditions and environmental characteristics.

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

Evaluation Of Slope Stability Quantifying The Effect Of Vegetation, Roberto José Marín, Juan Pablo Osorio

Conference papers

The present study evaluates the shallow landslides susceptibility triggered by rainfall by means of multiple numerical simulations. The simulations integrate a transient rainfall infiltration model with an infinite slope stability model, both of them developed for unsaturated soils in a basin scale. TRIGRS’ infiltration model is used to calculate pore water pressure. The geotechnical model includes the evaluation of two parameters related to vegetation: root reinforcement and tree surcharge due to the weight of the vegetation. These simulations were carried out using multiple values of these parameters so that their behavior is analyzed for the topographic conditions of the watershed …

Propiedades Geotécnicas De La Turba Intervenida Antrópicamente, Juan Pablo Osorio

Conference papers

La intervención antrópica en turberas genera cambios significativos en las propiedades geotécnicas de un material orgánico, altamente compresible y con baja resistencia al esfuerzo cortante. Existen diferentes formas de intervención, dependiendo de las tradiciones de cada lugar. Sin embargo, los procesos de intervención más comunes son la precarga por medio de terraplenes y el drenaje, las cuales generan una reducción en el contenido de humedad, la compresibilidad y la permeabilidad, así como un incremento en la resistencia al esfuerzo cortante. En el presente artículo, se discute el efecto de la intervención antrópica en las propiedades geotécnicas de las turbas, a …

Caracterización De Las Propiedades Indices De Los Flujos De Lodos En 3 Km2 De La Ladera Oriental De La Ciudad De Medellín, Juan Camilo Viviescas, Juan Pablo Osorio

Conference papers

La caracterización de las propiedades índices de los geomateriales es una de las labores más importantes en la ingeniería geotécnica, al ser estos un insumo fundamental para la identificación y determinación de propiedades geomecánicas de los suelos. Las principales propiedades índices estudiadas en la geotecnia son el contenido de agua, los límites de Atterberg, la granulometría, el peso unitario y la gravedad específica, las cuales son la base para clasificación de suelos. En este artículo se presenta el análisis estadístico de las propiedades índices de suelos tipo flujo de lodos de la ladera oriental de Medellín, a partir del análisis …

Lynches Lane Reed & Willow Bed Facility Final Report South Dubin County Council, Liam Mccarton, Sean O'Hogain, Don Mcdonald, Anna Reid

Reports

This final report will present results from a two year study to monitor the performance of a hybrid reed willow bed facility at Lynches Lane, in the administrative area of South Dublin County Council (SDCC). Design specifications for the facility are presented. Monitoring results for a two year period including influent and effluent parameters, rainfall, potential evapotranspiration, and soil classification are also presented and discussed. During the two year monitoring period the system achieved a zero discharge. This report will discuss the potential application of similar systems within South Dublin County Council administrative area. This is in the context of …

Peat Improvement Under Vacuum Preloading:A Novel Approach For Bog Roads In Ireland, Juan Pablo Osorio, Eric R. Farrell, Brendan C. O'Kelly

Conference papers

This paper presents the preliminary findings of a TCD/NRA vacuum preloading field trial that is part of a research project into the construction options for improving rampart roads. Vacuum preloading is a construction method used to accelerate settlement and the increase shear strength by applying a vacuum pressure to the ground by means of prefabricated vertical drains, an impervious tight sheet and a vacuum pump. Consolidating the ground by applying a vacuum load has several advantages over other techniques, for example; no fill material is required; construction periods are generally shorter; and there is no need for chemical admixtures. This …

A Life Cycle Cost Analysis Of Large-Scale Thermal Energy Storage Technologies For Buildings Using Combined Heat And Power, Kenneth Gaine, Aidan Duffy

Conference Papers

Buildings account for approximately 40% of energy consumption and greenhouse gas (GHG) emissions in developed economies, of which approximately 55% of building energy is used for heating and cooling. The reduction of building-related GHG emissions is a high international policy priority. For this reason and because there are many technical solutions for this, these polices should involve significant improvements in the uptake of small-scale energy efficient (EE) systems. However the widespread deployment of many technologies, must overcome a number of barriers, one of which is a temporal (diurnal or seasonal) mismatch between supply and demand. Costeffective thermal storage solutions have …

Incorporating Spatial Data And Gis To Improve Sea Of Land Use Plans: Opportunities And Limitations: Case Studies In The Republic Of Ireland, Ainhoa Gonzalez Del Campo

Doctoral

This research aimed at establishing whether spatial data and Geographic Information Systems (GIS) can contribute to Strategic Environmental Assessment (SEA). To achieve this, an integrated GISEA approach was developed and applied to a number of spatial planning SEAs in the Republic of Ireland. The practical applicability of the approach was examined, evaluating the potential benefits derived from using spatial data and GIS in SEA and assessing the potential barriers to an effective GIS use. The implementation of the SEA Directive incorporated a new dimension into plan-making by calling for the assessment of potential environmental effects that may derive from implementing …

Rampart Roads In The Peat Lands Of Ireland: Genesis, Development And Current Performance, Juan Pablo Osorio, Eric R. Farrell, Brendan C. O'Kelly, Tom Casey

Articles

The construction and improvement of roads on peat lands has always been a challenging task in geotechnical engineering. Rampart roads, which are a particular feature of the bog roads in Ireland, are caused by the excavation of peat from the roadsides over many years for use as a domestic fuel. The historical development of rampart roads and current performance under the added traffic loading is discussed. Various road improvement methods have been applied to improve the road ability to carry traffic and the technical aspects and performance of the methods are discussed. In particular, the performance of the improvement methods …

Antennas For Portable Communications In The Uwb And Gps Spectra., Giuseppe Ruvio

Doctoral

The thesis describes a study of antennas for solutions in emerging systems. An account of the fundamental principles of these antennas is given together with an outline of the basic electromagnetic theory on which the designs are based. While the main focus is on antennas for Ultra Wideband (UWB) systems, some additional work was carried out on enhancing performance of circularly polarised antennas for satellite navigation systems. The study focussed on the design of highly efficient broadband antennas with particular requirements for size compactness, gain stability, phase-linearity, and the use of low-cost materials. These requirements are particularly important for UWB …

Drop Photometer Design., Kevin Tiernan

Doctoral

The tensiograph drop analyser, operating in the mode of ultraviolet-visual absorption photometer, was re-engineered to improve measurement accuracy. As well as instrumentation re-design, the other objective of the research was to analyse tensiograph signals to explore how their features are defined by drop properties. Using fibre optic technology, the tensiograph emits a light beam into a growing pendant drop whereupon it undergoes a number of internal reflections. A portion of the reflected light energy is coupled to a photodiode producing a proportional current that is electronically processed and transferred to a computer for analysis. The signal produced, known as the …