Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 15 of 15
Full-Text Articles in Chemical Engineering
Syntheses Of Na3V2(Po4)2O2F As A Cathode For Sodium Ion Battery Application, Kai Wu
Syntheses Of Na3V2(Po4)2O2F As A Cathode For Sodium Ion Battery Application, Kai Wu
Journal of Electrochemistry
High-temperature solid-state method, hydro-thermal method and solvo-thermal method have been mainly employed to synthesize Na3V2(PO4)2O2F (NVPF) cathode materials. However, these methods are energy consuming and complicated, which is not applicable for a large scale industrial production. In this study, a rather low-temperature (70℃) co-precipitation strategy was proposed to synthesize NVPF cathode materials. The as-prepared NVPF cathode materials showed a spherical shape with a diameter of 400 ~ 500 nm, and exhibited a sodium storage of 105.6 mAh·g-1 and an efficiency of 90.06%. After a simple thermal process, the specific capacity …
Stabilization Strategies Of Pt Catalysts Forproton Exchange Membrane Fuel Cells, Da-Ping He, Shi-Chun Mu
Stabilization Strategies Of Pt Catalysts Forproton Exchange Membrane Fuel Cells, Da-Ping He, Shi-Chun Mu
Journal of Electrochemistry
The low service lifetime of proton exchange membrane fuel cells (PEMFCs) is the main bottleneck for their commercial applications. One of the main factors is that the expensive metal Pt catalyst is easy to degradation under the harsh working environment of PEMFC (such as variable voltage, strong acidity, gas-liquid two-phase flow), which leads to the inevitable decay of the catalytic performance, thus, seriously restricting the lifetime of PEMFC. Therefore, the electrochemical stability of Pt-based electrocatalysts has become an important and hot topic to improve the PEMFC lifetime. In this paper, we review the recent development in enhancing the stability of …
Electrochemical Performances Of Neodymium Doped Lead Dioxide Composite Anode, Hong-Hui Wang, Ming-Jie Ma, Jie Feng, Huang-Ya Kang, Wen-Jie Huang
Electrochemical Performances Of Neodymium Doped Lead Dioxide Composite Anode, Hong-Hui Wang, Ming-Jie Ma, Jie Feng, Huang-Ya Kang, Wen-Jie Huang
Journal of Electrochemistry
Neodymium (Nd) doped titanium (Ti)-based lead dioxide (PbO2) composite anode was prepared by electrodeposition. The surface morphologies and crystal structures of the as-prepared anodes were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) technique, respectively. The electrochemical performances of PbO2-Nd anode were studied by electrochemical impedance spectroscopy, linear sweep voltammetry and cyclic voltammetry. Additionally, the electrocatalytic activity and durability of PbO2-Nd anode were investigated through the degradation of simulative refractory organic wastewater of phenol. The results showed that Nd doping made the PbO2 anode surface structure dense and uniform with smaller …
Hydrothermal One-Step Synthesis Of Layered Nickel/Cobalt Double Hydroxide With Using Shape-Directing Agent And Homogeneous Precipitating Agent, Li-Wei Zhu, Yun-Hai Yan, Hui Jia, Run-Fen Liang
Hydrothermal One-Step Synthesis Of Layered Nickel/Cobalt Double Hydroxide With Using Shape-Directing Agent And Homogeneous Precipitating Agent, Li-Wei Zhu, Yun-Hai Yan, Hui Jia, Run-Fen Liang
Journal of Electrochemistry
Nickel/cobalt double hydroxide (Ni/Co-DH) has been prepared by facile hydrothermal one-step synthesis method using hexamethylene tetramine (HMT) as a homogeneous precipitating agent and cetyltrimethylammonium bromide (CTAB) as a shape-directing agent. With the hydrolysis of HMT and the use of CTAB, the Ni/Co-DH could be synthesized without additional alkali source, and in the meantime, the Ni/Co-DH exhibited a controlled mesopore size of 13.4 nm and a large BET surface area of 93.6 m2 •g-1 . The X-ray diffraction (XRD) pattern displays that the Ni/Co-DH existed as a mixture of α-Ni(OH)2-β-Co(OH)2. The scanning electron microscope (SEM) …
The Study On Comparison Of Electrochemical Performance In Microbial Fuel Cell With Glucose And Sodium Acetate Acting As Substrates, Lei Fan, Yu Zhao, Ting Li, Qin-Bo Yuan, En-Zhi Wang, Xiao-Bin Wang, Jun-Wen Wang
The Study On Comparison Of Electrochemical Performance In Microbial Fuel Cell With Glucose And Sodium Acetate Acting As Substrates, Lei Fan, Yu Zhao, Ting Li, Qin-Bo Yuan, En-Zhi Wang, Xiao-Bin Wang, Jun-Wen Wang
Journal of Electrochemistry
By inoculating aerobic sludge and anaerobic sludge from the sewage treatment plant, two sets of dual-chamber microbial fuel cells (MFCs) were built with either glucose or sodium acetate acting as a substrate. Accordingly, the electrochemical performances of MFCs were explored with the concentration of the substrates being 0.0335 mol•L-1. The results of the comparative study in glucose system and sodium acetate system showed that the impedance values of anodic half cell were 222 Ω for glucose and 213.67 Ω for sodium acetate, implying no significant effect on the internal resistance in battery with the different substrates. The exchange …
Synthesis, Structure And Electrochemical Performance Of Na2Mnsio4/C Cathode Material For Na-Ion Batteries, Shou-Ding Li, Jiang-Huai Guo, Yong Xie, Jin-Xiao Mi, Yong Yang
Synthesis, Structure And Electrochemical Performance Of Na2Mnsio4/C Cathode Material For Na-Ion Batteries, Shou-Ding Li, Jiang-Huai Guo, Yong Xie, Jin-Xiao Mi, Yong Yang
Journal of Electrochemistry
As a promising cathode material for sodium ion batteries, pure phase Na2MnSiO4/C nanocomposite was successfully synthesized by a sol-gel method with a citric acid as a complex agent. The as prepared material was characterized by XRD, FTIR, SEM and TEM techniques. XRD and Rietveld refinement results indicated that the sample was indexed as monoclinic structure with space group of Pn. It was observed by SEM and TEM that the obtained product consisted of micro-scaled secondary particles, which were composed of NaMnSiO4 nanocrystallites and amorphous carbon network. More importantly, the uniform carbon network in the nanocomposite …
Preparation And Properties Of Binary Oxides CoXCr1-XO3/2 Electrocatalysts For Oxygen Evolution Reaction, Tai-Lai Yang, Wen-Yan Dong, Hui-Min Yang, Li Zhang, Zhen-Hai Liang
Preparation And Properties Of Binary Oxides CoXCr1-XO3/2 Electrocatalysts For Oxygen Evolution Reaction, Tai-Lai Yang, Wen-Yan Dong, Hui-Min Yang, Li Zhang, Zhen-Hai Liang
Journal of Electrochemistry
Binary metal mixed oxides of Co and Cr with nominal compositional formulas, CoxCr1-xO3/2 (x=0, 0.2, 0.4, 0.6, 0.8 and 1.0), were obtained by thermal decomposition method. The morphologies, crystal forms and valence states of the catalyst powders were analyzed by SEM, XRD and XPS, respectively. And the electrochemical properties, overpotentials and stabilities of CoxCr1-xO3/2 electrodes for oxygen evolution reaction (OER) in an alkaline solution were evaluated by linear sweep voltammetry (LSV), staircase voltammetry and chronoamperometry, respectively. The results indicated that the mixtures of Co3O4 and eskolaite-Cr2 …
Synthesis Of Namnpo4 By Spraying Drying-High Temperature Sintering And Its Electrochemical Performance, Xiao-Chen Lin, Xiao-Biao Wu, Xu Hou, Yong Yang
Synthesis Of Namnpo4 By Spraying Drying-High Temperature Sintering And Its Electrochemical Performance, Xiao-Chen Lin, Xiao-Biao Wu, Xu Hou, Yong Yang
Journal of Electrochemistry
As a cathode material for sodium ion batteries, NaMnPO4/C nanocomposite is successfully synthesized by the combination of spraying drying and high temperature sintering methods. The crystal structure of the as-synthesized phosphate material is confirmed as the natrophilite NaMnPO4, which possesses orthorhombic symmetry and Pmnb space group. It is shown that the precursors are hollow spherical particles and the obtained product consists of micro-scaled secondary particles, which are composed of NaMnPO4 nanocrystallites (tens of nanometres) and amorphous carbon networks. The ionic and electronic conductivities of NaMnPO4 are both effectively enhanced with the help of this …
Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Cu-Lscm-Ceo2 Catalyst Layer In The Thin Film Sofc, Yao Lv, Bo Huang, Xi-Zhi Gu, Chun-Yi Hou, Yi-Xing Hu, Xiao-Yin Wang, Xin-Jian Zhu
Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Cu-Lscm-Ceo2 Catalyst Layer In The Thin Film Sofc, Yao Lv, Bo Huang, Xi-Zhi Gu, Chun-Yi Hou, Yi-Xing Hu, Xiao-Yin Wang, Xin-Jian Zhu
Journal of Electrochemistry
Solid oxide fuel cell (SOFC) directly operating on hydrocarbon without external reforming has the potential of greatly speeding up the application of SOFCs for transportation. In this paper, a three-layer structure anode was fabricated by tape casting and screen printing method. The addition of Cu-LSCM-CeO2 to the supported anode surface presented better performance running on H2 and ethanol. The maximum power densities were 511 and 390 mW?cm-2, respectively, running on H2 and ethanol at 750 °C. No significant degradation was observed on the anode. Consequently, the Cu-LSCM-CeO2 catalyst layer on the surface of the …
Synthesis And Electrochemical Properties Of Li_3v_2(Po_4)_3/C Cathode Materials For Lithium Ion Battery, Li-Ying Liu, Hai-Yan Zhang, Lian Chen, Yu-Chun Zhai
Synthesis And Electrochemical Properties Of Li_3v_2(Po_4)_3/C Cathode Materials For Lithium Ion Battery, Li-Ying Liu, Hai-Yan Zhang, Lian Chen, Yu-Chun Zhai
Journal of Electrochemistry
Cathode material Li3V2( PO4) 3 /C for Lithium-ion battery was synthesized by combination of ball milling and baking. Physical and electrochemical performances of as-prepared materials were characterized through XRD,EIS and galvanostatic cell cycling. The results show that the products were monoclinic Li3 V2 ( PO4) 3 with well-developed crystal structure. At 0. 1C,0. 25C and 0. 5C,the initial discharge capacities were 150. 6,134. 1 and 107. 1 mAh·g-1 ,respectively. Capacity retention rates were 87. 3% after 130 cycles at 0. 25C and 87. 2% after 105 cycles at 0. 5C. Charge-discharge efficiencies were all above 80% and the average discharge …
Synthesis,Characteristics And Electrochemical Performance Of Nano-Sized Snco/Graphite Composites As Anode For Lithium Ion Batteries, Jin-Shu Cai, Ling Huang, Fu-Sheng Ke, Shi-Gang Sun
Synthesis,Characteristics And Electrochemical Performance Of Nano-Sized Snco/Graphite Composites As Anode For Lithium Ion Batteries, Jin-Shu Cai, Ling Huang, Fu-Sheng Ke, Shi-Gang Sun
Journal of Electrochemistry
The nano-structural Sn-Co/graphite composites were prepared by chemical reduction of the alloy electroless deposition solution in graphite suspensions,and the composites were annealed at 500 ℃.The phase structure and surface morphology of the composites were measured by XRD、SEM and Raman.The results indicate that there were high dispersions and high loadings of Sn-Co nanoparticles on graphite by thermal treatment.Electrochemical lithium storage performance was studied preliminarily on the obtained samples.The graphite modified with the Sn-Co nanoparticles possessed a higher electrochemical reversible capacity than that of graphite during the charge and discharge process.The appetency between the Sn-Co nanoparticles and graphite can effectively reduce or …
Ion-Implanting Modification Of Layered Manganese Dioxide And Its Electrochemical Performance, He-Ning Huang, Dong-Ping Lv, Xing-Kang Huang, Qi-Wei Zhang, Yong Yang
Ion-Implanting Modification Of Layered Manganese Dioxide And Its Electrochemical Performance, He-Ning Huang, Dong-Ping Lv, Xing-Kang Huang, Qi-Wei Zhang, Yong Yang
Journal of Electrochemistry
Layered MnO2(δ-MnO2) was prepared by thermal decomposition of potassium permanganate.Ti was ion-implanted into such δ-MnO2 by physical techniques,forming a composite(δ-MnO2-Ti).These materials were characterized by XRD,SEM,XPS techniques and their electrochemical proprieties were investigated.The results showed that the layered structure of δ-MnO2 did not been destroyed after Ti ion implantation,and the implanted Ti element was mainly Ti4+ as indicated by XPS.Both of the first and the highest discharge specific capacities of the ion-implanted layered MnO2(δ-MnO2-Ti),compared to those of δ-MnO2,were improved significantly.
Electrochemical Performance Of Li_(1-X)M_Xfepo_4 Cathode Materials Synthesized By Polymer Pyrolysis Route, Ting Li, Jiang-Feng Qian, Yu-Liang Cao, Han-Xi Yang, Xin-Ping Ai
Electrochemical Performance Of Li_(1-X)M_Xfepo_4 Cathode Materials Synthesized By Polymer Pyrolysis Route, Ting Li, Jiang-Feng Qian, Yu-Liang Cao, Han-Xi Yang, Xin-Ping Ai
Journal of Electrochemistry
Olivine Li1-xMxFePO4(M=Cr3+、Mg2+、Mn2+、Ni2+)were synthesized by a polyacrylates-pyrolysis route.The structural and electrochemical properties of the as-synthesized cathode materials were investigated by powder X-ray diffraction(XRD),scanning electron microscopy(SEM),and electrochemical charge/discharge cycling.The results indicate that the metallic ions doped at low concentration do not affect the crystalline structure of the material,but considerably improve the rate capability and cycle performance of LiFePO4 at high rate.
The Influence Of Pva As Disperser On Lifepo_(4) Synthesized By Hydrothermal Reaction, Hui-Lin Li, Hui Zhan
The Influence Of Pva As Disperser On Lifepo_(4) Synthesized By Hydrothermal Reaction, Hui-Lin Li, Hui Zhan
Journal of Electrochemistry
LiFePO_(4) was synthesized by means of hydrothermal reaction,in which PVA acts as disperser and glucose as carbon source.The samples were characterized by X-ray diffraction,scanning electron microscopy and electrochemical measurement.SEM results show that the sample is homogeneously composed of grains with a particle size of ca.200nm.In the charge/discharge test,the products exhibited a 3.45V discharge voltage plateau and a maximum specific capacity of 140mAh/g.After 40 cycles,its capacity only declined by 2.1%.Besides these,the mechanism for the influence of the particle size and carbon coating on the electrochemical property of LiFePO_(4)material was discussed in detail.
The Synthesis, Characteristics And Performance Of Cnt Composites As Anodic Materials In Litium-Ion Battery, Quan-Feng Dong, Ming-Sen Zheng, Zhen-Cai Huang, Ming-Gang Jin, Ya-Ding Zhan, Zu-Geng Lin
The Synthesis, Characteristics And Performance Of Cnt Composites As Anodic Materials In Litium-Ion Battery, Quan-Feng Dong, Ming-Sen Zheng, Zhen-Cai Huang, Ming-Gang Jin, Ya-Ding Zhan, Zu-Geng Lin
Journal of Electrochemistry
As an anodic material for lithium ion battery the carbon nano-tube (CNT) and some compounds based on tin have ever been investigated intensively. The fruited progress has not been made yet, however. In this paper the composites of CNT and Sn/SnO_(2)were synthesized employing two methods and characterized by SEM and XRD. And the electrochemical performance of the composites was investigated.